Commit graph

204 commits

Author SHA1 Message Date
timtoum
3e457e4edf Enable weave seed mode for kubespray (#1414)
* Enable weave seed mode for kubespray

* fix task Weave seed | Set peers if existing peers

* fix mac address variabilisation

* fix default values

* fix include seed condition

* change weave var to default values

* fix Set peers if existing peers
2017-07-26 19:09:34 +03:00
AtzeDeVries
e160018826 Fixed conflicts, ipip:true as defualt and added ipip_mode 2017-07-08 14:36:44 +02:00
Kevin Jing Qiu
a742d10c54 Allow calico ipPool to be created with mode "cross-subnet" 2017-07-04 19:05:16 -04:00
AtzeDeVries
61b74f9a5b updated to direct control over ipip 2017-06-23 09:16:05 +02:00
AtzeDeVries
7332679678 Give more control over IPIP, but with same default behaviour 2017-06-20 14:50:08 +02:00
Brad Beam
780308c194 Merge pull request #1174 from jlothian/atomic-docker-restart
Fix docker restart in atomic
2017-06-07 12:05:32 -05:00
Justin Hunthrop
af55e179c7 adding --skip-exists flag for peer_with_router 2017-05-25 14:29:18 -05:00
Josh Lothian
7ae5785447 Removed the other unused handler
With live-restore: true, we don't need a special docker restart
2017-05-19 09:50:10 -05:00
Josh Lothian
ef8d3f684f Remove unused handler
Previous patch removed the step that sets live-restore
back to false, so don't try to notify that handler any more
2017-05-19 09:45:46 -05:00
Josh Lothian
6f67367b57 Leave 'live-restore' false
Leave live-restore false to updates always pick
up new network configuration
2017-05-17 14:31:49 -05:00
Josh Lothian
9ee0600a7f Update handler names and explanation 2017-05-17 14:31:49 -05:00
Josh Lothian
30cc7c847e Reconfigure docker restart behavior on atomic
Before restarting docker, instruct it to kill running
containers when it restarts.

Needs a second docker restart after we restore the original
behavior, otherwise the next time docker is restarted by
an operator, it will unexpectedly bring down all running
containers.
2017-05-17 14:31:49 -05:00
Josh Lothian
a5bb24b886 Fix docker restart in atomic
In atomic, containers are left running when docker is restarted.
When docker is restarted after the flannel config is put in place,
the docker0 interface isn't re-IPed because docker sees the running
containers and won't update the previous config.

This patch kills all the running containers after docker is stopped.
We can't simply `docker stop` the running containers, as they respawn
before we've got a chance to stop the docker daemon, so we need to
use runc to do this after dockerd is stopped.
2017-05-17 14:31:49 -05:00
Sergii Golovatiuk
674b71b535 Ansible 2.3 support
- Fix when clauses in various places
- Update requirements.txt
- Fix README.md

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-26 15:22:10 +02:00
Matthew Mosesohn
e9a294fd9c Significantly reduce memory requirements
Canal runs more pods and upgrades need a bit of extra
room to load new pods in and get the old ones out.
2017-03-27 13:28:37 +03:00
Matthew Mosesohn
e1faeb0f6c Fix weave on RHEL deployment
Reduce retry delay checking weave
Always load br_netfilter module
2017-03-17 18:17:47 +03:00
Aleksandr Didenko
3a39904011 Move calico-policy-controller into separate role
By default Calico CNI does not create any network access policies
or profiles if 'policy' is enabled in CNI config. And without any
policies/profiles network access to/from PODs is blocked.

K8s related policies are created by calico-policy-controller in
such case. So we need to start it as soon as possible, before any
real workloads.

This patch also fixes kube-api port in calico-policy-controller
yaml template.

Closes #1132
2017-03-17 11:21:52 +01:00
Matthew Mosesohn
a422ad0d50 More idempotency fixes
Fixed sync_tokens fact
Fixed sync_certs for k8s tokens fact
Disabled register docker images changability
Fixed CNI dir permission
Fix idempotency for etcd pre upgrade checks
2017-03-15 19:06:39 +03:00
Artem Panchenko
fa05d15093 Allow connections from pods to local endpoints
By default Calico blocks traffic from endpoints
to the host itself by using an iptables DROP
action. It could lead to a situation when service
has one alive endpoint, but pods which run on
the same node can not access it. Changed the action
to RETURN.
2017-03-01 09:21:02 +02:00
Brad Beam
56664b34a6 Lower default memory requests
This is to address out of memory issues on CI as well as help
fit deployments for people starting out with kargo on smaller
machines
2017-02-27 10:53:43 -06:00
Bogdan Dobrelya
712872efba Rework inventory all by real groups' vars
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-02-23 09:43:42 +01:00
Ivan Shvedunov
0006e5ab45 Fix shell special vars 2017-02-21 22:22:40 +03:00
Andrew Greenwood
ca9ea097df Cleanup legacy syntax, spacing, files all to yml
Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
2017-02-17 16:22:34 -05:00
Sergii Golovatiuk
e91e58aec9 Fix fact tags
Ansible playbook fails when tags are limited to "facts,etcd" or to
"facts". This patch allows to run ansible-playbook to gather facts only
that don't require calico/flannel/weave components to be verified. This
allows to run ansible with 'facts,bootstrap-os' or just 'facts' to
gether facts that don't require specific components.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-17 12:32:33 +01:00
Vladimir Rutsky
09847567ae set "check_mode: no" for read-only "shell" steps that registers result
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).

Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
2017-02-13 18:53:41 +03:00
Matthew Mosesohn
6ae70e03cb fixup upgrades for canal and weave 2017-02-10 13:27:41 +03:00
Matthew Mosesohn
29fd957352 Enable weave upgrade from previous versions
Raise readiness probe initial time to 60 (was 30)
2017-02-09 21:39:31 +03:00
Matthew Mosesohn
0a7c6eb9dc Merge pull request #998 from mattymo/fix_upgrade_daemonsets
Fix upgrade for all daemonset type resources
2017-02-09 20:02:21 +03:00
Sergii Golovatiuk
4124d84c00 Lower weave RAM settings.
- Since Weave 1.8.x was rewritten in Golang we may decrease RAM settings
  to continue using g1-small for CI
2017-02-08 18:50:36 +01:00
Matthew Mosesohn
3c713a3f53 Fix upgrade for all daemonset type resources
Daemonsets cannot be simply upgraded through a single API call,
regardless of any kubectl documentation. The resource must be
purged and then recreated in order to make any changes.
2017-02-08 18:16:00 +03:00
Matthew Mosesohn
fd30131dc2 Revert "Drop linux capabilities and rework users/groups" 2017-02-06 15:58:54 +03:00
Bogdan Dobrelya
cae2982d81 Merge pull request #911 from bogdando/DROP_CAPS
Drop linux capabilities and rework users/groups
2017-02-06 12:05:51 +01:00
Sergii Golovatiuk
f2e4ffcac2 Fix weave-net after upgrade to 1.82
- Set recommended CPU settings
- Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
- Limit DS creation to master
- Combined 2 tasks into one with better condition
2017-02-02 10:31:58 +01:00
Matthew Mosesohn
39d87a96aa Rename weave-kube to weave-net
Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
2017-01-31 18:47:27 +03:00
Brad Beam
a11b9d28bd Upgrading weave to weave-kube 2017-01-27 17:05:25 -06:00
Aleksandr Didenko
46c177b982 Switch to ansible_hostname in calico
For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.

Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
2017-01-25 11:49:58 +01:00
Aleksandr Didenko
f05aaeb329 Fix calico-rr peering with k8s masters
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.

Closes #925
2017-01-23 10:19:09 +01:00
Bogdan Dobrelya
cb2e5ac776 Drop linux capabilities and rework users/groups
* Drop linux capabilities for unprivileged containerized
  worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
  components' static manifests, etcd, calico-rr and k8s apps,
  like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
  supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
  networking containers though).
* Grant the kube and netplug users read access for etcd certs via
  the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
  and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
  for control plane.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-20 08:50:42 +01:00
Bogdan Dobrelya
79aeb10431 Merge pull request #858 from bradbeam/calicoctl-canal
Misc updates for canal
2017-01-10 12:24:59 +01:00
Aleksandr Didenko
d9539e0f27 Fix etcd cert generation for calico-rr role
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
2017-01-09 12:06:25 +01:00
Brad Beam
cf042b2a4c Create network policy directory for canal 2017-01-05 10:54:27 -06:00
Brad Beam
65c86377fc Adding calicoctl to canal deployment 2017-01-05 10:54:27 -06:00
Bogdan Dobrelya
5af2c42bde Better fix for different CoreOS os family facts
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-05 16:32:08 +01:00
Bogdan Dobrelya
f7447837c5 Rename CoreOS fact
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-05 14:02:29 +01:00
Bogdan Dobrelya
d8a2941e9e Fix cert paths for flannel/calico policy apps
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-03 16:12:54 +01:00
Bogdan Dobrelya
58062be2a3 Drop non systemd OS types support
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-02 12:14:03 +01:00
Bogdan Dobrelya
a56d9de502 Systemd units, limits, and bin path fixes
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
  systemd limits due to the lack of consensus in the kernel community
  requires out-of-tree kernel patches.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-28 15:49:42 +01:00
Matthew Mosesohn
e7a1949d85 Merge pull request #818 from mattymo/calico-rr-certs
Fix calico-rr to use etcd certs instead of kube certs
2016-12-28 08:47:16 +03:00
Matthew Mosesohn
6d9cd2d720 Fix calico-rr to use etcd certs instead of kube certs 2016-12-27 17:04:50 +03:00
Bogdan Dobrelya
79996b557b Rework ignore_errors to report no reds
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2016-12-27 13:00:50 +01:00