Commit graph

500 commits

Author SHA1 Message Date
Matthew Mosesohn
4348e78b24 Enable kubeadm etcd mode (#4818)
* Enable kubeadm etcd mode

Uses cert commands from kubeadm experimental control plane to
enable non-master nodes to obtain etcd certs.

Related story: PROD-29434

Change-Id: Idafa1d223e5c6ceadf819b6f9c06adf4c4f74178

* Add validation checks and exclude calico kdd mode

Change-Id: Ic234f5e71261d33191376e70d438f9f6d35f358c

* Move etcd mode test to ubuntu flannel HA job

Change-Id: I9af6fd80a1bbb1692ab10d6da095eb368f6bc732

* rename etcd_mode to etcd_kubeadm_enabled

Change-Id: Ib196d6c8a52f48cae370b026f7687ff9ca69c172
2019-06-20 11:12:51 -07:00
Neven Miculinic
27a99e0a3f Added configurable min memory assertions (#4307) 2019-06-10 23:22:15 -07:00
Andreas Krüger
3cc351dff9 Require min version of Kubernetes (#4860)
* Require minimum version of Kubernetes

* Remove checksums for kubernetes version 1.12

* Add kube_version to precheck output and add min required version to README

* Fix merge

* Fix defaults

* Fix typo in precheck
2019-06-10 23:18:15 -07:00
Frank Ritchie
ab6f0012cc Make local volume provisioner dir mode a variable (#4821)
* Make local volume provisioner dir mode a variable

I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.

* Make local volume provisioner dir mode a variable

I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
2019-06-06 04:36:14 -07:00
Dani Comnea
d540560619 Preinstall fails on checking etcd group length (#4839) 2019-06-05 01:37:53 -07:00
Andreas Krüger
797bfd85b0 Only create kubeadm compat cert dir link if it does not exist (#4840) 2019-06-05 01:27:53 -07:00
Sergey Nuzhdin
07cb8ebef7 Add support for arm images for hyperkube, kubeadm and cni_binary (#4261)
* Add support for arm images for hyperkube, kubeadm and cni_binary

* Add dummy etcd checksum for arm

This commit adds dummy etcd checksum for arm to avoid "no attribute" error
during setup.

* Add etcd host assert check

* Add 1.13.4 checksums of kubeadm and hyperkube for arm

* Update checksums of kubeadm and hyperkube for arm

* Add dummy checksums for calicoctl_binary_checksums dict

* disable gather_facts because it causes tests to fail

* Remove architecture check for etcd, due to unable to run tests
2019-06-05 00:05:55 -07:00
Matthew Mosesohn
6347419233 Avoid duplicating nameservers (#4833) 2019-06-04 00:13:02 -07:00
Jacopo Secchiero
5d9946184a Add ignore_assert_errors to "kube-master, ... (#4779)
... kube-node or etcd is empty" task
As a assert must be ignored if ignore_assert_errors is true
2019-05-20 11:25:14 -07:00
MarkusTeufelberger
73c2ff17dd Fix Ansible-lint error [E502] (#4743) 2019-05-16 00:27:43 -07:00
Manuel Cintron
d5c0829d61 Removing unnecessary httplib2 install (#4708) 2019-05-03 17:55:38 -07:00
MarkusTeufelberger
e67f848abc ansible-lint: add spaces around variables [E206] (#4699) 2019-05-02 14:24:21 -07:00
MarkusTeufelberger
88d919337e ansible-lint: don't compare to empty string [E602] (#4665) 2019-04-28 23:00:20 -07:00
MarkusTeufelberger
a65605b17a ansible-lint: Don't use bare variables (#4608)
Circumvented one false positive from ansible-lint
Moved a block of jinja magic into its own variable
2019-04-23 22:20:00 -07:00
MarkusTeufelberger
424e59805f ansible-lint: Fix commands that are also available as module (#4619) 2019-04-23 22:18:00 -07:00
Matthew Mosesohn
09fe95bc60 Avoid creating k8s cert dir on non-k8s nodes (#4602) 2019-04-21 15:27:43 -07:00
Matthew Mosesohn
05dc2b3a09 Use K8s 1.14 and add kubeadm experimental control plane mode (#4514)
* Use K8s 1.14 and add kubeadm experimental control plane mode

This reverts commit d39c273d96.

