* Kata-Containers: add 2.2.0 hashes and make default
* Kata-Containers: replace 2.1.0 with bugfix version 2.1.1
* Kata-Containers: move to q35 a more modern VM architecture as 'pc' is removed in 2.2.0
* CSI: update CSI snapshot CRDs
* CSI: update snapshot controller tag version with kubernetes specific versions
* CSI: allow enabling csi_snapshot_controller independent of Cinder CSI
* CSI: Align csi-snapshot-controller with upstream and use a Deployment instead of a StatefulSet
To download necessary files in advance for offline deployment,
we can see all file URLs with contrib/offline/generate_list.sh
Most URLs are downloadable, but gvisor's one is not because the
URL is a part of full URLs for gvisor.
To download gvisor's files from the URLs directory, this separates
into two URLs for runsc and the shim.
* Ansible: move to Ansible 3.4.0 which uses ansible-base 2.10.10
* Docs: add a note about ansible upgrade post 2.9.x
* CI: ensure ansible is removed before ansible 3.x is installed to avoid pip failures
* Ansible: use newer ansible-lint
* Fix ansible-lint 5.0.11 found issues
* syntax issues
* risky-file-permissions
* var-naming
* role-name
* molecule tests
* Mitogen: use 0.3.0rc1 which adds support for ansible 2.10+
* Pin ansible-base to 2.10.11 to get package fix on RHEL8
* Calico: align manifests with upstream
* allow enabling typha prometheus metrics
* Calico: enable eBPF support
* manage the kubernetes-services-endpoint configmap
* Calico: document the use of eBPF dataplane
* Calico: improve checks before deployment
* enforce disabling kube-proxy when using eBPF dataplane
* ensure calico_version is supported
* Kata: add Kata 2.x checksums and adjust download urls for 2.x
* Kata: drop 1.x version which is no longer supported
* Kata: set default version 2.1.0
* Calico: add v3.19.1 hashes
* enable liveness probe for calico-kube-controllers
3.19.1
* Calico: drop support for v3.16.x
* Calico: promote v3.18.3 as default
follow new naming conventions for gcr's coredns image.
starting from 1.21 kubeadm assumes it to be `coredns/coredns`:
this causes the kubeadm deployment being unable to pull image, beacuse `v`
was also added in image tag, until the role `kubernetes-apps` ovverides
it with the old name, which is only compatible with <=1.7.
Backward comptability with kubeadm <=1.20 is mantained checking
kubernetes version and falling back to old names (`coredns:1.xx`) when
the version is less than 1.21
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
* calico: drop support for version 3.15
* drop check for calico version >= 3.3, we are at 3.16 minimum now
* we moved to calico 3.16+ so we can default to /opt/cni/bin/install
This replaces kube-master with kube_control_plane because of [1]:
The Kubernetes project is moving away from wording that is
considered offensive. A new working group WG Naming was created
to track this work, and the word "master" was declared as offensive.
A proposal was formalized for replacing the word "master" with
"control plane". This means it should be removed from source code,
documentation, and user-facing configuration from Kubernetes and
its sub-projects.
NOTE: The reason why this changes it to kube_control_plane not
kube-control-plane is for valid group names on ansible.
[1]: https://github.com/kubernetes/enhancements/blob/master/keps/sig-cluster-lifecycle/kubeadm/2067-rename-master-label-taint/README.md#motivation
* Add crun download_url and checksum
* Change versioning format to crun native versioning
* Download crun using download_file.yml
* Get crun version from download defaults
* Delegate crun binary copy task to crun role
* Download Calico KDD CRDs
* Replace kustomize with lineinfile and use ansible assemble module
* Replace find+lineinfile by sed in shell module to avoid nested loop
* add condition on sed
* use block for kdd tasks + remove supernumerary kdd manifest apply in start "Start Calico resources"
Since a790935d02 all proxy users
should be properly configured
Now when you have *_PROXY vars in your environment it can leads to failure
if NO_PROXY is not correct, or to persistent configuration changes
as seen with kubeadm in 1c5391dda7
Instead of playing constant whack-a-bug, inject empty *_PROXY vars everywhere
at the play level, and override at the task level when needed
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Move proxy_env to kubespray-defaults/defaults
There is no reasons to use set_facts here
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Ensure kubeadm doesn't use proxy
*_proxy variables might be present in the environment (/etc/environment, bash profile, ...)
When this is the case we end up with those proxy configuration in /etc/kubernetes/manifests/kube-*.yaml manifests
We cannot unset env variables, but kubeadm is nice enough to ignore empty vars
93d288e2a4/cmd/kubeadm/app/util/env.go (L27)
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Helm v3.5.2 is a security (patch) release. Users are strongly
recommended to update to this release. It fixes two security issues in
upstream dependencies and one security issue in the Helm codebase.
