* Containerd: download containerd from upstream instead of using distro specific packages
split runc download to separate role
make bootstrap-os role deploy container-selinux and seccomp libraries
clean up package manager provided containerd
move variables to docker role that are no longer common with containerd
* Containerd: make molecule testing more relevant
* replace ubuntu18 with ubuntu20
* add centos8 and debian11 to molecule tests
* run kubernetes/preinstall role to ensure relevancy
of test including dependency packages
* CI: adjust test scenarios for downloaded containerd
* Add Rocky as a known OS
* Make sure Rocky includes bootstrap-centos.yml
* Update docs with Rocky Linux
* Rocky Linux wireguard and EPEL
* Rocky Linux in the list of supported distributions
to remove deprecation warning:
> Flag --feature-gates has been deprecated, This parameter should be set via the config file specified by the Kubelet's --config flag.
Kubespray deployment failed when using containerd backend on nodes that apparmor was not installed or previously removed. This PR ensure apparmor is installed by adding it into required_pkgs var.
Kubespray deployment failed when using containerd backend on nodes that apparmor was not installed or previously removed. This PR ensure apparmor is installed by adding it into required_pkgs var.
The path of kubeconfig should be configurable, and its default value
is /etc/kubernetes/admin.conf. Most paths of the file are configurable
but some were not. This make those configurable.
* Calico: make calico_min_version check relevant
* Calico: only check currently installed version against the oldest supported version by the previous release
On Debian 11, `ipset` just recommend `iptables` so on the system that apt is configured with `APT::Install-Recommends "0";` iptables will not install automatically.
* Fedora and RHEL use etc_t and the convention is <type_name>_t
* Docs: specify all values for preinstall_selinux_state
* CI: Add Fedora 34 with SELinux in enforcing mode
* Ansible: move to Ansible 3.4.0 which uses ansible-base 2.10.10
* Docs: add a note about ansible upgrade post 2.9.x
* CI: ensure ansible is removed before ansible 3.x is installed to avoid pip failures
* Ansible: use newer ansible-lint
* Fix ansible-lint 5.0.11 found issues
* syntax issues
* risky-file-permissions
* var-naming
* role-name
* molecule tests
* Mitogen: use 0.3.0rc1 which adds support for ansible 2.10+
* Pin ansible-base to 2.10.11 to get package fix on RHEL8
* Calico: align manifests with upstream
* allow enabling typha prometheus metrics
* Calico: enable eBPF support
* manage the kubernetes-services-endpoint configmap
* Calico: document the use of eBPF dataplane
* Calico: improve checks before deployment
* enforce disabling kube-proxy when using eBPF dataplane
* ensure calico_version is supported
follow new naming conventions for gcr's coredns image.
starting from 1.21 kubeadm assumes it to be `coredns/coredns`:
this causes the kubeadm deployment being unable to pull image, beacuse `v`
was also added in image tag, until the role `kubernetes-apps` ovverides
it with the old name, which is only compatible with <=1.7.
Backward comptability with kubeadm <=1.20 is mantained checking
kubernetes version and falling back to old names (`coredns:1.xx`) when
the version is less than 1.21
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
* AlmaLinux: ansible>2.9.19 is needed to know about AlmaLinux
* AlmaLinux: identify as a centos derrivative
* AlmaLinux: add AlmaLinux to checks for CentOS
* Use ansible_os_family to compare family and not distribution
* Add KubeSchedulerConfiguration for k8s 1.19 and up
With release of version 1.19.0 of kubernetes KubeSchedulerConfiguration
was graduated to beta. It allows to extend different stages of
scheduling with profiles. Such effect is achieved by using plugins and
extensions.
This patch adds KubeSchedulerConfiguration for versions 1.19 and later.
Configuration is set to k8s defaults or to kubespray vars. Moving those
defaults to new vars will be done in following patch.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* KubeSchedulerConfiguration: add defaults
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* Remove contrib/vault
This is marked as broken since 2018 / 3dcb914607
This still reference apiserver.pem, not used since ddffdb63bf
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Finish nuking vault from the codebase
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
This replaces kube-master with kube_control_plane because of [1]:
The Kubernetes project is moving away from wording that is
considered offensive. A new working group WG Naming was created
to track this work, and the word "master" was declared as offensive.
A proposal was formalized for replacing the word "master" with
"control plane". This means it should be removed from source code,
documentation, and user-facing configuration from Kubernetes and
its sub-projects.
NOTE: The reason why this changes it to kube_control_plane not
kube-control-plane is for valid group names on ansible.
[1]: https://github.com/kubernetes/enhancements/blob/master/keps/sig-cluster-lifecycle/kubeadm/2067-rename-master-label-taint/README.md#motivation
While at it remove force_certificate_regeneration
This boolean only forced the renewal of the apiserver certs
Either manually use k8s-certs-renew.sh or set auto_renew_certificates
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
The important action in kubeadm-version.yml is the templating of the configuration,
not finding / setting the version
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
kubeadm is the default for a long time now,
and admin.conf is created by it, so let kubeadm handle it
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Using `kubeadm init phase kubeconfig all` breaks kubelet client certificate rotation
as we are missing `kubeadm init phase kubelet-finalize all` to point to `kubelet-client-current.pem`
kubeconfig format is stable so let's just use lineinfile,
this will avoid other future breakage
This revert to the logic before 6fe2248314
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
On CentOS 8 they seem to be ignored by default, but better be extra safe
This also make it easy to exclude other network plugin interfaces
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Since a790935d02 all proxy users
should be properly configured
Now when you have *_PROXY vars in your environment it can leads to failure
if NO_PROXY is not correct, or to persistent configuration changes
as seen with kubeadm in 1c5391dda7
Instead of playing constant whack-a-bug, inject empty *_PROXY vars everywhere
at the play level, and override at the task level when needed
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Move proxy_env to kubespray-defaults/defaults
There is no reasons to use set_facts here
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Ensure kubeadm doesn't use proxy
*_proxy variables might be present in the environment (/etc/environment, bash profile, ...)
