* feat(external-provisioner/local-path-provisioner): adds support for local path provisioner
Helpful for local development but also in production workloads (once the
permission model is worked out) where you have redundancy built into the
software uses the PVCs (e.g. database cluster with synchronous
replication)
* feat(local-path-provisioner): adds debug flag, image tag group var
* fix(local-path-provisioner): moves image repo/tag to download role
* test(gce_centos7-flannel): enables local-path-provisioner in test case
* fix(addons): add image repo/tag to commented default values
* fix(local-path-provisioner): typo in jinja template for local path provisioner
* style(local-path-provisioner): debug flag condition re-formatted
* fix(local-path-provisioner): adds missing default value for debug flag
* fix(local-path-provisioner): syntax fix for debug if condition end
* fix(local-path-provisioner): jinja template syntax: if condition white space
This was already approved in #4106 but there are CI issues
with that PR due to references to kubernetes incubator.
After upgrading to Kubespray 2.8.1 with Kubeadm enabled Rook
Ceph volume provision failed due to the flexvolume plugin dir not
being correct. Adding the var fixed the issue
* Adding ability to maintain existing Encryption Secrets at Rest.
If secrets_encryption.yaml is present it will not be overriten with a new kube_encrypt_token.
This should allow for it to be set ahead of a playbook running or maintain it if cluster.yml is ran on the same cluster and the ansible host does not have access to the secrets.
* Setting existing kube_encrypt_token across all master nodes in case it was missing in one or more nodes.
This fixes an issue where the `nodename` in calico's cni config json can fall out of sync with the k8s node name used by the calico pod if `kube_override_hostname` is set
Currently, the task `container_download | download images for kubeadm config images` fetches etcd image even though it's not required (etcd is bootstrapped by kubespray, not kubeadm).
`kubeadm-images.yaml` is only a subset of `kubeadm-config.yaml`, therefore ``kubeadm config images pull` will try to get all this list (including etcd)
```
# kubeadm config images list --config /etc/kubernetes/kubeadm-images.yaml
k8s.gcr.io/kube-apiserver:v1.13.2
k8s.gcr.io/kube-controller-manager:v1.13.2
k8s.gcr.io/kube-scheduler:v1.13.2
k8s.gcr.io/kube-proxy:v1.13.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.2.24
k8s.gcr.io/coredns:1.2.6
```
When using the `kubeadm-config.yaml` though, it doesn't list etcd image:
```
# kubeadm config images list --config /etc/kubernetes/kubeadm-config.yaml
k8s.gcr.io/kube-apiserver:v1.13.2
k8s.gcr.io/kube-controller-manager:v1.13.2
k8s.gcr.io/kube-scheduler:v1.13.2
k8s.gcr.io/kube-proxy:v1.13.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/coredns:1.2.6
```
This change just adds the etcd endpoints in the `kubeadm-images.yaml` to give a hint to kubeadm it doesn't need etcd image for its boostrapping as etcd is "external".
I confess it is a ugly hack, a better way would be to use a single `kubeadm-config.yaml` for both tasks, but they are triggered by different roles (`kubeadm-images.yaml` is used by download, `kubeadm-config.yaml` by kubernetes/master) at different steps and I didn't want to refactor too many things to prevent breakage.
This is specially useful for offline installation where a whitelist of container images is mirrored on a local private container registry. `k8s.gcr.io/etcd` and `quay.io/coreos/etcd` are two different repositories hosting the same images but using *different tags*!
* coreos/etcd:v3.2.24
* k8s.gcr.io/etcd:3.2.24 (note the missing 'v' in the tag name)
Fix issue where `kubeadm join` could wait forever for joining.
Fix issue where `kubeadm join` were not reaching the user, making
impossible to find the cause of the failure.
New behaviour is to first attempt to join without bypassing the
verifications checks and to display them if needed.
If this fails it still attempts to join by ignoring the check in
order to make previous behavior.
A timeout of 60 seconds is allocated for a joining.
Related-bug: #3973
* bootstrap: rework role
* support being called from a non-root user
* run some commands in check mode
* unify spelling/task names
* bootstrap: fix wording of comments for check_mode: false
* bootstrap: remove setup-pipelining task
* OCI subnet AD 2 is not required for CCM >= 0.7.0
Reorganize OCI provider to generate configuration, rather than pull
Add pull secret option to OCI cloud provider
* Updated oci example to document new parameters
This PR ensures that the e2fsprogs and xfsprogs packages are
installed on all Kubernetes nodes and that the packages are
the latest versions. It also ensures that the nodes can
create XFS filesystems when necessary, since not all distros
install xfsprogs by default.
e2fsprogs - ext2/ext3/ext4 file system utilities
xfsprogs - Utilities for managing the XFS filesystem
* Calico: Ability to define the default IPPool CIDR (instead of kube_pods_subnet)
* Documentation for calico_pool_cidr (and calico_advertise_cluster_ips which has been forgotten...)