* Cleanup kubeadm setup run on first master

* pin kubeadm_certificate_key in test

* Remove kubelet autolabel of kube-node, add symlink for pki dir

Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
2019-04-19 06:01:54 -07:00
Maxime Guyot
b218e17f44 ansible-lint: E403 Package installs should not use latest (#4500) 2019-04-18 01:34:08 -07:00
Maxime Guyot
37eac010c8 ansible-lint: Don’t compare to literal True/False (#4499) 2019-04-17 08:42:03 -07:00
Matthew Mosesohn
c5fb734098 Switch calicoctl from a container to a binary (#4524) 2019-04-15 04:24:04 -07:00
Matthew Mosesohn
d39c273d96 Revert "Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)" (#4510)
This reverts commit 316508626d.
2019-04-11 12:52:43 -07:00
Matthew Mosesohn
316508626d Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)
* Use Kubernetes 1.14 and experimental control plane support

* bump to v1.14.0
2019-04-11 05:30:13 -07:00
Neven Miculinic
a30ad1e5a5 Added generic CNI network plugin (#4322)
* Added generic CNI network plugin

* Added CNI network plugin documentation

* added necessary fix
2019-04-10 04:16:15 -07:00
Maxime Guyot
8ad74404c9 Remove bash-completion (#4431) 2019-04-05 01:23:22 -07:00
Maxime Guyot
1ce2f04f47 allow Suse OS family (#4430) 2019-04-04 03:02:51 -07:00
Matthew Mosesohn
5f12b7aedf Remove kubedns and dnsmasq. Move dns_late phase after apps (#4406)
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
2019-04-01 12:32:34 -07:00
Matthew Mosesohn
b7fd462944 Fix support for ansible 2.7.9 (#4375) 2019-03-20 11:29:42 -07:00
Matthew Mosesohn
ec08303f82 Revert "Fix #4237: update kube cert path (#4354)" (#4369)
This reverts commit ea7a6f1cf1.

This change modified the certs dir for Kubernetes, but did not move the directories for existing clusters.
2019-03-20 05:56:57 -07:00
Dmitry Chepurovskiy
ea7a6f1cf1 Fix #4237: update kube cert path (#4354) 2019-03-17 23:55:11 -07:00
Matthew Mosesohn
acbf3db233 Remove hard dependence on facts for all nodes (#4304)
* Remove hard dependence on facts for all nodes

* Update main.yaml

* Update main.yaml
2019-03-05 03:04:39 -08:00
Matthew Mosesohn
adf6a7121f Reenable set_facts task for dns_late (#4312) 2019-03-01 05:39:30 -08:00
hikoz
67832aada9 changed_when:false (#4189) 2019-02-25 20:09:30 -08:00
Gabor Lekeny
b4aaa7b908 Speed up tasks (#4278)
* fact gathering should run only once per node
* eliminate ansible version check, it is at the beginning of each
  playbook
2019-02-25 19:56:23 -08:00
Matthew Mosesohn
b07641c3f3 Move kube_proxy_remove out of set_facts and set default (#4180) 2019-02-25 00:08:06 -08:00
hikoz
e03588f431 use swapon -s (#4216) 2019-02-14 02:35:17 -08:00
Sergey
fbce6349c4 check kube_pods_subnet and kube_service_addresses to valid ip network range, not single ip address (#4188) 2019-02-11 14:12:06 -08:00
Earl C. Ruby III
52e0aa7a80 Install the latest filesystem creation packages (#3904)
This PR ensures that the e2fsprogs and xfsprogs packages are
installed on all Kubernetes nodes and that the packages are
the latest versions. It also ensures that the nodes can
create XFS filesystems when necessary, since not all distros
install xfsprogs by default.

e2fsprogs - ext2/ext3/ext4 file system utilities
xfsprogs - Utilities for managing the XFS filesystem
2019-02-04 12:23:33 -08:00
Sorin Sbarnea
316b73178d Add timeout to Get current version of calico cluster version (#4149)
Avoid waiting forever for this task that should be very quick.

