* Enable AutoScaler for CoreDNS
* Only use one template for dns autoscaler
* Rename a few variables for replicas and minimum pods
* Rename a few variables for replicas and minimum pods
* Remove replicas to make autoscale work
* Cleanup kubedns-autoscaler as it has been renamed
add prometheus annotations to calico-node if
calico_felix_prometheusmetricsenabled is enabled.
This will allow a kubernetes_sd to automaticly find the pods and start
scraping.
* Fix Failure talking to yum: Cannot find a valid baseurl for repo: base/7/x86_64 if Install packages in CentOS using proxy
* Add proxy to /etc/yum.conf if http_proxy is defined
* Added changes to clean up orphan containers and reload docker & kubelet directories.
* Added new files for cleaning up orphans and docker & kubelet directories
* Added new lines at the end of these files
* removed the trailing whitespaces from main.yml and clean-up.yml
* Updated as per the review comments
* Updated as per the review comments
* Removed service_facts and package_facts because they are not supported in ansible 2.4.0
* Corrected yaml syntax errors
* Removed the use of json_query filter and utilized selectattr
* Removed trailing spaces
* Changed the default value of docker_clean_up to false
* Added Changes to only include cleanup-docker-orphans.sh
* Reverted back changes done inside handler.
* Removed trailing spaces and made default value of docker_orphan_clean_up as true
* Reverted the default value of docker_orphan_clean_up as false
* Made the docker clean up as drop in
* Made the docker clean up as drop in
* Reverted the value of boolean docker_orphan_clean_up to false
* Converted ExecStop to ExecSTartPost. Removed the live restore check from the orphan script
* Adds support for Multus (multiple interfaces) CNI plugin
Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.
* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
When using resolvconf_mode host_resolvconf, there is an early DNS
config stage where Kubernetes cluster DNS is not injected for host
DNS intially. Later, the cluster DNS is enabled, but we do not
need to run every task from the kubernetes/preinstall role.
kube-router v0.2.1 highlights from changelog:
- IPv6 WIP but pretty close to full working functionality
- fully support network policy semantics with addition of support for
ipblock and except
* warning on meta flush_handlers
* avoid rm
* avoid "Module remote_tmp /root/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir with the correct permissions manually" warning on subsequent tasks using blockinfile
* is match
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
The hosts(5) manpage clearly states that the first entry is the
"canonical name", or FQDN (Fully-Qualified Domain Name):
IP_address canonical_hostname [aliases...]
By using the alias as a first entry, `hostname -f` does not return the
correct domain which breaks all sorts of unrelated functionality (it
has impact over email server configuration, for example).
* [jjo] add DIND support to contrib/
- add contrib/dind with ansible playbook to
create "node" containers, and setup them to mimic
host nodes as much as possible (using Ubuntu images),
see contrib/dind/README.md
- nodes' /etc/hosts editing via `blockinfile` and
`lineinfile` need `unsafe_writes: yes` because /etc/hosts
are mounted by docker, and thus can't be handled atomically
(modify copy + rename)
* dind-host role: set node container hostname on creation
* add "Resulting deployment" section with some CLI outputs
* typo
* selectable node_distro: debian, ubuntu
* some fixes for node_distro: ubuntu
* cpu optimization: add early `pkill -STOP agetty`
* typo
* add centos dind support ;)
* add kubespray-dind.yaml, support fedora
- add kubespray-dind.yaml (former custom.yaml at README.md)
- rework README.md as per above
- use some YAML power to share distros' commonality
- add fedora support
* create unique /etc/machine-id and other updates
- create unique /etc/machine-id in each docker node,
used as seed for e.g. weave mac addresses
- with above, now netchecker 100% passes WoHooOO!
🎉🎉🎉
- updated README.md output from (1.12.1, verified
netcheck)
* minor typos
* fix centos node creation, needs earlier udevadm removal to avoid flaky facts, also verified netcheck Ok \o/
* add Q&D test-distros.sh, back to manual /etc/machine-id hack
* run-test-distros.sh cosmetics and minor fixes
* run-test-distros.sh: $rc fix and minor formatting changes
* run-test-distros.sh output cosmetics
* Added Priority class to tiller installation and also fixed tiller override implementation.
* Added changes to handle priority classes separately in tiller, instead of using the variable tiller_override
* Added changes to clean up orphan containers and reload docker & kubelet directories.
* Added new files for cleaning up orphans and docker & kubelet directories
* Added new lines at the end of these files
* removed the trailing whitespaces from main.yml and clean-up.yml
* Updated as per the review comments
* Updated as per the review comments
* Removed service_facts and package_facts because they are not supported in ansible 2.4.0
* Corrected yaml syntax errors
* Removed the use of json_query filter and utilized selectattr
* Removed trailing spaces
* Changed the default value of docker_clean_up to false
* Added Changes to only include cleanup-docker-orphans.sh
* Reverted back changes done inside handler.
* Removed trailing spaces and made default value of docker_orphan_clean_up as true
* Reverted the default value of docker_orphan_clean_up as false
* Made the docker clean up as drop in
* Made the docker clean up as drop in
* Reverted the value of boolean docker_orphan_clean_up to false
* #3475 - make dnsmasq to send queries to all servers in upstream. Make dnsmasq config file customizable.
* Code style fixes. Return current behaviour for dnsmasq strict-order flag.
* Fix DNS loop when resolvconf_mode is set to host_resolvconf
* Make sure upstream_dns_servers is defined when using resolvconf_mode == 'host_resolvconf'
* Only set upstream dns servers on KubeDNS and CoreDNS if they are defined
* Only set upstream dns servers on KubeDNS and CoreDNS if they are defined
- Local Volume StorageClass configuration is now manged by `local_volume_provisioner_storage_classes`, a list of maps that specifies local storage classes with `name` `host_dir` and `mount_dir` keys per entry
- Tasks and templates updated to loop through local volume storage classes
- Previous defaults for path/class names were not changed
- Fixed an issue where a `kubernetes/preinstall` was creating directories inconsistently with the `kubernetes-apps/external_provisioner/local_volume_provisioner` task
* Fix the jinja expression for openstack_tenant_id
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
* Fix the dic iteration method in the kubelet template
Kubelet template rendering errors when additional Node lables are
added and using Python3. Update the method to be compatible to both
python2/3
Node lables doesn't work
According to the documentation, container images are described
by vars like `foo_image_repo` and `foo_image_tag`.
The variables netcheck_{agent,server}_{img_repo,tag} do not
follow that convention.
Before, Nodes tainted with NoExecute policy did not have calico/weave Pod.
Network pod should run on all nodes whatever happens on a specific node.
Also always set the Pods to be critical.
Also remove deprecated scheduler.alpha.kubernetes.io/tolerations annotations.
* Changes to assign pod priority to kube components.
* Removed the boolean flag pod_priority_assignment
* Created new priorityclass k8s-cluster-critical
* Created new priorityclass k8s-cluster-critical
* Fixed the trailing spaces
* Fixed the trailing spaces
* Added kube version check while creating Priority Class k8s-cluster-critical
* Moved k8s-cluster-critical.yml
* Moved k8s-cluster-critical.yml to kube_config_dir
