c12s-kubespray/docs/vars.md

191 lines
9.9 KiB
Markdown
Raw Permalink Normal View History

2019-12-04 15:22:57 +00:00
# Configurable Parameters in Kubespray
2016-12-22 16:57:39 +00:00
2019-12-04 15:22:57 +00:00
## Generic Ansible variables
2016-12-22 16:57:39 +00:00
You can view facts gathered by Ansible automatically
[here](http://docs.ansible.com/ansible/playbooks_variables.html#information-discovered-from-systems-facts).
Some variables of note include:
* *ansible_user*: user to connect to via SSH
* *ansible_default_ipv4.address*: IP address Ansible automatically chooses.
Generated based on the output from the command ``ip -4 route get 8.8.8.8``
2019-12-04 15:22:57 +00:00
## Common vars that are used in Kubespray
2016-12-22 16:57:39 +00:00
* *calico_version* - Specify version of Calico to use
* *calico_cni_version* - Specify version of Calico CNI plugin to use
* *docker_version* - Specify version of Docker to used (should be quoted
string). Must match one of the keys defined for *docker_versioned_pkg*
in `roles/container-engine/docker/vars/*.yml`.
2016-12-22 16:57:39 +00:00
* *etcd_version* - Specify version of ETCD to use
* *ipip* - Enables Calico ipip encapsulation by default
* *kube_network_plugin* - Sets k8s network plugin (default Calico)
2016-12-22 16:57:39 +00:00
* *kube_proxy_mode* - Changes k8s proxy mode to iptables mode
* *kube_version* - Specify a given Kubernetes hyperkube version
* *searchdomains* - Array of DNS domains to search when looking up hostnames
* *nameservers* - Array of nameservers to use for DNS lookup
* *preinstall_selinux_state* - Set selinux state, permitted values are permissive and disabled.
2016-12-22 16:57:39 +00:00
2019-12-04 15:22:57 +00:00
## Addressing variables
2016-12-22 16:57:39 +00:00
* *ip* - IP to use for binding services (host var)
* *access_ip* - IP for other hosts to use to connect to. Often required when
deploying from a cloud, such as OpenStack or GCE and you have separate
2016-12-22 16:57:39 +00:00
public/floating and private IPs.
2017-06-16 17:25:46 +00:00
* *ansible_default_ipv4.address* - Not Kubespray-specific, but it is used if ip
2016-12-22 16:57:39 +00:00
and access_ip are undefined
* *loadbalancer_apiserver* - If defined, all hosts will connect to this
address instead of localhost for kube-masters and kube-master[0] for
kube-nodes. See more details in the
[HA guide](https://github.com/kubernetes-sigs/kubespray/blob/master/docs/ha-mode.md).
* *loadbalancer_apiserver_localhost* - makes all hosts to connect to
the apiserver internally load balanced endpoint. Mutual exclusive to the
`loadbalancer_apiserver`. See more details in the
[HA guide](https://github.com/kubernetes-sigs/kubespray/blob/master/docs/ha-mode.md).
2016-12-22 16:57:39 +00:00
2019-12-04 15:22:57 +00:00
## Cluster variables
2016-12-22 16:57:39 +00:00
Kubernetes needs some parameters in order to get deployed. These are the
2018-10-19 15:12:37 +00:00
following default cluster parameters:
2016-12-22 16:57:39 +00:00
* *cluster_name* - Name of cluster (default is cluster.local)
* *dns_domain* - Name of cluster DNS domain (default is cluster.local)
2016-12-22 16:57:39 +00:00
* *kube_network_plugin* - Plugin to use for container networking
* *kube_service_addresses* - Subnet for cluster IPs (default is
10.233.0.0/18). Must not overlap with kube_pods_subnet
* *kube_pods_subnet* - Subnet for Pod IPs (default is 10.233.64.0/18). Must not
overlap with kube_service_addresses.
* *kube_network_node_prefix* - Subnet allocated per-node for pod IPs. Remaining
2016-12-22 16:57:39 +00:00
bits in kube_pods_subnet dictates how many kube-nodes can be in cluster.
