kubeadm is the default for a long time now,
and admin.conf is created by it, so let kubeadm handle it
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Using `kubeadm init phase kubeconfig all` breaks kubelet client certificate rotation
as we are missing `kubeadm init phase kubelet-finalize all` to point to `kubelet-client-current.pem`
kubeconfig format is stable so let's just use lineinfile,
this will avoid other future breakage
This revert to the logic before 6fe2248314
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
On CentOS 8 they seem to be ignored by default, but better be extra safe
This also make it easy to exclude other network plugin interfaces
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Since a790935d02 all proxy users
should be properly configured
Now when you have *_PROXY vars in your environment it can leads to failure
if NO_PROXY is not correct, or to persistent configuration changes
as seen with kubeadm in 1c5391dda7
Instead of playing constant whack-a-bug, inject empty *_PROXY vars everywhere
at the play level, and override at the task level when needed
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Move proxy_env to kubespray-defaults/defaults
There is no reasons to use set_facts here
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Ensure kubeadm doesn't use proxy
*_proxy variables might be present in the environment (/etc/environment, bash profile, ...)
When this is the case we end up with those proxy configuration in /etc/kubernetes/manifests/kube-*.yaml manifests
We cannot unset env variables, but kubeadm is nice enough to ignore empty vars
93d288e2a4/cmd/kubeadm/app/util/env.go (L27)
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Only checking the kubernetes api on the first master when upgrading is not enough.
Each master needs to be checked before it's upgrade.
Signed-off-by: Rick Haan <rickhaan94@gmail.com>
In some environments, it might not be possible to ping the IP address
of the nodes, e.g., because ICMP echo is blocked.
This commit allows kubespray to be configured to disable the ping
check, while performing all other checks.
This fixes the following warning:
[kubernetes/client : Generate admin kubeconfig with external api endpoint]
[WARNING]: Consider using the file module with state=directory rather than
running 'mkdir'. If you need to use command because file is insufficient
you can
RedHat 8.3 merged nf_conntrack_ipv4 in nf_conntrack but still advertise 4.18
so just try to modprobe and decide depending on the success
Also nf_conntrack is a dependency of ip_vs, so no need to care about it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* copying ssh key no longer required, works with password auth
* use copy module instead of synchronize (which requires sshpass)
* less tasks and always changed tasks
If crictl (and docker) binaries are deployed to the directories
that are not in standard PATH (e.g. /usr/local/bin), it is required
to specify full path to the binaries.
The task outputs the following warning:
TASK [kubernetes/preinstall : Enable ip forwarding]
[WARNING]: The value 1 (type int) in a string field was converted
to u'1' (type string). If this does not look like what you expect,
quote the entire value to ensure it does not change.
* fix flake8 errors in Kubespray CI - tox-inventory-builder
* Invalidate CRI-O kubic repo's cache
Signed-off-by: Victor Morales <v.morales@samsung.com>
* add support to configure pkg install retries
and use in CI job tf-ovh_ubuntu18-calico (due to it failing often)
* Switch Calico, Cilium and MetalLB image repos to Quay.io
Co-authored-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Barry Melbourne <9964974+bmelbourne@users.noreply.github.com>
* create a wrapper script with pki options
* supports all kubespray managed container engines
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* Allow the eventRecordQPS setting to be set.
The eventRecordQPS parameter controls rate limiting for event recording. When zero, unlimited events can cause denial-of-service situations. For my situation, I don't need more than a setting of "5". This change allows me to configure the setting before creating the cluster.
* Allow the eventRecordQPS setting to be set.
The default settings (see types.go) is five. So, this change does not affect the cluster provisioning. However, it does allow for the setting to be changed.
* Enable Kata Containers for CRI-O runtime
Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'
* Set manage_ns_lifecycle=true when KataContainers is enabed
* Add preinstall check for katacontainers
Signed-off-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
Command line flags aren't added to kube-proxy which results in missing
feature gates set in this component. Add appropriate setting to
ConfigMap instead.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
'ansible.vars.hostvars.HostVarsVars object' has no attribute 'kubeadm_upload_cert'
kubeadm_upload_cert will never be found as a hostvar for the first
master since the task is executed for a worker.
Fix by executing the upload task for the first master and register
the needed key. After that, workers can read hostvars for the master
Var kubeadm_etcd_refresh_cert_key removed since it no longer has
any use.
