Commit graph

29 commits

Author SHA1 Message Date
Bart Sloeserwij
59f62473c9
Update configuration of registries in cri-o (#7852)
* Update configuration of registries in cri-o

* Update docs to match new registry configuration
2022-01-05 07:36:40 -08:00
Florian Ruynat
8d2b4ed4a9 Move min k8s version to 1.21 2022-01-04 10:25:00 -08:00
Cristian Calin
c1954ff918
Support deploying kubernetes 1.23 (#8323)
* Ensure entries for 1.23 are added for supported_versions vars

* cri-o: add support for kubernetes 1.23 but still use cri-o 1.22

* kubescheduler-config: diferentiate config versions based on kube_version
2021-12-21 01:38:46 -08:00
Nicolas MASSE
f01f7c54aa
Add support for CRI-O user namespaces (#8268)
* add support for cri-o user namespaces

* comply with yamllint rules
2021-12-20 06:37:25 -08:00
Florian Ruynat
b38382a68f
Move cri-o default package to 1.22 (#8258) 2021-12-02 06:21:34 -08:00
Florian Ruynat
5d1b34bdcd Move min k8s version to 1.20 2021-09-22 09:50:01 -07:00
Florian Ruynat
8efde799e1 Update kubernetes version to 1.22.2 2021-09-22 09:50:01 -07:00
kranthi guttikonda
81bf4f9304
cri-o registry auth support (#7837)
* cri-o registry auth support

* yaml lint for comments

* crio_registry_auth from registry_auth

* crio_registry_auth as defaults
2021-09-01 10:20:59 -07:00
Sébastien Huss
b0e4c375a7
Allow cri-o offline install (#7777) 2021-07-09 20:52:45 -07:00
Florian Ruynat
79fdee3979 Bump crio to default 1.21 2021-05-27 11:18:24 -07:00
Cristian Calin
4c06aa98b5
crio: add supported versions 1.20 and 1.21 and align default with k8s version (#7562)
* crio: add supported versions 1.20 and 1.21 and align default with k8s version

* cri-o: drop versions 1.17 and 1.18 from version matrix

* update note on cri-o version alignment
2021-04-28 11:30:51 -07:00
Cristian Calin
384d30b675
add support for configuring cri-o pids_limit (#7525) 2021-04-21 10:55:51 -07:00
Sergey
096bcdd078
Download once for crio (#6998)
* download run once feature for CRI-O

* fix typo

* fix test
2020-12-21 01:54:25 -08:00
Sergey
ed6cef85d8
add crio registry mirror support (#6977)
* add crio registry mirror support

* mdlint fix
2020-12-03 13:57:25 -08:00
Victor Morales
4f7a760a94
Add crun support (#6864)
Signed-off-by: Victor Morales <v.morales@samsung.com>
2020-12-01 11:00:50 -08:00
Bas van den Brink
17fb1ceed8
Allow airgapped CRI-O installation (#6927) 2020-11-28 08:38:47 -08:00
Victor Morales
e03e3c4582
Add Kata Containers support to CRI-O runtime (#6830)
* Enable Kata Containers for CRI-O runtime

Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.

Signed-off-by: Victor Morales <v.morales@samsung.com>

* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'

* Set manage_ns_lifecycle=true when KataContainers is enabed

* Add preinstall check for katacontainers

Signed-off-by: Victor Morales <v.morales@samsung.com>

Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
2020-10-23 03:07:46 -07:00
Hans Feldt
4781df587c
bump crio version to 1.19 (#6758)
* bump crio version to 1.19

* crio package name has changed for debian/ubuntu
* crio upgrade does not work, see #6757

* update crio info in docs
2020-10-13 02:08:26 -07:00
Hans Feldt
a2d4dbeee4
crio: use system default for storage driver by default (#6637)
After host reboot kubelet and crio goes into a loop and no container is started.

storage_driver in crio.conf overrides system defaults in etc/containers/storage.conf

/etc/containers/storage.conf is installed by package containers-common dependency
installed from cri-o (centos7) and contains "overlay".

Hosts already configured with overlay2 should be reconfigured and the
/var/lib/containers content removed.
2020-09-10 05:29:45 -07:00
Hans Feldt
9e2d282709
cri-o: add variable to configure unsecure pull (#6568)
By default do not allow "unqualified" (without a registry) images
because it is considered unsecure and subject to mitm attacks.

To enable insecure pull configure for example:

crio_registries:
  - "docker.io"
  - "quay.io"
2020-08-27 09:09:53 -07:00
Hans Feldt
c6e5be91e9
crio: align template crio.conf with upstream (#6432)
* log level by default increased to 'info'
* cgroup manager by default set to 'systemd'
* stream port (used by kubelet) bound to 127.0.0.1 for security reasons
* metrics can be enabled and port specified
2020-08-01 00:33:48 -07:00
spaced
1be15a0864
Enable crio 1.18 (#6197) 2020-05-28 00:42:15 -07:00
spaced
cf1566e8ed
Centos, debian and fedora CRI-O repo (#6008)
* replace removed repo with kubic repository for centos 7

* add crio configuration for centos8

* add crio configurations for debian

* use correct crio version for fedora

* simplify calulation of required crio version
- gives possibility to overwrite

* change default path for runc

* change default for seccomp path

* change default for conmon
2020-04-24 01:18:07 -07:00
spaced
b0484fe3e5
Ubuntu crio repo (#5994)
* declare kubic repo for ubuntu

* do not install crictl twice

* move fedora repo modular tasks to crio_repo file

* move centos repo tasks to crio_repo

* declare crio version matrix for ubuntu

* update documentation crio support for ubuntu
2020-04-22 13:29:45 -07:00
Maxime Guyot
09bccc97ba
Add CRI-O CI (#5460) 2020-04-22 06:09:52 -07:00
spaced
9c3b573f8e
Cleanup fedora coreos with crio container (#5887)
* fix upgrade of crio on fcos
- update documents

* install conntrack required by kube-proxy
- like commit 48c41bcbe7

* enable fedora modular repo for crio

* allow to override crio configuration
- set cgroup manager same to kubelet_cgroup_driver if defined
- path of seccomp_profile depends on distribution

* allow to override crio configuration
- fix path for ubuntu

* allow to override crio configuration
- fix cni path for fcos
2020-04-10 23:51:47 -07:00
Victor Morales
da089b5fca Update CRI-O in CentOS (#4582)
According to their compatibility matrix[1] the 1.11.5 version seems to
be deprecated. This change updates the CentOS repository reference.

[1] https://github.com/cri-o/cri-o#compatibility-matrix-cri-o---kubernetes-clusters
2019-08-22 01:16:32 -07:00
Dani Comnea
2a5721b4d4 Change CentOS CRI-O repo from developer repo to public one (#4807) 2019-05-27 05:33:51 -07:00
Antoine Legrand
c27a91f7f0 Split deploy steps in separate playbooks: part1 (#3451)
* Fix bootstrap_os/ubuntu idempotency

* Update bastion role

* move container_engine in sub-roles

* requires ansible 2.5

* ubuntu18 as first CI job
2018-10-09 19:14:33 -07:00
Renamed from roles/cri-o/defaults/main.yml (Browse further)