Commit graph

455 commits

Author SHA1 Message Date
Antoine Legrand
26e3142c95 Merge branch 'master' into standalone_kubelet 2016-12-13 17:26:21 +01:00
Alexander Block
665ce82d71 Move kube_version to group_vars/all to allow easier changing of version
Also allows to perform version dependent logic in Ansible roles.
2016-12-13 17:21:00 +01:00
Alexander Block
444b1dafdc Pass --anonymous-auth to apiserver
Fixes #732
2016-12-13 17:06:53 +01:00
Bogdan Dobrelya
c75f394707 Address standalone kubelet config case
Also place in global vars and do not repeat the kube_*_config_dir
and kube_namespace vars for better code maintainability and UX.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-13 16:35:53 +01:00
Alexander Block
4e34803b1e Disable fastestmirror on CentOS
It actually slows down things dramatically when used in combination
with Ansible.
2016-12-12 09:54:39 +01:00
Bogdan Dobrelya
2c50f20429 Merge pull request #696 from bogdando/intranet_dns
Preconfigure dns stack early
2016-12-09 21:46:03 +01:00
Bogdan Dobrelya
a15d626771 Preconfigure DNS stack and docker early
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
  skip_dnsmasq_k8s var as not needed anymore.

* Preconfigure DNS stack early, which may be the case when downloading
  artifacts from intranet repositories. Do not configure
  K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
  not existing).

* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
  was set up and before K8s apps to be created.

* Move docker install task to early stage as well and unbind it from the
  etcd role's specific install path. Fix external flannel dependency on
  docker role handlers. Also fix the docker restart handlers' steps
  ordering to match the expected sequence (the socket then the service).

* Add default resolver fact, which is
  the cloud provider specific and remove hardcoded GCE resolver.

* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
  domains combined with high ndots values lead to poor performance of
  DNS stack and make ansible workers to fail very often with the
  "Timeout (12s) waiting for privilege escalation prompt:" error.

* Update docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-09 17:30:55 +01:00
Alexander Block
c3ec3ff902 Allow to specify docker storage driver 2016-12-09 13:56:56 +01:00
Chad Swenson
8b5b27bb51 Docker Options Refactor 2016-12-02 15:07:51 -06:00
Sebastian Melchior
bb55f68f95 add basic azure support for kargo 2016-11-29 10:20:28 +01:00
Bogdan Dobrelya
b7692fad09 Add advanced net check for DNS K8s app
* Add an option to deploy K8s app to test e2e network connectivity
  and cluster DNS resolve via Kubedns for nethost/simple pods
  (defaults to false).
* Parametrize existing k8s apps templates with kube_namespace and
  kube_config_dir instead of hardcode.
* For CoreOS, ensure nameservers from inventory to be put in the
  first place to allow hostnet pods connectivity via short names
  or FQDN and hostnet agents to pass as well, if netchecker
  deployed.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-11-28 13:23:25 +01:00
Bogdan Dobrelya
dff78f616e Allow pre-downloaded images to be used effectively
According to http://kubernetes.io/docs/user-guide/images/ :
By default, the kubelet will try to pull each image from the
specified registry. However, if the imagePullPolicy property
of the container is set to IfNotPresent or Never, then a local\
image is used (preferentially or exclusively, respectively).

Use IfNotPresent value to allow images prepared by the download
role dependencies to be effectively used by kubelet without pull
errors resulting apps to stay blocked in PullBackOff/Error state
even when there are images on the localhost exist.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-11-22 16:16:04 +01:00
ant31
9872ed4bb2 Merge branch 'master' of github.com:kubespray/kargo 2016-11-17 14:32:14 +01:00
Spencer Smith
cb47bbf753 update comment with valid options for bootstrap_os 2016-11-14 16:31:15 -05:00
Matthew Mosesohn
95b460ae94 Remove etcd-proxy from all nodes and use etcd multiaccess 2016-11-09 13:31:12 +03:00
ant31
5aa8df163e Merge branch 'master' of github.com:kubespray/kargo 2016-11-07 12:05:36 +01:00
ant31
881dc8172c update example 2016-11-07 12:03:55 +01:00
Smana
056f4b6c00 upgrade to kubernetes version 1.4.0
test to change the machine type

Revert "test to change the machine type"

This reverts commit 7a91f1b5405a39bee6cb91940b09a0b0f9d3aee1.

use google dns server when no upstream dns are defined

comment upstream_dns_servers

update documentation

remove deprecated kubelet flags

Revert "remove deprecated kubelet flags"

This reverts commit 21e3b893c896d0291c36a07d0414f4cb88b8d8ac.
2016-10-10 22:44:47 +02:00
Matthew Mosesohn
84052ff0b6 use nginx proxy on non-master nodes to proxy apiserver traffic
Also adds all masters by hostname and localhost/127.0.0.1 to
apiserver SSL certificate.