Fixes: #4148
2019-02-01 20:09:04 -08:00
Erwan Miran
7f93a5a0f5 Fix deprecation warnings (#4130)
* use not deprecated ansible_play_hosts variable

* Using tests as filters is deprecated

* Fix deprecation warning about pkg list
2019-01-31 14:57:22 -08:00
Chad Swenson
72802e4d8d Bugfixes for Local Volume Provisioner
- Fixed an issue where storage class host directories were looped
through excessive target hosts
- Fixes examples in the LVP `README.md` to use nested dicts instead of a
list of dicts
2019-01-08 17:45:20 -06:00
Wilmar den Ouden
4fb8adb9e4 More dynamic local-storage-provisioner approach (#3472)
* Makes local volume provisioner more dynamic

* Correct variable name in local storage provisioner defaults

* Updates external-provisioner readme

* Updates variable naming to be more clear, more documentation, fixes sample inventory

* Variable refactor, untangled some jinja2 loops

* Corrects variable name

* No variable substitution in dict keys, replaced with anchor

* Fixes default storage_classes dict, inline docs

* Fixes spelling in inline docs

* Addresses comments in review

* Updates all the defaults

* Fix failing CI task

* Fixes external provisioner daemonset
2019-01-08 12:36:44 -08:00
Gautam Divgi
320f4d4d7f Added filters for integer conversion of kubelet_max_pods and kube_network_node_prefix (#3857) 2018-12-26 13:58:53 -08:00
Ganesh Maharaj Mahalingam
73aee004ac Enable ClearLinux as a distro in kubespray (#3855)
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
2018-12-18 01:39:25 -08:00
Maxim Snezhkov
5e84dabb46 Fix assertion for alone etcd nodes (#3847) 2018-12-12 05:21:54 -08:00
Maxim Snezhkov
90a7941d56 Fix disabling swap on ubuntu systems (#3864) 2018-12-11 02:42:00 -08:00
Andreas Krüger
d5ce5874e8 Streamline path to certs dir (#3836)
* Streamline path to certs dir

* More fixes

* Set path to etcd certs in kubernetes defaults instead
2018-12-06 23:11:53 -08:00
Andreas Krüger
ddffdb63bf Remove non-kubeadm deployment (#3811)
* Remove non-kubeadm deployment

* More cleanup

* More cleanup

* More cleanup

* More cleanup

* Fix gitlab

* Try stop gce first before absent to make the delete process work

* More cleanup

* Fix bug with checking if kubeadm has already run

* Fix bug with checking if kubeadm has already run

* More fixes

* Fix test

* fix

* Fix gitlab checkout untill kubespray 2.8 is on quay

* Fixed

* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path

* Readd secret checking

* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0

* fix typo

* Fix CI jobs to kubeadm again. Fix broken hyperkube path

* Fix gitlab

* Fix rotate tokens

* More fixes

* More fixes

* Fix tokens
2018-12-06 02:33:38 -08:00
Miao Zhou
fefa1670a6 fix calico_version wrong get (#3694)
the ':' makes wrong return of calico_version after the calicoctl downloaded && before the cluster is up
2018-11-12 07:35:21 -08:00
Antoine Legrand
3dcb914607 Remove Vault (#3684)
* Remove Vault

* Remove reference to 'kargo' in the doc

* change check order
2018-11-10 08:51:24 -08:00
RuriRyan
c2710899ed Fixes network restart for Ubuntu Bionic Beaver (#3600)
As Ubuntu Bionic Beaver uses systemd-networkd the step fails
if it tries to restart networking, as it is nonexistent.
2018-11-09 08:13:57 -08:00
Erwan Miran
a6932b6b81 Install ipvsadm when kube_proxy_mode is ipvs (#3548) 2018-11-07 14:04:11 -08:00
Matthew Mosesohn
2ba4e9bda5 Skip most of kubernetes/preinstall role during late DNS config (#3627)
When using resolvconf_mode host_resolvconf, there is an early DNS
config stage where Kubernetes cluster DNS is not injected for host
DNS intially. Later, the cluster DNS is enabled, but we do not
need to run every task from the kubernetes/preinstall role.
2018-11-01 08:08:50 -07:00
Louis
a84508d6b9 remove deprecated parameters of blockinfile module (#3581) 2018-10-30 05:56:58 -07:00
Louis
93104d9224 fix typo 2018-10-24 11:39:15 +08:00
Erwan Miran
87193fd270 Fix ansible syntax to avoid ansible warnings (one more) (#3536)
* warning on meta flush_handlers

* avoid rm

* avoid "Module remote_tmp /root/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir with the correct permissions manually" warning on subsequent tasks using blockinfile

* is match
2018-10-17 12:27:11 -07:00
Erwan Miran
7bec169d58 Fix ansible syntax to avoid ansible deprecation warnings (#3512)
* failed

* version_compare

* succeeded

* skipped

* success

* version_compare becomes version since ansible 2.5

* ansible minimal version updated in doc and spec

* last version_compare
2018-10-16 15:33:30 -07:00
JuanJo Ciarlante
a5edd0d709 [jjo] add kube-router support (#3339)
* [jjo] add kube-router support

Fixes cloudnativelabs/kube-router#147.

