When DNSMasq is configured to read its settings
from a folder ('-7' or '--conf-dir' option) it only
checks that the directory exists and doesn't fail if
it's empty. It could lead to a situation when DNSMasq
is running and handles requests, but not properly
configured, so some of queries can't be resolved.
For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.
Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.
Closes#925
ndots creates overhead as every pod creates 5 concurrent connections
that are forwarded to sky dns. Under some circumstances dnsmasq may
prevent forwarding traffic with "Maximum number of concurrent DNS
queries reached" in the logs.
This patch allows to configure the number of concurrent forwarded DNS
queries "dns-forward-max" as well as "cache-size" leaving the default
values as they were before.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
systemctl daemon-reload should be run before when task modifies/creates
union for etcd. Otherwise etcd won't be able to start
Closes#892
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
be run by limit on each node without regard for order.
The changes make sure that all of the directories needed to do
certificate management are on the master[0] or etcd[0] node regardless
of when the playbook gets run on each node. This allows for separate
ansible playbook runs in parallel that don't have to be synchronized.
the openssl tools will fail to create signing requests because
the CN is too long. This is mainly a problem when FQDNs are used
in the inventory file.
THis will truncate the hostname for the CN field only at the
first dot. This should handle the issue for most cases.
Also remove the check for != "RedHat" when removing the dhclient hook,
as this had also to be done on other distros. Instead, check if the
dhclienthookfile is defined.
the tasks fail because selinux prevents ip-forwarding setting.
Moving the tasks around addresses two issues. Makes sure that
the correct python tools are in place before adjusting of selinux
and makes sure that ipforwarding is toggled after selinux adjustments.
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
Change version for calico images to v1.0.0. Also bump versions for
CNI and policy controller.
Also removing images repo and tag duplication from netchecker role
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
systemd limits due to the lack of consensus in the kernel community
requires out-of-tree kernel patches.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Current design expects users to define at least one
nameserver in the nameservers var to backup host OS DNS config
when the K8s cluster DNS service IP is not available and hosts
still have to resolve external or intranet FQDNs.
Fix undefined nameservers to fallback to the default_resolver.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.
Also bump version of calico/ctl for some bug fixes.
Also place in global vars and do not repeat the kube_*_config_dir
and kube_namespace vars for better code maintainability and UX.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Do not repeat options and nameservers in the dhclient hooks.
Do not prepend nameservers for dhclient but supersede and fail back
to the upstream_dns_resolvers then default_resolver. Fixes order of
nameservers placement, which is cluster DNS ip goes always first.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
The Jinja2 filter 'reverse' returned an iterator instead of a list,
resulting in the umount task to fail.
Intead of using the reverse filter, we use 'tac' to reverse the output
of the previous task.
* For Debian/RedHat OS families (with NetworkManager/dhclient/resolvconf
optionally enabled) prepend /etc/resolv.conf with required nameservers,
options, and supersede domain and search domains via the dhclient/resolvconf
hooks.
* Drop (z)nodnsupdate dhclient hook and re-implement it to complement the
resolvconf -u command, which is distro/cloud provider specific.
Update docs as well.
* Enable network restart to apply and persist changes and simplify handlers
to rely on network restart only. This fixes DNS resolve for hostnet K8s
pods for Red Hat OS family. Skip network restart for canal/calico plugins,
unless https://github.com/projectcalico/felix/issues/1185 fixed.
* Replace linefiles line plus with_items to block mode as it's faster.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
skip_dnsmasq_k8s var as not needed anymore.
* Preconfigure DNS stack early, which may be the case when downloading
artifacts from intranet repositories. Do not configure
K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
not existing).
* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
was set up and before K8s apps to be created.
* Move docker install task to early stage as well and unbind it from the
etcd role's specific install path. Fix external flannel dependency on
docker role handlers. Also fix the docker restart handlers' steps
ordering to match the expected sequence (the socket then the service).
* Add default resolver fact, which is
the cloud provider specific and remove hardcoded GCE resolver.
* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
domains combined with high ndots values lead to poor performance of
DNS stack and make ansible workers to fail very often with the
"Timeout (12s) waiting for privilege escalation prompt:" error.
* Update docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add upload tag allow users to exclude distributing images across nodes
when running with the download tag set.
Add related tags and update docs as well.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
This will allow to use '-e docker_version=1.12' in ansible playbook
execution. It's also backward-compatible and will work with floating
docker_version format in custom yaml files.
Closes#702
The variale etcd_access_addresses is used to determine
how to address communication from other roles to
the etcd cluster.
It was set to the address that ansible uses to
connect to instance ({{ item }})s and not the
the variable:
ip_access
which had already been created and could already
be overridden through the access_ip variable.
This change allows ansible to connect to a machine using
a different address than the one used to access etcd.
Override GCE sysctl in /etc/sysctl.d/99-sysctl.conf instead of
the /etc/sysctl.d/11-gce-network-security.conf. It is recreated
by GCE, f.e. if gcloud CLI invokes some security related changes,
thus losing customizations we want to be persistent.
Update cloud providers firewall requirements in calico docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When running legacy calicoctl we do not specify calico hostname in
calico-node container thus we should not specify it in CNI config.
Also move 'legacy_calicoctl' set_fact task to the top.
In new `calicoctl` version nodes peering with routers is broken.
We need to use predictable node names for calico-node and the
same names in calico `bgpPeer` resources and CNI.
Fixes#655.
This is a teporary solution for long-polling idle connections to
apiserver. It will make Nginx not cut them for the duration of expected
timeout. It will also make Nginx extremely slow in realizing that there
is some issue with connectivity to apiserver as well, so it might not be
perfect permanent solution.