Includes documentation update on how localhost loadbalancer works.
2016-10-05 20:09:10 +03:00
Bogdan Dobrelya
5fd43b7cf0 Allow subdomains of dns_domain and fix kubelet restarts
* Add a var for ndots (default 5) and put it hosts' /etc/resolv.conf.
* Poke kube dns container image to v1.7
* In order to apply changes to kubelet, notify it to
be restarted on changes made to /etc/resolv.conf. Ignore errors as the kubelet
may yet to be present up to the moment of the notification being processed.
* Remove unnecessary kubelet restart for master role as the node role ensures
it is up and running. Notify master static pods waiters for apiserver,
scheduler, controller-manager instead.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-27 14:32:49 +02:00
Bogdan Dobrelya
82ee60fe8b Make dnsmasq daemon set optional
Change additional dnsmasq opts:
- Adjust caching size and TTL
- Disable resolve conf to not create loops
- Change dnsPolicy to default (similarly to kubedns's dnsmasq). The
  ClusterFirst should not be used to not create loops
- Disable negative NXDOMAIN replies to be cached
- Make its very installation as optional step (enabled by default).
  If you don't want more than 3 DNS servers, including 1 for K8s, disable
  it.
- Add docs and a drawing to clarify DNS setup.
- Fix stdout logs for dnsmasq/kubedns app configs
- Add missed notifies to resolvconf -u handler
- Fix idempotency of resolvconf head file changes

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-23 12:59:06 +02:00
Bogdan Dobrelya
390764c2b4 Add retry_stagger var for failed download/pushes.
* Add the retry_stagger var to tweak push and retry time strategies.
* Add large deployments related docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-15 16:43:58 +02:00
Antoine Legrand
2e386dfbdc Merge pull request #465 from kubespray/freeze_kpm_version
Multiple app deploy tools
2016-09-08 22:01:52 +02:00
Antoine Legrand
ccbb2ee3ae App deployer plugins 2016-09-08 15:01:57 +02:00
Brandon B. Jozsa
2606e8e1c8 combine bootstrap options, add xenial support 2016-09-06 10:04:41 -04:00
Bogdan Dobrelya
731d32afda Add HA/LB endpoints for kube-apiserver
* Add HA docs for API server.
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Use facts for kube_apiserver to not repeat code and enable LB endpoints use.
* Use /healthz check for the wait-for apiserver.
* Use the single endpoint for kubelet instead of the list of apiservers
* Specify kube_apiserver_count to for HA layout

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-07-25 17:25:45 +02:00
Matthew Mosesohn
7f212ca9cb Revert "Add HA/LB endpoints for kube-apiserver"
This reverts commit a70c3b661e.
2016-07-22 13:54:38 +03:00
Bogdan Dobrelya
a70c3b661e Add HA/LB endpoints for kube-apiserver
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Add loadbalancer_apiserver_localhost (default false). If enabled, override
the external LB and expect localhost:443/8080 to be new internal only frontends.
* Add kube_apiserver_multiaccess to ignore loadbalancers, and make clients
to access the apiservers as a comma-separated list of access_ip/ip/ansible ip
(a default mode). When disabled, allow clients to use the given loadbalancers.
* Define connections security mode for kube controllers, schedulers, proxies.
It is insecure be default, which is the current deployment choice.
* Rework the groups['kube-master'][0] hardcode defining the apiserver
endpoints.
* Improve grouping of vars and add facts for kube_apiserver.
* Define kube_apiserver_insecure_bind_address as a fact, add more
facts for ease of use.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-07-21 11:05:03 +02:00
Bogdan Dobrelya
32cd6e99b2 Add etcd proxy support
* Enforce a etcd-proxy role to a k8s-cluster group members. This
provides an HA layout for all of the k8s cluster internal clients.
* Proxies to be run on each node in the group as a separate etcd
instances with a readwrite proxy mode and listen the given endpoint,
which is either the access_ip:2379 or the localhost:2379.
* A notion for the 'kube_etcd_multiaccess' is: ignore endpoints and
loadbalancers and use the etcd members IPs as a comma-separated
list. Otherwise, clients shall use the local endpoint provided by a
etcd-proxy instances on each etcd node. A Netwroking plugins always
use that access mode.
* Fix apiserver's etcd servers args to use the etcd_access_endpoint.
* Fix networking plugins flannel/calico to use the etcd_endpoint.
* Fix name env var for non masters to be set as well.
* Fix etcd_client_url was not used anywhere and other etcd_* facts
evaluation was duplicated in a few places.
* Define proxy modes only in the env file, if not a master. Del
an automatic proxy mode decisions for etcd nodes in init/unit scripts.
* Use Wants= instead of Requires= as "This is the recommended way to
hook start-up of one unit to the start-up of another unit"
* Make apiserver/calico Wants= etcd-proxy to keep it always up

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>
2016-07-19 14:09:40 +02:00
ant31
eb6025a184 Add kubedns as default package to install 2016-06-12 18:08:53 +02:00
Paul Czarkowski
67147cf435 example env allow insecure-registry
Many use cases of k8s involve running a local
registry, chances are the person running this
will learn the hard way that they need to allow
insecure registry on the `kube_service_addresses`
network.

