diff --git a/contrib/terraform/openstack/README.md b/contrib/terraform/openstack/README.md index 6ff0860ca..a92693b97 100644 --- a/contrib/terraform/openstack/README.md +++ b/contrib/terraform/openstack/README.md @@ -17,32 +17,33 @@ to actually install kubernetes and stand up the cluster. ### Networking The configuration includes creating a private subnet with a router to the -external net. It will allocate floating-ips from a pool and assign them to the +external net. It will allocate floating IPs from a pool and assign them to the hosts where that makes sense. You have the option of creating bastion hosts -inside the private subnet to access the nodes there. +inside the private subnet to access the nodes there. Alternatively, a node with +a floating IP can be used as a jump host to nodes without. ### Kubernetes Nodes You can create many different kubernetes topologies by setting the number of different classes of hosts. For each class there are options for allocating -floating ip addresses or not. -- Master Nodes with etcd +floating IP addresses or not. +- Master nodes with etcd - Master nodes without etcd - Standalone etcd hosts - Kubernetes worker nodes -Note that the ansible script will report an invalid configuration if you wind up +Note that the Ansible script will report an invalid configuration if you wind up with an even number of etcd instances since that is not a valid configuration. ### Gluster FS -The terraform configuration supports provisioning of an optional GlusterFS +The Terraform configuration supports provisioning of an optional GlusterFS shared file system based on a separate set of VMs. To enable this, you need to -specify -- the number of gluster hosts +specify: +- the number of Gluster hosts (minimum 2) - Size of the non-ephemeral volumes to be attached to store the GlusterFS bricks - Other properties related to provisioning the hosts Even if you are using Container Linux by CoreOS for your cluster, you will still -need the GlusterFS VMs to be based on either Debian or RedHat based images, +need the GlusterFS VMs to be based on either Debian or RedHat based images. Container Linux by CoreOS cannot serve GlusterFS, but can connect to it through binaries available on hyperkube v1.4.3_coreos.0 or higher. @@ -50,9 +51,9 @@ binaries available on hyperkube v1.4.3_coreos.0 or higher. - [Install Terraform](https://www.terraform.io/intro/getting-started/install.html) - [Install Ansible](http://docs.ansible.com/ansible/latest/intro_installation.html) -- you already have a suitable OS image in glance -- you already have a floating-ip pool created -- you have security-groups enabled +- you already have a suitable OS image in Glance +- you already have a floating IP pool created +- you have security groups enabled - you have a pair of keys generated that can be used to secure the new hosts ## Module Architecture @@ -67,7 +68,7 @@ any external references to the floating IP (e.g. DNS) that would otherwise have to be updated. You can force your existing IPs by modifying the compute variables in -`kubespray.tf` as +`kubespray.tf` as follows: ``` k8s_master_fips = ["151.101.129.67"] @@ -75,14 +76,25 @@ k8s_node_fips = ["151.101.129.68"] ``` ## Terraform -Terraform will be used to provision all of the OpenStack resources. It is also -used to deploy and provision the software requirements. +Terraform will be used to provision all of the OpenStack resources with base software as appropriate. -### Prep +### Configuration -#### OpenStack +#### Inventory files -No provider variables are hard coded inside `variables.tf` because Terraform +Create an inventory directory for your cluster by copying the existing sample and linking the `hosts` script (used to build the inventory based on Terraform state): + +```ShellSession +$ cp -LRp contrib/terraform/openstack/sample-inventory inventory/$CLUSTER +$ ln -s contrib/terraform/openstack/hosts inventory/$CLUSTER/ +$ cd inventory/$CLUSTER +``` + +This will be the base for subsequent Terraform commands. + +#### OpenStack access and credentials + +No provider variables are hardcoded inside `variables.tf` because Terraform supports various authentication method for OpenStack, between identity v2 and v3 API, `openrc` or `clouds.yaml`. @@ -90,15 +102,15 @@ These are examples and may vary depending on your OpenStack cloud provider, for an exhaustive list on how to authenticate on OpenStack with Terraform please read the [OpenStack provider documentation](https://www.terraform.io/docs/providers/openstack/). -##### Recommended