* Added option to force apiserver and respective client certificate to be regenerated without necessarily needing to bump the K8S cluster version
* Removed extra blank line
Handlers with the same name (Kubeadm | restart kubelet) leads to incorrect playbook execution. As a result, after completing the tasks, kubelet does not restart. This PR fix this behavior
After upgrading to newer Kubernetes(v1.17 at least), kubectl command
shows the following warning message:
WARNING: Kubernetes configuration file is group-readable.
This is insecure. Location: /home/foo/.kube/config
The kubeconfig was copied from {{ artifacts_dir }}/admin.conf with
kubeconfig_localhost feature. It is better to set valid file mode
at getting it on Kubespray.
When stopping at the check of "Stop if ip var does not match local ips"
the error message is like:
fatal: [single-k8s]: FAILED! => {
"assertion": "ip in ansible_all_ipv4_addresses",
"changed": false,
"evaluated_to": false,
"msg": "Assertion failed"
}
That doesn't contain actual IP addresses and it is difficult to understand
what was wrong. This adds the error message which contain actual IP addresses
to investigate the issue if happens.
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Fix reserved memory unit in kubelet configuration
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* Move systemReserved default values from template
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* remove podman cni plugin
* configure networkamanger global dns
* allow installation of python3-libselinux by disabling update repo temporary
* remove ipv4 section because it is not a valid configuration
Removes these startup warnings:
Warning: For remote container runtime, --pod-infra-container-image is ignored in kubelet, which should be set in that remote runtime instead
Using "/var/run/crio/crio.sock" as endpoint is deprecated, please consider using full url format "unix:///var/run/crio/crio.sock".
* Use proper openssl command to differentiate between host and ip in current certificate check
* fixup! Use proper openssl command to differentiate between host and ip in current certificate check
* Fix kubelet cgroup driver detection for crio
Remove fact standalone_kubelet since it is not used
* Fix yamllint complaints of roles/kubernetes/node/tasks/facts.yml
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* MINOR: Check kernel version before enable modprobe nf_conntrack
* CLEANUP: no more need to ignore error of this task
* MINOR: Fixing yaml and ansible lint error - remove trailling-space
If the special parameter "$@" is not quoted, the following command will not work:
./kubectl.sh patch storageclass my-storage-class -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'
* fix(kubelet): exec notify restart kubelet service when kube-config.yml changed
* Revert "refactor(kubelet handler): change task name("reload kubelet") this is misleading"
This reverts commit 8f5d29560802c7c997293adb1ce9f84d3b20b6cb.
* fix(handlers,kubelet): setting right notify task name
* etcd: etcd-events doesn't depend on etcd_cluster_setup
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: remove condition already present on include_tasks
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: fix scaling up
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use *access_addresses, do not delegate to etcd[0]
We want to wait for the full cluster to be healthy,
so use all the cluster addresses
Also we should be able to run the playbook when etcd[0] is down
(not tested), so do not delegate to etcd[0]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use failed_when for health check
unhealthy cluster is expected on first run, so use failed_when
instead of ignore_errors to remove scary red messages
Also use run_once
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/preinstall: ensure ansible_fqdn is up to date after changing /etc/hosts
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/master: regenerate apiserver cert if needed
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes-sigs-kubespray #5824
Added support nodes which are part of Virtual Machine Scale Sets(VMSS)
* kubernetes-sigs-kubespray #5824
* kubernetes-sigs-kubespray #5824
Added comments and updatetd azure docs.
* kubernetes-sigs-kubespray #5824
Added supported values comments for "azure_vmtype" in azure.yml
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
- This solves issue #5721 & #5713 (dupes)
- Provide a cleaner default usage pattern for the download role
around etcd that supports 'host' and 'docker' properly
- Extract the 'etcdctl' as a separate task install piece and reuse it where
appropriate
- Update the kubeadm-etcd task to reflect the above change
* fedora coreos support
- bootstrap and new fact for
* fedora coreos support
- fix bootstrap condition
* fedora coreos support
- allow customize packages for fedora coreos bootstrap
* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos
* fedora coreos support
- handle all ostree like os in same way
* fedora coreos support
- handle all ostree like os in same way for crio
* fedora coreos support
- add fcos documentations
refs #5277
As the issue describes, when no external or local load-balanced is used,
kube-proxy won't be able to contact apiserver at 127.0.0.1. So the
config map should be left as is.
