In kubernetes 1.6 ClusterFirstWithHostNet was added as an option. In
accordance to it kubelet will generate resolv.conf based on own
resolv.conf. However, this doesn't create 'options', thus the proper
solution requires some investigation.
This patch sets the same resolv.conf for kubelet as host
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Run docker run from script rather than directly from systemd target
- Refactoring styling/templates
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
Non-brekable space is 0xc2 0xa0 byte sequence in UTF-8.
To find one:
$ git grep -I -P '\xc2\xa0'
To replace with regular space:
$ git grep -l -I -P '\xc2\xa0' | xargs sed -i 's/\xc2\xa0/ /g'
This commit doesn't include changes that will overlap with commit f1c59a91a1.
By default Calico CNI does not create any network access policies
or profiles if 'policy' is enabled in CNI config. And without any
policies/profiles network access to/from PODs is blocked.
K8s related policies are created by calico-policy-controller in
such case. So we need to start it as soon as possible, before any
real workloads.
This patch also fixes kube-api port in calico-policy-controller
yaml template.
Closes#1132
It is now possible to deactivate selected authentication methods
(basic auth, token auth) inside the cluster by adding
removing the required arguments to the Kube API Server and generating
the secrets accordingly.
The x509 authentification is currently not optional because disabling it
would affect the kubectl clients deployed on the master nodes.
Default backend is now etcd3 (was etcd2).
The migration process consists of the following steps:
* check if migration is necessary
* stop etcd on first etcd server
* run migration script
* start etcd on first etcd server
* stop kube-apiserver until configuration is updated
* update kube-apiserver
* purge old etcdv2 data
Issue #1125. Make RBAC authorization plugin work out of the box.
"When bootstrapping, superuser credentials should include the system:masters group, for example by creating a client cert with /O=system:masters. This gives those credentials full access to the API and allows an admin to then set up bindings for other users."
To use OpenID Connect Authentication beside deploying an OpenID Connect
Identity Provider it is necesarry to pass additional arguments to the Kube API Server.
These required arguments were added to the kube apiserver manifest.
Until now it was not possible to add an API Loadbalancer
without an static IP Address. But certain Loadbalancers
like AWS Elastic Loadbalanacer dontt have an fixed IP address.
With this commit it is possible to add these kind of Loadbalancers
to the Kargo deployment.
Updates based on feedback
Simplify checks for file exists
remove invalid char
Review feedback. Use regular systemd file.
Add template for docker systemd atomic
Kubernetes project is about to set etcdv3 as default storage engine in
1.6. This patch allows to specify particular backend for
kube-apiserver. User may force the option to etcdv3 for new environment.
At the same time if the environment uses v2 it will continue uses it
until user decides to upgrade to v3.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Sometimes, a sysadmin might outright delete the SELinux rpms and
delete the configuration. This causes the selinux module to fail
with
```
IOError: [Errno 2] No such file or directory: '/etc/selinux/config'\n",
"module_stdout": "", "msg": "MODULE FAILURE"}
```
This simply checks that /etc/selinux/config exists before we try
to set it Permissive.
Update from feedback
Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
Kubelet is responsible for creating symlinks from /var/lib/docker to /var/log
to make fluentd logging collector work.
However without using host's /var/log those links are invisible to fluentd.
This is done on rkt configuration too.
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).
Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.
Closes: #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
node-monitor-period, pod-eviction-timeout for Kubernetes controller
manager
- Add Kubernetes Relaibility Documentation with recomendations for
various scenarios.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
kubelet lost the ability to load kernel modules. This
puts that back by adding the lib/modules mount to kubelet.
The new variable kubelet_load_modules can be set to true
to enable this item. It is OFF by default.
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
- Docker 1.12 and further don't need nsenter hack. This patch removes
it. Also, it bumps the minimal version to 1.12.
Closes#776
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
* Drop linux capabilities for unprivileged containerized
worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
components' static manifests, etcd, calico-rr and k8s apps,
like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
networking containers though).
* Grant the kube and netplug users read access for etcd certs via
the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
for control plane.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
be run by limit on each node without regard for order.
The changes make sure that all of the directories needed to do
certificate management are on the master[0] or etcd[0] node regardless
of when the playbook gets run on each node. This allows for separate
ansible playbook runs in parallel that don't have to be synchronized.
the openssl tools will fail to create signing requests because
the CN is too long. This is mainly a problem when FQDNs are used
in the inventory file.
THis will truncate the hostname for the CN field only at the
first dot. This should handle the issue for most cases.
Also remove the check for != "RedHat" when removing the dhclient hook,
as this had also to be done on other distros. Instead, check if the
dhclienthookfile is defined.
the tasks fail because selinux prevents ip-forwarding setting.
Moving the tasks around addresses two issues. Makes sure that
the correct python tools are in place before adjusting of selinux
and makes sure that ipforwarding is toggled after selinux adjustments.
