C12s/c12s-kubespray

Author	SHA1	Message	Date
woopstar	f193b12059	Kubeadm auto creates this	2018-02-07 10:50:34 +01:00
woopstar	2cd254954c	Remove defaults of allowed names. Updated kubeadm	2018-02-07 10:07:55 +01:00
woopstar	4dab92ce69	Rename from aggregator-proxy-client to front-proxy-client to match kubeadm design. Added kubeadm support too. Changed to use variables set and not hardcode paths. Still missing cert generation for Vault	2018-02-07 09:50:19 +01:00
Erwan Miran	ca08614641	yamllint fix	2018-02-07 09:12:28 +01:00
rong.zhang	47adf4bce6	Disalbe install epel-release rpm on Centos/Redhat 1.Disalbe install epel-release rpm on Centos/Redhat 2.Use yum install epel-release	2018-02-07 14:58:50 +08:00
Brad Beam	7928cd20fb	Merge pull request #2037 from tiewei/contiv-etcd-split Split contiv etcd and etcd-proxy into two daemonsets	2018-02-06 15:37:16 -06:00
Ryan Zenker	ad9049a49e	baremetal tweaks * allow installs to not have hostname overriden with fqdn from inventory * calico-config no longer requires local as and will default to global * when cloudprovider is not defined, use the inventory_hostname for cni-calico * allow reset to not restart network (buggy nodes die with this cmd) * default kube_override_hostname to inventory_hostname instead of ansible_hostname	2018-02-06 13:52:22 -05:00
Erwan Miran	b4e264251f	JSON/YAML syntax fix	2018-02-06 17:17:10 +01:00
Erwan Miran	8006a6cd82	local_volumes_enabled replaced by local_volume_provisioner_enabled	2018-02-06 17:12:09 +01:00
Andreas Krüger	5cd6b0c753	Adding missing defaults for weave The PR #2203 add's missing defaults for weave, but no signed CLA. So this PR fixes it.	2018-02-06 14:25:07 +01:00
Andreas Krüger	bb339265fc	Set default registry_enabled to false In PR #2244 the `registry_enabled` is missing in defaults, causing a deployment to fail, if it is not set in k8s-cluster.yml	2018-02-06 14:17:06 +01:00
Antoine Legrand	bb4446e94c	Merge pull request #2226 from manics/supplemental-addresses Enable additional addresses to be added to certificates	2018-02-06 13:51:54 +01:00
Antoine Legrand	d2102671cd	Merge pull request #2214 from woopstar/patch-3 Loadbalancer Apiserver Address is missing	2018-02-06 13:47:55 +01:00
Antoine Legrand	138e0c2301	Merge pull request #2250 from woopstar/weave-mtu-patch Added option to set MTU on Weave	2018-02-06 12:13:54 +01:00
Antoine Legrand	37cfd289d8	Merge pull request #2248 from hswong3i/dashboard.yml.j2 Dashboard template should not suffix with .yml.j2	2018-02-06 11:25:02 +01:00
Antoine Legrand	9f3081580a	Merge pull request #2249 from hswong3i/kubedns-deploy.yml.j2 KubeDNS template should not suffix with .yml.j2	2018-02-06 11:24:19 +01:00
Antoine Legrand	a3248379db	Merge branch 'master' into local_volume_provisioner	2018-02-06 09:28:27 +01:00
Antoine Legrand	0774c8385c	Merge pull request #2244 from hswong3i/registry Migrate Kubernetes v1.9.1 cluster/addons/registry to Kubespray	2018-02-06 09:20:48 +01:00
woopstar	b2d30d68e7	Rename CN for aggreator back. Add flags to apiserver when version is >= 1.9	2018-02-05 20:37:14 +01:00
woopstar	82d10b882c	Added fixes from whereismyjetpack	2018-02-05 20:07:12 +01:00
Maxim Krasilnikov	95b8ac5f62	Added optional controller and scheduler extra args to kubeadm config (#2205 )	2018-02-05 16:49:13 +03:00
woopstar	0b4168cad4	WIP. Adding metrics-server support for K8s version 1.9	2018-02-05 10:37:41 +01:00
woopstar	3289472e31	Added option to set MTU on Weave	2018-02-05 10:23:48 +01:00
Wong Hoi Sing Edison	4ad53339f6	KubeDNS template should not suffix with .yml.j2	2018-02-05 16:26:54 +08:00
Wong Hoi Sing Edison	a4d3da6a8e	Dashboard template should not suffix with .yml.j2	2018-02-05 16:18:21 +08:00
Wong Hoi Sing Edison	7954ea2525	Migrate Kubernetes v1.9.1 cluster/addons/registry to Kubespray	2018-02-05 12:21:09 +08:00
Chad Swenson	bd1f0bcfd7	Merge pull request #2201 from riverzhang/ipvs Support ipvs mode for kube-proxy	2018-02-01 22:29:52 -06:00
Wong Hoi Sing Edison	bc2e26d7ef	update apiVersion	2018-02-01 14:16:32 +08:00
Wong Hoi Sing Edison	fd80013917	lint and cleanup local_volume_provisioner	2018-02-01 14:14:18 +08:00
Chad Swenson	f7d52564aa	Merge pull request #2084 from riverzhang/devicemapper Fix can not use devicemapper driver	2018-01-31 20:52:22 -06:00
Spencer Smith	f7e8d1149a	Merge pull request #2229 from whereismyjetpack/etcd-quorum-read --etcd-quorum-read is depricated in kube >= 1.9	2018-01-31 17:10:10 -05:00
Spencer Smith	bd091caaf9	Merge pull request #2200 from riverzhang/hyperkube Upgrade to Kubernetes v1.9.2	2018-01-31 16:08:22 -05:00
Spencer Smith	b455a1bf76	Merge pull request #2212 from mattymo/missing_defaults Add missing group var default values to kubespray-defaults	2018-01-31 16:07:53 -05:00
Spencer Smith	c0a3bcf9b3	Merge pull request #2221 from Xuxe/patch-vcp-v1.9.2 Updated vSphere cloud provider config for Kubernetes >= v1.9.2 and added resource pool deployment variable	2018-01-31 16:06:07 -05:00
Dann Bohn	dc6c703741	--etcd-quorum-read is depricated in kube >= 1.9	2018-01-31 15:49:52 -05:00
Matthew Mosesohn	16629d0b8e	Vault should use cert auth for etcd	2018-01-31 20:37:14 +03:00
Julian Hübenthal	7f79210ed1	reworked vsphere-cloud-config template	2018-01-31 16:51:23 +01:00
Simon Li	27a1a697e7	supplementary_addresses_in_ssl_keys can be a hostname	2018-01-31 15:16:08 +00:00
Aivars Sterns	c1267004ef	Merge pull request #2130 from ArchiFleKs/simplify_os_provider Simplify and update OpenStack cloud provider	2018-01-31 12:02:02 +02:00
Julian Hübenthal	9cdd2214f9	render vsphere_resource_pool only if defined	2018-01-31 09:56:43 +01:00
Julian Hübenthal	989e9174c2	Added vSphere cloud provider config update for Kubernetes >= 1.9.2	2018-01-31 09:15:46 +01:00
rong.zhang	3993e12335	Fix can not be used devicemapper driver Fix can not be used devicemapper driver	2018-01-31 15:51:11 +08:00
Brad Beam	ac4d782937	Merge pull request #2074 from fangzhen/fix-domains-split Make spliting system_search_domains more robust	2018-01-30 21:01:19 -06:00
rong.zhang	32d18ca992	remove trailing space	2018-01-31 09:50:41 +08:00
Matthew Mosesohn	2df4b6c5d2	Rename default_resolver to cloud_resolver (#2209 ) Cloud resolvers are mandatory for hosts on GCE and OpenStack clouds. The 8.8.8.8 alternative resolver was dropped because there is already a default nameserver. The new var name reflects the purpose better. Also restart apiserver when modifying dns settings.	2018-01-31 00:26:07 +03:00
Andreas Krüger	088d36da09	Increase the idx counter Fix the idx counter to increase too, or you will end up with two same indexes.	2018-01-30 21:48:13 +01:00
Andreas Krüger	6f36faa4f9	Loadbalancer Apiserver Address is missing If you configure your external loadbalancer to do a simple tcp pass-through to the api servers, and you do not use a DNS FQDN but just the ip, then you need to add the ip adress to the certificates too. Example config: ``` ## External LB example config apiserver_loadbalancer_domain_name: "10.50.63.10" loadbalancer_apiserver: address: 10.50.63.10 port: 8383 ```	2018-01-30 17:33:00 +01:00
RongZhang	3846384d56	Bump kube-dns to 1.14.8 (#2204 ) Bump kube-dns to 1.14.8	2018-01-30 19:23:37 +03:00
Dmitri Rubinstein	331f141f63	Fix DNS entries in etcd's openssl.conf by adding a newline. (#2208 ) DNS entries generated from 'etcd_cert_alt_names' variable in etcd's openssl.conf are not terminated by a newline. This fixes issue #2207.	2018-01-30 16:26:58 +03:00
Matthew Mosesohn	62dd3d2a9d	Add missing group var default values to kubespray-defaults	2018-01-30 16:04:00 +03:00
Sébastien Han	fa8a128e49	etcd: ability to enable/disable ETCD_PEER_CLIENT_CERT_AUTH Some installation are failing to authenticate with peers due to etcd picking up/resoling the wrong node. By setting 'etcd_peer_client_auth' to "False" you can disable peer client cert authentication. Signed-off-by: Sébastien Han <seb@redhat.com>	2018-01-30 11:19:12 +01:00
