Commit graph

549 commits

Author SHA1 Message Date
Matthew Mosesohn
5f12b7aedf Remove kubedns and dnsmasq. Move dns_late phase after apps (#4406)
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
2019-04-01 12:32:34 -07:00
Dmitry Chepurovskiy
669ab10c17 Added livenessProbe for local nginx apiserver proxy liveness probe (#4222)
* Added configurable local apiserver proxy liveness probe

* Enable API LB healthcheck by default

* Fix template spacing and moved healthz location to nginx http section

* Fix healthcheck listen address to allow kubelet request healthcheck
2019-03-28 06:20:46 -07:00
Matthew Mosesohn
acbf3db233 Remove hard dependence on facts for all nodes (#4304)
* Remove hard dependence on facts for all nodes

* Update main.yaml

* Update main.yaml
2019-03-05 03:04:39 -08:00
Ryler Hockenbury
88249308a0 Add labels to vsphere cloud config (#4275) 2019-02-25 19:58:15 -08:00
Matthew Mosesohn
b07641c3f3 Move kube_proxy_remove out of set_facts and set default (#4180) 2019-02-25 00:08:06 -08:00
Frank Ritchie
9805fb7a34 Add flexvolume plugin dir to kubeadm kubelet (#4168)
This was already approved in #4106 but there are CI issues
with that PR due to references to kubernetes incubator.

After upgrading to Kubespray 2.8.1 with Kubeadm enabled Rook
Ceph volume provision failed due to the flexvolume plugin dir not
being correct. Adding the var fixed the issue
2019-02-20 15:02:02 -08:00
Thomas Nys
68fd7e39da Set cluster DNS correctly in case of nodelocal dns cache (#3879)
* Set cluster DNS correctly in case of nodelocal dns cache

* Pass in cluster_ip based on dns mode

* Disable nodelocaldns by default

* Fix syntax error

* Fix syntax issue

* Add nodelocadns ip to vars of node installation

* Change location of nodelocaldns_ip

* Try to remove newlines from jinja template

* Add debug for config file

* Move parameter logic outside of template

* Adapt templates after feedback

* Remove debugging
2019-01-28 23:39:27 -08:00
Florent Monbillard
2054a98cf7 Run kubeadm and hyperkube outside of local_release_dir (#4098)
Addressing the discussion started in #4064, this PR moves kubeadm and
hyperkube binaries to /usr/local/bin before running them on the master
nodes.

It is to address the case where local_release_dir points to /tmp
(kubespray default) and /tmp is mounted with noexec mode, preventing
any binaries to be run in that partition.

In role "node", we still move kubeadm to bin_dir only on the worker
nodes.
2019-01-28 02:00:49 -08:00
Chad Swenson
80379f6cab Fix kube-proxy configuration for kubeadm (#3958)
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
  - Fixes vars that were orphaned by removing non-kubeadm
  - Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
  - Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task

We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
2019-01-03 00:04:26 -08:00
rongzhang
1bb1ba2274 Fix GPU node Scheduling 2018-12-25 21:37:10 +08:00
Ganesh Maharaj Mahalingam
73aee004ac Enable ClearLinux as a distro in kubespray (#3855)
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
2018-12-18 01:39:25 -08:00
ihard
30a9149b52 add vars for cilium init container (#3893)
* add vars for cilium init container

* make yamllint happy

* add var cilium_init in downloads
2018-12-18 00:34:19 -08:00
Egor
dc8a8011be Load nf_conntrack module if nf_conntrack_ipv4 failed (#3764) 2018-12-12 05:33:54 -08:00
Andreas Krüger
d5ce5874e8 Streamline path to certs dir (#3836)
* Streamline path to certs dir

* More fixes

* Set path to etcd certs in kubernetes defaults instead
2018-12-06 23:11:53 -08:00
Andreas Krüger
ddffdb63bf Remove non-kubeadm deployment (#3811)
* Remove non-kubeadm deployment

