Spencer Smith
017a813621
first cut of an upgrade process
2017-02-14 18:51:13 +03:00
Brad Beam
4c891b8bb0
Adding support for proxy w/ rkt kubelet
2017-02-14 08:09:49 -06:00
Matthew Mosesohn
948d9bdadb
Merge pull request #1019 from mattymo/issue1011
...
Update calico to v1.0.2
2017-02-14 14:01:25 +03:00
Matthew Mosesohn
b7258ec3bb
Merge pull request #1013 from mattymo/remove_masqerade_all
...
Disable kube_proxy_masquerade_all
2017-02-14 14:00:29 +03:00
Antoine Legrand
f4f730bd8a
Merge pull request #1025 from holser/bug/961
...
Install pip on Ubuntu
2017-02-14 10:31:42 +01:00
Matthew Mosesohn
f5e27f1a21
Merge pull request #1021 from holser/remove_deprecated
...
Replace always_run with check_mode
2017-02-14 11:25:58 +03:00
Matthew Mosesohn
bb6415ddc4
Merge pull request #1015 from holser/rkt_ssl_ca_dirs
...
Set ssl_ca_dirs for rkt based on fact
2017-02-14 11:25:17 +03:00
Sergii Golovatiuk
2b6179841b
Install pip on Ubuntu
...
- Refactor 'Check if bootstrap is needed' as ansible loop. This allows
to add new elements easily without refactoring. Add pip to the list.
- Refactor 'Install python 2.x' task to run once if any of rc
codes != 0. Actually, need_bootstrap is array of hashes, so map will
allow to get single array of rc statuses. So if status is not zero it
will be sorted and the last element will be get, converted to bool.
Closes : #961
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 19:35:13 +01:00
Antoine Legrand
e877cd2874
Merge pull request #1024 from holser/bug/961
...
Install pip on Ubuntu
2017-02-13 17:53:57 +01:00
Vladimir Rutsky
09847567ae
set "check_mode: no" for read-only "shell" steps that registers result
...
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).
Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
2017-02-13 18:53:41 +03:00
Sergii Golovatiuk
732ae69d22
Install pip on Ubuntu
...
Closes : #961
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 16:27:09 +01:00
Matthew Mosesohn
b5be335db3
Clean up dnsmasq purge task
2017-02-13 17:30:15 +03:00
Sergii Golovatiuk
5f4cc3e1de
Replace always_run with check_mode
...
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
2017-02-13 15:00:56 +01:00
Matthew Mosesohn
ec567bd53c
Update calico to v1.0.2
...
Also calico-cni to v1.5.6, calico-policy to v0.5.2
Fixes : #1011
2017-02-13 15:39:25 +03:00
Sergii Golovatiuk
aeadaa1184
Set ssl_ca_dirs for rkt based on fact
...
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.
Closes : #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 13:28:29 +01:00
Matthew Mosesohn
2f0f0006e3
Merge pull request #988 from mattymo/feat/rolling3
...
Add CI cases for testing upgrade from v2.0.1 release
2017-02-10 18:09:43 +03:00
Matthew Mosesohn
de047a2b8c
Merge pull request #983 from vwfs/centos_kernel_upgrade
...
Add kernel upgrade for CentOS
2017-02-10 14:40:27 +03:00
Antoine Legrand
86a35652bb
Merge pull request #1009 from mattymo/dnsmasq_updates
...
Enable reset of dnsmasq if manifest or config changes
2017-02-10 11:43:09 +01:00
Matthew Mosesohn
6ae70e03cb
fixup upgrades for canal and weave
2017-02-10 13:27:41 +03:00
Matthew Mosesohn
2c532cb74d
Disable kube_proxy_masquerade_all
...