rong.zhang	b10c308a5a	Support ipvs mode for kube-proxy Support ipvs mode for kube-proxy	2018-01-30 13:09:01 +08:00
rong.zhang	e22c70e431	Upgrade to Kubernetes v1.9.2	2018-01-30 13:04:38 +08:00
Chad Swenson	f4fe9e3421	Merge pull request #2171 from ArchiFleKs/kubeproxy-lvs Add lib/modules to kube-proxy to enable LVS	2018-01-29 22:58:02 -06:00
Brad Beam	da173615e4	Merge pull request #2048 from xizhibei/master Fix: always only one container got synced after download	2018-01-29 16:01:11 -06:00
Matthew Mosesohn	dc6a17e092	Use include/import tasks (#2192 ) import_tasks will consume far less memory, so it should be used whenever it is compatible.	2018-01-29 14:37:48 +03:00
Miouge1	240d4193ae	Update information about network sizes	2018-01-26 15:23:21 +01:00
Matthew Mosesohn	ac66e98ae9	Upgrade to Kubernetes v1.9.1 (#2152 ) Raise drain timeout to 5m	2018-01-25 18:44:44 +03:00
Matthew Mosesohn	d2935ffed0	Optionally ignore the presence of extra calico pools (#2190 )	2018-01-25 18:44:20 +03:00
Chad Swenson	c6e0fcea31	Merge pull request #1948 from sgmitchell/secured-etcd Enable etcd secure client to prevent etcdctl access without cert and key	2018-01-25 09:35:51 -06:00
Chad Swenson	5d014d986b	Merge pull request #1992 from manics/flannel-hairpin Enable flannel hairpin mode	2018-01-24 21:20:03 -06:00
mirwan	714994cad8	iptables: flush nat table as well as filter table upon reset (#2174 ) * iptables: flush nat table as well as filter table upon reset * Indentation fix	2018-01-24 20:22:49 -06:00
Brad Beam	08fe61e058	Merge pull request #2071 from riverzhang/dashboard Update dashboard version to v1.8.1	2018-01-24 20:10:05 -06:00
Brad Beam	0c8bed21ee	Merge pull request #2019 from chadswen/disable-api-insecure-port Support for disabling apiserver insecure port (the sequel)	2018-01-24 19:58:53 -06:00
Brad Beam	98eb845f8c	Merge pull request #2173 from mirwan/hardcoded_dnsmasq-autoscaler_image Dnsmasq autoscaler image should be a variable	2018-01-24 16:15:59 -06:00
Brad Beam	98300e3165	Merge pull request #2155 from brutus333/fix/pvc Fix for Issue #2141	2018-01-24 16:15:33 -06:00
Cornelius Keller	e22759d8f0	fix nodePort for weave	2018-01-24 10:31:51 +01:00
Matthew Mosesohn	bf1411060e	Add optional manual dns_mode (#2178 )	2018-01-23 14:28:42 +01:00
Virgil Chereches	a4d142368b	Renamed variable from disable_volume_zone_conflict to volume_cross_zone_attachment and removed cloud provider condition; fix identation	2018-01-23 13:14:00 +00:00
Brad Beam	eb80f9b606	Merge pull request #2154 from tdihp/proxy-conf-restart-docker Restart docker when http-proxy.conf changed.	2018-01-22 08:39:05 -06:00
Stanislav Makar	ae47b617e3	Fix 'no such host' problem (#2148 ) Fix 'no such host' problem reported by commands kubectl logs and kubectl exec when cloud_provider is OpenStack Closes: #2147	2018-01-22 16:08:24 +03:00
Erwan Miran	e5b4011aa4	move hardcoded dnsmasq autoscaler image to its own variable	2018-01-18 16:04:29 +01:00
Virgil Chereches	3125f93b3f	Added disable_volume_zone_conflict variable	2018-01-18 10:55:23 +00:00
Spencer Smith	f19c8e8c1d	Merge pull request #2132 from PhilippeChepy/flex-volumes Add support for flex volumes plugins.	2018-01-17 15:00:45 -05:00
ArchiFleKs	637604d08f	Add lib/modules to kube-proxy to enable LVS kube-proxy is complaining of missing modules at startup. There is a plan to also support an LVS implementation of kube-proxy in additon to userspace and iptables	2018-01-17 16:35:53 +01:00
Jonas Kongslund	11844c987c	Make the Kubelet read-only port configurable and disable it by default. Fixes #2159 .	2018-01-16 11:11:41 +04:00
Virgil Chereches	8c45c88d15	Fix for Issue #2141 - added policy file	2018-01-12 07:15:35 +00:00
Virgil Chereches	c87bb2f239	Fix for Issue #2141	2018-01-12 07:07:02 +00:00
heping	32eeb9a0e0	Restart docker when http-proxy.conf changed.	2018-01-12 10:56:25 +08:00
rong.zhang	df21fc8643	Remove initContainer	2018-01-10 12:17:17 +08:00
Spencer Smith	ccd9cc3dce	Merge pull request #2146 from abelgana/master Manage deprecated kubelet option	2018-01-09 17:19:42 -05:00
Spencer Smith	81867402f6	Merge pull request #2145 from pslijkhuis/master Add kubelet_custom_flags to kubelet.kubeadm.env.j2	2018-01-09 17:19:09 -05:00
Spencer Smith	4f5d61212b	Merge pull request #2144 from neith00/weave-2.1.3 updated weave to 2.1.3	2018-01-09 17:18:26 -05:00
Spencer Smith	ef96123482	Merge pull request #2068 from chadswen/remove-container-retries Retry kube container removal during upgrade	2018-01-09 15:03:50 -05:00
Spencer Smith	ee27ab0052	Merge pull request #2124 from riverzhang/patch-3 Remove blank lines	2018-01-09 14:58:49 -05:00
Spencer Smith	57f87ba083	Merge pull request #2142 from trilogy-group/hotfix/fluentd-template fix fluentd template	2018-01-09 14:44:50 -05:00
abelgana	a9bb72c6fd	require-kubeconfig is depricated since k8s v1.8	2018-01-09 14:35:42 -05:00
abelgana	9506c2e597	require-kubeconfig is deprecated since K8s v1.8	2018-01-09 14:33:05 -05:00
Peter Slijkhuis	32884357ff	Add kubelet_custom_flags to kubelet.kubeadm.env.j2	2018-01-09 14:04:36 +01:00
neith00	88204642b7	updated weave to 2.1.3	2018-01-09 13:50:42 +01:00
Matthew Mosesohn	1401286910	Add support for cert alt names for etcd (#2139 ) * Add support for cert alt names for etcd * Update gen_certs_vault.yml	2018-01-09 14:37:34 +03:00
Lukasz Piatkowski	12eb242224	fix fluentd template	2018-01-08 13:40:47 +00:00
Philippe Chepy	df9faa1743	Add support for flex volumes plugins.	2018-01-05 17:56:36 +01:00
ArchiFleKs	ce85bcaee7	Simplify and update OpenStack cloud provider Simplify the number of variables necessary to "just" enable OpenStack cloud provider. Also add the new options available in K8s 1.9.	2018-01-05 12:05:24 +01:00
rong.zhang	6ed2a60978	fix run dashboard error	2018-01-04 13:13:36 +08:00
Bogdan Dobrelya	bac3bf1a5f	Fix auto-evaluated API access endpoint for bind IP (#2086 ) Auto configure API access endpoint with a custom bind IP, if provided. Fix HA docs' http URLs are https in fact, clarify the insecure vs secure API access modes as well. Closes: #issues/2051 Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>	2018-01-03 17:40:21 +01:00
RongZhang	e3b684df21	Remove blank lines Remove blank lines	2018-01-03 00:54:04 -06:00
Steve Mitchell	e45b30d033	Add etcd key and cert environment variables for use with client auth	2018-01-02 13:52:17 -05:00
Matthew Mosesohn	ad6fecefa8	Update Kubernetes to v1.9.0 (#2100 ) Update checksum for kubeadm Use v1.9.0 kubeadm params Include hash of ca.crt for kubeadm join Update tag for testing upgrades Add workaround for testing upgrades Remove scale CI scenarios because of slow inventory parsing in ansible 2.4.x. Change region for tests to us-central1 to improve ansible performance	2017-12-25 08:57:45 +00:00
Jan Jungnickel	3fdb2ccf55	Revert back to using an empty var as default to exclude hostname (#2110 )	2017-12-22 22:09:59 +00:00
Matthew Mosesohn	29f5b55d42	remove unwanted whitespace for kube_override_hostname (#2105 )	2017-12-22 11:31:18 +00:00
rong.zhang	5aef52e8c0	fix dashboard certs secret	2017-12-22 11:17:05 +08:00
Matthew Mosesohn	6bb46e3ecb	Fix param names in preparation for Kubernetes v1.9.0 (#2098 ) This does not update v1.9.0, but fixes two incompatibilities when trying to deploy v1.9.0.	2017-12-20 10:48:09 +00:00
Matthew Mosesohn	127bc01857	Do not override kubelet hostname if cloud_provider is used (#2095 ) Starting with Kubernetes v1.8.4, kubelet ignores the AWS cloud provider string and uses the override hostname, which fails Node admission checks. Fixes #2094	2017-12-19 20:18:20 +00:00