We should just default to settings this in
`inventory/group_vars/all.yml` to help reduce
potential friction for first time users.
2016-05-28 11:56:16 -05:00
Spencer Smith
87757d4fcf provides initial docker options support 2016-05-25 12:56:45 -04:00
David Reuss
0984b23f0e Use correct google ns for dns upstream 2016-05-17 13:19:13 +02:00
Spencer Smith
adceaf60e1 support proxies with docker on rhel 2016-05-10 15:49:27 -07:00
Paul Czarkowski
8f4e879ca7 Add native Vagrant support
This allows you to simply run `vagrant up` to get a 3 node HA cluster.

* Creates a dynamic inventory and uses the inventory/group_vars/all.yml
* commented lines in inventory.example so that ansible doesn't try to use it.
* added requirements.txt to give easy way to install ansible/ipaddr
* added gitignore files to stop attempts to save unwated files
* changed `Check if kube-system exists` to `failed_when: false` instead of
`ignore_errors`
2016-05-08 10:17:11 -05:00
Smana
bd6c12d686 fix api auth issue for ci tests 2016-05-05 09:00:02 +02:00
Smana
59d71740b1 use a variable for api's 'root' password 2016-05-04 16:49:25 +02:00
teuto.net Netzdienste GmbH
9f8da6c225 Implemented cloud-provider integration for OpenStack.
Currently kubespray does not install kubernetes in a way that allows cinder volumes to be used. This commit provides the necessary cloud configuration file and configures kubelet and kube-apiserver to use it.
2016-03-29 15:17:22 +02:00
Smaine Kahlouch
68fafd030d choose between gce and aws cloud providers 2016-03-23 17:27:06 +01:00
ant31
6297e5ea93 Use dnsmasq inside pods 2016-03-19 23:41:27 +01:00
Smana
cd38ecc378 redirecting to new doc page 2016-03-07 16:15:40 +01:00
Smana
fca384e24c first version of CoreOS on GCE
Please enter the commit message for your changes. Lines starting
2016-02-21 00:06:36 +01:00
Smana
793d665db4 specify weave version 2016-02-10 18:19:03 +01:00
Smaine Kahlouch
4f92417a5d split network plugins into distinct roles 2016-02-09 11:42:00 +01:00
Greg Althaus
bedcca922c Add variables and defaults for multiple types of ip addresses.
Each node can have 3 IPs.
1. ansible_default_ip4 - whatever ansible things is the first IPv4 address
   usually with the default gw.
2. ip - An address to use on the local node to bind listeners and do local
   communication.  For example, Vagrant boxes have a first address that is the
   NAT bridge and is common for all nodes.  The second address/interface should
   be used.
3. access_ip - An address to use for node-to-node access.  This is assumed to
   be used by other nodes to access the node and may not be actually assigned
   on the node.  For example, AWS public ip that is not assigned to node.

This updates the places addresses are used to use either ip or access_ip and walk
up the list to find an address.
2016-01-27 16:05:39 -06:00
Smaine Kahlouch
5edc81c627 moving kube-cert group into group_vars 2016-01-22 17:18:45 +01:00
Antoine Legrand
078b67c50f Remove downloader host 2016-01-22 09:59:39 +01:00
ant31
9a03249446 Add travis tests 2016-01-05 12:31:49 +01:00
Smaine Kahlouch
2a08f7bc0a inventory example, localhost for downloader 2016-01-04 14:54:30 +01:00
Smaine Kahlouch
392570f4ff distinct local hostname 2015-12-31 14:54:51 +01:00
Smaine Kahlouch
98fe2c02b2 review local tasks 2015-12-31 10:28:47 +01:00
Smaine Kahlouch
4388cab8d6 Use second ip address in order to avoid any ip range problem 2015-12-24 13:58:04 +01:00
Smaine Kahlouch
03d402e226 using hostnames in the inventory is more readable 2015-12-18 16:13:42 +01:00
Smaine Kahlouch
0a238d9853 Specify etcd servers for the etcd cluster 2015-12-18 14:31:51 +01:00
Antoine Legrand
a003d91576 simplify inventory path 2015-12-17 21:32:06 +01:00