* More cleanup

* More cleanup

* More cleanup

* More cleanup

* Fix gitlab

* Try stop gce first before absent to make the delete process work

* More cleanup

* Fix bug with checking if kubeadm has already run

* Fix bug with checking if kubeadm has already run

* More fixes

* Fix test

* fix

* Fix gitlab checkout untill kubespray 2.8 is on quay

* Fixed

* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path

* Readd secret checking

* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0

* fix typo

* Fix CI jobs to kubeadm again. Fix broken hyperkube path

* Fix gitlab

* Fix rotate tokens

* More fixes

* More fixes

* Fix tokens
2018-12-06 02:33:38 -08:00
Michal Belica
8331f7b056 Add support for setting custom node taints (#3774)
Introduced variable node_taints which can be set in inventory for
specific hosts or in group_vars, which generates --register-with-taints
command line argument for kubelet.
2018-11-27 15:56:49 -08:00
Rong Zhang
ddc19f43ba Add cloud provider config to kubeadm deployments (#3766) 2018-11-27 05:03:03 -08:00
Aivars Sterns
b07e93e08b
Merge pull request #3754 from MiaoZhou/fix-aws-node-label-error
Fix AWS Node Labels Error
2018-11-27 09:09:54 +02:00
Andreas Krüger
bad886ca9b Update defaults to match k8s 1.12 suggestions (#3760)
* Update defaults to match k8s 1.12 suggestions

* Test if Netchecker works with node ip instead of localhost

* Update defaults to ipvs and coredns

* Update defaults for kube_apiserver_insecure_port

* Update main.yaml
2018-11-26 15:36:39 -08:00
Miao Zhou
885c6cff71 Fix AWS Node Labels Error
Now the `kubespray-aws-inventory.py` script always set a node_labels key
to ansible_host.

When AWS instance did not set property labels, it would be an empty
string.

The TASK `Write kubelet config file (kubeadm or non-kubeadm)` will
failed with a msg:

`AnsibleUndefinedVariable: 'unicode object' has no attribute 'items'`.
2018-11-23 17:37:41 +08:00
Danny Kulchinsky
9ae2eefb9a Add resource-container flag to kube-proxy manifest (#3519)
* Add resource-container flag to kube-proxy manifest

* add resourceContainer: "" to kubeadm kube-proxy configs
2018-11-19 00:39:29 -08:00
Arslanbekov Denis
d188876a91 Added feature-gates flags in kubelet.env (for kubeadm) (#3713) 2018-11-15 10:01:53 -08:00
Ryler Hockenbury
e8901a2422 Apply linux node selector to coreDNS deployment (#3688)
* Apply linux node selector to coreDNS deployment

* Remove comment before linux node selector on manifests

* mend
2018-11-13 04:54:15 -08:00
Bily Zhang
b2b421840c Fix some typos (#3690)
Signed-off-by: mooncake <xcoder@tenxcloud.com>
2018-11-10 15:53:58 +01:00
Maxim Makarov
8a17de327e Not necessary run on Nginx proxy all cpu cores (#3559) 2018-10-20 13:56:53 -07:00
Matthew Mosesohn
127969d65f Align node-role value for kubeadm compatibility (#3558)
kubeadm sets node label node-role.kubernetes.io/master=''
and this is not configurable. We should use it everywhere.
2018-10-20 07:12:54 -07:00
Erwan Miran
7bec169d58 Fix ansible syntax to avoid ansible deprecation warnings (#3512)
* failed

* version_compare

* succeeded

* skipped

* success

* version_compare becomes version since ansible 2.5

* ansible minimal version updated in doc and spec

* last version_compare
2018-10-16 15:33:30 -07:00
JuanJo Ciarlante
a5edd0d709 [jjo] add kube-router support (#3339)
* [jjo] add kube-router support

Fixes cloudnativelabs/kube-router#147.

* add kube-router as another network_plugin choice
* support most used kube-router flags via
  `kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
  `kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
  install, should also work for recent kubeadm releases via
  `skipKubeProxyInstall: true` config

* [jjo] address PR#3339 review from @woopstar

* add busybox image used by kube-router to downloads

* fix busybox download groups key

* rework kubeadm_enabled + kube_router_run_service_proxy

- verify it working ok w/the kubeadm_enabled and
  kube_router_run_service_proxy true or false

- introduce `kube_proxy_remove` fact, to decouple logic
  from kube_proxy_mode (which affects kubeadm configmap
  settings, thus no-good to ab-use it to 'none')

* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy

* address @woopstar latest review

* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml

* fix kube_router_run_service_proxy conditional for kube-proxy removal

* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes

* update kube-router tolerations for 1.12 compatibility

* add PriorityClass to kube-router DaemonSet
2018-10-16 07:15:05 -07:00
Loic Gouarin
36322901a6 fix kube-controller-manager config with openstack-cacert (#3435) 2018-10-12 06:39:58 -07:00
Johann Queuniet
1911fe5ca8 fix nginx proxy configuration conflicts (#3489)
* Allow configuration of nginx proxy config path

