Commit graph

190 commits

Author SHA1 Message Date
Peter Slijkhuis
32884357ff Add kubelet_custom_flags to kubelet.kubeadm.env.j2 2018-01-09 14:04:36 +01:00
Jan Jungnickel
3fdb2ccf55 Revert back to using an empty var as default to exclude hostname (#2110) 2017-12-22 22:09:59 +00:00
Matthew Mosesohn
29f5b55d42
remove unwanted whitespace for kube_override_hostname (#2105) 2017-12-22 11:31:18 +00:00
Matthew Mosesohn
6bb46e3ecb
Fix param names in preparation for Kubernetes v1.9.0 (#2098)
This does not update v1.9.0, but fixes two incompatibilities
when trying to deploy v1.9.0.
2017-12-20 10:48:09 +00:00
unclejack
e5d353d0a7 contiv network support (#1914)
* Add Contiv support

Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.

* Update contiv version to 1.1.4

Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.

* Load openvswitch module to workaround on CentOS7.4

* Set contiv cni version to 0.1.0

Correct contiv CNI version to 0.1.0.

* Use kube_apiserver_endpoint for K8S_API_SERVER

Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.

* Make contiv use its own etcd

Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.

* Use cp instead of rsync to copy cni binaries

Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.

* Make contiv-etcd able to run on master nodes

* Add rbac_enabled flag for contiv pods

* Add contiv into CNI network plugin lists

* migrate contiv test to tests/files

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>

* Add required rules for contiv netplugin

* Better handling json return of fwdMode

* Make contiv etcd port configurable

* Use default var instead of templating

* roles/download/defaults/main.yml: use contiv 1.1.7

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
neith00
5f39efcdfd adding mount for kubelet to enable rbd mounts (#1957)
* adding mount for kubelet to enable rbd mounts

* fix conditionnal variable name
2017-11-13 14:04:13 +00:00
Haiwei Liu
ad0cd6939a Add support cAdvisor (#1908)
Signed-off-by: Haiwei Liu <carllhw@gmail.com>
2017-11-06 13:50:28 +00:00
Matthew Mosesohn
ab3832f3e7
Set host IP for kubelet always (#1924)
* Set host IP for kubelet always

Use ansible default IP if ip var is not set.

* Update main.yml
2017-11-03 10:19:37 +00:00
Spencer Smith
ec1170bd37 only mount volumes if local_volumes_enabled is true. fix mount flags in rkt. (#1923) 2017-11-03 07:10:37 +00:00
Spencer Smith
4771716ab2
Merge pull request #1907 from mattymo/disable_anon_auth
Block anonymous auth requests to kubelet
2017-11-02 12:01:39 -04:00
Spencer Smith
b156585739
Merge pull request #1917 from chadswen/docker-daemon-graph
Fix kubelet container with alternate Docker data paths
2017-11-02 11:58:55 -04:00
Matthew Mosesohn
3e3787de15 Fix local volume provisioner mount point for rkt 2017-11-02 09:45:26 +00:00
Chad Swenson
0c824d5ef1 Fix kubelet container with alternate Docker data paths
Some time ago I think the hardcoded `/var/lib/docker` was required, but kubelet running in a container has been aware of the Docker path since at least as far back as k8s 1.6.

Without this change, you see a large number of errors in the kubelet logs if you installed with a non-default `docker_daemon_graph`
2017-11-01 13:25:15 -05:00
Matthew Mosesohn
c0e989b17c
New addon: local_volume_provisioner (#1909) 2017-11-01 14:25:35 +00:00
Matthew Mosesohn
f7703dbca3 Block anonymous auth requests to kubelet 2017-10-30 19:06:54 +00:00
abelgana
d738acf638 Update kubelet.kubeadm.env.j2 (#1901) 2017-10-30 11:33:02 +00:00
tanshanshan
84d92aa3c7 fix-bug (#1900) 2017-10-30 11:23:24 +00:00
Hassan Zamani
c9fe8fde59 Use fail-swap-on flag only for kube_version >= 1.8 (#1829) 2017-10-18 16:32:38 +01:00
Seungkyu Ahn
b838468500 Fixed kubelet standard log environment (#1780)
Change KUBE_LOGGING to KUBE_LOGTOSTDERR, when installing kubelet
as host type.
2017-10-16 08:22:54 +01:00
Matthew Mosesohn
d487b2f927 Security best practice fixes (#1783)
* Disable basic and token auth by default

* Add recommended security params

* allow basic auth to fail in tests

* Enable TLS authentication for kubelet
2017-10-15 20:41:17 +01:00
Vijay Katam
27ed73e3e3 Rename dns_server, add var for selinux. (#1572)
* Rename dns_server to dnsmasq_dns_server so that it includes role prefix
as the var name is generic and conflicts when integrating with existing ansible automation.
*  Enable selinux state to be configurable with new var preinstall_selinux_state
2017-10-11 20:40:21 +01:00
Aivars Sterns
e41c0532e3 add possibility to disable fail with swap (#1773) 2017-10-11 19:49:31 +01:00
Matthew Mosesohn
eeb7274d65 Adjust memory reservation for master nodes (#1769) 2017-10-11 19:47:42 +01:00
Matthew Mosesohn
fe4ba51d1a Set node IP correctly (#1770)
Fixes #1741
2017-10-11 15:28:42 +01:00
Hyunsun Moon
adf575b75e Set default value for disable_shared_pid (#1710)
PID namespace sharing is disabled only in Kubernetes 1.7.
Explicitily enabling it by default could help reduce unexpected
results when upgrading to or downgrading from 1.7.
2017-10-11 14:55:51 +01:00
ArchiFleKs
7c663de6c9 add /etc/hosts volume to rkt templates 2017-10-09 16:41:51 +02:00
Jiri Stransky
70d0235770 Set correct kubelet cgroup-driver also for kubeadm deployments
This follows pull request #1677, adding the cgroup-driver
autodetection also for kubeadm way of deploying.