Evan Zeimet	a6975c1850	Rename runtime docker_version (#2082 ) Renaming runtime docker_version to prevent setting that value on the command line from breaking the play run. This fixes #2081	2017-12-19 14:47:54 +00:00
Stanislav Makar	b2cb0725ac	Default OpenStack Cinder Storage Class (#2083 ) Add possibility to create default OpenStack Cinder Storage Class Closes: #1609	2017-12-19 14:47:00 +00:00
rong.zhang	b974b144a8	Add RBAC to binding Dahsboard UI	2017-12-18 23:07:19 +08:00
Matthew Mosesohn	bfb25fa47b	Change vault cert ttl to 8y (#2013 )	2017-12-15 13:34:00 +00:00
Wei Tie	3bb505d43f	Remove unrequired mounts	2017-12-14 14:59:40 -08:00
Matthew Mosesohn	b135bcb9d9	Split download container task for delegate and non-delegate modes (#2077 ) Ansible cannot seem to handle omitting delegate_to since v2.4.0.0. Possibly related: https://github.com/ansible/ansible/issues/30760	2017-12-14 16:45:54 +00:00
Wei Tie	4e97225424	Add quote for etcd endpoints	2017-12-13 18:35:12 -08:00
rong.zhang	0771cd8599	Remove dashboard_tls_key and dashboard_tls_cert	2017-12-13 15:42:20 +08:00
Fang Zhen	91d848f98a	Make spliting system_search_domains more robust The search line in /etc/resolv.conf could have multiple spaces or tabs between domains. split(' ') will give wrong results in some case, use split() without argument instead. e.g. >>> 'domain.tld cluster.tld '.split(' ') ['domain.tld\tcluster.tld', ''] >>> 'domain.tld cluster.tld '.split() ['domain.tld', 'cluster.tld']	2017-12-13 15:39:38 +08:00
rong.zhang	40edf8c6f5	Update dashboard version to v1.8.0 Update dependencies to be compatible with Kubernetes v1.8	2017-12-13 12:50:44 +08:00
Chad Swenson	e78562830f	Retry kube container removal during upgrade As we have seen with other containers, sometimes container removal fails on the first attempt due to some Docker bugs. Retrying typically corrects the issue.	2017-12-12 12:06:41 -06:00
Simon Li	bef259a6eb	Always set net.bridge.bridge-nf-call-* sysctl	2017-12-12 17:11:35 +00:00
Brad Beam	39ce1bd8be	Merge pull request #2059 from bradbeam/vaultalt Fixing alt_names for vault cert generation	2017-12-12 09:28:51 -06:00
Spencer Smith	6291881943	Merge pull request #2057 from rsmitty/master set docker_version fact regardless of docker_dns in use	2017-12-12 10:28:14 -05:00
Brad Beam	802fd94dad	Merge pull request #2054 from ArchiFleKs/os-cloud-provider-domain-fix Fix domain id for OpenStack provider	2017-12-11 21:06:16 -06:00
Xu Zhipei	66f38a1b31	fix: always only one docker image got synced after download	2017-12-12 09:51:03 +08:00
Brad Beam	d3850a4da5	Fixing alt_names for vault cert generation	2017-12-11 17:28:18 -06:00
Spencer Smith	53a4355e60	set docker_version fact regardless of docker_dns in use	2017-12-11 17:48:11 -05:00
Brad Beam	19def41fdf	Merge pull request #2047 from bradbeam/vaulttime Adding retries for vault-temp to come online	2017-12-11 09:04:57 -06:00
ArchiFleKs	44b9dce134	Fix domain id for OpenStack provider OpenStack authentication does not support using a mix of DomainID and DomainName, only one or the other should be used.	2017-12-11 15:57:33 +01:00
Brad Beam	fa5a538fe5	Merge pull request #2050 from jbonachera/fix-vault-tls-validation append newline char to vault generated certs	2017-12-11 08:41:34 -06:00
Brad Beam	9643c2c1e3	Fixes to reset (#2046 ) - adding additional directories to cleanup (rkt/vault) - targeting kubespray ansible groups instead of all	2017-12-11 12:49:21 +00:00
Brad Beam	93f3614382	Fixes #2039 - changing alt_names to be string instead of list (#2043 )	2017-12-11 12:48:07 +00:00
Brad Beam	cbc8a7d679	Merge pull request #1995 from b0r1sp/patch-1 Update main.yml	2017-12-10 21:45:02 -06:00
Julien BONACHERA	290bc993a5	append newline char to vault generated certs	2017-12-10 13:06:28 +01:00
Brad Beam	3694657eb6	Adding retries for vault-init to come online	2017-12-09 17:40:44 -06:00
Thomas Sarboni	79417e07ca	Fix systemd service unit for docker >= 17.03 (#1844 )	2017-12-08 13:12:45 +00:00
Wei Tie	dad95c873b	Remove templating for etcd members Use a etcd-initer init container to generate etcd args, it determines etcd name by comparing its ip and etcd cluster ips. This way will make etcd configuration independent to the ansible templating so that could be easier on adding master nodes.	2017-12-07 23:33:29 -08:00
Spencer Smith	626b35e1b0	Merge pull request #2005 from riverzhang/patch-1 Delete helm home	2017-12-07 11:23:30 -05:00
Wei Tie	5881ba43f8	Split contiv etcd and etcd-proxy into two daemonsets Putting contiv etcd and etcd-proxy into the same daemonset and manage the difference by a env file is not good for scaling (adding nodes). This commit split them into two daemonsets so that when adding nodes, k8s could automatically starting a etcd-proxy on new nodes without need to run related play that putting env file.	2017-12-06 22:21:50 -08:00
Brad Beam	fed7b97dcb	Merge pull request #2030 from mattymo/removerbaccheck Remove RBAC from boolean checks	2017-12-06 23:41:13 -06:00
Spencer Smith	c4458c9d9a	Merge pull request #1997 from mrbobbytables/feature-keepalived-cloud-provider Add minimal keepalived-cloud-provider support	2017-12-06 23:28:27 -05:00
riverzhang	aeb3e647d4	Remove the network device created by the flannel (#2006 ) * Remove the network device created by the flannel Remove the network device created by the flannel * Modify flannel.1 device path Modify flannel.1 device path * remove trailing spaces	2017-12-06 14:15:39 +00:00
Kuldip Madnani	fe036cbe77	Adding changes to handle updation of yum Management cache in rhel. (#2026 ) * Adding changes to handle updation of yum cache in rhel. * Removed the redundant spaces	2017-12-06 09:00:41 +00:00
Matthew Mosesohn	952ec65a40	Remove RBAC from boolean checks	2017-12-06 11:57:40 +03:00
Chad Swenson	b8788421d5	Support for disabling apiserver insecure port This allows `kube_apiserver_insecure_port` to be set to 0 (disabled). Rework of #1937 with kubeadm support Also, fixed an issue in `kubeadm-migrate-certs` where the old apiserver cert was copied as the kubeadm key	2017-12-05 09:13:45 -06:00
Brad Beam	c2347db934	Merge pull request #1953 from chadswen/dashboard-refactor Kubernetes Dashboard v1.7.1 Refactor	2017-12-05 08:50:55 -06:00
Brad Beam	27ead5d4fa	Merge pull request #2003 from abelgana/master Change altnames to alt_names	2017-12-05 08:48:32 -06:00
Stanislav Makar	6ade7c0a8d	Update k8s version to 1.8.4 (#2015 ) * Update k8s version to 1.8.4 * Update main.yml	2017-12-04 16:23:04 +00:00
Matthew Mosesohn	a0225507a0	Set helm deployment type to host (#2012 )	2017-11-29 19:52:54 +00:00
Steven Hardy	d39a88d63f	Allow setting --bind-address for apiserver hyperkube (#1985 ) * Allow setting --bind-address for apiserver hyperkube This is required if you wish to configure a loadbalancer (e.g haproxy) running on the master nodes without choosing a different port for the vip from that used by the API - in this case you need the API to bind to a specific interface, then haproxy can bind the same port on the VIP: root@overcloud-controller-0 ~]# netstat -taupen \| grep 6443 tcp 0 0 192.168.24.6:6443 0.0.0.0:* LISTEN 0 680613 134504/haproxy tcp 0 0 192.168.24.16:6443 0.0.0.0:* LISTEN 0 653329 131423/hyperkube tcp 0 0 192.168.24.16:6443 192.168.24.16:58404 ESTABLISHED 0 652991 131423/hyperkube tcp 0 0 192.168.24.16:58404 192.168.24.16:6443 ESTABLISHED 0 652986 131423/hyperkube This can be achieved e.g via: kube_apiserver_bind_address: 192.168.24.16 * Address code review feedback * Update kube-apiserver.manifest.j2	2017-11-29 15:24:02 +00:00
