c12s-kubespray/roles/network_plugin/contiv/defaults/main.yml

56 lines
1.5 KiB
YAML
Raw Normal View History

contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
---
contiv_config_dir: "{{ kube_config_dir }}/contiv"
contiv_etcd_conf_dir: "/etc/contiv/etcd"
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
contiv_etcd_data_dir: "/var/lib/etcd/contiv-data"
contiv_netmaster_port: 9999
contiv_cni_version: 0.1.0
2018-09-17 14:45:05 +00:00
# No need to download it by default, but must be defined
contiv_etcd_image_repo: "{{ etcd_image_repo }}"
contiv_etcd_image_tag: "{{ etcd_image_tag }}"
2018-09-17 14:45:05 +00:00
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
contiv_etcd_listen_port: 6666
contiv_etcd_peer_port: 6667
contiv_etcd_endpoints: |-
{% for host in groups['kube-master'] -%}
contiv_etcd{{ loop.index }}=http://{{ hostvars[host]['ip'] | default(hostvars[host].ansible_default_ipv4['address']) }}:{{ contiv_etcd_peer_port }}{% if not loop.last %},{% endif %}
{%- endfor %}
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
# Parameters for Contiv api-proxy
contiv_enable_api_proxy: true
contiv_api_proxy_port: 10000
contiv_generate_certificate: true
# Forwarding mode: bridge or routing
contiv_fwd_mode: routing
# Fabric mode: aci, aci-opflex or default
contiv_fabric_mode: default
# Default netmode: vxlan or vlan
2018-09-17 14:45:05 +00:00
contiv_net_mode: vxlan
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
# Dataplane interface
contiv_vlan_interface: ""
2018-09-17 14:45:05 +00:00
# Default loglevels are INFO
contiv_netmaster_loglevel: "WARN"
contiv_netplugin_loglevel: "WARN"
contiv_ovsdb_server_loglevel: "warn"
contiv_ovs_vswitchd_loglevel: "warn"
# VxLAN port
contiv_vxlan_port: 4789
contiv network support (#1914) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
# Default network configuration
contiv_networks:
- name: contivh1
subnet: "10.233.128.0/18"
gateway: "10.233.128.1"
nw_type: infra
- name: default-net
subnet: "{{ kube_pods_subnet }}"
gateway: "{{ kube_pods_subnet|ipaddr('net')|ipaddr(1)|ipaddr('address') }}"
pkt_tag: 10