* Fix the internal nginx configuration location

Signed-off-by: Johann Queuniet <contact@lordran.net>
2018-10-11 06:33:18 -07:00
Chad Swenson
6602760a48 Support multiple local volume provisioner StorageClasses (#3450)
- Local Volume StorageClass configuration is now manged by `local_volume_provisioner_storage_classes`, a list of maps that specifies local storage classes with `name` `host_dir` and `mount_dir` keys per entry
- Tasks and templates updated to loop through local volume storage classes
- Previous defaults for path/class names were not changed
- Fixed an issue where a `kubernetes/preinstall` was creating directories inconsistently with the `kubernetes-apps/external_provisioner/local_volume_provisioner` task
2018-10-05 05:52:25 -07:00
Rong Zhang
af97febb04 Upgrade kubernetes to v1.12.0 (#3410)
* Upgrade kubernetes to v1.12.0

Use kubeadm v1alpha3 config

* Upgrade coredns and etcd

* Upgrage docker to 18.06
2018-10-04 02:05:55 -07:00
rboyapat
d9f495d391 Fix the dic iteration method in the kubelet template (#3415)
* Fix the jinja expression for openstack_tenant_id

OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.

* Fix the dic iteration method in the kubelet template

Kubelet template rendering errors when additional Node lables are
added and using Python3. Update the method to be compatible to both
python2/3

Node lables doesn't work
2018-09-30 05:10:12 -07:00
sangwook
0536125f75 Better fix for openstack cinder zone issue using ignore-volume-az option (#2980)
* Better fix for openstack cinder zone issue[1][2]
using ignore-volume-az option[3].
[1]: https://github.com/kubernetes-incubator/kubespray/pull/2155
[2]: https://github.com/kubernetes-incubator/kubespray/pull/2346
[3]: https://github.com/kubernetes/kubernetes/pull/53523

* Remove kube-scheduler-policy.yaml
2018-09-27 22:15:47 -07:00
Kuldip Madnani
36898a2c39 Adding pod priority for all the components. (#3361)
* Changes to assign pod priority to kube components.

* Removed the boolean flag pod_priority_assignment

* Created new priorityclass k8s-cluster-critical

* Created new priorityclass k8s-cluster-critical

* Fixed the trailing spaces

* Fixed the trailing spaces

* Added kube version check while creating Priority Class k8s-cluster-critical

* Moved k8s-cluster-critical.yml

* Moved k8s-cluster-critical.yml to kube_config_dir
2018-09-25 07:50:22 -07:00
k8s-ci-robot
51a5f54fc4
Merge pull request #3335 from AtzeDeVries/fix/ubuntu-xenial-resolv-conf
Fix/ubuntu xenial resolv conf
2018-09-20 23:16:11 -07:00
Rajitha Perera
e3d562bcdb Support for AWS cloud-config (#1465)
* Support for AWS cloud-config