* add kube-router as another network_plugin choice
* support most used kube-router flags via
  `kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
  `kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
  install, should also work for recent kubeadm releases via
  `skipKubeProxyInstall: true` config

* [jjo] address PR#3339 review from @woopstar

* add busybox image used by kube-router to downloads

* fix busybox download groups key

* rework kubeadm_enabled + kube_router_run_service_proxy

- verify it working ok w/the kubeadm_enabled and
  kube_router_run_service_proxy true or false

- introduce `kube_proxy_remove` fact, to decouple logic
  from kube_proxy_mode (which affects kubeadm configmap
  settings, thus no-good to ab-use it to 'none')

* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy

* address @woopstar latest review

* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml

* fix kube_router_run_service_proxy conditional for kube-proxy removal

* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes

* update kube-router tolerations for 1.12 compatibility

* add PriorityClass to kube-router DaemonSet
2018-10-16 07:15:05 -07:00
anarcat
c33e08c3fa show FQDN first in /etc/hosts (closes: #3521) (#3522)
The hosts(5) manpage clearly states that the first entry is the
"canonical name", or FQDN (Fully-Qualified Domain Name):

    IP_address canonical_hostname [aliases...]

By using the alias as a first entry, `hostname -f` does not return the
correct domain which breaks all sorts of unrelated functionality (it
has impact over email server configuration, for example).
2018-10-16 03:55:55 -07:00
JuanJo Ciarlante
4077934519 [jjo] add DIND support to contrib/ (#3468)
* [jjo] add DIND support to contrib/

- add contrib/dind with ansible playbook to
  create "node" containers, and setup them to mimic
  host nodes as much as possible (using Ubuntu images),
  see contrib/dind/README.md

- nodes' /etc/hosts editing via `blockinfile` and
  `lineinfile` need `unsafe_writes: yes` because /etc/hosts
  are mounted by docker, and thus can't be handled atomically
  (modify copy + rename)

* dind-host role: set node container hostname on creation

* add "Resulting deployment" section with some CLI outputs

* typo

* selectable node_distro: debian, ubuntu

* some fixes for node_distro: ubuntu

* cpu optimization: add early `pkill -STOP agetty`

* typo

* add centos dind support ;)

* add kubespray-dind.yaml, support fedora

- add kubespray-dind.yaml (former custom.yaml at README.md)
- rework README.md as per above
- use some YAML power to share distros' commonality
- add fedora support

* create unique /etc/machine-id and other updates

- create unique /etc/machine-id in each docker node,
  used as seed for e.g. weave mac addresses

- with above, now netchecker 100% passes WoHooOO!
  🎉 🎉 🎉

- updated README.md output from (1.12.1, verified
  netcheck)

* minor typos

* fix centos node creation, needs earlier udevadm removal to avoid flaky facts, also verified netcheck Ok \o/

* add Q&D test-distros.sh, back to manual /etc/machine-id hack

* run-test-distros.sh cosmetics and minor fixes

* run-test-distros.sh: $rc fix and minor formatting changes

* run-test-distros.sh output cosmetics
2018-10-15 09:44:02 +02:00
Andreas Krüger
2117e8167d Update pre-install verify settings with network checks and etc. (#3504)
* Update pre-install verify settings with network checks and etc.