When this is the case we end up with those proxy configuration in /etc/kubernetes/manifests/kube-*.yaml manifests
We cannot unset env variables, but kubeadm is nice enough to ignore empty vars
93d288e2a4/cmd/kubeadm/app/util/env.go (L27)
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Only checking the kubernetes api on the first master when upgrading is not enough.
Each master needs to be checked before it's upgrade.
Signed-off-by: Rick Haan <rickhaan94@gmail.com>
In some environments, it might not be possible to ping the IP address
of the nodes, e.g., because ICMP echo is blocked.
This commit allows kubespray to be configured to disable the ping
check, while performing all other checks.
This fixes the following warning:
[kubernetes/client : Generate admin kubeconfig with external api endpoint]
[WARNING]: Consider using the file module with state=directory rather than
running 'mkdir'. If you need to use command because file is insufficient
you can
RedHat 8.3 merged nf_conntrack_ipv4 in nf_conntrack but still advertise 4.18
so just try to modprobe and decide depending on the success
Also nf_conntrack is a dependency of ip_vs, so no need to care about it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* copying ssh key no longer required, works with password auth
* use copy module instead of synchronize (which requires sshpass)
* less tasks and always changed tasks
If crictl (and docker) binaries are deployed to the directories
that are not in standard PATH (e.g. /usr/local/bin), it is required
to specify full path to the binaries.
The task outputs the following warning:
TASK [kubernetes/preinstall : Enable ip forwarding]
[WARNING]: The value 1 (type int) in a string field was converted
to u'1' (type string). If this does not look like what you expect,
quote the entire value to ensure it does not change.
* fix flake8 errors in Kubespray CI - tox-inventory-builder
* Invalidate CRI-O kubic repo's cache
Signed-off-by: Victor Morales <v.morales@samsung.com>
* add support to configure pkg install retries
and use in CI job tf-ovh_ubuntu18-calico (due to it failing often)
* Switch Calico, Cilium and MetalLB image repos to Quay.io
Co-authored-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Barry Melbourne <9964974+bmelbourne@users.noreply.github.com>
* create a wrapper script with pki options
* supports all kubespray managed container engines
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* Allow the eventRecordQPS setting to be set.
The eventRecordQPS parameter controls rate limiting for event recording. When zero, unlimited events can cause denial-of-service situations. For my situation, I don't need more than a setting of "5". This change allows me to configure the setting before creating the cluster.
* Allow the eventRecordQPS setting to be set.
The default settings (see types.go) is five. So, this change does not affect the cluster provisioning. However, it does allow for the setting to be changed.
* Enable Kata Containers for CRI-O runtime
Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'
* Set manage_ns_lifecycle=true when KataContainers is enabed
* Add preinstall check for katacontainers
Signed-off-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
Command line flags aren't added to kube-proxy which results in missing
feature gates set in this component. Add appropriate setting to
ConfigMap instead.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
'ansible.vars.hostvars.HostVarsVars object' has no attribute 'kubeadm_upload_cert'
kubeadm_upload_cert will never be found as a hostvar for the first
master since the task is executed for a worker.
Fix by executing the upload task for the first master and register
the needed key. After that, workers can read hostvars for the master
Var kubeadm_etcd_refresh_cert_key removed since it no longer has
any use.
* Added option to force apiserver and respective client certificate to be regenerated without necessarily needing to bump the K8S cluster version
* Removed extra blank line
Handlers with the same name (Kubeadm | restart kubelet) leads to incorrect playbook execution. As a result, after completing the tasks, kubelet does not restart. This PR fix this behavior
After upgrading to newer Kubernetes(v1.17 at least), kubectl command
shows the following warning message:
WARNING: Kubernetes configuration file is group-readable.
This is insecure. Location: /home/foo/.kube/config
The kubeconfig was copied from {{ artifacts_dir }}/admin.conf with
kubeconfig_localhost feature. It is better to set valid file mode
at getting it on Kubespray.
When stopping at the check of "Stop if ip var does not match local ips"
the error message is like:
fatal: [single-k8s]: FAILED! => {
"assertion": "ip in ansible_all_ipv4_addresses",
"changed": false,
"evaluated_to": false,
"msg": "Assertion failed"
}
That doesn't contain actual IP addresses and it is difficult to understand
what was wrong. This adds the error message which contain actual IP addresses
to investigate the issue if happens.
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Fix reserved memory unit in kubelet configuration
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* Move systemReserved default values from template
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* remove podman cni plugin
* configure networkamanger global dns
* allow installation of python3-libselinux by disabling update repo temporary
* remove ipv4 section because it is not a valid configuration
Removes these startup warnings:
Warning: For remote container runtime, --pod-infra-container-image is ignored in kubelet, which should be set in that remote runtime instead
Using "/var/run/crio/crio.sock" as endpoint is deprecated, please consider using full url format "unix:///var/run/crio/crio.sock".
