Commit graph

662 commits

Author SHA1 Message Date
Virgil Chereches
a4d142368b Renamed variable from disable_volume_zone_conflict to volume_cross_zone_attachment and removed cloud provider condition; fix identation 2018-01-23 13:14:00 +00:00
Virgil Chereches
3125f93b3f Added disable_volume_zone_conflict variable 2018-01-18 10:55:23 +00:00
Virgil Chereches
8c45c88d15 Fix for Issue #2141 - added policy file 2018-01-12 07:15:35 +00:00
Virgil Chereches
c87bb2f239 Fix for Issue #2141 2018-01-12 07:07:02 +00:00
Brad Beam
fed7b97dcb
Merge pull request #2030 from mattymo/removerbaccheck
Remove RBAC from boolean checks
2017-12-06 23:41:13 -06:00
Spencer Smith
c4458c9d9a
Merge pull request #1997 from mrbobbytables/feature-keepalived-cloud-provider
Add minimal keepalived-cloud-provider support
2017-12-06 23:28:27 -05:00
Kuldip Madnani
fe036cbe77 Adding changes to handle updation of yum Management cache in rhel. (#2026)
* Adding changes to handle updation of yum cache in rhel.

* Removed the redundant spaces
2017-12-06 09:00:41 +00:00
Matthew Mosesohn
952ec65a40 Remove RBAC from boolean checks 2017-12-06 11:57:40 +03:00
Brad Beam
c2347db934
Merge pull request #1953 from chadswen/dashboard-refactor
Kubernetes Dashboard v1.7.1 Refactor
2017-12-05 08:50:55 -06:00
Steven Hardy
d39a88d63f Allow setting --bind-address for apiserver hyperkube (#1985)
* Allow setting --bind-address for apiserver hyperkube

This is required if you wish to configure a loadbalancer (e.g haproxy)
running on the master nodes without choosing a different port for the
vip from that used by the API - in this case you need the API to bind to
a specific interface, then haproxy can bind the same port on the VIP:

root@overcloud-controller-0 ~]# netstat -taupen | grep 6443
tcp        0      0 192.168.24.6:6443       0.0.0.0:*               LISTEN      0          680613     134504/haproxy
tcp        0      0 192.168.24.16:6443      0.0.0.0:*               LISTEN      0          653329     131423/hyperkube
tcp        0      0 192.168.24.16:6443      192.168.24.16:58404     ESTABLISHED 0          652991     131423/hyperkube
tcp        0      0 192.168.24.16:58404     192.168.24.16:6443      ESTABLISHED 0          652986     131423/hyperkube

This can be achieved e.g via:

kube_apiserver_bind_address: 192.168.24.16

* Address code review feedback

* Update kube-apiserver.manifest.j2
2017-11-29 15:24:02 +00:00
unclejack
e5d353d0a7 contiv network support (#1914)
* Add Contiv support

Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.

* Update contiv version to 1.1.4

Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.

* Load openvswitch module to workaround on CentOS7.4

* Set contiv cni version to 0.1.0

Correct contiv CNI version to 0.1.0.

* Use kube_apiserver_endpoint for K8S_API_SERVER

Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.

* Make contiv use its own etcd

Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.

* Use cp instead of rsync to copy cni binaries

Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.

* Make contiv-etcd able to run on master nodes

* Add rbac_enabled flag for contiv pods

* Add contiv into CNI network plugin lists

* migrate contiv test to tests/files

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>

* Add required rules for contiv netplugin

* Better handling json return of fwdMode

* Make contiv etcd port configurable

* Use default var instead of templating

* roles/download/defaults/main.yml: use contiv 1.1.7

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
Di Xu
de422c822d update nginx tag to use multi-arch docker image (#2009) 2017-11-29 10:39:52 +00:00
Spencer Smith
43600ffcf8
Merge pull request #1972 from chadswen/master-static-pod-flush
Additional flush for static pod master upgrade
2017-11-28 11:36:38 -05:00
Bogdan Dobrelya
8aafe64397
Defaults for apiserver_loadbalancer_domain_name (#1993)
* Defaults for apiserver_loadbalancer_domain_name

When loadbalancer_apiserver is defined, use the
apiserver_loadbalancer_domain_name with a given default value.

Fix unconsistencies for checking if apiserver_loadbalancer_domain_name
is defined AND using it with a default value provided at once.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>

* Define defaults for LB modes in common defaults

Adjust the defaults for apiserver_loadbalancer_domain_name and
loadbalancer_apiserver_localhost to come from a single source, which is
kubespray-defaults. Removes some confusion and simplefies the code.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-11-23 16:15:48 +00:00
Bob Killen
2140303fcc
add minimal keepalived-cloud-provider support 2017-11-23 08:43:36 -05:00
Chad Swenson
0c6f172e75 Kubernetes Dashboard v1.7.1 Refactor
This version required changing the previous access model for dashboard completely but it's a change for the better. Docs were updated.

