Commit graph

269 commits

Author SHA1 Message Date
Maxime Guyot
648fcf3a2e
Fix E306 in roles/etcd (#6515) 2020-08-31 03:20:20 -07:00
Barry Melbourne
058438a25d
Remove support for CoreOS Container Linux (#6576) 2020-08-28 02:28:53 -07:00
Florian Ruynat
706c7cb4f1
etcd should not fail when adding an already existing member (#6587) 2020-08-27 02:33:01 -07:00
Maxime Guyot
e70f27dd79
Add noqa and disable .ansible-lint global exclusions (#6410) 2020-07-27 06:24:17 -07:00
chenguoquan1024
9c48f666ec
change /etc/ssl/etcd to etcd_config_dir param (#6408)
* change /etc/ssl/etcd to etcd_config_dir param

* add use etcd_events_data_dir param
2020-07-21 23:58:05 -07:00
Florent Monbillard
bf8c8976dd
Upgrade etcd to 3.4.3 (#5998) 2020-07-20 07:26:51 -07:00
Maxime Guyot
00fe3d5094
Explicitly set ETCDCTL_API and use ETCDCTL_ENDPOINTS (#6327) 2020-07-01 04:56:16 -07:00
Joel Seguillon
4c1e0b188d
Add .editorconfig file (#6307) 2020-06-29 12:39:59 -07:00
Andrew DeMaria
af1c93cdfc
Add option to expose metrics on separate port (#6092) 2020-05-10 12:21:51 -07:00
Etienne Champetier
a35b6dc1af
Fix scaling (#5889)
* etcd: etcd-events doesn't depend on etcd_cluster_setup

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

* etcd: remove condition already present on include_tasks

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

* etcd: fix scaling up

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

* etcd: use *access_addresses, do not delegate to etcd[0]

We want to wait for the full cluster to be healthy,
so use all the cluster addresses
Also we should be able to run the playbook when etcd[0] is down
(not tested), so do not delegate to etcd[0]

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

* etcd: use failed_when for health check

unhealthy cluster is expected on first run, so use failed_when
instead of ignore_errors to remove scary red messages

Also use run_once

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

* kubernetes/preinstall: ensure ansible_fqdn is up to date after changing /etc/hosts

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

* kubernetes/master: regenerate apiserver cert if needed

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2020-04-08 01:27:43 -07:00
Xiaodu
63fa406c3c
Move host_architecture to kubespray-defaults (#5811)
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
2020-03-25 12:58:25 -07:00
Etienne Champetier
6ad6609872
Fix certificates checking when adding etcd node to existing k8s node (#5807)
Co-authored-by: alexkomrakov <alexkomrakov@gmail.com>
2020-03-25 12:46:25 -07:00
Stephen Schmidt
0379a52f03
Fix etcd install with docker and etcd_kubeadm_enabled (#5777)
- This solves issue #5721 & #5713 (dupes)
  - Provide a cleaner default usage pattern for the download role
    around etcd that supports 'host' and 'docker' properly
  - Extract the 'etcdctl' as a separate task install piece and reuse it where
    appropriate
  - Update the kubeadm-etcd task to reflect the above change
2020-03-24 08:12:47 -07:00
spaced
8ce5a9dd19
remove atomic support because reached end of live (#5783) 2020-03-17 14:31:27 -07:00
spaced
876d4de6be
Fedora CoreOS support (#5657)
* fedora coreos support
- bootstrap and new fact for

* fedora coreos support
- fix bootstrap condition

* fedora coreos support
- allow customize packages for fedora coreos bootstrap

* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos

* fedora coreos support
- handle all ostree like os in same way

* fedora coreos support
- handle all ostree like os in same way for crio

* fedora coreos support
- add fcos documentations
2020-03-17 03:12:21 -07:00
Jakub Husák
2beffe688a
Make etcdctl connect to localhost out of the box (#5643)
* Make etcdctl connect to localhost out of the box

* etcdctl envs: use admin-.pem instead of member-.pem
2020-03-06 02:05:23 -08:00
Sylvain Chateau
0ca7aa126b
added "Flatcar", "Flatcar Container Linux by Kinvolk" for all coreOS role (#5607) 2020-02-18 00:15:29 -08:00
Erwan Miran
339e36fbe6
Files to archive can be passed directly (#5571) 2020-02-12 07:50:51 -08:00
qvicksilver
ac2135e450
Fix recover-control-plane to work with etcd 3.3.x and add CI (#5500)
* Fix recover-control-plane to work with etcd 3.3.x and add CI

* Set default values for testcase

* Add actual test jobs

* Attempt to satisty gitlab ci linter

* Fix ansible targets

* Set etcd_member_name as stated in the docs...

* Recovering from 0 masters is not supported yet

* Add other master to broken_kube-master group as well

* Increase number of retries to see if etcd needs more time to heal

* Make number of retries for ETCD loops configurable, increase it for recovery CI and document it
2020-02-11 01:38:01 -08:00
Erwan Miran
303c3654a1 Set pipefail in case tar fails (#5506) 2020-01-06 02:25:34 -08:00
Maxime Guyot
b15d41a96a Add support to Ansible 2.9 (#5361) 2019-12-05 07:24:32 -08:00
Sergey
932935ecc7 fix wrong path in include install_host.yml in etcd role (#5256) 2019-10-13 18:16:34 -07:00
Matthew Mosesohn
7abf6a6958 Allow etcd member join by checking cluster health only on first etcd (#5032)
Change-Id: I9cc01cef3a437893225e2d9f58495826bbce7be9
2019-08-07 04:44:50 -07:00
Matthew Mosesohn
4348e78b24 Enable kubeadm etcd mode (#4818)
* Enable kubeadm etcd mode

Uses cert commands from kubeadm experimental control plane to
enable non-master nodes to obtain etcd certs.