* Update docs

* Fix version incompatibilities

* Do not use shorthand `default`

* Add new cloud config variable, roleArn
2018-09-20 16:31:28 +02:00
rongzhang
4d1055f5d5 Remove some useless files 2018-09-20 20:24:06 +08:00
Jan Wozniak
a330b281e8 Check openstack_cacert for empty string 2018-09-19 16:37:24 +02:00
k8s-ci-robot
a8a62afd74
Merge pull request #3304 from kubernetes-incubator/gpu2
Add support for GPU accelerator
2018-09-19 07:12:32 -07:00
Aivars Sterns
34019291b8
Merge pull request #3143 from jbcraig/add_os_trust_id
add support for openstack trust to cloud provider config
2018-09-19 16:07:03 +03:00
Antoine Legrand
08179018d4
Merge branch 'master' into gpu2 2018-09-19 15:02:51 +02:00
Andreas Kruger
e0ddabc463 Add support for kubelet_node_custom_flags 2018-09-19 12:58:06 +02:00
Andreas Kruger
940d2fdbb1 Add missing enforce-node-allocatable to kubelet for kubeadm deployments 2018-09-19 11:54:34 +02:00
AtzeDeVries
4cbd97667d Merge remote-tracking branch 'upstream/master' into fix/ubuntu-xenial-resolv-conf 2018-09-18 09:51:46 +02:00
rongzhang
77e08ba204 Support dynamic kubelet config
https://kubernetes.io/blog/2018/07/11/dynamic-kubelet-configuration/
2018-09-18 08:44:39 +08:00
AtzeDeVries
482857611a added extra var for ubuntu 18 netplan resolv 2018-09-17 09:01:55 +02:00
AtzeDeVries
8d8bbc294a fix for resolvconf in ubuntu18 2018-09-17 09:00:55 +02:00
rongzhang
84c4c7dc82 Use synchronize module 2018-09-16 20:36:44 +08:00
rongzhang
1d4aa7abcc Fix upgrade k8s 2018-09-16 10:35:12 +08:00
Rong Zhang
aa0da221e9
Merge pull request #2880 from hfinucane/rh7-paths
Fix #2261 by supporting Red Hat's limited PATH
2018-09-15 19:27:22 +08:00
k8s-ci-robot
ffbe9e7fd8
Merge pull request #1973 from guenhter/rsync-cmd-to-synchronize
Replace the raw rsync command with the synchronize module
2018-09-13 03:12:05 -07:00
AtzeDeVries
91b02c057e Add support for GPU accelerator 2018-09-13 11:53:11 +02:00
k8s-ci-robot
27905bbddf
Merge pull request #3250 from mattymo/openstack_cacert
Fix openstack cacert task
2018-09-06 06:15:59 -07:00
Matthew Mosesohn
b614a3504b Fix openstack cacert task 2018-09-06 14:06:06 +03:00
Matthew Mosesohn
991b3dbe54 put back endif in kubelet rkt template 2018-09-06 13:21:22 +03:00
Matthew Mosesohn
faedfb6307 remove broken endifs in kubelet rkt mode 2018-09-06 11:59:25 +03:00
Antoine Legrand
7e140e5f3c
Merge pull request #3122 from jbcraig/fix_cacert_feature
resolve issues with new cacert feature
2018-09-05 23:31:53 +02:00
k8s-ci-robot
c32145057d
Merge pull request #3178 from gitphill/patch-1
Add azure-container-registry-config for Azure
2018-09-03 05:06:01 -07:00
rboyapat
fbb98b0070 Fix the jinja expression for openstack_tenant_id (#3151)
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
2018-09-03 14:59:49 +03:00
k8s-ci-robot
db11394711
Merge pull request #3200 from pablodav/feature/k8s_win_v1.11
Required support to start working on windows node support
2018-09-03 04:51:23 -07:00
Pablo Estigarribia
7cbe3c2171 ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

remove empty when line

ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

force kubeadm upgrade due to failure without --force flag

ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

added nodeSelector to have compatibility with hybrid cluster with win nodes, also fix for download with missing container type

fixes in syntax and LF for newline in files

fix on yamllint check

ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version

some cleanup for innecesary lines

remove conditions for nodeselector
2018-09-02 12:47:06 -03:00
Phill Garrett
1babbcca85
Fix elif azure statement 2018-08-28 15:43:03 +01:00
Phill Garrett
f325d13082 Add azure-container-registry-config for Azure
Seperated out KUBELET_CLOUDPROVIDER env var assignment when cloud_provider equals azure
Appended azure-container-registry-config parameter
2018-08-28 10:23:25 +00:00
Takashi Okamoto
d407a590a6 container_manager variable to specify runtime. 2018-08-28 06:23:38 +00:00
Takashi Okamoto
5ab8a712d9 Add download_container flag to avoid docker pull when use cri-o. 2018-08-28 01:24:26 +00:00
Takashi Okamoto
cf7b9cfeef Support crio in kubelet service. 2018-08-28 01:24:26 +00:00
Takashi Okamoto
6090af29e7 Add cri-o role. 2018-08-28 01:24:26 +00:00
Takashi Okamoto
359009bb05 Download etcd and hyperkube binary. 2018-08-28 01:24:26 +00:00
guenhter
fff48d24ea Replace the raw rsync command with the synchronize module 2018-08-27 10:00:21 +02:00
k8s-ci-robot
f97515352b
Merge pull request #3161 from nutellinoit/kube_proxy_nodeport_addresses
--nodeport-addresses added on kube-proxy.manifest.j2 and on k8s-cluster.yml
2018-08-25 02:00:19 -07:00
Antoine Legrand
4882531c29
Merge pull request #3115 from oracle/oracle_oci_controller
Cloud provider support for OCI (Oracle Cloud Infrastructure)
2018-08-23 18:22:45 +02:00
Aivars Sterns
23fd3461bc calico upgrade to v3 (#3086)
* calico upgrade to v3