Fixes #1012
2017-02-10 13:16:39 +03:00
Bogdan Dobrelya
89ae9f1f88
Merge pull request #1002 from code0x9/master
...
use ansible sysctl module for config ip forwarding
2017-02-10 10:40:18 +01:00
Alexander Block
d2e010cbe1
Add kernel upgrade for CentOS
2017-02-10 09:29:12 +01:00
Matthew Mosesohn
a44a0990f5
Enable reset of dnsmasq if manifest or config changes
2017-02-10 10:40:07 +04:00
Matthew Mosesohn
2f88c9eefe
Merge pull request #989 from holser/kubelet_remedy
...
Kubernetes Reliability Improvements
2017-02-10 09:29:29 +03:00
Matthew Mosesohn
60f1936a62
Merge pull request #1004 from galthaus/kubelet-load-modules
...
Allow kubelet to load kernel modules
2017-02-10 09:28:16 +03:00
Sergii Golovatiuk
c07d60bc90
Kubernetes Reliability Improvements
...
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
node-monitor-period, pod-eviction-timeout for Kubernetes controller
manager
- Add Kubernetes Relaibility Documentation with recomendations for
various scenarios.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-09 23:54:08 +01:00
Matthew Mosesohn
29fd957352
Enable weave upgrade from previous versions
...
Raise readiness probe initial time to 60 (was 30)
2017-02-09 21:39:31 +03:00
Matthew Mosesohn
0a7c6eb9dc
Merge pull request #998 from mattymo/fix_upgrade_daemonsets
...
Fix upgrade for all daemonset type resources
2017-02-09 20:02:21 +03:00
Greg Althaus
3f0c13af8a
Make kubelet_load_modules always present but false.
...
Update code and docs for that assumption.
2017-02-09 10:25:44 -06:00
Greg Althaus
fcd78eb1f7
Due to the nsenter and other reworks, it appears that
...
kubelet lost the ability to load kernel modules. This
puts that back by adding the lib/modules mount to kubelet.
The new variable kubelet_load_modules can be set to true
to enable this item. It is OFF by default.
2017-02-09 10:02:26 -06:00
Matthew Mosesohn
17dfae6d4e
Merge pull request #999 from holser/decrease_weave_ram_limits
...
Lower weave RAM settings.
2017-02-09 13:19:12 +03:00
Mark Lee
e414c25fd7
follow sysctl.conf file symlink if linked
2017-02-09 18:16:52 +09:00
Mark Lee
34a71554ae
use ansible sysctl module for config ip forwarding
2017-02-09 17:28:44 +09:00
Bogdan Dobrelya
3b1a196c75
Merge pull request #902 from insequent/master
...
Adding vault role
2017-02-09 09:24:52 +01:00
Bogdan Dobrelya
105dbf471e
Merge pull request #993 from code0x9/master
...
enable proxy support on docker repository
2017-02-09 09:21:01 +01:00
Antoine Legrand
68df0d4909
Merge pull request #986 from vwfs/dnsmasq_system_nameservers
...
Also add the system nameservers to upstream servers in dnsmasq
2017-02-08 23:21:54 +01:00
Josh Conant
245e05ce61
Vault security hardening and role isolation
2017-02-08 21:41:36 +00:00
Josh Conant
f4ec2d18e5
Adding the Vault role
2017-02-08 21:31:28 +00:00
Sergii Golovatiuk
4124d84c00
Lower weave RAM settings.
...
- Since Weave 1.8.x was rewritten in Golang we may decrease RAM settings
to continue using g1-small for CI
2017-02-08 18:50:36 +01:00
Matthew Mosesohn
3c713a3f53
Fix upgrade for all daemonset type resources
...
Daemonsets cannot be simply upgraded through a single API call,
regardless of any kubectl documentation. The resource must be
purged and then recreated in order to make any changes.
2017-02-08 18:16:00 +03:00
Alexander Block
89e570493a
Also add the system nameservers to upstream servers in dnsmasq
...
Also make no-resolv unconditional again. Otherwise, we may end up in
a resolver loop. The resolver loop was the cause for the piling up
parallel queries.