unclejack	e5d353d0a7	contiv network support (#1914 ) * Add Contiv support Contiv is a network plugin for Kubernetes and Docker. It supports vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies, multiple networks and bridging pods onto physical networks. * Update contiv version to 1.1.4 Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config. * Load openvswitch module to workaround on CentOS7.4 * Set contiv cni version to 0.1.0 Correct contiv CNI version to 0.1.0. * Use kube_apiserver_endpoint for K8S_API_SERVER Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks to a available endpoint no matter if there's a loadbalancer or not. * Make contiv use its own etcd Before this commit, contiv is using a etcd proxy mode to k8s etcd, this work fine when the etcd hosts are co-located with contiv etcd proxy, however the k8s peering certs are only in etcd group, as a result the etcd-proxy is not able to peering with the k8s etcd on etcd group, plus the netplugin is always trying to find the etcd endpoint on localhost, this will cause problem for all netplugins not runnign on etcd group nodes. This commit make contiv uses its own etcd, separate from k8s one. on kube-master nodes (where net-master runs), it will run as leader mode and on all rest nodes it will run as proxy mode. * Use cp instead of rsync to copy cni binaries Since rsync has been removed from hyperkube, this commit changes it to use cp instead. * Make contiv-etcd able to run on master nodes * Add rbac_enabled flag for contiv pods * Add contiv into CNI network plugin lists * migrate contiv test to tests/files Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> * Add required rules for contiv netplugin * Better handling json return of fwdMode * Make contiv etcd port configurable * Use default var instead of templating * roles/download/defaults/main.yml: use contiv 1.1.7 Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>	2017-11-29 14:24:16 +00:00
Di Xu	de422c822d	update nginx tag to use multi-arch docker image (#2009 )	2017-11-29 10:39:52 +00:00
Matthew Mosesohn	4d3326b542	Raise default vault lease TTL to 10y (#2008 )	2017-11-29 10:38:59 +00:00
riverzhang	1b82138142	Delete helm home Delete helm home	2017-11-29 13:27:09 +08:00
Christopher Randles	208ff8e350	Allow for more customization of the tiller deploy (#1946 )	2017-11-28 18:33:57 +00:00
Matthew Mosesohn	ec54b36e05	add retries for calico/canal etcd commands (#2007 )	2017-11-28 16:39:55 +00:00
Spencer Smith	38e8522cbf	Merge pull request #1983 from tomdee/bump-flannel-ver Bump flannel version to v0.9.1	2017-11-28 11:38:55 -05:00
Spencer Smith	52f8687397	Merge pull request #1977 from mattymo/initializers Disable initializers feature gate if istio is not used	2017-11-28 11:37:41 -05:00
Spencer Smith	43600ffcf8	Merge pull request #1972 from chadswen/master-static-pod-flush Additional flush for static pod master upgrade	2017-11-28 11:36:38 -05:00
Christopher Randles	938d2d9e6e	update helm/tiller to v2.7.2 -- security bugfix (#1986 )	2017-11-28 14:52:42 +00:00
Kevin Lefevre	9368dbe0e7	update calico to 2.6.2 (#1874 ) Move RS to deployment so no need to take care of the revision history limits : - Delete the old RS - Make Calico manifest a deployment - move deployments to apps/v1beta2 API since Kubernetes 1.8	2017-11-28 12:01:30 +00:00
abelgana	fe3290601a	The variable altnames is used by this task. Since the value will change on the default. It needs to change here also.	2017-11-27 06:57:16 -05:00
abelgana	e7173e1d62	Change altnames to alt_names Hi, Could you please check if it was a typo? https://www.vaultproject.io/api/secret/pki/ Regards,	2017-11-25 17:29:21 -05:00
Bogdan Dobrelya	8aafe64397	Defaults for apiserver_loadbalancer_domain_name (#1993 ) * Defaults for apiserver_loadbalancer_domain_name When loadbalancer_apiserver is defined, use the apiserver_loadbalancer_domain_name with a given default value. Fix unconsistencies for checking if apiserver_loadbalancer_domain_name is defined AND using it with a default value provided at once. Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru> * Define defaults for LB modes in common defaults Adjust the defaults for apiserver_loadbalancer_domain_name and loadbalancer_apiserver_localhost to come from a single source, which is kubespray-defaults. Removes some confusion and simplefies the code. Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>	2017-11-23 16:15:48 +00:00
Bob Killen	2140303fcc	add minimal keepalived-cloud-provider support	2017-11-23 08:43:36 -05:00
brx	b80ded63ca	Update main.yml just a small spelling mistake	2017-11-21 22:37:52 +01:00
Simon Li	7be2521a31	Add flannel hairping mode	2017-11-21 10:43:50 +00:00
Tom Denham	15b9d54a32	Bump flannel version to v0.9.1	2017-11-16 12:52:18 -07:00
Spencer Smith	bc1a4e12ad	fix broken variable in ansible 2.4.1.0 and ensure tasks for calico-rr (#1982 )	2017-11-16 18:44:15 +00:00
Matthew Mosesohn	67419e8d0a	Run rotate_tokens role only once (#1970 )	2017-11-15 18:50:23 +00:00
Chad Swenson	849aaf7435	Update to k8s 1.8.3 (#1971 )	2017-11-15 17:43:22 +00:00
Chad Swenson	a89ee8c406	Add ability to use custom cert secret instead of init container provisioned self-signed certs	2017-11-15 10:05:52 -06:00
Chad Swenson	0c6f172e75	Kubernetes Dashboard v1.7.1 Refactor This version required changing the previous access model for dashboard completely but it's a change for the better. Docs were updated. * New login/auth options that use apiserver auth proxying by default * Requires RBAC in `authorization_modes` * Only serves over https * No longer available at https://first_master:6443/ui until apiserver is updated with the https proxy URL: * Can access from https://first_master:6443/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/#!/login you will be prompted for credentials * Or you can run 'kubectl proxy' from your local machine to access dashboard in your browser from: http://localhost:8001/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/ * It is recommended to access dashboard from behind a gateway that enforces an authentication token, details and other access options here: https://github.com/kubernetes/dashboard/wiki/Accessing-Dashboard---1.7.X-and-above	2017-11-15 10:05:48 -06:00
Matthew Mosesohn	a67349b076	Disable initializers feature gate if istio is not used	2017-11-15 12:56:36 +00:00
Matthew Mosesohn	f9b68a5d17	Revert "Support for disabling apiserver insecure port" (#1974 )	2017-11-14 13:41:28 +00:00
chenhonggc	c7910b51a1	--peers DEPRECATED - --endpoints should be used instead (#1943 )	2017-11-14 11:28:35 +00:00
Chad Swenson	1f99710b21	Additional flush for static pod master upgrade Thought this wasn't required at first but I forgot there's no auto flush at the end of these tasks since the `kubernetes/master` role is not the end of the play.	2017-11-13 18:11:57 -06:00
Aivars Sterns	5e558c361b	update weave-net to 2.0.5 version (#1877 )	2017-11-13 16:11:47 +00:00
neith00	5f39efcdfd	adding mount for kubelet to enable rbd mounts (#1957 ) * adding mount for kubelet to enable rbd mounts * fix conditionnal variable name	2017-11-13 14:04:13 +00:00
Stanislav Makar	037edf1215	Fix failed task of setting up bash completion for helm (#1968 ) Closes: #1967	2017-11-13 10:15:53 +00:00
Hyunsun Moon	37125866ca	Make calico_node_ignorelooserpf have an effect (#1945 )	2017-11-13 09:35:13 +00:00
Günther Grill	421e73b87c	Add missing exclamation mark in shebang line (#1966 )	2017-11-13 09:34:21 +00:00
Brad Beam	c115e5677e	Merge pull request #1828 from hzamani/patch-1 Use etcd_access_addresses for vault_etcd_url	2017-11-10 10:56:37 -05:00
Spencer Smith	09d85631dc	Merge pull request #1944 from chadswen/reload-master-pods Master component and kubelet container upgrade fixes	2017-11-08 22:23:12 -05:00
Brad Beam	f25e4dc3ed	Merge pull request #1937 from chadswen/disable-api-insecure-port Support for disabling apiserver insecure port	2017-11-08 18:13:49 -05:00