See https://github.com/helm/helm/releases/tag/v3.5.2
TASK [Generate a list of information about the images on a node]
registers list of container images to docker_images.
Then the next TASK [Set pull_required if the desired image is not
yet loaded] does based on expecting images are registered.
However sometimes the first TASK was failed as [1] but the failure
is ignored due to failed_when:false and it makes another issue.
This removes this unnecessary failed_when to detect the failure
at the point.
In addition, this removes no_log:true also because the output doesn't
contain any sensitive data and now it just makes debugging difficult.
[1]: https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/-/jobs/934714534#L2953
no_proxy is a pain to get right, and having proxy variables present causes issues
(k8s components get proxy configuration after upgrade, see #7100)
It's better to only configure what require proxy:
- the runtime (containerd/docker/crio)
- the package manager + apt_key
- the download tasks
Tested with the following clusters
- 4 CentOS 8 nodes
- 1 Ubuntu 20.04 node
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Update hashes and set default version to 1.19.5
Signed-off-by: anthr76 <hello@anthonyrabbito.com>
* Reorder hashes
1.19.5 hashes should be near 1.19.x
* Added back blank line
* copying ssh key no longer required, works with password auth
* use copy module instead of synchronize (which requires sshpass)
* less tasks and always changed tasks
This new version uses the same base image as kube-proxy
(k8s.gcr.io/build-image/debian-iptables)
This allow to automatically pick iptables-legacy or iptables-nft,
and be compatible with RHEL/CentOS 8
https://github.com/kubernetes/dns/pull/367
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* fix flake8 errors in Kubespray CI - tox-inventory-builder
* Invalidate CRI-O kubic repo's cache
Signed-off-by: Victor Morales <v.morales@samsung.com>
* add support to configure pkg install retries
and use in CI job tf-ovh_ubuntu18-calico (due to it failing often)
* Switch Calico, Cilium and MetalLB image repos to Quay.io
Co-authored-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Barry Melbourne <9964974+bmelbourne@users.noreply.github.com>
The 0d0cc8cf9c change creates several
DaemonSets to cover the Flannel CNI installation for different CPU
architectures. This change removes the unnecessary architecture value
from the docker tag value.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Make metallb image repos configurable
* Moved metallb image repo definitions to download role defaults
* Removed comment. These are set in download defaults
* add snapshot-controller and v1beta1 snapshot api
* fix typo
* udpate manifest to v1beta1
* update
* update manifests
* fix spelling
* wait until crd is applied
* fix missing info in kube module
* revert snapshotclass
* add snapshot crds before applying the csi driver
* add crds, missed them in last commit
* use pull policy from kubespray
Support for Ambassador OSS as an Ingress Controller when
settings `ingress_ambassador_enabled: true`.
Signed-off-by: Alvaro Saurin <alvaro.saurin@gmail.com>
with the Python ruamel.yml library
- Change True/False to true/false in a few places so file can
be more easily round-tripped with the Python ruamel.yml library
* bump to dashboard 2.0 rc6 with metrics scrapper
* fix missing yaml seperator making Replicaset complaining about missing ServiceAccount
* unwanted legay gross hack forgot to remove before
* no need namespace on CrBinding
* bump to 2.0.0 release
* remove dashboard_metrics_scrapper_enabled
* added required permissions for querying endpointslice resources
* copy-pasted role permissions from cilium install manifests
* bumped cilium version to v1.7.2
- This solves issue #5721 & #5713 (dupes)
- Provide a cleaner default usage pattern for the download role
around etcd that supports 'host' and 'docker' properly
- Extract the 'etcdctl' as a separate task install piece and reuse it where
appropriate
- Update the kubeadm-etcd task to reflect the above change
* Upgrade etcd to 3.3.18
* Try with etcd 3.3.15 (kubeadm 1.16.7 default)
* Back to square one
* Try with 3.3.11
* Upgrade etcd to 3.3.18 (take 2)
* Try with 3.3.12
* download file
* download containers
* fix push image to nodes
* pull if none image on host
* fix
* improve docker image tag checks.
do not pull already cached images
* rebase fix merge conflict
* add support download_run_once when upgrade and scale cluster
add some test with download_run_once
* set default values to temp flag for every download cycle
* add save,load abilty for containerd and crio when download_run_once=true
* return redefine image save/load command to set_docker_image_facts.yml
* move set command to set_container_facts
* ctr in containerd_bin_dir
* fix order of ctr image export arguments
* temporary disable download_run_once for containerd and crio
due https://github.com/containerd/containerd/issues/4075
* remove unused files
* fix strict yaml linter warning and errors
* refactor logical conditions to pull and cache container images
* remove comment due lint check
* document role
* remove image_load_on_localhost, because cached images are always loaded to docker on remote sites
* remove XXX from debug output
