Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).
Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
* Drop linux capabilities for unprivileged containerized
worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
components' static manifests, etcd, calico-rr and k8s apps,
like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
networking containers though).
* Grant the kube and netplug users read access for etcd certs via
the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
for control plane.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Also remove the check for != "RedHat" when removing the dhclient hook,
as this had also to be done on other distros. Instead, check if the
dhclienthookfile is defined.
the tasks fail because selinux prevents ip-forwarding setting.
Moving the tasks around addresses two issues. Makes sure that
the correct python tools are in place before adjusting of selinux
and makes sure that ipforwarding is toggled after selinux adjustments.
Current design expects users to define at least one
nameserver in the nameservers var to backup host OS DNS config
when the K8s cluster DNS service IP is not available and hosts
still have to resolve external or intranet FQDNs.
Fix undefined nameservers to fallback to the default_resolver.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.
Also bump version of calico/ctl for some bug fixes.
Do not repeat options and nameservers in the dhclient hooks.
Do not prepend nameservers for dhclient but supersede and fail back
to the upstream_dns_resolvers then default_resolver. Fixes order of
nameservers placement, which is cluster DNS ip goes always first.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
* For Debian/RedHat OS families (with NetworkManager/dhclient/resolvconf
optionally enabled) prepend /etc/resolv.conf with required nameservers,
options, and supersede domain and search domains via the dhclient/resolvconf
hooks.
* Drop (z)nodnsupdate dhclient hook and re-implement it to complement the
resolvconf -u command, which is distro/cloud provider specific.
Update docs as well.
* Enable network restart to apply and persist changes and simplify handlers
to rely on network restart only. This fixes DNS resolve for hostnet K8s
pods for Red Hat OS family. Skip network restart for canal/calico plugins,
unless https://github.com/projectcalico/felix/issues/1185 fixed.
* Replace linefiles line plus with_items to block mode as it's faster.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
skip_dnsmasq_k8s var as not needed anymore.
* Preconfigure DNS stack early, which may be the case when downloading
artifacts from intranet repositories. Do not configure
K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
not existing).
* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
was set up and before K8s apps to be created.
* Move docker install task to early stage as well and unbind it from the
etcd role's specific install path. Fix external flannel dependency on
docker role handlers. Also fix the docker restart handlers' steps
ordering to match the expected sequence (the socket then the service).
* Add default resolver fact, which is
the cloud provider specific and remove hardcoded GCE resolver.
* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
domains combined with high ndots values lead to poor performance of
DNS stack and make ansible workers to fail very often with the
"Timeout (12s) waiting for privilege escalation prompt:" error.
* Update docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
The variale etcd_access_addresses is used to determine
how to address communication from other roles to
the etcd cluster.
It was set to the address that ansible uses to
connect to instance ({{ item }})s and not the
the variable:
ip_access
which had already been created and could already
be overridden through the access_ip variable.
This change allows ansible to connect to a machine using
a different address than the one used to access etcd.
Override GCE sysctl in /etc/sysctl.d/99-sysctl.conf instead of
the /etc/sysctl.d/11-gce-network-security.conf. It is recreated
by GCE, f.e. if gcloud CLI invokes some security related changes,
thus losing customizations we want to be persistent.
Update cloud providers firewall requirements in calico docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Change the kubelet --hostname-override flag to use the ansible_hostname variable which should be more consistent with the value required by cloud providers
Add ansible_hostname alias to /etc/hosts when it is different from inventory_hostname to overcome node name limitations see https://github.com/kubernetes/kubernetes/issues/22770
Signed-off-by: Chad Swenson <chadswen@gmail.com>
Also adds all masters by hostname and localhost/127.0.0.1 to
apiserver SSL certificate.
Includes documentation update on how localhost loadbalancer works.
* Add the retry_stagger var to tweak push and retry time strategies.
* Add large deployments related docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
etcd facts are generated in kubernetes/preinstall, so etcd nodes need
to be evaluated first before the rest of the deployment.
Moved several directory facts from kubernetes/node to
kubernetes/preinstall because they are not backward dependent.
* Add HA docs for API server.
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Use facts for kube_apiserver to not repeat code and enable LB endpoints use.
* Use /healthz check for the wait-for apiserver.
* Use the single endpoint for kubelet instead of the list of apiservers
* Specify kube_apiserver_count to for HA layout
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Add loadbalancer_apiserver_localhost (default false). If enabled, override
the external LB and expect localhost:443/8080 to be new internal only frontends.
* Add kube_apiserver_multiaccess to ignore loadbalancers, and make clients
to access the apiservers as a comma-separated list of access_ip/ip/ansible ip
(a default mode). When disabled, allow clients to use the given loadbalancers.
* Define connections security mode for kube controllers, schedulers, proxies.
It is insecure be default, which is the current deployment choice.
* Rework the groups['kube-master'][0] hardcode defining the apiserver
endpoints.
* Improve grouping of vars and add facts for kube_apiserver.
* Define kube_apiserver_insecure_bind_address as a fact, add more
facts for ease of use.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Move set_facts to the preinstall scope, so every role
may see it. For example, network plugins to see the etcd_endpoint.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Currently kubespray does not install kubernetes in a way that allows cinder volumes to be used. This commit provides the necessary cloud configuration file and configures kubelet and kube-apiserver to use it.