2017-02-08 14:38:55 +01:00
Matthew Mosesohn
16674774c7
Merge pull request #994 from mattymo/docker_save
...
Change docker save compress level to 1
2017-02-08 15:13:15 +03:00
Matthew Mosesohn
0180ad7f38
Merge pull request #990 from mattymo/fix_cert_upgrade
...
Fix check for node-NODEID certs existence
2017-02-08 14:44:09 +03:00
Matthew Mosesohn
bfd1ea1da1
Merge pull request #971 from bradbeam/efk
...
Adding EFK logging stack
2017-02-08 14:28:04 +03:00
Mark Lee
3eacd0c871
Update rh_docker.repo.j2
2017-02-08 20:03:51 +09:00
Matthew Mosesohn
d587270293
Merge pull request #992 from vwfs/host_mount_dev
...
Host mount /dev for kubelet
2017-02-08 13:45:22 +03:00
Matthew Mosesohn
3eb13e83cf
Change docker save compress level to 1
...
Faster gzip improves CI deploy times by at least 2 mins.
Fixes #982
2017-02-08 13:25:11 +03:00
Mark Lee
df761713aa
Merge branch 'master' of https://github.com/kubespray/kargo
2017-02-08 19:19:26 +09:00
Mark Lee
de50f37fea
enable proxy support on docker repository
2017-02-08 19:19:08 +09:00
Matthew Mosesohn
bad6076905
Merge pull request #987 from mattymo/etcd-retune
...
Re-tune ETCD performance params
2017-02-08 13:00:25 +03:00
Bogdan Dobrelya
c2bd76a22e
Merge pull request #956 from adidenko/update-netchecker
...
Update playbooks to support new netchecker
2017-02-08 10:09:46 +01:00
Alexander Block
010fe30b53
Host mount /dev for kubelet
2017-02-08 09:55:51 +01:00
Matthew Mosesohn
e5779ab786
Fix check for node-NODEID certs existence
...
Fixes upgrade from pre-individual node cert envs.
2017-02-07 21:06:48 +03:00
Matthew Mosesohn
71e14a13b4
Re-tune ETCD performance params
...
Reduce election timeout to 5000ms (was 10000ms)
Raise heartbeat interval to 250ms (was 100ms)
Remove etcd cpu share (was 300)
Make etcd_cpu_limit and etcd_memory_limit optional.
2017-02-07 20:15:14 +03:00
Matthew Mosesohn
491074aab1
Merge pull request #969 from mattymo/port_reserve
...
Prevent dynamic port allocation in nodePort range
2017-02-07 18:24:57 +03:00
Aleksandr Didenko
54af533b31
Update playbooks to support new netchecker
...
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
2017-02-07 15:20:34 +01:00
Matthew Mosesohn
f3a0f73588
Prevent dynamic port allocation in nodePort range
...
kube_apiserver_node_port_range should be accessible only
to kube-proxy and not be taken by a dynamic port allocation.
Potentially temporary if https://github.com/kubernetes/kubernetes/issues/40920
gets fixed.
2017-02-06 20:01:16 +03:00
Sergii Golovatiuk
5122697f0b
Improve Weave
...
- Remove weave CPU limits from .gitlab-ci.yml. Closes : #975
- Fix weave version in documentation
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-06 13:24:40 +01:00
Antoine Legrand
bd1c764a1a
Merge pull request #963 from rutsky/bastion-ansible-host
...
handle both 'ansible_host' and 'ansible_ssh_host' in bastion configration
2017-02-04 15:42:39 -05:00
Brad Beam
df3e11bdb8
Adding EFK logging stack
2017-02-03 16:27:08 -06:00
Bogdan Dobrelya
5a7a3f6d4a
Merge pull request #949 from vmtyler/master
...