Info about this and the possibility to override is added to the docs.
2017-09-22 13:19:04 +02:00
Jiri Stransky
dbbe9419e5 Allow setting cgroup driver for kubelet
Red Hat family platforms run docker daemon with `--exec-opt
native.cgroupdriver=systemd`. When kubespray tried to start kubelet
service, it failed with:

Error: failed to run Kubelet: failed to create kubelet: misconfiguration: kubelet cgroup driver: "cgroupfs" is different from docker cgroup driver: "systemd"

Setting kubelet's cgroup driver to the correct value for the platform
fixes this issue. The code utilizes autodetection of docker's cgroup
driver, as different RPMs for the same distro may vary in that regard.
2017-09-21 11:58:11 +02:00
Matthew Mosesohn
8e731337ba Enable HA deploy of kubeadm (#1658)
* Enable HA deploy of kubeadm

* raise delay to 60s for starting gce hosts
2017-09-15 22:28:15 +01:00
Matthew Mosesohn
6744726089 kubeadm support (#1631)
* kubeadm support

* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job

* change ci boolean vars to json format

* fixup

* Update create-gce.yml

* Update create-gce.yml

* Update create-gce.yml
2017-09-13 19:00:51 +01:00
Matthew Mosesohn
77602dbb93 Move calico to daemonset (#1605)
* Drop legacy calico logic

* add calico as a daemonset
2017-09-04 11:29:51 +03:00
Brad Beam
8ae77e955e Adding in certificate serial numbers to manifests (#1392) 2017-09-01 09:02:23 +03:00
Oliver Moser
576beaa6a6 Include /opt/bin in PATH for host deployed kubelet on CoreOS (#1591)
* Include /opt/bin in PATH for host deployed kubelet on CoreOS

* Removing conditional check for CoreOS
2017-08-30 16:50:33 +03:00
Matthew Mosesohn
76b72338da Add CNI config for rkt kubelet (#1579) 2017-08-28 21:11:01 +03:00
Chad Swenson
a39e78d42d Initial version of Flannel using CNI (#1486)
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
2017-08-25 10:07:50 +03:00
Hassan Zamani
01ce09f343 Add feature_gates var for customizing Kubernetes feature gates (#1520) 2017-08-24 23:18:38 +03:00
Xavier Mehrenberger
3aabba7535 Remove discontinued option --reconcile-cidr if kube_network_plugin=="cloud" (#1568) 2017-08-24 17:01:30 +03:00
Ian Lewis
ecb6dc3679 Register standalone master w/ taints (#1426)
If Kubernetes > 1.6 register standalone master nodes w/ a
node-role.kubernetes.io/master=:NoSchedule taint to allow
for more flexible scheduling rather than just marking unschedulable.
2017-08-23 16:44:11 +03:00
Antoine Legrand
72ae7638bc Merge pull request #1446 from matlockx/master
add possibility to ignore the hostname override
2017-08-18 17:03:40 +02:00
Brad Beam
383d582b47 Merge pull request #1382 from jwfang/rbac
basic rbac support
2017-08-07 08:01:51 -05:00
nico
cc9f3ea938 Fix enforce-node-allocatable option
Closes #1228
pods is default enforcement

see https://kubernetes.io/docs/tasks/administer-cluster/reserve-compute-resources/
add

update
2017-07-31 10:06:53 +02:00
jwfang
092bf07cbf basic rbac support 2017-07-17 19:29:59 +08:00
Martin Joehren
12e918bd31 add possibility to ignore the hostname override 2017-07-13 14:04:39 +00:00
Brad Beam
e0bf8b2aab Adding recursive=true for rkt kubelet dir
Fixes #1434
2017-07-12 09:28:54 -05:00
Amit Kumar Jaiswal
319a0d65af Update kubelet.j2
Updated with closing endif.
2017-07-03 16:23:35 +05:30
Amit Kumar Jaiswal
3d2680a102 Update kubelet.j2
Updated!
2017-07-03 15:58:50 +05:30
Amit Kumar Jaiswal
c36fb5919a Update kubelet.j2
Updated!!
2017-07-03 15:55:04 +05:30
Amit Kumar Jaiswal
46d3f4369e Updated K8s version
Signed-off-by: Amit Kumar Jaiswal <amitkumarj441@gmail.com>
2017-07-03 04:06:42 +05:30
Brad Beam
696fd690ae Merge pull request #1092 from bradbeam/rkt_docker
Adding flag for docker container in kubelet w/ rkt
2017-06-06 12:58:40 -05:00
Matthew Mosesohn
9e64267867 Merge pull request #1293 from mattymo/kubelet_host_mode
Add host-based kubelet deployment
2017-05-19 18:07:39 +03:00