* update calico_rr version

* add missing file

* change contents of main.yml as it was left old version

* enable network policy by default

* remove unneeded task

* Fix kubelet calico settings

* fix when statement

* switch back to node-kubeconfig.yaml
2018-08-23 17:17:18 +03:00
Samuele Chiocca
5d9908c2c3 --nodeport-addresses added on kube-proxy.manifest.j2
Changed author
2018-08-22 15:32:07 +02:00
Jeff Bornemann
94df70be98 Cloud provider support for OCI (Oracle Cloud Infrastructure)
Signed-off-by: Jeff Bornemann <jeff.bornemann@oracle.com>
2018-08-21 17:36:42 -04:00
Jonathan Craig
5bf152886b add support for openstack trust to cloud provider config 2018-08-20 12:51:25 -04:00
Antoine Legrand
ac49bbb336
Merge pull request #2168 from xd007/docker_arm64
fix docker opts incompatible running on aarch64 Redhat/Centos
2018-08-17 16:24:07 +02:00
Jonathan Craig
4d783fff0d resolve issues with new cacert feature 2018-08-16 23:31:21 -04:00
Rong Zhang
a11e1eba9e Upgrade kubernetes to V1.11.x (#3078)
Upgrade Kubernetes to V1.11.2
The kubeadm configuration file version has been upgraded from v1alpha1 to v1alpha2
Add bootstrap kubeadm-config.yaml with external etcd
2018-08-14 15:13:44 +03:00
Rong Zhang
c288ffc55d
Merge pull request #2342 from southquist/add-ca-cert
allow for setting the cacert on openstack cloud provider
2018-08-07 17:46:01 +08:00
Evan Zeimet
6a4ce96b7d Variablize kube_proxy_healthz_bind_address
This fixes #3014
2018-07-19 14:19:09 -05:00
Wong Hoi Sing Edison
a0defefb3f ingress-nginx: Upgrade to 0.16.2
ingress-nginx 0.16.2 (https://github.com/kubernetes/ingress-nginx/releases/tag/nginx-0.16.2)

This patch simplify ingress-nginx deployment by default deploy on
master, with customizable options; on the other hand, remove the
additional Ansible group "kube-ingress" and its k8s node label
injection.

Reference to https://kubernetes.io/docs/concepts/services-networking/ingress/#prerequisites:

    GCE/Google Kubernetes Engine deploys an ingress controller on the master.

By changing `ingress_nginx_nodeselector` plus custom k8s node
label, user could customize the DaemonSet deployment target.

If `ingress_nginx_nodeselector` is empty, will deploy DaemonSet on
every k8s node.
2018-07-10 12:26:06 +08:00
Matthew Mosesohn
5c617c5a8b
Add tags to deploy components by --tags option (#2960)
* Add tags for cert serial tasks

This will help facilitate tag-based deployment of specific components.

* fixup kubernetes node
2018-07-06 09:12:13 +03:00
Matthew Mosesohn
c20196f9a0
Remove modprobe binary from kubelet rkt deployment (#2917) 2018-07-02 15:37:24 +03:00
southquist
c685dc493f allow for setting the cacert on openstack cloud provider 2018-06-28 16:00:13 +02:00
Henry Finucane
3ad9e9c5eb Fix #2261 by supporting Red Hat's limited PATH
Red Hat has this theory that binaries in sbin are too dangerous to be on
the default path, but we need them anyway.

RH7 has /sbin and /usr/sbin as symlinks, so that is no longer important.

I'm adding it to the `PATH` instead of making the path to `modinfo`
absolute because I am worried about breaking support for other
distributions.
2018-06-15 12:49:22 -07:00
Andreas Krüger
3a569c9dcb
Merge pull request #2750 from w-leads/feature/add-vmname-to-vcp-config
Add vm_name option to vsphere cloud provider config
2018-06-14 22:22:34 +02:00
Di Xu
f4d762bb95 fix docker opts incompatible running on aarch64 Redhat/Centos
On Aarch64, the default cgroup driver for docker is systemd
instead of cgroupfs. Should conform kubelet to use systemd
as cgroup driver as well to keep it consistent with docker.

Without this change, below exception will be raised.
/usr/bin/docker-current: Error response from daemon: shim
error: docker-runc not installed on system.

Change-Id: Id496ec9eaac6580e4da2f3ef1a386c9abc2a5129
2018-06-05 16:17:16 +08:00
Rong Zhang
d1e66f9cc8 Add label to kubelet env for kubeadm deploy cluster (#2841) 2018-06-04 11:26:47 +03:00
Christopher J. Ruwe
c1bc4615fe assert that number of pods on node does not exceed CIDR address range
The number of pods on a given node is determined by the  --max-pods=k
directive. When the address space is exhausted, no more pods can be
scheduled even if from the --max-pods-perspective, the node still has
capacity.

The special case that a pod is scheduled and uses the node IP in the
host network namespace is too "soft" to derive a guarantee.