Spencer Smith	0126168472	provide environment for rkt trust and run with etcd	2017-11-08 12:57:22 -05:00
Chad Swenson	e9f795c5ce	Master component and kubelet container upgrade fixes * Fixes an issue where apiserver and friends (controller manager, scheduler) were prevented from restarting after manifests/secrets are changed. This occurred when a replaced kubelet doesn't reconcile new master manifests, which caused old master component versions to linger during deployment. In my case this was causing upgrades from k8s 1.6/1.7 -> k8s 1.8 to fail * Improves transitions from kubelet container to host kubelet by preventing issues where kubelet container reappeared during the deployment	2017-11-08 01:40:33 -06:00
Chad Swenson	0c7e1889e4	Support for disabling apiserver insecure port This allows `kube_apiserver_insecure_port` to be set to 0 (disabled). It's working, but so far I have had to: 1. Make the `uri` module "Wait for apiserver up" checks use `kube_apiserver_port` (HTTPS) 2. Add apiserver client cert/key to the "Wait for apiserver up" checks 3. Update apiserver liveness probe to use HTTPS ports 4. Set `kube_api_anonymous_auth` to true to allow liveness probe to hit apiserver's /healthz over HTTPS (livenessProbes can't use client cert/key unfortunately) 5. RBAC has to be enabled. Anonymous requests are in the `system:unauthenticated` group which is granted access to /healthz by one of RBAC's default ClusterRoleBindings. An equivalent ABAC rule could allow this as well. Changes 1 and 2 should work for everyone, but 3, 4, and 5 require new coupling of currently independent configuration settings. So I also added a new settings check. Options: 1. The problem goes away if you have both anonymous-auth and RBAC enabled. This is how kubeadm does it. This may be the best way to go since RBAC is already on by default but anonymous auth is not. 2. Include conditional templates to set a different liveness probe for possible combinations of `kube_apiserver_insecure_port = 0`, RBAC, and `kube_api_anonymous_auth` (won't be possible to cover every case without a guaranteed authorizer for the secure port) 3. Use basic auth headers for the liveness probe (I really don't like this, it adds a new dependency on basic auth which I'd also like to leave independently configurable, and it requires encoded passwords in the apiserver manifest) Option 1 seems like the clear winner to me, but is there a reason we wouldn't want anonymous-auth on by default? The apiserver binary defaults anonymous-auth to true, but kubespray's default was false.	2017-11-06 14:01:10 -06:00
Günther Grill	0d55ed3600	Avoid that some read-only tasks cause an ansible-change (#1910 )	2017-11-06 13:51:07 +00:00
Haiwei Liu	ad0cd6939a	Add support cAdvisor (#1908 ) Signed-off-by: Haiwei Liu <carllhw@gmail.com>	2017-11-06 13:50:28 +00:00
Stanislav Makar	33adb334cd	Fix openstack tenant id variable name (#1932 )	2017-11-05 08:40:41 +00:00
Spencer Smith	ef87a8a1f0	Merge pull request #1916 from vtomasr5/master Fix bad handler directory name in kubeadm role	2017-11-03 18:14:48 -04:00
Spencer Smith	a595c84f7e	Merge pull request #1928 from chadswen/flannel-rbac-fix Flannel RBAC Fix	2017-11-03 18:12:16 -04:00
Chad Swenson	b158dbcf79	Docker Version Update Update default docker version to 17.03.1	2017-11-03 12:34:45 -05:00
Matthew Mosesohn	ab3832f3e7	Set host IP for kubelet always (#1924 ) * Set host IP for kubelet always Use ansible default IP if ip var is not set. * Update main.yml	2017-11-03 10:19:37 +00:00
Kevin Lefevre	9bf415f749	update helm to v2.7.0 (#1875 ) * update helm to v2.7.0 * Update main.yml	2017-11-03 07:15:00 +00:00
Günther Grill	a2bda9e5f1	Eliminate jinja2 template expression warning and rename coreos-python var (#1911 ) * Change deprecated vagrant ansible flag 'sudo' to 'become' * Emphasize, that the name of the pip_pyton_modules is only considered in coreos * Remove useless unused variable * Fix warning when jinja2 template-delimiters used in when statement There is no need for jinja2 template-delimiters like {{ }} or {% %} any more. They can just be omitted as described in https://github.com/ansible/ansible/issues/22397 * Fix broken link in getting-started guide	2017-11-03 07:11:36 +00:00
Günther Grill	0195725563	Workaround ansible bug where access var via dict doesn't get real value (#1912 ) * Change deprecated vagrant ansible flag 'sudo' to 'become' * Workaround ansible bug where access var via dict doesn't get real value When accessing a variable via it's name "{{ foo }}" its value is retrieved. But when the variable value is retrieved via the vars-dict "{{ vars['foo'] }}" this doesn't resolve the expression of the variable any more due to a bug. So e.g. a expression foo="{{ 1 == 1 }}" isn't longer resolved but just returned as string "1 == 1". * Make file yamllint complient	2017-11-03 07:11:14 +00:00
Spencer Smith	ec1170bd37	only mount volumes if local_volumes_enabled is true. fix mount flags in rkt. (#1923 )	2017-11-03 07:10:37 +00:00
Matthew Mosesohn	66c67dbe73	Add optional helm deployment mode for host (#1920 )	2017-11-03 07:09:24 +00:00
Chad Swenson	16ae2c1809	Flannel RBAC Fix Fixes a bug that can occur if `cni-flannel-rbac.yml` was written but the playbook failed before it was applied. Uses the same approach as calico.	2017-11-02 23:20:23 -05:00
Spencer Smith	4771716ab2	Merge pull request #1907 from mattymo/disable_anon_auth Block anonymous auth requests to kubelet	2017-11-02 12:01:39 -04:00
Spencer Smith	b156585739	Merge pull request #1917 from chadswen/docker-daemon-graph Fix kubelet container with alternate Docker data paths	2017-11-02 11:58:55 -04:00
Matthew Mosesohn	520103df78	Change namespace for provisioner account	2017-11-02 10:16:08 +00:00
Matthew Mosesohn	3e3787de15	Fix local volume provisioner mount point for rkt	2017-11-02 09:45:26 +00:00
Chad Swenson	0c824d5ef1	Fix kubelet container with alternate Docker data paths Some time ago I think the hardcoded `/var/lib/docker` was required, but kubelet running in a container has been aware of the Docker path since at least as far back as k8s 1.6. Without this change, you see a large number of errors in the kubelet logs if you installed with a non-default `docker_daemon_graph`	2017-11-01 13:25:15 -05:00
Matthew Mosesohn	c0e989b17c	New addon: local_volume_provisioner (#1909 )	2017-11-01 14:25:35 +00:00
Vicenç Juan Tomàs Montserrat	5218b3af82	Fix bad handler directory name in kubeadm role	2017-11-01 14:36:28 +01:00
Spencer Smith	ef0a91da27	Merge pull request #1891 from rsmitty/proxy-fixes Improved proxy support	2017-10-31 14:32:12 -04:00
Spencer Smith	8412181746	Merge pull request #1899 from skyscooby/update_kube182 Update to Kubernetes 1.8.2	2017-10-31 14:30:56 -04:00
Spencer Smith	400ee2aa57	Merge pull request #1898 from skyscooby/update_kubedns Update kubedns to 1.14.7 release	2017-10-31 14:30:36 -04:00
Spencer Smith	05b8466f87	Merge pull request #1890 from chadswen/apt-repo-params Parameterize dockerproject apt repo endpoints	2017-10-31 14:29:19 -04:00
Spencer Smith	19962f6b6a	fix indentation for master template (#1906 )	2017-10-31 06:43:54 +00:00
Matthew Mosesohn	f7703dbca3	Block anonymous auth requests to kubelet	2017-10-30 19:06:54 +00:00
Spencer Smith	74a9eedb93	helm template check for http/https_proxy	2017-10-30 13:11:04 -04:00
Spencer Smith	6df104b275	don't check for no_proxy, only http/https_proxy. fix linting issues.	2017-10-30 11:42:14 -04:00
Spencer Smith	b27453d8d8	improved proxy support	2017-10-30 11:42:14 -04:00
Spencer Smith	4470ee4ccf	Merge pull request #1887 from mattymo/fix_indent_apiserver fix indentation for network policy option	2017-10-30 11:33:13 -04:00
