* Download to delegate and sync files when download_run_once
* Fail on error after saving container image
* Do not set changed status when downloaded container was up to date
* Only sync containers when they are actually required
Previously, non-required images (pull_required=false as
image existed on target host) were synced to the target
hosts. This failed as the image was not downloaded to
the download_delegate and hence was not available for
syncing.
* Sync containers when only missing on some hosts
* Consider images with multiple repo tags
* Enable kubeadm images pull/syncing with download_delegate
* Use kubeadm images list to pull/sync
'kubeadm config images pull' is replaced by collecting the images
list with 'kubeadm config images list' and using the commonly
used method of pull/syncing the images.
* Ensure containers are downloaded and synced for all hosts
* Fix download/syncing when download_delegate is a kubernetes host
add the support of the folling property in azure-credential-check.yml
- azure_loadbalancer_sku: Sku of Load Balancer and Public IP. Candidate values are: basic and standard.
- azure_exclude_master_from_standard_lb: excludes master nodes from standard load balancer.
- azure_disable_outbound_snat: disables the outbound SNAT for public load balancer rules
- useInstanceMetadata: Use instance metadata service where possible
- azure_primary_availability_set: (Optional) The name of the availability set that should be used as the load balancer backend
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
This was already approved in #4106 but there are CI issues
with that PR due to references to kubernetes incubator.
After upgrading to Kubespray 2.8.1 with Kubeadm enabled Rook
Ceph volume provision failed due to the flexvolume plugin dir not
being correct. Adding the var fixed the issue
* Set cluster DNS correctly in case of nodelocal dns cache
* Pass in cluster_ip based on dns mode
* Disable nodelocaldns by default
* Fix syntax error
* Fix syntax issue
* Add nodelocadns ip to vars of node installation
* Change location of nodelocaldns_ip
* Try to remove newlines from jinja template
* Add debug for config file
* Move parameter logic outside of template
* Adapt templates after feedback
* Remove debugging
Addressing the discussion started in #4064, this PR moves kubeadm and
hyperkube binaries to /usr/local/bin before running them on the master
nodes.
It is to address the case where local_release_dir points to /tmp
(kubespray default) and /tmp is mounted with noexec mode, preventing
any binaries to be run in that partition.
In role "node", we still move kubeadm to bin_dir only on the worker
nodes.
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
* Remove non-kubeadm deployment
* More cleanup
* More cleanup
* More cleanup
* More cleanup
* Fix gitlab
* Try stop gce first before absent to make the delete process work
* More cleanup
* Fix bug with checking if kubeadm has already run
* Fix bug with checking if kubeadm has already run
* More fixes
* Fix test
* fix
* Fix gitlab checkout untill kubespray 2.8 is on quay
* Fixed
* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path
* Readd secret checking
* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0
* fix typo
* Fix CI jobs to kubeadm again. Fix broken hyperkube path
* Fix gitlab
* Fix rotate tokens
* More fixes
* More fixes
* Fix tokens
Introduced variable node_taints which can be set in inventory for
specific hosts or in group_vars, which generates --register-with-taints
command line argument for kubelet.
* Update defaults to match k8s 1.12 suggestions
* Test if Netchecker works with node ip instead of localhost
* Update defaults to ipvs and coredns
* Update defaults for kube_apiserver_insecure_port
* Update main.yaml
Now the `kubespray-aws-inventory.py` script always set a node_labels key
to ansible_host.
When AWS instance did not set property labels, it would be an empty
string.
The TASK `Write kubelet config file (kubeadm or non-kubeadm)` will
failed with a msg:
`AnsibleUndefinedVariable: 'unicode object' has no attribute 'items'`.
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
- Local Volume StorageClass configuration is now manged by `local_volume_provisioner_storage_classes`, a list of maps that specifies local storage classes with `name` `host_dir` and `mount_dir` keys per entry
- Tasks and templates updated to loop through local volume storage classes
- Previous defaults for path/class names were not changed
- Fixed an issue where a `kubernetes/preinstall` was creating directories inconsistently with the `kubernetes-apps/external_provisioner/local_volume_provisioner` task
* Fix the jinja expression for openstack_tenant_id
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
* Fix the dic iteration method in the kubelet template
Kubelet template rendering errors when additional Node lables are
added and using Python3. Update the method to be compatible to both
python2/3
Node lables doesn't work
* Changes to assign pod priority to kube components.
* Removed the boolean flag pod_priority_assignment
* Created new priorityclass k8s-cluster-critical
* Created new priorityclass k8s-cluster-critical
* Fixed the trailing spaces
* Fixed the trailing spaces
* Added kube version check while creating Priority Class k8s-cluster-critical
* Moved k8s-cluster-critical.yml
* Moved k8s-cluster-critical.yml to kube_config_dir
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
remove empty when line
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
force kubeadm upgrade due to failure without --force flag
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
added nodeSelector to have compatibility with hybrid cluster with win nodes, also fix for download with missing container type
fixes in syntax and LF for newline in files
fix on yamllint check
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
some cleanup for innecesary lines
remove conditions for nodeselector
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
Upgrade Kubernetes to V1.11.2
The kubeadm configuration file version has been upgraded from v1alpha1 to v1alpha2
Add bootstrap kubeadm-config.yaml with external etcd
ingress-nginx 0.16.2 (https://github.com/kubernetes/ingress-nginx/releases/tag/nginx-0.16.2)
This patch simplify ingress-nginx deployment by default deploy on
master, with customizable options; on the other hand, remove the
additional Ansible group "kube-ingress" and its k8s node label
injection.
Reference to https://kubernetes.io/docs/concepts/services-networking/ingress/#prerequisites:
GCE/Google Kubernetes Engine deploys an ingress controller on the master.
By changing `ingress_nginx_nodeselector` plus custom k8s node
label, user could customize the DaemonSet deployment target.
If `ingress_nginx_nodeselector` is empty, will deploy DaemonSet on
every k8s node.
Red Hat has this theory that binaries in sbin are too dangerous to be on
the default path, but we need them anyway.
RH7 has /sbin and /usr/sbin as symlinks, so that is no longer important.
I'm adding it to the `PATH` instead of making the path to `modinfo`
absolute because I am worried about breaking support for other
distributions.
