* Add an option to deploy K8s app to test e2e network connectivity
and cluster DNS resolve via Kubedns for nethost/simple pods
(defaults to false).
* Parametrize existing k8s apps templates with kube_namespace and
kube_config_dir instead of hardcode.
* For CoreOS, ensure nameservers from inventory to be put in the
first place to allow hostnet pods connectivity via short names
or FQDN and hostnet agents to pass as well, if netchecker
deployed.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
* Add dns_replicas, dns_memory/cpu_limit/requests vars for
dns related apps.
* When kube_log_level=4, log dnsmasq queries as well.
* Add log level control for skydns (part of kubedns app).
* Add limits/requests vars for dnsmasq (part of kubedns app) and
dnsmasq daemon set.
* Drop string defaults for kube_log_level as it is int and
is defined in the global vars as well.
* Add docs
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When download_run_once with download_localhost is used, docker is
expected to be running on the delegate localhost. That may be not
the case for a non localhost delegate, which is the kube-master
otherwise. Then the dnsmasq role, had it been invoked early before
deployment starts, would fail because of the missing docker dependency.
* Fix that dependency on docker and do not pre download dnsmasq image
for the dnsmasq role, if download_localhost is disabled.
* Remove become: false for docker CLI invocation because that's not
the common pattern to allow users access docker CLI w/o sudo.
* Fix opt bin path hack for localhost delegate to ignore errors when
it fails with "sudo password required" otherwise.
* Describe download_run_once with download_localhost use case in docs
as well.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Use cloud-init config to replace /etc/resolv.conf with the
content for kubelet to properly configure hostnet pods.
Do not use systemd-resolved yet, see
https://coreos.com/os/docs/latest/configuring-dns.html
"Only nss-aware applications can take advantage of the
systemd-resolved cache. Notably, this means that statically
linked Go programs and programs running within Docker/rkt
will use /etc/resolv.conf only, and will not use the
systemd-resolve cache."
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
W/o this patch, the "Download containers" task may be skipped
when running on the delegate node due to wrong "when" confition.
Then it fails to upload nginx image to the nodes as well.
Fix download nginx dependency so it always can be pushed to
nodes when download_run_once is enabled.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When setting permission for containers download/upload dir we're
using `ansible_ssh_user`. But if playbook is executed without
user being explicitly set `ansible_ssh_user` may be undefined.
In such situations dir ownership will default to `ansible_user_id`
Closes: #644
According to http://kubernetes.io/docs/user-guide/images/ :
By default, the kubelet will try to pull each image from the
specified registry. However, if the imagePullPolicy property
of the container is set to IfNotPresent or Never, then a local\
image is used (preferentially or exclusively, respectively).
Use IfNotPresent value to allow images prepared by the download
role dependencies to be effectively used by kubelet without pull
errors resulting apps to stay blocked in PullBackOff/Error state
even when there are images on the localhost exist.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Pre download all required container images as roles' deps.
Drop unused flannel-server-helper images pre download.
Improve pods creation post-install test pre downloaded busybox.
Improve logs collection script with kubectl describe, fix sudo/etcd/weave
commands.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Fix unreliable waiting for the apiserver to become ready.
Remove logfile mount to align with the rest of static pods
and because containers shall write logs to stdout only.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
in the etcd handler, the reload etcd action
was called after ansible waits for etcd to be
up, this means that the health checks which are
called immediately after fail (resulting in the etcd
role always failing and never finishing)
This patch changes the order to move the 'wait for etcd
up' resource after the 'reload etcd resource', ensuring that
the service is up before the health check is called.
* Add download_localhost for the download_run_once mode, which is
use the ansible host (a travis node for CI case) to store and
distribute containers across cluster nodes in inventory.
Defaults to false.
* Rework download_run_once logic to fix idempotency of uploading
containers.
* For Travis CI, enable docker images caching and run Travis
workers with sudo enabled as a dependency
* For Travis CI, deploy with download_localhost and download_run_once
enabled to shourten dev path drastically.
* Add compression for saved container images. Defaults to 'best'.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Aleksandr Didenko <adidenko@mirantis.com>
Add one more step (task) to containers download/upload sequence -
copy saved .tar containers to ansible host (delegate_to: localhost).
Then upload images to target nodes. It uses synchronize module so
if ansible host (localhost) is the same host as kube-master[0] then
new task causes no issues and the copy to localhost process is
basically skipped.
- Move CNI configuration from `kubernetes/node` role to
`network_plugin/canal`
- Create SSL dir for Canal and symlink etcd SSL files
- Add needed options to `canal-config` configmap
- Run flannel and calico-node containers with proper configuration
Since version 'v1.0.0-beta' calicoctl is written
in Go and its API differs from old Python based
utility. Added support of both old and new version
of the utility.
- Drop debugs from collect-info playbook
- Drop sudo from collect-info step and add target dir var (required for travis jobs)
- Label all k8s apps, including static manifests
- Add logs for K8s apps to be collected as well
- Fix upload to GCS as a public-read tarball
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
'etcd_cert_dir' variable is missing from 'kubernetes-apps/ansible'
role which breaks Calico policy controller deployment.
Also fixing calico-policy-controller.yml.
Related bug: https://github.com/ansible/ansible/issues/15405
Uses tar and register because synchronize module cannot sudo on the
remote side correctly and copy is too slow.
This patch dramatically cuts down the number of tasks to process
for cert synchronization.
* Don't push containers if not changed
* Do preinstall role only once and redistribute defaults to
corresponding roles
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Change the kubelet --hostname-override flag to use the ansible_hostname variable which should be more consistent with the value required by cloud providers
Add ansible_hostname alias to /etc/hosts when it is different from inventory_hostname to overcome node name limitations see https://github.com/kubernetes/kubernetes/issues/22770
Signed-off-by: Chad Swenson <chadswen@gmail.com>
test to change the machine type
Revert "test to change the machine type"
This reverts commit 7a91f1b5405a39bee6cb91940b09a0b0f9d3aee1.
use google dns server when no upstream dns are defined
comment upstream_dns_servers
update documentation
remove deprecated kubelet flags
Revert "remove deprecated kubelet flags"
This reverts commit 21e3b893c896d0291c36a07d0414f4cb88b8d8ac.
The requirements for network policy feature are described here [1]. In
order to enable it, appropriate configuration must be provided to the CNI
plug in and Calico policy controller must be set up. Beside that
corresponding extensions needed to be enabled in k8s API.
Now to turn on the feature user can define `enable_network_policy`
customization variable for Ansible.
[1] http://kubernetes.io/docs/user-guide/networkpolicies/
Also adds all masters by hostname and localhost/127.0.0.1 to
apiserver SSL certificate.
Includes documentation update on how localhost loadbalancer works.