Andrew Greenwood	8a86acf75d	Update kubespray-defaults kubernetes to v1.8.2	2017-10-30 09:34:32 -04:00
abelgana	d738acf638	Update kubelet.kubeadm.env.j2 (#1901 )	2017-10-30 11:33:02 +00:00
tanshanshan	84d92aa3c7	fix-bug (#1900 )	2017-10-30 11:23:24 +00:00
Andrew Greenwood	dd01cabcdc	Update to kubernetes 1.8.2	2017-10-29 22:13:06 -04:00
Andrew Greenwood	c383c7e2c1	Update kubedns image to latest	2017-10-29 21:58:05 -04:00
Andrew Greenwood	958bb5285d	Update kubedns image to latest	2017-10-29 21:57:32 -04:00
Spencer Smith	f0317ae70b	Merge pull request #1876 from ArchiFleKs/update_flannel update flannel	2017-10-27 15:22:54 -04:00
Spencer Smith	591941bd39	Merge pull request #1884 from abelgana/master Sysctl reload if needed after IP forward enabling	2017-10-27 15:12:08 -04:00
Spencer Smith	e90769c869	Merge pull request #1888 from chapsuk/issue_1885 Disable swap in vagrant vms	2017-10-27 15:10:16 -04:00
Chad Swenson	256bbb1a8a	Parameterize apt repo endpoints This allows overriding of apt repo endpoints when internet sources are not accessible. Additionally, switch to using the dockerproject.org gpg key url for apt instead of keyservers.net	2017-10-27 13:48:11 -05:00
mkrasilnikov	2c7c956be9	Disable swap in vagrant vms	2017-10-27 19:57:54 +03:00
Matthew Mosesohn	fe81bba08d	Force kubelet certificates to be generated as lowercase (#1886 ) All nodes get converted to lowercase, so certs should set CN with lowercase as well.	2017-10-27 15:58:25 +01:00
Matthew Mosesohn	564de07963	fix indentation for network policy option	2017-10-27 14:56:22 +01:00
Aivars Sterns	84cf6fbe83	change ssh_args/bastion configuration (#1883 )	2017-10-27 12:18:39 +01:00
abelgana	d9160f19c0	Sysctl reload if needed after IP forward enabling Add reload yes to reload sysctl if the value of net.ipv4.ip_forward changes. - name: Enable ip forwarding sysctl: sysctl_file: "{{sysctl_file_path}}" name: net.ipv4.ip_forward value: 1 state: present reload: yes tags: - bootstrap-os	2017-10-26 13:06:21 -04:00
Brad Beam	ba0a03a8ba	Merge pull request #1880 from mattymo/node_auth_fixes2 Move cluster roles and system namespace to new role	2017-10-26 10:02:24 -05:00
Matthew Mosesohn	b0f04d925a	Update network policy setting for Kubernetes 1.8 (#1879 ) It is now enabled by default in 1.8 with the api changed to networking.k8s.io/v1 instead of extensions/v1beta1.	2017-10-26 15:35:26 +01:00
Matthew Mosesohn	ec53b8b66a	Move cluster roles and system namespace to new role This should be done after kubeconfig is set for admin and before network plugins are up.	2017-10-26 14:36:05 +01:00
ArchiFleKs	6e949bf951	update flannel	2017-10-26 11:18:06 +02:00
Matthew Mosesohn	86fb669fd3	Idempotency fixes (#1838 )	2017-10-25 21:19:40 +01:00
Matthew Mosesohn	7123956ecd	update checksum for kubeadm (#1869 )	2017-10-25 21:15:16 +01:00
Spencer Smith	46cf6b77cf	Merge pull request #1857 from pmontanari/patch-1 Use same kubedns_version: 1.14.5 in downloads and kubernetes-apps/ansible roles	2017-10-25 10:05:43 -04:00
Matthew Mosesohn	a52bc44f5a	Fix broken CI jobs (#1854 ) * Fix broken CI jobs Adjust image and image_family scenarios for debian. Checkout CI file for upgrades * add debugging to file download * Fix download for alternate playbooks * Update ansible ssh args to force ssh user * Update sync_container.yml	2017-10-25 11:45:54 +01:00
Matthew Mosesohn	acb63a57fa	Only limit etcd memory on small hosts (#1860 ) Also disable oom killer on etcd	2017-10-25 10:25:15 +01:00
Flavio Percoco Premoli	5b08277ce4	Access dict item's value keys using .value (#1865 )	2017-10-24 20:49:36 +01:00
Chiang Fong Lee	5dc56df64e	Fix ordering of kube-apiserver admission control plug-ins (#1841 )	2017-10-24 17:28:07 +01:00
Matthew Mosesohn	33c4d64b62	Make ClusterRoleBinding to admit all nodes with right cert (#1861 ) This is to work around #1856 which can occur when kubelet hostname and resolvable hostname (or cloud instance name) do not match.	2017-10-24 17:05:58 +01:00
Matthew Mosesohn	25de6825df	Update Kubernetes to v1.8.1 (#1858 )	2017-10-24 17:05:45 +01:00
Peter Lee	0b60201a1e	fix etcd health check bug (#1480 )	2017-10-24 16:10:56 +01:00
Haiwei Liu	cfea99c4ee	Fix scale.yml to supoort kubeadm (#1863 ) Signed-off-by: Haiwei Liu <carllhw@gmail.com>	2017-10-24 16:08:48 +01:00
Matthew Mosesohn	cea41a544e	Use include instead of import tasks to support v2.3 (#1855 ) Eventually 2.3 support will be dropped, so this is a temporary change.	2017-10-23 13:56:03 +01:00
pmontanari	8371a060a0	Update main.yml Match kubedns_version with roles/download/defaults/main.yml:kubedns_version: 1.14.5	2017-10-22 23:48:51 +02:00
Matthew Mosesohn	7ed140cea7	Update refs to kubernetes version to v1.8.0 (#1845 )	2017-10-20 08:29:28 +01:00
Matthew Mosesohn	0b4fcc83bd	Fix up warnings and deprecations (#1848 )	2017-10-20 08:25:57 +01:00
Matthew Mosesohn	514359e556	Improve etcd scale up (#1846 ) Now adding unjoined members to existing etcd cluster occurs one at a time so that the cluster does not lose quorum.	2017-10-20 08:02:31 +01:00
Matthew Mosesohn	fc9a65be2b	Refactor downloads to use download role directly (#1824 ) * Refactor downloads to use download role directly Also disable fact delegation so download delegate works acros OSes. * clean up bools and ansible_os_family conditionals	2017-10-19 09:17:11 +01:00
Jan Jungnickel	49dff97d9c	Relabel controler-manager to kube-controller-manager (#1830 ) Fixes #1129	2017-10-18 17:29:18 +01:00
Matthew Mosesohn	4efb0b78fa	Move CI vars out of gitlab and into var files (#1808 )	2017-10-18 17:28:54 +01:00
Hassan Zamani	c9fe8fde59	Use fail-swap-on flag only for kube_version >= 1.8 (#1829 )	2017-10-18 16:32:38 +01:00
Matthew Mosesohn	16462292e1	Properly skip extra SANs when not specified for kubeadm (#1831 )	2017-10-18 12:04:13 +01:00
pmontanari	20d80311f0	Update main.yml (#1822 ) * Update main.yml Needs to set up resolv.conf before updating Yum cache otherwise no name resolution available (resolv.conf empty). * Update main.yml Removing trailing spaces	2017-10-18 11:42:00 +01:00
Hassan Zamani	3acc42c5b3	Use etcd_access_addresses for vault_etcd_url	2017-10-17 19:27:36 +03:30
Tennis Smith	54320c5b09	set to 3 digit version number (#1817 )	2017-10-17 11:14:29 +01:00
Seungkyu Ahn	291b71ea3b	Changing default value string to boolean. (#1669 ) When downloading containers or files, use boolean as a default value.	2017-10-17 11:14:12 +01:00
Rémi de Passmoilesel	356515222a	Add possibility to insert more ip adresses in certificates (#1678 ) * Add possibility to insert more ip adresses in certificates * Add newline at end of files * Move supp ip parameters to k8s-cluster group file * Add supplementary addresses in kubeadm master role * Improve openssl indexes	2017-10-17 11:06:07 +01:00
Aivars Sterns	688e589e0c	fix #1788 lock dashboard version to 1.6.3 version while 1.7.x is not working (#1805 )	2017-10-17 11:04:55 +01:00
刘旭	6c98201aa4	remove kube-dns versions and images in kubernetes-apps/ansible/defaults/main.yaml (#1807 )	2017-10-17 11:03:53 +01:00
Matthew Mosesohn	d4b10eb9f5	Fix path for calico get node names (#1816 )	2017-10-17 10:54:48 +01:00
Jiří Stránský	728d56e74d	Only write bastion ssh config when needed (#1810 ) This will allow running Kubespray when the user who runs it doesn't have write permissions to the Kubespray dir, at least when not using bastion.	2017-10-17 10:28:45 +01:00
neith00	77f1d4b0f1	Revert "Update roadmap" (#1809 ) * Revert "Debian jessie docs (#1806)" This reverts commit `d78577c810`. * Revert "[contrib/network-storage/glusterfs] adds service for glusterfs endpoint (#1800)" This reverts commit `5fb6b2eaf7`. * Revert "[contrib/network-storage/glusterfs] bootstrap for glusterfs nodes (#1799)" This reverts commit `404caa111a`. * Revert "Fixed kubelet standard log environment (#1780)" This reverts commit `b838468500`. * Revert "Add support for fedora atomic host (#1779)" This reverts commit `f2235be1d3`. * Revert "Update network-plugins to use portmap plugin (#1763)" This reverts commit `6ec45b10f1`. * Revert "Update roadmap (#1795)" This reverts commit `d9879d8026`.	2017-10-16 14:09:24 +01:00