* *skydns_server* - Cluster IP for DNS (default is 10.233.0.3)
* *skydns_server_secondary* - Secondary Cluster IP for CoreDNS used with coredns_dual deployment (default is 10.233.0.4)
* *enable_coredns_k8s_external* - If enabled, it configures the [k8s_external plugin](https://coredns.io/plugins/k8s_external/)
on the CoreDNS service.
* *coredns_k8s_external_zone* - Zone that will be used when CoreDNS k8s_external plugin is enabled
(default is k8s_external.local)
* *enable_coredns_k8s_endpoint_pod_names* - If enabled, it configures endpoint_pod_names option for kubernetes plugin.
on the CoreDNS service.
2016-12-22 16:57:39 +00:00
* *cloud_provider* - Enable extra Kubelet option if operating inside GCE or
OpenStack (default is unset)
* *kube_hostpath_dynamic_provisioner* - Required for use of PetSets type in
Kubernetes
* *kube_feature_gates* - A list of key=value pairs that describe feature gates for
alpha/experimental Kubernetes features. (defaults is `[]`)
2017-06-27 04:27:25 +00:00
* *authorization_modes* - A list of [authorization mode](
https://kubernetes.io/docs/admin/authorization/#using-flags-for-your-authorization-module)
that the cluster should be configured for. Defaults to `['Node', 'RBAC']`
(Node and RBAC authorizers).
Note: `Node` and `RBAC` are enabled by default. Previously deployed clusters can be
converted to RBAC mode. However, your apps which rely on Kubernetes API will
require a service account and cluster role bindings. You can override this
setting by setting authorization_modes to `[]`.
2016-12-22 16:57:39 +00:00
Note, if cloud providers have any use of the ``10.233.0.0/16``, like instances'
private addresses, make sure to pick another values for ``kube_service_addresses``
and ``kube_pods_subnet``, for example from the ``172.18.0.0/16``.
2019-12-04 15:22:57 +00:00
## DNS variables
2016-12-22 16:57:39 +00:00
By default, hosts are set up with 8.8.8.8 as an upstream DNS server and all
2016-12-22 16:57:39 +00:00
other settings from your existing /etc/resolv.conf are lost. Set the following
variables to match your requirements.
* *upstream_dns_servers* - Array of upstream DNS servers configured on host in
2017-06-16 17:25:46 +00:00
addition to Kubespray deployed DNS
* *nameservers* - Array of DNS servers configured for use by hosts
2016-12-22 16:57:39 +00:00
* *searchdomains* - Array of up to 4 search domains
For more information, see [DNS
Stack](https://github.com/kubernetes-sigs/kubespray/blob/master/docs/dns-stack.md).
2016-12-22 16:57:39 +00:00
2019-12-04 15:22:57 +00:00
## Other service variables
2016-12-22 16:57:39 +00:00
* *docker_options* - Commonly used to set
``--insecure-registry=myregistry.mydomain:5000``
* *docker_plugins* - This list can be used to define [Docker plugins](https://docs.docker.com/engine/extend/) to install.
2016-12-22 16:57:39 +00:00
* *http_proxy/https_proxy/no_proxy* - Proxy variables for deploying behind a
proxy. Note that no_proxy defaults to all internal cluster IPs and hostnames
that correspond to each node.
* *kubelet_deployment_type* - Controls which platform to deploy kubelet on.
2019-04-29 08:14:20 +00:00
Available options are ``host`` and ``docker``. ``docker`` mode
is unlikely to work on newer releases. Starting with Kubernetes v1.7
series, this now defaults to ``host``. Before v1.7, the default was Docker.
This is because of cgroup [issues](https://github.com/kubernetes/kubernetes/issues/43704).
* *kubelet_load_modules* - For some things, kubelet needs to load kernel modules. For example,
dynamic kernel services are needed for mounting persistent volumes into containers. These may not be
loaded by preinstall kubernetes processes. For example, ceph and rbd backed volumes. Set this variable to
true to let kubelet load kernel modules.
* *kubelet_cgroup_driver* - Allows manual override of the
cgroup-driver option for Kubelet. By default autodetection is used
to match Docker configuration.