method : clouds.yaml +##### Recommended method: clouds.yaml -Newer recommended authentication method is to use a `clouds.yaml` file that can be store in : +Newer recommended authentication method is to use a `clouds.yaml` file that can be store in: * `Current Directory` * `~/.config/openstack` * `/etc/openstack` -`clouds.yaml` : +`clouds.yaml`: ``` clouds: @@ -180,14 +192,11 @@ unset OS_PROJECT_DOMAIN_ID set OS_PROJECT_DOMAIN_NAME=Default ``` -### Terraform Variables +#### Cluster variables The construction of the cluster is driven by values found in [variables.tf](variables.tf). -The best way to set these values is to create a file in the project's root -directory called something like`my-terraform-vars.tfvars`. Many of the -variables are obvious. Here is a summary of some of the more interesting -ones: +For your cluster, edit `inventory/$CLUSTER/cluster.tf`. |Variable | Description | |---------|-------------| @@ -208,9 +217,9 @@ ones: |`number_of_gfs_nodes_no_floating_ip` | Number of gluster servers to provision. | | `gfs_volume_size_in_gb` | Size of the non-ephemeral volumes to be attached to store the GlusterFS bricks | -### Terraform files +#### Terraform state files -In the root folder, the following files might be created (either by Terraform +In the cluster's inventory folder, the following files might be created (either by Terraform or manually), to prevent you from pushing them accidentally they are in a `.gitignore` file in the `terraform/openstack` directory : @@ -221,49 +230,56 @@ or manually), to prevent you from pushing them accidentally they are in a You can still add them manually if you want to. -## Initializing Terraform +### Initialization -Before Terraform can operate on your cluster you need to install required -plugins. This is accomplished with the command +Before Terraform can operate on your cluster you need to install the required +plugins. This is accomplished as follows: -```bash +```ShellSession +$ cd inventory/$CLUSTER $ terraform init contrib/terraform/openstack ``` -## Provisioning Cluster with Terraform -You can apply the terraform config to your cluster with the following command -issued from the project's root directory -```bash -$ terraform apply -state=contrib/terraform/openstack/terraform.tfstate -var-file=my-terraform-vars.tfvars contrib/terraform/openstack +This should finish fairly quickly telling you Terraform has successfully initialized and loaded necessary modules. + +### Provisioning cluster +You can apply the Terraform configuration to your cluster with the following command +issued from your cluster's inventory directory (`inventory/$CLUSTER`): +```ShellSession +$ terraform apply -var-file=cluster.tf ../../contrib/terraform/openstack ``` if you chose to create a bastion host, this script will create -`contrib/terraform/openstack/k8s-cluster.yml` with an ssh command for ansible to -be able to access your machines tunneling through the bastion's ip adress. If +`contrib/terraform/openstack/k8s-cluster.yml` with an ssh command for Ansible to +be able to access your machines tunneling through the bastion's IP address. If you want to manually handle the ssh tunneling to these machines, please delete or move that file. If you want to use this, just leave it there, as ansible will pick it up automatically. +### Destroying cluster +You can destroy your new cluster with the following command issued from the cluster's inventory directory: -## Destroying Cluster with Terraform -You can destroy a config deployed to your cluster with the following command -issued from the project's root directory -```bash -$ terraform destroy -state=contrib/terraform/openstack/terraform.tfstate -var-file=my-terraform-vars.tfvars contrib/terraform/openstack +```ShellSession +$ terraform destroy -var-file=cluster.tf ../../contrib/terraform/openstack ``` -## Debugging Cluster Provisioning +### Debugging You can enable debugging output from Terraform by setting -`OS_DEBUG` to 1 and`TF_LOG` to`DEBUG` before runing the terraform command +`OS_DEBUG` to 1 and`TF_LOG` to`DEBUG` before running the Terraform command. -## Terraform output +### Terraform output -Terraform can output useful values that need to be reused if you want to use Kubernetes OpenStack cloud provider with Neutron/Octavia LBaaS or Cinder persistent Volume provisioning: +Terraform can output values that are useful for configure Neutron/Octavia LBaaS or Cinder persistent volume provisioning as part of your Kubernetes deployment: - - `private_subnet_id`: the subnet where your instances are running, maps to `openstack_lbaas_subnet_id` - - `floating_network_id`: the network_id where the floating IP are provisioned, maps to `openstack_lbaas_floating_network_id` + - `private_subnet_id`: the subnet where your instances are running is used for `openstack_lbaas_subnet_id` + - `floating_network_id`: the network_id where the floating IP are provisioned is used for `openstack_lbaas_floating_network_id` + +## Ansible + +### Node access + +#### SSH -# Running the Ansible Script Ensure your local ssh-agent is running and your ssh key has been added. This step is required by the terraform provisioner: @@ -272,11 +288,22 @@ $ eval $(ssh-agent -s) $ ssh-add ~/.ssh/id_rsa ``` +If you have deployed and destroyed a previous iteration of your cluster, you will need to clear out any stale keys from your SSH "known hosts" file ( `~/.ssh/known_hosts`). -Make sure you can connect to the hosts: +#### Bastion host + +If you are not using a bastion host, but not all of your nodes have floating IPs, create a file `inventory/$CLUSTER/group_vars/no-floating.yml` with the following content. Use one of your nodes with a floating IP (this should have been output at the end of the Terraform step) and the appropriate user for that OS, or if you have another jump host, use that. ``` -$ ansible -i contrib/terraform/openstack/hosts -m ping all +ansible_ssh_common_args: '-o ProxyCommand="ssh -o StrictHostKeyChecking=no -W %h:%p -q USER@MASTER_IP"' +``` + +#### Test access + +Make sure you can connect to the hosts. Note that Container Linux by CoreOS will have a state `FAILED` due to Python not being present. This is okay, because Python will be installed during bootstrapping, so long as the hosts are not `UNREACHABLE`. + +``` +$ ansible -i inventory/$CLUSTER/hosts -m ping all example-k8s_node-1 | SUCCESS => { "changed": false, "ping": "pong" @@ -291,21 +318,17 @@ example-k8s-master-1 | SUCCESS => { } ``` -if you are deploying a system that needs bootstrapping, like Container Linux by -CoreOS, these might have a state`FAILED` due to Container Linux by CoreOS not -having python. As long as the state is not`UNREACHABLE`, this is fine. +If it fails try to connect manually via SSH. It could be something as simple as a stale host key. -if it fails try to connect manually via SSH ... it could be something as simple as a stale host key. +### Configure cluster variables -## Configure Cluster variables - -Edit `inventory/sample/group_vars/all.yml`: -- Set variable **bootstrap_os** according selected image +Edit `inventory/$CLUSTER/group_vars/all.yml`: +- Set variable **bootstrap_os** appropriately for your desired image: ``` # Valid bootstrap options (required): ubuntu, coreos, centos, none bootstrap_os: coreos ``` -- **bin_dir** +- **bin_dir**: ``` # Directory where the binaries will be installed # Default: @@ -313,20 +336,19 @@ bootstrap_os: coreos # For Container Linux by CoreOS: bin_dir: /opt/bin ``` -- and **cloud_provider** +- and **cloud_provider**: ``` cloud_provider: openstack ``` -Edit `inventory/sample/group_vars/k8s-cluster.yml`: -- Set variable **kube_network_plugin** according selected networking +Edit `inventory/$CLUSTER/group_vars/k8s-cluster.yml`: +- Set variable **kube_network_plugin** to your desired networking plugin. + - **flannel** works out-of-the-box + - **calico** requires [configuring OpenStack Neutron ports](/docs/openstack.md) to allow service and pod subnets ``` # Choose network plugin (calico, weave or flannel) # Can also be set to 'cloud', which lets the cloud provider setup appropriate routing kube_network_plugin: flannel ``` -> flannel works out-of-the-box - -> calico requires allowing service's and pod's subnets on according OpenStack Neutron ports - Set variable **resolvconf_mode** ``` # Can be docker_dns, host_resolvconf or none @@ -336,18 +358,19 @@ kube_network_plugin: flannel resolvconf_mode: host_resolvconf ``` -For calico configure OpenStack Neutron ports: [OpenStack](/docs/openstack.md) - -## Deploy kubernetes: +### Deploy Kubernetes ``` -$ ansible-playbook --become -i contrib/terraform/openstack/hosts cluster.yml +$ ansible-playbook --become -i inventory/$CLUSTER/hosts cluster.yml ``` -## Set up local kubectl -1. Install kubectl on your workstation: -[Install and Set Up kubectl](https://kubernetes.io/docs/tasks/tools/install-kubectl/) -2. Add route to internal IP of master node (if needed): +This will take some time as there are many tasks to run. + +## Kubernetes + +### Set up