Seungkyu Ahn	b838468500	Fixed kubelet standard log environment (#1780 ) Change KUBE_LOGGING to KUBE_LOGTOSTDERR, when installing kubelet as host type.	2017-10-16 08:22:54 +01:00
Jason Brooks	f2235be1d3	Add support for fedora atomic host (#1779 ) * don't try to install this rpm on fedora atomic * add docker 1.13.1 for fedora * built-in docker unit file is sufficient, as tested on both fedora and centos atomic	2017-10-16 08:03:33 +01:00
Kevin Lefevre	6ec45b10f1	Update network-plugins to use portmap plugin (#1763 ) Portmap allow to use hostPort with CNI plugins. Should fix #1675	2017-10-16 07:11:38 +01:00
Matthew Mosesohn	d9879d8026	Update roadmap (#1795 )	2017-10-16 07:06:06 +01:00
Matthew Mosesohn	d487b2f927	Security best practice fixes (#1783 ) * Disable basic and token auth by default * Add recommended security params * allow basic auth to fail in tests * Enable TLS authentication for kubelet	2017-10-15 20:41:17 +01:00
Julian Poschmann	66e5e14bac	Restart kubelet on update in deployment-type host on update (#1759 ) * Restart kubelet on update in deployment-type host on update * Update install_host.yml * Update install_host.yml * Update install_host.yml	2017-10-15 20:22:17 +01:00
Matthew Mosesohn	7e4668859b	Change file used to check kubeadm upgrade method (#1784 ) * Change file used to check kubeadm upgrade method Test for ca.crt instead of admin.conf because admin.conf is created during normal deployment. * more fixes for upgrade	2017-10-15 10:33:22 +01:00
Matthew Mosesohn	92d038062e	Fix node authorization for cloudprovider installs (#1794 ) In 1.8, the Node authorization mode should be listed first to allow kubelet to access secrets. This seems to only impact environments with cloudprovider enabled.	2017-10-14 11:28:46 +01:00
abelgana	2972bceb90	Changre raw execution to use yum module (#1785 ) * Changre raw execution to use yum module Changed raw exection to use yum module provided by Ansible. * Replace ansible_ssh_* by ansible_* Ansible 2.0 has deprecated the “ssh” from ansible_ssh_user, ansible_ssh_host, and ansible_ssh_port to become ansible_user, ansible_host, and ansible_port. If you are using a version of Ansible prior to 2.0, you should continue using the older style variables (ansible_ssh_*). These shorter variables are ignored, without warning, in older versions of Ansible. I am not sure about the broader impact of this change. But I have seen on the requirements the version required is ansible>=2.4.0. http://docs.ansible.com/ansible/latest/intro_inventory.html	2017-10-14 09:52:40 +01:00
刘旭	cb0a60a0fe	calico v2.5.0 should use calico/routereflector:v0.4.0 (#1792 )	2017-10-14 09:51:48 +01:00
Matthew Mosesohn	3ee91e15ff	Use commas in no_proxy (#1782 )	2017-10-13 15:43:10 +01:00
Matthew Mosesohn	ef47a73382	Add new addon Istio (#1744 ) * add istio addon * add addons to a ci job	2017-10-13 15:42:54 +01:00
Matthew Mosesohn	dc515e5ac5	Remove kernel-upgrade role (#1798 ) This role only support Red Hat type distros and is not maintained or used by many users. It should be removed because it creates feature disparity between supported OSes and is not maintained.	2017-10-13 15:36:21 +01:00
Julian Poschmann	56763d4288	Persist br_netfilter module loading (#1760 )	2017-10-13 10:50:29 +01:00
Matthew Mosesohn	10dd049912	Revert "Security fixes for etcd (#1778 )" (#1786 ) This reverts commit `4209f1cbfd`.	2017-10-12 14:02:51 +01:00
Matthew Mosesohn	4209f1cbfd	Security fixes for etcd (#1778 ) * Security fixes for etcd * Use certs when querying etcd	2017-10-12 13:32:54 +01:00
Matthew Mosesohn	ee83e874a8	Clear admin kubeconfig when rotating certs (#1772 ) * Clear admin kubeconfig when rotating certs * Update main.yml	2017-10-12 09:55:46 +01:00
Vijay Katam	27ed73e3e3	Rename dns_server, add var for selinux. (#1572 ) * Rename dns_server to dnsmasq_dns_server so that it includes role prefix as the var name is generic and conflicts when integrating with existing ansible automation. * Enable selinux state to be configurable with new var preinstall_selinux_state	2017-10-11 20:40:21 +01:00
Aivars Sterns	e41c0532e3	add possibility to disable fail with swap (#1773 )	2017-10-11 19:49:31 +01:00
Matthew Mosesohn	eeb7274d65	Adjust memory reservation for master nodes (#1769 )	2017-10-11 19:47:42 +01:00
Matthew Mosesohn	eb0dcf6063	Improve proxy (#1771 ) * Set no_proxy to all local ips * Use proxy settings on all necessary tasks	2017-10-11 19:47:27 +01:00
Matthew Mosesohn	83be0735cd	Fix setting etcd client cert serial (#1775 )	2017-10-11 19:47:11 +01:00
Matthew Mosesohn	fe4ba51d1a	Set node IP correctly (#1770 ) Fixes #1741	2017-10-11 15:28:42 +01:00
Hyunsun Moon	adf575b75e	Set default value for disable_shared_pid (#1710 ) PID namespace sharing is disabled only in Kubernetes 1.7. Explicitily enabling it by default could help reduce unexpected results when upgrading to or downgrading from 1.7.	2017-10-11 14:55:51 +01:00
Spencer Smith	e5426f74a8	Merge pull request #1762 from manics/bindir-helm Include bin_dir when patching helm tiller with kubectl	2017-10-10 10:40:47 -04:00
Spencer Smith	f5212d3b79	Merge pull request #1752 from pmontanari/patch-1 Force synchronize to use ssh_args so it works when using bastion	2017-10-10 10:40:01 -04:00
Spencer Smith	3d09c4be75	Merge pull request #1756 from kubernetes-incubator/fix_bool_assert Fix bool check assert	2017-10-10 10:38:53 -04:00
Spencer Smith	f2db15873d	Merge pull request #1754 from ArchiFleKs/rkt-kubelet-fix add hosts to rkt kubelet	2017-10-10 10:37:36 -04:00
ArchiFleKs	7c663de6c9	add /etc/hosts volume to rkt templates	2017-10-09 16:41:51 +02:00
Simon Li	c14bbcdbf2	Include bin_dir when patching helm tiller with kubectl	2017-10-09 15:17:52 +01:00
ant31	1be4c1935a	Fix bool check assert	2017-10-06 17:02:38 +00:00
pmontanari	764b1aa5f8	Force synchronize to use ssh_args so it works when using bastion In case ssh.config is set to use bastion, synchronize needs to use it too.	2017-10-06 00:21:54 +02:00
Spencer Smith	d13b07ba59	Merge pull request #1751 from bradbeam/calicoprometheus Adding calico/node env vars for prometheus configuration	2017-10-05 17:29:12 -04:00
Brad Beam	55dfae2a52	Followup fix for CVE-2017-14491	2017-10-05 11:31:04 -05:00
Brad Beam	b81c0d869c	Adding calico/node env vars for prometheus configuration	2017-10-05 08:46:01 -05:00
Matthew Mosesohn	f14f04c5ea	Upgrade to kubernetes v1.8.0 (#1730 ) * Upgrade to kubernetes v1.8.0 hyperkube no longer contains rsync, so now use cp * Enable node authorization mode * change kube-proxy cert group name	2017-10-05 10:51:21 +01:00
Aivars Sterns	9c86da1403	Normalize tags in all places to prepare for tag fixing in future (#1739 )	2017-10-05 08:43:04 +01:00
Spencer Smith	cb611b5ed0	Merge pull request #1742 from mattymo/facts_as_vars Move set_facts to kubespray-defaults defaults	2017-10-04 15:46:39 -04:00
Spencer Smith	ab171a1d6d	don't delegate cert slurp	2017-10-04 13:06:51 -04:00
Matthew Mosesohn	a56738324a	Move set_facts to kubespray-defaults defaults These facts can be generated in defaults with a performance boost. Also cleaned up duplicate etcd var names.	2017-10-04 14:02:47 +01:00
Matthew Mosesohn	e42cb43ca5	add bootstrap for debian (#1726 )	2017-10-03 08:30:45 +01:00
Brad Beam	ca541c7e4a	Ensuring vault service is stopped in reset tasks (#1736 )	2017-10-03 08:30:28 +01:00
Brad Beam	96e14424f0	Adding kubedns update for CVE-2017-14491 (#1735 )	2017-10-03 08:30:14 +01:00