Fixes Support for OpenStack v3 credentials
2017-02-03 12:22:00 +01:00
Vladimir Rutsky
b4327fdc99
handle both 'ansible_host' and 'ansible_ssh_host' in bastion configuration
...
'absible_ssh_host' is deprecated in Ansible 2.0 and at least
'contrib/inventory_builder/inventory.py' uses 'ansible_host' instead.
2017-02-02 18:34:53 +03:00
Matthew Mosesohn
10f924a617
Merge pull request #927 from holser/nsenter_fix
...
Remove nsenter workaround
2017-02-02 18:18:15 +03:00
Matthew Mosesohn
3dd6a01c8b
Merge pull request #901 from galthaus/dns-tweak
...
DHCP Hook protections
2017-02-02 16:47:16 +03:00
Sergii Golovatiuk
585afef945
Remove nsenter workaround
...
- Docker 1.12 and further don't need nsenter hack. This patch removes
it. Also, it bumps the minimal version to 1.12.
Closes #776
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-02 14:38:11 +01:00
Sergii Golovatiuk
f2e4ffcac2
Fix weave-net after upgrade to 1.82
...
- Set recommended CPU settings
- Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
- Limit DS creation to master
- Combined 2 tasks into one with better condition
2017-02-02 10:31:58 +01:00
Matthew Mosesohn
ae66b6e648
Merge pull request #957 from mattymo/weave-net-naming
...
Rename weave-kube to weave-net
2017-02-02 10:18:02 +03:00
Greg Althaus
923057c1a8
This continues the DHCP hook checks. Also protect the create side
...
if the system doesn't have any config files at all.
2017-01-31 09:56:27 -06:00
Matthew Mosesohn
0f6e08d34f
Merge pull request #951 from mattymo/k8s-certs-scale
...
Fix cert distribution at scale
2017-01-31 18:49:26 +03:00
Matthew Mosesohn
4889a3e2e1
Merge pull request #954 from artem-panchenko/improve_dnsmasq
...
Explicitly set config path for DNSMasq
2017-01-31 18:48:46 +03:00
Matthew Mosesohn
39d87a96aa
Rename weave-kube to weave-net
...
Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
2017-01-31 18:47:27 +03:00
Matthew Mosesohn
08822ec684
Fix cert distribution at scale
...
Use stdin instead of bash args to pass node filenames and base64 data.
Use tempfile for master cert data
2017-01-31 16:27:45 +03:00
Matthew Mosesohn
6463a01e04
Merge pull request #880 from bradbeam/weave-kube
...
Weave kube
2017-01-31 13:31:09 +03:00
Artem Panchenko
1418fb394b
Explicitly set config path for DNSMasq
...
When DNSMasq is configured to read its settings
from a folder ('-7' or '--conf-dir' option) it only
checks that the directory exists and doesn't fail if
it's empty. It could lead to a situation when DNSMasq
is running and handles requests, but not properly
configured, so some of queries can't be resolved.
2017-01-31 12:14:57 +02:00
Matthew Mosesohn
e4eda88ca9
Merge pull request #944 from tureus/skip-cloud-config-on-etcd
...
Bugfix: skip cloud_config on etcd
2017-01-30 20:12:36 +03:00
Brad Beam
a11b9d28bd
Upgrading weave to weave-kube
2017-01-27 17:05:25 -06:00
Brad Beam
b54eb609bf
Consolidating kube.py module
2017-01-27 11:28:11 -06:00
Tyler Britten
f8ffa1601d
Fixed for non-null output
2017-01-27 10:47:59 -05:00
Tyler Britten
da01bc1fbb
Updated OpenStack vars to check for tenant_id (v2) and project_id (v3)
2017-01-27 10:26:20 -05:00
neith00
bbc8c09753
Using the command module instead of raw
...
Using the command module instead of raw.
Also fixed the syntax.