Related story: PROD-29434

Change-Id: Idafa1d223e5c6ceadf819b6f9c06adf4c4f74178

* Add validation checks and exclude calico kdd mode

Change-Id: Ic234f5e71261d33191376e70d438f9f6d35f358c

* Move etcd mode test to ubuntu flannel HA job

Change-Id: I9af6fd80a1bbb1692ab10d6da095eb368f6bc732

* rename etcd_mode to etcd_kubeadm_enabled

Change-Id: Ib196d6c8a52f48cae370b026f7687ff9ca69c172
2019-06-20 11:12:51 -07:00
MarkusTeufelberger
73c2ff17dd Fix Ansible-lint error [E502] (#4743) 2019-05-16 00:27:43 -07:00
MarkusTeufelberger
e67f848abc ansible-lint: add spaces around variables [E206] (#4699) 2019-05-02 14:24:21 -07:00
Stas
50bdaa573c Apply etcd_extra_vars to etcd-events.env as well. (#4219)
This change ensures that etcd_extra_vars variable applies
to events etcd as well.
2019-05-02 12:24:27 -07:00
Christoffer Anselm
dcd9c9509b Add etcd role dependency on kube user to avoid etcd role failure when running scale.yml with a fresh node. (#3240) (#4479) 2019-04-30 04:01:36 -07:00
Andreas Krüger
38af93b60c Remove rkt support (#4671) 2019-04-29 01:14:20 -07:00
gitareest
6ca2019002 Fix issue with etcd arm host installation case (#4589)
Use host_architecture variable.
2019-04-25 04:58:47 -07:00
Attilio Greco
6243467856 remove duble check for run this task just one time (#4613) 2019-04-24 05:38:01 -07:00
Matthew Mosesohn
fc072300ea Purge legacy cleanup tasks from older than 1 year (#4450)
We don't need to support upgrades from 2 year old installs,
just from the last major version.

Also changed most retried tasks to 1s delay instead of longer.
2019-04-24 00:08:05 -07:00
MarkusTeufelberger
a65605b17a ansible-lint: Don't use bare variables (#4608)
Circumvented one false positive from ansible-lint
Moved a block of jinja magic into its own variable
2019-04-23 22:20:00 -07:00
MarkusTeufelberger
424e59805f ansible-lint: Fix commands that are also available as module (#4619) 2019-04-23 22:18:00 -07:00
Qasim Sarfraz
0a3cf1a087 Fix CA cert environment variable for ectd v3 (#4381) 2019-03-28 00:18:43 -07:00
Matthew Mosesohn
acbf3db233 Remove hard dependence on facts for all nodes (#4304)
* Remove hard dependence on facts for all nodes

* Update main.yaml

* Update main.yaml
2019-03-05 03:04:39 -08:00
Ganesh Maharaj Mahalingam
73aee004ac Enable ClearLinux as a distro in kubespray (#3855)
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
2018-12-18 01:39:25 -08:00
Andrey Zhelnin
1712314fab Setting host_architecture var (#3846)
Setting host_architecture to allow etcd upgrade working through: ansible-playbook -b -i inventory/sample/hosts.ini cluster.yml --tags=etcd (on other case host_architecture is missing)
2018-12-07 05:41:30 -08:00
Chad Swenson
145687a48e Reduce log spam of verbose tasks (#3806)
Added a loop_control label to a few tasks that flood our logs.
2018-12-04 10:35:44 -08:00
Zohar Mamedov
af5e05d08d etcd_log_package_levels for /etc/etcd.env (#3700) 2018-11-16 23:59:40 -08:00
Antoine Legrand
3dcb914607 Remove Vault (#3684)
* Remove Vault

* Remove reference to 'kargo' in the doc

* change check order
2018-11-10 08:51:24 -08:00
Bily Zhang
b2b421840c Fix some typos (#3690)
Signed-off-by: mooncake <xcoder@tenxcloud.com>
2018-11-10 15:53:58 +01:00
ankitcharolia
9c83551a0e add certificate authority file (#3433) 2018-11-02 08:27:53 -07:00
Matthew Mosesohn
bc74a37696 Calculate etcd client cert serial for appropriate groups (#3605)
Standalone etcd nodes do not generate node-$hostname certs and do
not need this serial calculated.
2018-11-01 05:50:26 -07:00
Bart Laarhoven
0acb823d96 Distribute node etcd certificates like it's done in kubernetes/secrets (#3486)
* do it like in kubernetes/secrets

* fix indentation

* processed comments

* missed one, sorry

* trailing space fix
2018-10-29 11:45:32 +01:00
Erwan Miran
b4e2b85745 Replace shell with command in order to allow the task to fail when openssl x509 does return zero (#3516) 2018-10-15 23:48:12 -07:00
Erwan Miran
fcd8d850dc Fix ansible syntax to avoid ansible warnings (again) (#3509)
* Fix ansible syntax to avoid ansible warnings (again)

* warn: false on tar -cfz

* wrong placement of warn:false
2018-10-15 23:47:04 -07:00
Erwan Miran
2ab2f3a0a3 Ability to define SSL certificates duration and SSL key size (#3482)
* Ability to specify ssl certificate duration and ssl key size - etcd/secrets

* Ability to specify ssl certificate duration and ssl key size - helm/contiv + fix contiv missing copy certs generation script
2018-10-09 04:43:30 -07:00
刘旭
145e5c8943 use copy and slurp module (#3313) 2018-09-27 02:12:02 -07:00
rongzhang
84c4c7dc82 Use synchronize module 2018-09-16 20:36:44 +08:00