* New login/auth options that use apiserver auth proxying by default
* Requires RBAC in `authorization_modes`
* Only serves over https
* No longer available at https://first_master:6443/ui until apiserver is updated with the https proxy URL:
* Can access from https://first_master:6443/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/#!/login you will be prompted for credentials
* Or you can run 'kubectl proxy' from your local machine to access dashboard in your browser from: http://localhost:8001/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/
* It is recommended to access dashboard from behind a gateway that enforces an authentication token, details and other access options here: https://github.com/kubernetes/dashboard/wiki/Accessing-Dashboard---1.7.X-and-above
2017-11-15 10:05:48 -06:00
Matthew Mosesohn
f9b68a5d17
Revert "Support for disabling apiserver insecure port" (#1974) 2017-11-14 13:41:28 +00:00
Chad Swenson
1f99710b21 Additional flush for static pod master upgrade
Thought this wasn't required at first but I forgot there's no auto flush at the end of these tasks since the `kubernetes/master` role is not the end of the play.
2017-11-13 18:11:57 -06:00
neith00
5f39efcdfd adding mount for kubelet to enable rbd mounts (#1957)
* adding mount for kubelet to enable rbd mounts

* fix conditionnal variable name
2017-11-13 14:04:13 +00:00
Spencer Smith
09d85631dc
Merge pull request #1944 from chadswen/reload-master-pods
Master component and kubelet container upgrade fixes
2017-11-08 22:23:12 -05:00
Chad Swenson
e9f795c5ce Master component and kubelet container upgrade fixes
* Fixes an issue where apiserver and friends (controller manager, scheduler) were prevented from restarting after manifests/secrets are changed. This occurred when a replaced kubelet doesn't reconcile new master manifests, which caused old master component versions to linger during deployment. In my case this was causing upgrades from k8s 1.6/1.7 -> k8s 1.8 to fail
* Improves transitions from kubelet container to host kubelet by preventing issues where kubelet container reappeared during the deployment
2017-11-08 01:40:33 -06:00
Chad Swenson
0c7e1889e4 Support for disabling apiserver insecure port
This allows `kube_apiserver_insecure_port` to be set to 0 (disabled). It's working, but so far I have had to:

1. Make the `uri` module "Wait for apiserver up" checks use `kube_apiserver_port` (HTTPS)
2. Add apiserver client cert/key to the "Wait for apiserver up" checks
3. Update apiserver liveness probe to use HTTPS ports
4. Set `kube_api_anonymous_auth` to true to allow liveness probe to hit apiserver's /healthz over HTTPS (livenessProbes can't use client cert/key unfortunately)
5. RBAC has to be enabled. Anonymous requests are in the `system:unauthenticated` group which is granted access to /healthz by one of RBAC's default ClusterRoleBindings. An equivalent ABAC rule could allow this as well.

Changes 1 and 2 should work for everyone, but 3, 4, and 5 require new coupling of currently independent configuration settings. So I also added a new settings check.

Options:

1. The problem goes away if you have both anonymous-auth and RBAC enabled. This is how kubeadm does it. This may be the best way to go since RBAC is already on by default but anonymous auth is not.
2. Include conditional templates to set a different liveness probe for possible combinations of `kube_apiserver_insecure_port = 0`, RBAC, and `kube_api_anonymous_auth` (won't be possible to cover every case without a guaranteed authorizer for the secure port)
3. Use basic auth headers for the liveness probe (I really don't like this, it adds a new dependency on basic auth which I'd also like to leave independently configurable, and it requires encoded passwords in the apiserver manifest)

Option 1 seems like the clear winner to me, but is there a reason we wouldn't want anonymous-auth on by default? The apiserver binary defaults anonymous-auth to true, but kubespray's default was false.
2017-11-06 14:01:10 -06:00
Günther Grill
0d55ed3600 Avoid that some read-only tasks cause an ansible-change (#1910) 2017-11-06 13:51:07 +00:00
Haiwei Liu
ad0cd6939a Add support cAdvisor (#1908)
Signed-off-by: Haiwei Liu <carllhw@gmail.com>
2017-11-06 13:50:28 +00:00
Stanislav Makar
33adb334cd Fix openstack tenant id variable name (#1932) 2017-11-05 08:40:41 +00:00
Spencer Smith
ef87a8a1f0
Merge pull request #1916 from vtomasr5/master
Fix bad handler directory name in kubeadm role
2017-11-03 18:14:48 -04:00
Matthew Mosesohn
ab3832f3e7
Set host IP for kubelet always (#1924)
* Set host IP for kubelet always

Use ansible default IP if ip var is not set.