Comparing kubelet_max_pods with kube_network_node_prefix when given
allows to assert that pod limits match the CIDR address space.
2018-05-16 11:55:46 +00:00
Matthew Mosesohn
7c93e71801
Upgrade k8s to 1.10.2 (#2748)
* Upgrade k8s to 1.10.2

Bumped etcd version to 3.2.16 as recommended

* Add ipvs fix for v1.10

* change flannel addons test to ha
2018-05-15 16:00:29 +03:00
Matthew Mosesohn
07cc981971
refactor vault role (#2733)
* Move front-proxy-client certs back to kube mount

We want the same CA for all k8s certs

* Refactor vault to use a third party module

The module adds idempotency and reduces some of the repetitive
logic in the vault role

Requires ansible-modules-hashivault on ansible node and hvac
on the vault hosts themselves

Add upgrade test scenario
Remove bootstrap-os tags from tasks

* fix upgrade issues

* improve unseal logic

* specify ca and fix etcd check

* Fix initialization check

bump machine size
2018-05-11 19:11:38 +03:00
Ryo Nishikawa
51a9379d3c Add vm_name option to vsphere cloud provider config 2018-05-08 12:23:58 -07:00
Maxime Gaillard
00db751646 Add Openstack tenant name 2018-05-01 09:21:37 +02:00
mirwan
06cdb260f6 labelvalue must be formatted to handle non string values (#2722) 2018-04-29 19:02:14 +03:00
mirwan
c3c5817af6 sysctl file should be in defaults so that it can be overriden (#2475)
* sysctl file should be in defaults so that it can be overriden

* Change sysctl_file_path to be consistent with roles/kubernetes/preinstall/defaults/main.yml
2018-04-27 18:50:58 +03:00
Matthew Mosesohn
1a14f1ecc1
Fix vol format for local volume provisioner in rkt (#2698) 2018-04-24 20:32:08 +03:00
Matthew Mosesohn
f73717ea35
Mount local volume provisioner dirs for containerized kubelet (#2648) 2018-04-12 22:55:13 +03:00
Robin Skahjem-Eriksen
0f35e17e23 Fix new envvar for setting openstack_tenant_id (#2641)
Changed from OS_PROJECT_ID to OS_PROJECT_NAME.
2018-04-10 17:23:31 +03:00
Brad Beam
77b3f9bb97 Removing default for volume-plugins mountpoint (#2618)
All checks test if this is defined meaning there is no way to undefine it.
2018-04-10 17:19:25 +03:00
Matthew Mosesohn
45f15bf753
Revert "Fix new envvar for setting openstack_tenant_id" (#2640) 2018-04-10 14:37:24 +03:00
Aivars Sterns
913cc5a9af
Merge pull request #2639 from ironhouzi/openstack_tenant_id_fix
Fix new envvar for setting openstack_tenant_id
2018-04-10 14:35:28 +03:00
Robin Skahjem-Eriksen
0c0f6b755d Fix new envvar for setting openstack_tenant_id
Changed from OS_PROJECT_ID to OS_PROJECT_NAME.
2018-04-10 13:30:48 +02:00
Matthew Mosesohn
f954bc0a5a Remove jinja2 dependency of do
While `do` looks cleaner, forcing this extra option in ansible.cfg
seems to be more invasive. It would be better to keep the traditional
approach of `set dummy = ` instead.
2018-04-09 12:27:53 +03:00
Chen Hong
973e7372b4 content: | 2018-04-04 23:05:27 +08:00
Chen Hong
b54e091886 Persist ip_vs modules 2018-04-04 18:18:51 +08:00
Andreas Krüger
ba24fe3226
Merge pull request #2570 from avoidik/transfer-cloud-configs
Move cloud config configurations to proper location
2018-04-02 10:31:38 +02:00
Wong Hoi Sing Edison
5fe144aa0f ingress-nginx: container download related things should defined in the download role 2018-04-01 00:22:33 +08:00
avoidik
aa301c31d1 Move credential checks into proper folder 2018-03-31 13:29:00 +03:00
avoidik
15efdf0c16 Move credential checks 2018-03-31 03:26:37 +03:00
avoidik
ab8760cc83 Move credentials pre-check 2018-03-31 03:24:57 +03:00
avoidik
b6da596ec1 Move default configuration parameters for cloud-config 2018-03-31 03:18:23 +03:00
avoidik
3c12c6beb3 Move cloud config configurations to proper location 2018-03-31 02:59:59 +03:00
Erwan Miran
8ece922ef0 node_labels documentation + kube-ingress label handling as role_node_label 2018-03-31 00:36:11 +02:00
Matthew Mosesohn
03bcfa7ff5
Stop templating kube-system namespace and creating it (#2545)
Kubernetes makes this namespace automatically, so there is
no need for kubespray to manage it.
2018-03-30 14:29:13 +03:00
RongZhang
5711074c5a
Merge pull request #2290 from mirwan/node_labels_from_inventory
Node labels definition in kubelet params from inventory
2018-03-30 03:42:52 -05:00
陈宏
4d85e3765e remove redundancy code 2018-03-30 09:19:00 +08:00
Matthew Mosesohn
72a4223884 Write cloud-config during kubelet configuration
This file should only be updated during kubelet upgrade so that
master components are not accidentally restarted first during
preinstall stage.
2018-03-28 16:26:36 +03:00
Andreas Krüger
03117d9572
Merge pull request #2488 from LuckySB/ingress-nginx-node-role
Dedicated node for ingress nginx controller
2018-03-28 14:07:40 +02:00
avoidik
e375678674 Set exact user for Kubelet services 2018-03-27 11:13:52 +03:00
Erwan Miran
8b71ef8ceb Labels from role (node-role.k8s.io/node) and labels from inventory are merged into node-labels parameter in kubelet 2018-03-21 09:19:05 +01:00
Sergey Bondarev
1481f7d64b Dedicated node for ingress nginx controller
The ability to create dedicated node for ingress nginx controller
host type network for nginx controller