Matthew Mosesohn	dae9f6d3c2	Test if tokens are expired from host instead of inside container (#1727 ) * Test if tokens are expired from host instead of inside container * Update main.yml	2017-10-02 13:14:50 +01:00
Julian Poschmann	8e1210f96e	Fix cluster-network w/ prefix > 25 not possible with CNI (#1713 )	2017-10-01 10:43:00 +01:00
Brad Beam	1b9a6d7ad8	Merge pull request #1672 from manics/bastion-proxycommand-newline Insert a newline in bastion ssh config after ProxyCommand conditional	2017-09-29 11:37:47 -05:00
Peter Slijkhuis	371fa51e82	Make installation of EPEL optional (#1721 )	2017-09-29 13:44:29 +01:00
Matthew Mosesohn	a55675acf8	Enable RBAC with kubeadm always (#1711 )	2017-09-29 09:18:24 +01:00
Matthew Mosesohn	25dd3d476a	Fix error for azure+calico assert (#1717 ) Fixes #1716	2017-09-29 08:17:18 +01:00
Matthew Mosesohn	3ff5f40bdb	fix graceful upgrade (#1704 ) Fix system namespace creation Only rotate tokens when necessary	2017-09-27 14:49:20 +01:00
Matthew Mosesohn	689ded0413	Enable kubeadm upgrades to any version (#1709 )	2017-09-27 14:48:18 +01:00
Matthew Mosesohn	327ed157ef	Verify valid settings before deploy (#1705 ) Also fix yaml lint issues Fixes #1703	2017-09-27 14:47:47 +01:00
tanshanshan	477afa8711	when and run_once are reduplicative (#1694 )	2017-09-26 14:48:05 +01:00
Matthew Mosesohn	bd272e0b3c	Upgrade to kubeadm (#1667 ) * Enable upgrade to kubeadm * fix kubedns upgrade * try upgrade route * use init/upgrade strategy for kubeadm and ignore kubedns svc * Use bin_dir for kubeadm * delete more secrets * fix waiting for terminating pods * Manually enforce kube-proxy for kubeadm deploy * remove proxy. update to kubeadm 1.8.0rc1	2017-09-26 10:38:58 +01:00
Brad Beam	14c232e3c4	Merge pull request #1663 from foxyriver/fix-shell use command module instead of shell module	2017-09-25 13:24:45 -05:00
Brad Beam	57f5fb1f4f	Merge pull request #1661 from neith00/master upgrading from weave version 2.0.1 to 2.0.4	2017-09-25 13:23:57 -05:00
Bogdan Dobrelya	bcddfb786d	Merge pull request #1692 from mattymo/old-etcd-logic drop unused etcd logic	2017-09-25 17:44:33 +02:00
Martin Uddén	20db1738fa	feature: install project atomic CSS on RedHat family (#1499 ) * feature: install project atomic CSS on RedHat family * missing patch for this feature * sub-role refactor * Yamllint fix	2017-09-25 12:29:17 +01:00
Hassan Zamani	b23d81f825	Add etcd_blkio_weight var (#1690 )	2017-09-25 12:20:24 +01:00
Matthew Mosesohn	a1cde03b20	Correct master manifest cleanup logic (#1693 ) Fixes #1666	2017-09-25 12:19:04 +01:00
Bogdan Dobrelya	cfce23950a	Merge pull request #1687 from jistr/cgroup-driver-kubeadm Set correct kubelet cgroup-driver also for kubeadm deployments	2017-09-25 11:16:40 +02:00
Deni Bertovic	64740249ab	Adds tags for asserts (#1639 )	2017-09-25 08:41:03 +01:00
Matthew Mosesohn	126f42de06	drop unused etcd logic Fixes #1660	2017-09-25 07:52:55 +01:00
Matthew Mosesohn	d94e3a81eb	Use api lookup for kubelet hostname when using cloudprovider (#1686 ) The value cannot be determined properly via local facts, so checking k8s api is the most reliable way to look up what hostname is used when using a cloudprovider.	2017-09-24 09:22:15 +01:00
Jiri Stransky	70d0235770	Set correct kubelet cgroup-driver also for kubeadm deployments This follows pull request #1677, adding the cgroup-driver autodetection also for kubeadm way of deploying. Info about this and the possibility to override is added to the docs.	2017-09-22 13:19:04 +02:00
foxyriver	30b5493fd6	use command module instead of shell module	2017-09-22 15:47:03 +08:00
Jiri Stransky	dbbe9419e5	Allow setting cgroup driver for kubelet Red Hat family platforms run docker daemon with `--exec-opt native.cgroupdriver=systemd`. When kubespray tried to start kubelet service, it failed with: Error: failed to run Kubelet: failed to create kubelet: misconfiguration: kubelet cgroup driver: "cgroupfs" is different from docker cgroup driver: "systemd" Setting kubelet's cgroup driver to the correct value for the platform fixes this issue. The code utilizes autodetection of docker's cgroup driver, as different RPMs for the same distro may vary in that regard.	2017-09-21 11:58:11 +02:00
Matthew Mosesohn	188bae142b	Fix wait for hosts in CI (#1679 ) Also fix usage of failed_when and handling exit code.	2017-09-20 14:30:09 +01:00
Simon Li	7c2b12ebd7	Insert a newline in bastion after ProxyCommand conditional	2017-09-18 16:29:12 +01:00
Matthew Mosesohn	ef8e35e39b	Create admin credential kubeconfig (#1647 ) New files: /etc/kubernetes/admin.conf /root/.kube/config $GITDIR/artifacts/{kubectl,admin.conf} Optional method to download kubectl and admin.conf if kubeconfig_lcoalhost is set to true (default false)	2017-09-18 13:30:57 +01:00
Brad Beam	aaa27d0a34	Adding quotes around parameters in cloud_config (#1664 ) This is to help support escapes and special characters	2017-09-16 08:43:47 +01:00
Kevin Lefevre	9302ce0036	Enhanced OpenStack cloud provider (#1627 ) - Enable Cinder API version for block storage - Enable floating IP for LBaaS	2017-09-16 08:43:24 +01:00
Matthew Mosesohn	8e731337ba	Enable HA deploy of kubeadm (#1658 ) * Enable HA deploy of kubeadm * raise delay to 60s for starting gce hosts	2017-09-15 22:28:15 +01:00
Matthew Mosesohn	b294db5aed	fix apply for netchecker upgrade (#1659 ) * fix apply for netchecker upgrade and graceful upgrade * Speed up daemonset upgrades. Make check wait for ds upgrades.	2017-09-15 13:19:37 +01:00
Brad Beam	f2ae16e71d	Merge pull request #1651 from bradbeam/vaultnocontent Fixing condition where vault CA already exists	2017-09-14 17:04:15 -05:00
Brad Beam	ac281476c8	Prune unnecessary certs from vault setup (#1652 ) * Cleaning up cert checks for vault * Removing all unnecessary etcd certs from each node * Removing all unnecessary kube certs from each node	2017-09-14 12:28:11 +01:00
neith00	1b1c8d31a9	upgrading from weave version 2.0.1 to 2.0.4 This upgrade has been testing offline on a 1.7.5 cluster	2017-09-14 10:29:28 +02:00
Brad Beam	4b587aaf99	Adding ability to specify altnames for vault cert (#1640 )	2017-09-14 07:19:44 +01:00
Kyle Bai	016301508e	Update to Kubernetes v1.7.5 (#1649 )	2017-09-14 07:18:03 +01:00
Matthew Mosesohn	6744726089	kubeadm support (#1631 ) * kubeadm support * move k8s master to a subtask * disable k8s secrets when using kubeadm * fix etcd cert serial var * move simple auth users to master role * make a kubeadm-specific env file for kubelet * add non-ha CI job * change ci boolean vars to json format * fixup * Update create-gce.yml * Update create-gce.yml * Update create-gce.yml	2017-09-13 19:00:51 +01:00
Brad Beam	0a89f88b89	Fixing condition where CA already exists	2017-09-13 03:40:46 +00:00
Brad Beam	69fac8ea58	Merge pull request #1634 from bradbeam/calico_cni fix for calico cni plugin node name	2017-09-11 22:18:06 -05:00
Seungkyu Ahn	e8bde03a50	Setting kubectl bin directory (#1635 )	2017-09-09 23:54:13 +03:00
Matthew Mosesohn	75b13caf0b	Fix kube-apiserver status checks when changing insecure bind addr (#1633 )	2017-09-09 23:41:48 +03:00
Matthew Mosesohn	5d99fa0940	Purge old upgrade hooks and unused tasks (#1641 )	2017-09-09 23:41:20 +03:00
Matthew Mosesohn	649388188b	Fix netchecker update side effect (#1644 ) * Fix netchecker update side effect kubectl apply should only be used on resources created with kubectl apply. To workaround this, we should apply the old manifest before upgrading it. * Update 030_check-network.yml	2017-09-09 23:38:38 +03:00
Matthew Mosesohn	9fa1873a65	Add kube dashboard, enabled by default (#1643 ) * Add kube dashboard, enabled by default Also add rbac role for kube user * Update main.yml	2017-09-09 23:38:03 +03:00

... 5 6 7 8 9 ...

1868 commits