* Add an option to deploy K8s app to test e2e network connectivity
and cluster DNS resolve via Kubedns for nethost/simple pods
(defaults to false).
* Parametrize existing k8s apps templates with kube_namespace and
kube_config_dir instead of hardcode.
* For CoreOS, ensure nameservers from inventory to be put in the
first place to allow hostnet pods connectivity via short names
or FQDN and hostnet agents to pass as well, if netchecker
deployed.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
* Add dns_replicas, dns_memory/cpu_limit/requests vars for
dns related apps.
* When kube_log_level=4, log dnsmasq queries as well.
* Add log level control for skydns (part of kubedns app).
* Add limits/requests vars for dnsmasq (part of kubedns app) and
dnsmasq daemon set.
* Drop string defaults for kube_log_level as it is int and
is defined in the global vars as well.
* Add docs
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When download_run_once with download_localhost is used, docker is
expected to be running on the delegate localhost. That may be not
the case for a non localhost delegate, which is the kube-master
otherwise. Then the dnsmasq role, had it been invoked early before
deployment starts, would fail because of the missing docker dependency.
* Fix that dependency on docker and do not pre download dnsmasq image
for the dnsmasq role, if download_localhost is disabled.
* Remove become: false for docker CLI invocation because that's not
the common pattern to allow users access docker CLI w/o sudo.
* Fix opt bin path hack for localhost delegate to ignore errors when
it fails with "sudo password required" otherwise.
* Describe download_run_once with download_localhost use case in docs
as well.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Use cloud-init config to replace /etc/resolv.conf with the
content for kubelet to properly configure hostnet pods.
Do not use systemd-resolved yet, see
https://coreos.com/os/docs/latest/configuring-dns.html
"Only nss-aware applications can take advantage of the
systemd-resolved cache. Notably, this means that statically
linked Go programs and programs running within Docker/rkt
will use /etc/resolv.conf only, and will not use the
systemd-resolve cache."
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
W/o this patch, the "Download containers" task may be skipped
when running on the delegate node due to wrong "when" confition.
Then it fails to upload nginx image to the nodes as well.
Fix download nginx dependency so it always can be pushed to
nodes when download_run_once is enabled.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When setting permission for containers download/upload dir we're
using `ansible_ssh_user`. But if playbook is executed without
user being explicitly set `ansible_ssh_user` may be undefined.
In such situations dir ownership will default to `ansible_user_id`
Closes: #644
According to http://kubernetes.io/docs/user-guide/images/ :
By default, the kubelet will try to pull each image from the
specified registry. However, if the imagePullPolicy property
of the container is set to IfNotPresent or Never, then a local\
image is used (preferentially or exclusively, respectively).
Use IfNotPresent value to allow images prepared by the download
role dependencies to be effectively used by kubelet without pull
errors resulting apps to stay blocked in PullBackOff/Error state
even when there are images on the localhost exist.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Pre download all required container images as roles' deps.
Drop unused flannel-server-helper images pre download.
Improve pods creation post-install test pre downloaded busybox.
Improve logs collection script with kubectl describe, fix sudo/etcd/weave
commands.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Fix unreliable waiting for the apiserver to become ready.
Remove logfile mount to align with the rest of static pods
and because containers shall write logs to stdout only.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
in the etcd handler, the reload etcd action
was called after ansible waits for etcd to be
up, this means that the health checks which are
called immediately after fail (resulting in the etcd
role always failing and never finishing)
This patch changes the order to move the 'wait for etcd
up' resource after the 'reload etcd resource', ensuring that
the service is up before the health check is called.
* Add download_localhost for the download_run_once mode, which is
use the ansible host (a travis node for CI case) to store and
distribute containers across cluster nodes in inventory.
Defaults to false.
* Rework download_run_once logic to fix idempotency of uploading
containers.
* For Travis CI, enable docker images caching and run Travis
workers with sudo enabled as a dependency
* For Travis CI, deploy with download_localhost and download_run_once
enabled to shourten dev path drastically.
* Add compression for saved container images. Defaults to 'best'.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Aleksandr Didenko <adidenko@mirantis.com>
Add one more step (task) to containers download/upload sequence -
copy saved .tar containers to ansible host (delegate_to: localhost).
Then upload images to target nodes. It uses synchronize module so
if ansible host (localhost) is the same host as kube-master[0] then
new task causes no issues and the copy to localhost process is
basically skipped.
- Move CNI configuration from `kubernetes/node` role to
`network_plugin/canal`
- Create SSL dir for Canal and symlink etcd SSL files
- Add needed options to `canal-config` configmap
- Run flannel and calico-node containers with proper configuration
Since version 'v1.0.0-beta' calicoctl is written
in Go and its API differs from old Python based
utility. Added support of both old and new version
of the utility.
- Drop debugs from collect-info playbook
- Drop sudo from collect-info step and add target dir var (required for travis jobs)
- Label all k8s apps, including static manifests
- Add logs for K8s apps to be collected as well
- Fix upload to GCS as a public-read tarball
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
'etcd_cert_dir' variable is missing from 'kubernetes-apps/ansible'
role which breaks Calico policy controller deployment.
Also fixing calico-policy-controller.yml.
Related bug: https://github.com/ansible/ansible/issues/15405
Uses tar and register because synchronize module cannot sudo on the
remote side correctly and copy is too slow.
This patch dramatically cuts down the number of tasks to process
for cert synchronization.
* Don't push containers if not changed
* Do preinstall role only once and redistribute defaults to
corresponding roles
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