kubectl +1. [Install kubectl](https://kubernetes.io/docs/tasks/tools/install-kubectl/) on your workstation +2. Add a route to the internal IP of a master node (if needed): ``` sudo route add [master-internal-ip] gw [router-ip] ``` @@ -355,28 +378,28 @@ or ``` sudo route add -net [internal-subnet]/24 gw [router-ip] ``` -3. List Kubernetes certs&keys: +3. List Kubernetes certificates & keys: ``` ssh [os-user]@[master-ip] sudo ls /etc/kubernetes/ssl/ ``` -4. Get admin's certs&key: +4. Get `admin`'s certificates and keys: ``` ssh [os-user]@[master-ip] sudo cat /etc/kubernetes/ssl/admin-[cluster_name]-k8s-master-1-key.pem > admin-key.pem ssh [os-user]@[master-ip] sudo cat /etc/kubernetes/ssl/admin-[cluster_name]-k8s-master-1.pem > admin.pem ssh [os-user]@[master-ip] sudo cat /etc/kubernetes/ssl/ca.pem > ca.pem ``` 5. Configure kubectl: -``` -kubectl config set-cluster default-cluster --server=https://[master-internal-ip]:6443 \ +```ShellSession +$ kubectl config set-cluster default-cluster --server=https://[master-internal-ip]:6443 \ --certificate-authority=ca.pem -kubectl config set-credentials default-admin \ +$ kubectl config set-credentials default-admin \ --certificate-authority=ca.pem \ --client-key=admin-key.pem \ --client-certificate=admin.pem -kubectl config set-context default-system --cluster=default-cluster --user=default-admin -kubectl config use-context default-system +$ kubectl config set-context default-system --cluster=default-cluster --user=default-admin +$ kubectl config use-context default-system ``` 7. Check it: ``` @@ -393,14 +416,15 @@ You can tell kubectl to ignore this condition by adding the ## GlusterFS GlusterFS is not deployed by the standard`cluster.yml` playbook, see the -[glusterfs playbook documentation](../../network-storage/glusterfs/README.md) +[GlusterFS playbook documentation](../../network-storage/glusterfs/README.md) for instructions. -Basically you will install gluster as -```bash -$ ansible-playbook --become -i contrib/terraform/openstack/hosts ./contrib/network-storage/glusterfs/glusterfs.yml +Basically you will install Gluster as +```ShellSession +$ ansible-playbook --become -i inventory/$CLUSTER/hosts ./contrib/network-storage/glusterfs/glusterfs.yml ``` -# What's next -[Start Hello Kubernetes Service](https://kubernetes.io/docs/tasks/access-application-cluster/service-access-application-cluster/) +## What's next + +Try out your new Kubernetes cluster with the [Hello Kubernetes service](https://kubernetes.io/docs/tasks/access-application-cluster/service-access-application-cluster/). diff --git a/contrib/terraform/openstack/group_vars b/contrib/terraform/openstack/group_vars deleted file mode 120000 index d64da8dc6..000000000 --- a/contrib/terraform/openstack/group_vars +++ /dev/null @@ -1 +0,0 @@ -../../../inventory/group_vars \ No newline at end of file diff --git a/contrib/terraform/openstack/inventory-sample/cluster.tf b/contrib/terraform/openstack/inventory-sample/cluster.tf new file mode 100644 index 000000000..7830d2159 --- /dev/null +++ b/contrib/terraform/openstack/inventory-sample/cluster.tf @@ -0,0 +1,45 @@ +# your Kubernetes cluster name here +cluster_name = "i-didnt-read-the-docs" + +# SSH key to use for access to nodes +public_key_path = "~/.ssh/id_rsa.pub" + +# image to use for bastion, masters, standalone etcd instances, and nodes +image = "" +# user on the node (ex. core on Container Linux, ubuntu on Ubuntu, etc.) +ssh_user = "" + +# 0|1 bastion nodes +number_of_bastions = 0 +#flavor_bastion = "" + +# standalone etcds +number_of_etcd = 0 + +# masters +number_of_k8s_masters = 1 +number_of_k8s_masters_no_etcd = 0 +number_of_k8s_masters_no_floating_ip = 0 +number_of_k8s_masters_no_floating_ip_no_etcd = 0 +flavor_k8s_master = "" + +# nodes +number_of_k8s_nodes = 2 +number_of_k8s_nodes_no_floating_ip = 4 +#flavor_k8s_node = "" + +# GlusterFS +# either 0 or more than one +#number_of_gfs_nodes_no_floating_ip = 0 +#gfs_volume_size_in_gb = 150 +# Container Linux does not support GlusterFS +#image_gfs = "" +# May be different from other nodes +#ssh_user_gfs = "ubuntu" +#flavor_gfs_node = "" + +# networking +network_name = "" +external_net = "" +floatingip_pool = "" + diff --git a/contrib/terraform/openstack/inventory-sample/group_vars b/contrib/terraform/openstack/inventory-sample/group_vars new file mode 120000 index 000000000..373595823 --- /dev/null +++ b/contrib/terraform/openstack/inventory-sample/group_vars @@ -0,0 +1 @@ +../../../../inventory/sample/group_vars \ No newline at end of file