* Update main.yml
2017-11-03 10:19:37 +00:00
Günther Grill
0195725563 Workaround ansible bug where access var via dict doesn't get real value (#1912)
* Change deprecated vagrant ansible flag 'sudo' to 'become'

* Workaround ansible bug where access var via dict doesn't get real value

When accessing a variable via it's name "{{ foo }}" its value is
retrieved. But when the variable value is retrieved via the vars-dict
"{{ vars['foo'] }}" this doesn't resolve the expression of the variable
any more due to a bug. So e.g. a expression foo="{{ 1 == 1 }}" isn't
longer resolved but just returned as string "1 == 1".

* Make file yamllint complient
2017-11-03 07:11:14 +00:00
Spencer Smith
ec1170bd37 only mount volumes if local_volumes_enabled is true. fix mount flags in rkt. (#1923) 2017-11-03 07:10:37 +00:00
Spencer Smith
4771716ab2
Merge pull request #1907 from mattymo/disable_anon_auth
Block anonymous auth requests to kubelet
2017-11-02 12:01:39 -04:00
Spencer Smith
b156585739
Merge pull request #1917 from chadswen/docker-daemon-graph
Fix kubelet container with alternate Docker data paths
2017-11-02 11:58:55 -04:00
Matthew Mosesohn
3e3787de15 Fix local volume provisioner mount point for rkt 2017-11-02 09:45:26 +00:00
Chad Swenson
0c824d5ef1 Fix kubelet container with alternate Docker data paths
Some time ago I think the hardcoded `/var/lib/docker` was required, but kubelet running in a container has been aware of the Docker path since at least as far back as k8s 1.6.

Without this change, you see a large number of errors in the kubelet logs if you installed with a non-default `docker_daemon_graph`
2017-11-01 13:25:15 -05:00
Matthew Mosesohn
c0e989b17c
New addon: local_volume_provisioner (#1909) 2017-11-01 14:25:35 +00:00
Vicenç Juan Tomàs Montserrat
5218b3af82 Fix bad handler directory name in kubeadm role 2017-11-01 14:36:28 +01:00
Spencer Smith
ef0a91da27
Merge pull request #1891 from rsmitty/proxy-fixes
Improved proxy support
2017-10-31 14:32:12 -04:00
Spencer Smith
19962f6b6a fix indentation for master template (#1906) 2017-10-31 06:43:54 +00:00
Matthew Mosesohn
f7703dbca3 Block anonymous auth requests to kubelet 2017-10-30 19:06:54 +00:00
Spencer Smith
b27453d8d8 improved proxy support 2017-10-30 11:42:14 -04:00
Spencer Smith
4470ee4ccf
Merge pull request #1887 from mattymo/fix_indent_apiserver
fix indentation for network policy option
2017-10-30 11:33:13 -04:00
abelgana
d738acf638 Update kubelet.kubeadm.env.j2 (#1901) 2017-10-30 11:33:02 +00:00
tanshanshan
84d92aa3c7 fix-bug (#1900) 2017-10-30 11:23:24 +00:00
Spencer Smith
591941bd39
Merge pull request #1884 from abelgana/master
Sysctl reload if needed after IP forward enabling
2017-10-27 15:12:08 -04:00
Spencer Smith
e90769c869
Merge pull request #1888 from chapsuk/issue_1885
Disable swap in vagrant vms
2017-10-27 15:10:16 -04:00
mkrasilnikov
2c7c956be9 Disable swap in vagrant vms 2017-10-27 19:57:54 +03:00
Matthew Mosesohn
fe81bba08d Force kubelet certificates to be generated as lowercase (#1886)
All nodes get converted to lowercase, so certs should set
CN with lowercase as well.
2017-10-27 15:58:25 +01:00
Matthew Mosesohn
564de07963 fix indentation for network policy option 2017-10-27 14:56:22 +01:00
abelgana
d9160f19c0 Sysctl reload if needed after IP forward enabling
Add reload yes to reload sysctl if the value of net.ipv4.ip_forward changes.

- name: Enable ip forwarding
  sysctl:
    sysctl_file: "{{sysctl_file_path}}"
    name: net.ipv4.ip_forward
    value: 1
    state: present
    reload: yes
  tags:
    - bootstrap-os
2017-10-26 13:06:21 -04:00
Brad Beam
ba0a03a8ba Merge pull request #1880 from mattymo/node_auth_fixes2
Move cluster roles and system namespace to new role
2017-10-26 10:02:24 -05:00
Matthew Mosesohn
b0f04d925a Update network policy setting for Kubernetes 1.8 (#1879)
It is now enabled by default in 1.8 with the api changed
to networking.k8s.io/v1 instead of extensions/v1beta1.
2017-10-26 15:35:26 +01:00