and add from example https://github.com/kubernetes/ingress-nginx/blob/master/docs/examples/static-ip/nginx-ingress-controller.yaml
terminationGracePeriodSeconds: 60
2018-03-17 02:54:46 +03:00
Chad Swenson
7d33650019
Merge pull request #2462 from woopstar/coredns-patch
Add CoreDNS support
2018-03-16 18:33:36 -05:00
woopstar
e40368ae2b Add CoreDNS support with various fixes
Added CoreDNS to downloads

Updated with labels. Should now work without RBAC too

Fix DNS settings on hosts

Rename CoreDNS service from kube-dns to coredns

Add rotate based on http://edgeofsanity.net/rant/2017/12/20/systemd-resolved-is-broken.html

Updated docs with CoreDNS info

Added labels and fixed minor settings from official yaml file: https://github.com/kubernetes/kubernetes/blob/release-1.9/cluster/addons/dns/coredns.yaml.sed

Added a secondary deployment and secondary service ip. This is to mitigate dns timeouts and create high resitency for failures. See discussion at 'https://github.com/coreos/coreos-kubernetes/issues/641#issuecomment-281174806'

Set dns list correct. Thanks to @whereismyjetpack

Only download KubeDNS or CoreDNS if selected

Move dns cleanup to its own file and import tasks based on dns mode

Fix install of KubeDNS when dnsmask_kubedns mode is selected

Add new dns option coredns_dual for dual stack deployment. Added variable to configure replicas deployed. Updated docs for dual stack deployment. Removed rotate option in resolv.conf.

Run DNS manifests for CoreDNS and KubeDNS

Set skydns servers on dual stack deployment

Use only one template for CoreDNS dual deployment

Set correct cluster ip for the dns server
2018-03-16 21:51:37 +01:00
zhengchuan hu
d1e6632e6a Fix err in kubelet.kubeadm.env.j2
1. 404 link url
2. kubelet_authentication_token_webhook is not work
3. kube_reserved variable set twice
2018-03-14 17:25:21 +08:00
Dann Bohn
50e3ccfa2b uses new kube_memory_reserved/kube_cpu_reserved variables in kubelt 2018-03-12 12:46:14 -04:00
Wong Hoi Sing Edison
6402004018 FIXUP #2424: local_provisioner directory should be created only if enabled 2018-03-08 11:57:46 +08:00
zhengchuan hu
646d473e8e fix the name of some variable 2018-03-07 18:30:34 +08:00
Jonas Kongslund
a800ed094b Added support for webhook authentication/authorization on the secure kubelet endpoint 2018-03-03 10:00:09 +04:00
Aivars Sterns
8b21034b31
Merge pull request #2344 from hswong3i/local_volume_provisioner_fixup
Upgrade Local Volume Provisioner Addon to v2.0.0
2018-03-01 13:12:44 +02:00
Andreas Krüger
42a0f46268 Add health check to kube proxy (#2356)
Adding health checking to kube proxy. Fixes #2308
2018-02-21 23:14:45 +03:00
Wong Hoi Sing Edison
deef47c923 Upgrade Local Volume Provisioner Addon to v2.0.0 2018-02-21 13:41:25 +08:00
Chad Swenson
2de6da25a8
Merge pull request #2312 from woopstar/patch-7
Added iptables lock fix and ajusted oom-score
2018-02-19 22:47:07 -06:00
melkosoft
f13e76d022 Added cilium support (#2236)
* Added cilium support