* Set cluster DNS correctly in case of nodelocal dns cache
* Pass in cluster_ip based on dns mode
* Disable nodelocaldns by default
* Fix syntax error
* Fix syntax issue
* Add nodelocadns ip to vars of node installation
* Change location of nodelocaldns_ip
* Try to remove newlines from jinja template
* Add debug for config file
* Move parameter logic outside of template
* Adapt templates after feedback
* Remove debugging
Addressing the discussion started in #4064, this PR moves kubeadm and
hyperkube binaries to /usr/local/bin before running them on the master
nodes.
It is to address the case where local_release_dir points to /tmp
(kubespray default) and /tmp is mounted with noexec mode, preventing
any binaries to be run in that partition.
In role "node", we still move kubeadm to bin_dir only on the worker
nodes.
I know this is a bit hack.
If you use cloud LB, you can use kubeadm's controlPlaneEndpoint to configure kube-proxy's server field.
But for nginx-proxy, it didn't start when kubeadm init.
Looks like `epel_enabled` was not configured for the epel install in `bootstrap-centos.yml`. Also, there were no conditionals that would trigger bootstrap for RHEL.
* Use external LB IP for external api endpoint
Use loadbalancer_apiserver.address instead of apiserver_loadbalancer_domain_name for kudadm init --apiserver-advertise-address argument
https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-init/#options states apiserver-advertise-address needs to be a IPv4 or IPv6 address
* only use loadbalancer IP if it is defined
I found a potential use case where `writable` could be null and therfore
not treated like a boolean, so this adds an extra default statement to
avoid negating a non-boolean as boolean which would lead to undefined. refs #4020
Looks like the template is removing the trailing space between storage
class entries, and since CI only has one storage class we never hit this
issue. This change will prevent the yaml from printing on a single line
when multiple storage classes are defined.
In v1beta1 of `ClusterConfiguration` the extraVolumes `writable` field was changed to `readOnly` and its boolean value must be negated.
Also, the json field for `useHyperKubeImage` was incorrectly capitalized.
Right now we're consistently getting warnings about kubelet not found in
path during `kubeadm init`. We fixed this for `kubeadm join` in #3342, and this brings the change to init
as well.
- Fixed an issue where storage class host directories were looped
through excessive target hosts
- Fixes examples in the LVP `README.md` to use nested dicts instead of a
list of dicts
* Makes local volume provisioner more dynamic
* Correct variable name in local storage provisioner defaults
* Updates external-provisioner readme
* Updates variable naming to be more clear, more documentation, fixes sample inventory
* Variable refactor, untangled some jinja2 loops
* Corrects variable name
* No variable substitution in dict keys, replaced with anchor
* Fixes default storage_classes dict, inline docs
* Fixes spelling in inline docs
* Addresses comments in review
* Updates all the defaults
* Fix failing CI task
* Fixes external provisioner daemonset
* allows to override the bind addresses for controller-manager and scheduler
Useful for Prometheus metrics monitoring
* Add bind addr override support in kubeadm/v1beta1
Adds support for override of bind addresses for controller-manager
and scheduler in kubeadm/v1beta1
* Move location of bind address vars
* Remove double declaration of schedulerExtraArgs
The change implemented in #3908 remove line breaks for supplementary
addresses in kubeadm SANs, causing errors in the config file and
failure to bring cluster up. This commit reimplement line breaks in
between supplementary addresses.
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
The containerd service and socket files have been dropped from the
openSUSE docker package so we should not require them in the docker
service anymore. This makes the docker service file look similar to
the one shipped by the openSUSE package.
Signed-off-by: Markos Chandras <mchandras@suse.de>
* controlPlaneEndpoint set up through load balancer should be possible even in single master setups
Enable load balancer for single-master setups
Fixes an issue where single-master setups are not reachable using the usual admin.conf from outside the cluster.
controlPlaneEndpoint set up through load balancer should be possible even in single master setups
* add fix to other api versions
* remove obsolete check completely
* remove check, pass 2
* removes checks in client configuration
* delete 'and'
