Commit graph

346 commits

Author SHA1 Message Date
Dani Comnea
d540560619 Preinstall fails on checking etcd group length (#4839) 2019-06-05 01:37:53 -07:00
Andreas Krüger
797bfd85b0 Only create kubeadm compat cert dir link if it does not exist (#4840) 2019-06-05 01:27:53 -07:00
Sergey Nuzhdin
07cb8ebef7 Add support for arm images for hyperkube, kubeadm and cni_binary (#4261)
* Add support for arm images for hyperkube, kubeadm and cni_binary

* Add dummy etcd checksum for arm

This commit adds dummy etcd checksum for arm to avoid "no attribute" error
during setup.

* Add etcd host assert check

* Add 1.13.4 checksums of kubeadm and hyperkube for arm

* Update checksums of kubeadm and hyperkube for arm

* Add dummy checksums for calicoctl_binary_checksums dict

* disable gather_facts because it causes tests to fail

* Remove architecture check for etcd, due to unable to run tests
2019-06-05 00:05:55 -07:00
Matthew Mosesohn
6347419233 Avoid duplicating nameservers (#4833) 2019-06-04 00:13:02 -07:00
Jacopo Secchiero
5d9946184a Add ignore_assert_errors to "kube-master, ... (#4779)
... kube-node or etcd is empty" task
As a assert must be ignored if ignore_assert_errors is true
2019-05-20 11:25:14 -07:00
MarkusTeufelberger
73c2ff17dd Fix Ansible-lint error [E502] (#4743) 2019-05-16 00:27:43 -07:00
Manuel Cintron
d5c0829d61 Removing unnecessary httplib2 install (#4708) 2019-05-03 17:55:38 -07:00
MarkusTeufelberger
e67f848abc ansible-lint: add spaces around variables [E206] (#4699) 2019-05-02 14:24:21 -07:00
MarkusTeufelberger
88d919337e ansible-lint: don't compare to empty string [E602] (#4665) 2019-04-28 23:00:20 -07:00
MarkusTeufelberger
a65605b17a ansible-lint: Don't use bare variables (#4608)
Circumvented one false positive from ansible-lint
Moved a block of jinja magic into its own variable
2019-04-23 22:20:00 -07:00
MarkusTeufelberger
424e59805f ansible-lint: Fix commands that are also available as module (#4619) 2019-04-23 22:18:00 -07:00
Matthew Mosesohn
09fe95bc60 Avoid creating k8s cert dir on non-k8s nodes (#4602) 2019-04-21 15:27:43 -07:00
Matthew Mosesohn
05dc2b3a09 Use K8s 1.14 and add kubeadm experimental control plane mode (#4514)
* Use K8s 1.14 and add kubeadm experimental control plane mode

This reverts commit d39c273d96.

* Cleanup kubeadm setup run on first master

* pin kubeadm_certificate_key in test

* Remove kubelet autolabel of kube-node, add symlink for pki dir

Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
2019-04-19 06:01:54 -07:00
Maxime Guyot
b218e17f44 ansible-lint: E403 Package installs should not use latest (#4500) 2019-04-18 01:34:08 -07:00
Maxime Guyot
37eac010c8 ansible-lint: Don’t compare to literal True/False (#4499) 2019-04-17 08:42:03 -07:00
Matthew Mosesohn
c5fb734098 Switch calicoctl from a container to a binary (#4524) 2019-04-15 04:24:04 -07:00
Matthew Mosesohn
d39c273d96 Revert "Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)" (#4510)
This reverts commit 316508626d.
2019-04-11 12:52:43 -07:00
Matthew Mosesohn
316508626d Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)
* Use Kubernetes 1.14 and experimental control plane support

* bump to v1.14.0
2019-04-11 05:30:13 -07:00
Neven Miculinic
a30ad1e5a5 Added generic CNI network plugin (#4322)
* Added generic CNI network plugin

* Added CNI network plugin documentation

* added necessary fix
2019-04-10 04:16:15 -07:00
Maxime Guyot
8ad74404c9 Remove bash-completion (#4431) 2019-04-05 01:23:22 -07:00
Maxime Guyot
1ce2f04f47 allow Suse OS family (#4430) 2019-04-04 03:02:51 -07:00
Matthew Mosesohn
5f12b7aedf Remove kubedns and dnsmasq. Move dns_late phase after apps (#4406)
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
2019-04-01 12:32:34 -07:00
Matthew Mosesohn
b7fd462944 Fix support for ansible 2.7.9 (#4375) 2019-03-20 11:29:42 -07:00
Matthew Mosesohn
ec08303f82 Revert "Fix #4237: update kube cert path (#4354)" (#4369)
This reverts commit ea7a6f1cf1.

This change modified the certs dir for Kubernetes, but did not move the directories for existing clusters.
2019-03-20 05:56:57 -07:00
Dmitry Chepurovskiy
ea7a6f1cf1 Fix #4237: update kube cert path (#4354) 2019-03-17 23:55:11 -07:00
Matthew Mosesohn
acbf3db233 Remove hard dependence on facts for all nodes (#4304)
* Remove hard dependence on facts for all nodes