2017-01-26 16:28:48 +01:00
Xavier Lange
e5fdc63bdd
Bugfix: skip cloud_config on etcd
2017-01-25 14:09:21 -08:00
Aleksandr Didenko
46c177b982
Switch to ansible_hostname in calico
...
For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.
Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
2017-01-25 11:49:58 +01:00
Matthew Mosesohn
f4b7474ade
Merge pull request #926 from adidenko/fix-calico-rr-for-masters
...
Fix calico-rr peering with k8s masters
2017-01-24 12:38:52 +03:00
Alexander Block
9bf792ce0b
Pin docker version on RedHat and CentOS to the desired version
2017-01-23 12:39:54 +01:00
Aleksandr Didenko
f05aaeb329
Fix calico-rr peering with k8s masters
...
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.
Closes #925
2017-01-23 10:19:09 +01:00
Matthew Mosesohn
8ce32eb3e1
Merge pull request #905 from galthaus/async-runs
...
Add tasks to ensure that the first nodes have their directories for cert gen
2017-01-19 18:32:27 +03:00
Matthew Mosesohn
aae0314bda
Merge pull request #904 from galthaus/nginx-port-config
...
Add nginx local balancer port configuration variable
2017-01-19 18:31:57 +03:00
Matthew Mosesohn
35d5248d41
Merge pull request #913 from galthaus/apps-master-only
...
Ansible apps should only check for api-server running on the master.
2017-01-19 18:30:58 +03:00
Matthew Mosesohn
0ccc2555d3
Merge pull request #917 from mattymo/rkt_resolvconf
...
Fix setting resolvconf when using rkt deploy mode
2017-01-19 18:30:21 +03:00
Matthew Mosesohn
b26a711e96
Merge pull request #916 from mattymo/update_ansible
...
Update Ansible to 2.2.1
2017-01-19 18:13:45 +03:00
Matthew Mosesohn
2218a052b2
Merge pull request #921 from mattymo/docker113
...
Add docker 1.13, update 1.12 to 1.12.6
2017-01-19 18:13:21 +03:00
Matthew Mosesohn
33fbcc56d6
Add docker 1.13, update 1.12 to 1.12.6
...
Fixes #903
2017-01-19 13:58:36 +03:00
Sergii Golovatiuk
61d05dea58
Allow to specify number of concurrent DNS queries
...
ndots creates overhead as every pod creates 5 concurrent connections
that are forwarded to sky dns. Under some circumstances dnsmasq may
prevent forwarding traffic with "Maximum number of concurrent DNS
queries reached" in the logs.
This patch allows to configure the number of concurrent forwarded DNS
queries "dns-forward-max" as well as "cache-size" leaving the default
values as they were before.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-01-19 11:47:37 +01:00
Matthew Mosesohn
8a821060a3
Update Ansible to 2.2.1
2017-01-19 13:46:46 +03:00
Greg Althaus
0d44599a63
Add explicit name printing in task names for deletgated task during
...
cert creation
2017-01-18 14:06:50 -06:00
Matthew Mosesohn
b6c3e61603
Fix setting resolvconf when using rkt deploy mode
...
rkt deploy mode doesn't create {{ bin_dir }}/kubelet, so
let's rely on kubelet.env file instad.
2017-01-18 19:18:47 +03:00
Matthew Mosesohn
5420fa942e
Merge pull request #897 from holser/flush_handlers_before_etcd
...
Flush handlers before etcd restart
2017-01-18 12:27:01 +03:00
Matthew Mosesohn
1ee33d3a8d
Merge pull request #910 from mattymo/escape_curly
...
Fix ansible 2.2.1 handling of registered vars
2017-01-18 11:13:01 +03:00
Greg Althaus
61dab8dc0b
Should only check for api-server running on the master.
...
If this runs on other nodes, it will fail the playbook.
2017-01-17 15:57:34 -06:00
Matthew Mosesohn
b2a27ed089
Fix bash completion installation
2017-01-17 20:36:58 +03:00