* Fix typo in debian test config

* Remove empty lines

* Changed cilium version from <latest> to <v1.0.0-rc3>

* Add missing changes for cilium

* Add cilium to CI pipeline

* Fix wrong file name

* Check kernel version for cilium

* fixed ci error

* fixed cilium-ds.j2 template

* added waiting for cilium pods to run

* Fixed missing EOF

* Fixed trailing spaces

* Fixed trailing spaces

* Fixed trailing spaces

* Fixed too many blank lines

* Updated tolerations,annotations in cilium DS template

* Set cilium_version to iptables-1.9 to see if bug is fixed in CI

* Update cilium image tag to v1.0.0-rc4

* Update Cilium test case CI vars filenames

* Add optional prometheus flag, adjust initial readiness delay

* Update README.md with cilium info
2018-02-16 21:37:47 -06:00
Andreas Krüger
41ca67bf54
Added iptables lock fix and ajusted oom-score
xtables lock was missing. Added new option for oom-score to make sure it's not killed in an OOM situation before regular pods.
2018-02-12 10:21:38 +01:00
Aivars Sterns
c70c44b07b
Merge pull request #2257 from rzenker/tb/baremetal-tweaks
baremetal tweaks
2018-02-08 15:48:55 +00:00
Aivars Sterns
20583e3d15
Merge pull request #2067 from manics/sysctl-net-brfilter
Always set net.bridge.bridge-nf-call-* sysctl
2018-02-08 15:43:46 +00:00
Brad Beam
384e5dd4c4
Merge pull request #2160 from kongslund/disable-read-only-port
Make the Kubelet read-only port configurable and disable it by default
2018-02-07 13:06:32 -06:00
Ryan Zenker
ad9049a49e baremetal tweaks
* allow installs to not have hostname overriden with fqdn from inventory
* calico-config no longer requires local as and will default to global
* when cloudprovider is not defined, use the inventory_hostname for cni-calico
* allow reset to not restart network (buggy nodes die with this cmd)
* default kube_override_hostname to inventory_hostname instead of ansible_hostname
2018-02-06 13:52:22 -05:00
Erwan Miran
8006a6cd82 local_volumes_enabled replaced by local_volume_provisioner_enabled 2018-02-06 17:12:09 +01:00
Chad Swenson
bd1f0bcfd7
Merge pull request #2201 from riverzhang/ipvs
Support ipvs mode for kube-proxy
2018-02-01 22:29:52 -06:00
rong.zhang
b10c308a5a Support ipvs mode for kube-proxy
Support ipvs mode for kube-proxy
2018-01-30 13:09:01 +08:00
Chad Swenson
f4fe9e3421
Merge pull request #2171 from ArchiFleKs/kubeproxy-lvs
Add lib/modules to kube-proxy to enable LVS
2018-01-29 22:58:02 -06:00
Matthew Mosesohn
dc6a17e092
Use include/import tasks (#2192)
import_tasks will consume far less memory, so it should be
used whenever it is compatible.
2018-01-29 14:37:48 +03:00
Matthew Mosesohn
bf1411060e Add optional manual dns_mode (#2178) 2018-01-23 14:28:42 +01:00
Stanislav Makar
ae47b617e3 Fix 'no such host' problem (#2148)
Fix 'no such host' problem reported by commands *kubectl logs* and *kubectl exec*
when cloud_provider is OpenStack

Closes: #2147
2018-01-22 16:08:24 +03:00
Spencer Smith
f19c8e8c1d
Merge pull request #2132 from PhilippeChepy/flex-volumes
Add support for flex volumes plugins.
2018-01-17 15:00:45 -05:00
ArchiFleKs
637604d08f Add lib/modules to kube-proxy to enable LVS
kube-proxy is complaining of missing modules at startup. There is a plan
to also support an LVS implementation of kube-proxy in additon to
userspace and iptables
2018-01-17 16:35:53 +01:00
Jonas Kongslund
11844c987c Make the Kubelet read-only port configurable and disable it by default. Fixes #2159. 2018-01-16 11:11:41 +04:00
Spencer Smith
ccd9cc3dce
Merge pull request #2146 from abelgana/master
Manage deprecated kubelet option
2018-01-09 17:19:42 -05:00