* Update main.yaml

* Update main.yaml
2019-03-05 03:04:39 -08:00
Matthew Mosesohn
adf6a7121f Reenable set_facts task for dns_late (#4312) 2019-03-01 05:39:30 -08:00
hikoz
67832aada9 changed_when:false (#4189) 2019-02-25 20:09:30 -08:00
Gabor Lekeny
b4aaa7b908 Speed up tasks (#4278)
* fact gathering should run only once per node
* eliminate ansible version check, it is at the beginning of each
  playbook
2019-02-25 19:56:23 -08:00
Matthew Mosesohn
b07641c3f3 Move kube_proxy_remove out of set_facts and set default (#4180) 2019-02-25 00:08:06 -08:00
hikoz
e03588f431 use swapon -s (#4216) 2019-02-14 02:35:17 -08:00
Sergey
fbce6349c4 check kube_pods_subnet and kube_service_addresses to valid ip network range, not single ip address (#4188) 2019-02-11 14:12:06 -08:00
Earl C. Ruby III
52e0aa7a80 Install the latest filesystem creation packages (#3904)
This PR ensures that the e2fsprogs and xfsprogs packages are
installed on all Kubernetes nodes and that the packages are
the latest versions. It also ensures that the nodes can
create XFS filesystems when necessary, since not all distros
install xfsprogs by default.

e2fsprogs - ext2/ext3/ext4 file system utilities
xfsprogs - Utilities for managing the XFS filesystem
2019-02-04 12:23:33 -08:00
Sorin Sbarnea
316b73178d Add timeout to Get current version of calico cluster version (#4149)
Avoid waiting forever for this task that should be very quick.

Fixes: #4148
2019-02-01 20:09:04 -08:00
Erwan Miran
7f93a5a0f5 Fix deprecation warnings (#4130)
* use not deprecated ansible_play_hosts variable

* Using tests as filters is deprecated

* Fix deprecation warning about pkg list
2019-01-31 14:57:22 -08:00
Chad Swenson
72802e4d8d Bugfixes for Local Volume Provisioner
- Fixed an issue where storage class host directories were looped
through excessive target hosts
- Fixes examples in the LVP `README.md` to use nested dicts instead of a
list of dicts
2019-01-08 17:45:20 -06:00
Wilmar den Ouden
4fb8adb9e4 More dynamic local-storage-provisioner approach (#3472)
* Makes local volume provisioner more dynamic

* Correct variable name in local storage provisioner defaults

* Updates external-provisioner readme

* Updates variable naming to be more clear, more documentation, fixes sample inventory

* Variable refactor, untangled some jinja2 loops

* Corrects variable name

* No variable substitution in dict keys, replaced with anchor

* Fixes default storage_classes dict, inline docs

* Fixes spelling in inline docs

* Addresses comments in review

* Updates all the defaults

* Fix failing CI task

* Fixes external provisioner daemonset
2019-01-08 12:36:44 -08:00
Gautam Divgi
320f4d4d7f Added filters for integer conversion of kubelet_max_pods and kube_network_node_prefix (#3857) 2018-12-26 13:58:53 -08:00
Ganesh Maharaj Mahalingam
73aee004ac Enable ClearLinux as a distro in kubespray (#3855)
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
2018-12-18 01:39:25 -08:00
Maxim Snezhkov
5e84dabb46 Fix assertion for alone etcd nodes (#3847) 2018-12-12 05:21:54 -08:00
Maxim Snezhkov
90a7941d56 Fix disabling swap on ubuntu systems (#3864) 2018-12-11 02:42:00 -08:00
Andreas Krüger
d5ce5874e8 Streamline path to certs dir (#3836)
* Streamline path to certs dir

* More fixes

* Set path to etcd certs in kubernetes defaults instead
2018-12-06 23:11:53 -08:00
Andreas Krüger
ddffdb63bf Remove non-kubeadm deployment (#3811)
* Remove non-kubeadm deployment

* More cleanup

* More cleanup

* More cleanup

* More cleanup

* Fix gitlab

* Try stop gce first before absent to make the delete process work

* More cleanup

* Fix bug with checking if kubeadm has already run

* Fix bug with checking if kubeadm has already run

* More fixes

* Fix test

* fix

* Fix gitlab checkout untill kubespray 2.8 is on quay

* Fixed

* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path

* Readd secret checking

* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0

* fix typo

* Fix CI jobs to kubeadm again. Fix broken hyperkube path

* Fix gitlab

* Fix rotate tokens

* More fixes

* More fixes

* Fix tokens
2018-12-06 02:33:38 -08:00
Miao Zhou
fefa1670a6 fix calico_version wrong get (#3694)
the ':' makes wrong return of calico_version after the calicoctl downloaded && before the cluster is up
2018-11-12 07:35:21 -08:00
Antoine Legrand
3dcb914607 Remove Vault (#3684)
* Remove Vault

* Remove reference to 'kargo' in the doc

* change check order
2018-11-10 08:51:24 -08:00
RuriRyan
c2710899ed Fixes network restart for Ubuntu Bionic Beaver (#3600)
As Ubuntu Bionic Beaver uses systemd-networkd the step fails
if it tries to restart networking, as it is nonexistent.
2018-11-09 08:13:57 -08:00
Erwan Miran
a6932b6b81 Install ipvsadm when kube_proxy_mode is ipvs (#3548) 2018-11-07 14:04:11 -08:00
Matthew Mosesohn
2ba4e9bda5 Skip most of kubernetes/preinstall role during late DNS config (#3627)
When using resolvconf_mode host_resolvconf, there is an early DNS
config stage where Kubernetes cluster DNS is not injected for host
DNS intially. Later, the cluster DNS is enabled, but we do not
need to run every task from the kubernetes/preinstall role.
2018-11-01 08:08:50 -07:00
Louis
a84508d6b9 remove deprecated parameters of blockinfile module (#3581) 2018-10-30 05:56:58 -07:00
Louis
93104d9224 fix typo 2018-10-24 11:39:15 +08:00