2019-04-29 08:14:20 +00:00
* *kubelet_rotate_certificates* - Auto rotate the kubelet client certificates by requesting new certificates
from the kube-apiserver when the certificate expiration approaches.
* *node_labels* - Labels applied to nodes via kubelet --node-labels parameter.
For example, labels can be set in the inventory as variables or more widely in group_vars.
*node_labels* can be defined either as a dict or a comma-separated labels string:
2019-12-04 15:22:57 +00:00
```yml
node_labels:
label1_name: label1_value
label2_name: label2_value
2019-05-19 19:31:10 +00:00
node_labels: "label1_name=label1_value,label2_name=label2_value"
```
2019-12-04 15:22:57 +00:00
* *node_taints* - Taints applied to nodes via kubelet --register-with-taints parameter.
For example, taints can be set in the inventory as variables or more widely in group_vars.
*node_taints* has to be defined as a list of strings in format `key=value:effect`, e.g.:
2019-12-04 15:22:57 +00:00
```yml
node_taints:
- "node.example.com/external=true:NoSchedule"
```
2019-12-04 15:22:57 +00:00
* *podsecuritypolicy_enabled* - When set to `true`, enables the PodSecurityPolicy admission controller and defines two policies `privileged` (applying to all resources in `kube-system` namespace and kubelet) and `restricted` (applying all other namespaces).
Addons deployed in kube-system namespaces are handled.
* *kubernetes_audit* - When set to `true`, enables Auditing.
The auditing parameters can be tuned via the following variables (which default values are shown below):
* `audit_log_path`: /var/log/audit/kube-apiserver-audit.log
* `audit_log_maxage`: 30
* `audit_log_maxbackups`: 1
* `audit_log_maxsize`: 100
* `audit_policy_file`: "{{ kube_config_dir }}/audit-policy/apiserver-audit-policy.yaml"
By default, the `audit_policy_file` contains [default rules](https://github.com/kubernetes-sigs/kubespray/blob/master/roles/kubernetes/master/templates/apiserver-audit-policy.yaml.j2) that can be overridden with the `audit_policy_custom_rules` variable.
2016-12-22 16:57:39 +00:00
2019-12-04 15:22:57 +00:00
### Custom flags for Kube Components
For all kube components, custom flags can be passed in. This allows for edge cases where users need changes to the default deployment that may not be applicable to all deployments. This can be done by providing a list of flags. The `kubelet_node_custom_flags` apply kubelet settings only to nodes and not masters. Example:
2019-12-04 15:22:57 +00:00
```yml
2017-04-14 21:33:04 +00:00
kubelet_custom_flags:
- "--eviction-hard=memory.available<100Mi"
- "--eviction-soft-grace-period=memory.available=30s"
- "--eviction-soft=memory.available<300Mi"
```
2019-12-04 15:22:57 +00:00
2017-04-14 21:33:04 +00:00
The possible vars are:
2019-12-04 15:22:57 +00:00
2017-04-14 21:33:04 +00:00
* *kubelet_custom_flags*
* *kubelet_node_custom_flags*
2017-04-14 21:33:04 +00:00
2019-12-04 15:22:57 +00:00
Extra flags for the API server, controller, and scheduler components can be specified using these variables,
in the form of dicts of key-value pairs of configuration parameters that will be inserted into the kubeadm YAML config file:
2019-12-04 15:22:57 +00:00
* *kube_kubeadm_apiserver_extra_args*
* *kube_kubeadm_controller_extra_args*
* *kube_kubeadm_scheduler_extra_args*
## App variables
* *helm_version* - Defaults to v2.x, set to a v3 version (e.g. `v3.0.1` ) to install Helm 3.x (no more Tiller!). When changing this to 3 in an existing cluster, Tiller will be left alone and has to be removed manually.
2019-12-04 15:22:57 +00:00
## User accounts
2016-12-22 16:57:39 +00:00
By default, a user with admin rights is created, named `kube`.
The password can be viewed after deployment by looking at the file
`{{ credentials_dir }}/kube_user.creds` (`credentials_dir` is set to `{{ inventory_dir }}/credentials` by default). This contains a randomly generated
password. If you wish to set your own password, just precreate/modify this
file yourself or change `kube_api_pwd` var.