* Remove upstream dns server check. It's bogus
2018-10-11 06:28:21 -07:00
Chad Swenson
6602760a48 Support multiple local volume provisioner StorageClasses (#3450)
- Local Volume StorageClass configuration is now manged by `local_volume_provisioner_storage_classes`, a list of maps that specifies local storage classes with `name` `host_dir` and `mount_dir` keys per entry
- Tasks and templates updated to loop through local volume storage classes
- Previous defaults for path/class names were not changed
- Fixed an issue where a `kubernetes/preinstall` was creating directories inconsistently with the `kubernetes-apps/external_provisioner/local_volume_provisioner` task
2018-10-05 05:52:25 -07:00
Sergey Magidovich
2197330727 Add check that kube-master, kube-node and etcd groups are not empty. 2018-09-21 17:02:53 +03:00
Andreas Kruger
09b67c1ad5 Remove EFK from Kubespray 2018-09-20 10:44:17 +02:00
Karol Chrapek
0121bce9e5 Instead of doc update, change the verify step 2018-09-18 22:13:15 +02:00
mlushpenko
ea2c9d8f57 Fix yaml checks 2018-09-06 16:26:57 +02:00
Antoine Legrand
7e140e5f3c
Merge pull request #3122 from jbcraig/fix_cacert_feature
resolve issues with new cacert feature
2018-09-05 23:31:53 +02:00
Erwan Miran
059cd17b47 Fix target hosts generation when /etc/hosts does not contain 127.0.0.1 or ::1 2018-08-31 16:33:18 +02:00
Antoine Legrand
247b9e83d8 etcd arch-image 2018-08-31 13:45:08 +02:00
Antoine Legrand
9c2098b8fa fix kubelet_max_pod assert 2018-08-31 13:45:08 +02:00
Antoine Legrand
48c0c8d854 Update dir list 2018-08-31 13:45:08 +02:00
Erwan Miran
b395bb953f Fix wrong when condition that ends up with jinja error when the content of /etc/hosts contains parenthesis 2018-08-27 21:20:57 +02:00
k8s-ci-robot
7efe287c74
Merge pull request #2474 from mirwan/localhost_in_etc_hosts
Localhost in hosts files should be updated (if necessary), not overriden
2018-08-27 06:25:43 -07:00
k8s-ci-robot
d43cd9a24c
Merge pull request #3104 from maxbrunet/hotfix/replace-local_actions
Use delegate_to: localhost instead of local_action
2018-08-27 02:50:42 -07:00
Maxime Brunet
33135f2ada k8s/preinstall: Turn AND condition into a list 2018-08-25 14:33:31 -04:00
Erwan Miran
1432e511a2 same work with less lines 2018-08-24 14:06:07 +02:00
Antoine Legrand
4882531c29
Merge pull request #3115 from oracle/oracle_oci_controller
Cloud provider support for OCI (Oracle Cloud Infrastructure)
2018-08-23 18:22:45 +02:00
Aivars Sterns
23fd3461bc calico upgrade to v3 (#3086)
* calico upgrade to v3

* update calico_rr version

* add missing file

* change contents of main.yml as it was left old version

* enable network policy by default

* remove unneeded task

* Fix kubelet calico settings

* fix when statement

* switch back to node-kubeconfig.yaml
2018-08-23 17:17:18 +03:00
Erwan Miran
a7b0c454db Localhost in hosts files should be updated (if necessary), not overriden 2018-08-22 12:10:49 +02:00
Jeff Bornemann
94df70be98 Cloud provider support for OCI (Oracle Cloud Infrastructure)
Signed-off-by: Jeff Bornemann <jeff.bornemann@oracle.com>
2018-08-21 17:36:42 -04:00
Mark Eisenblaetter
0c0a2138d9 allow '.' in hostnames
we use FQDN as inventory_hostname
2018-08-21 08:24:33 +02:00
Tatsuyuki Ishi
3eef8dc8d0 Add bad hostname preflight check
Hostname must be a valid DNS name, which is checked as https://github.com/kubernetes/apimachinery/blob/master/pkg/util/validation/validation.go#L115

The situation I have encountered is that my hostname contained underscore which is disallowed and apiserver refused to start.
2018-08-20 09:09:00 +09:00
rongzhang
b421d0ed5b Fix install nss 2018-08-20 00:07:31 +08:00
Antoine Legrand
7a0f0126f7
Merge pull request #1295 from xuhuilong/master
fix curl get calico status error ( error in tls version, centos 7.3 1611)
2018-08-17 14:29:01 +02:00
Jonathan Craig
4d783fff0d resolve issues with new cacert feature 2018-08-16 23:31:21 -04:00
Maxime Brunet
70b28288a3 Use delegate_to: localhost instead of local_action
Allow to use `ansible_become: true` (#2969)
And set it to `false` for `localhost` with an `host_var`
2018-08-14 10:08:43 -04:00
Matthew Mosesohn
581a30fdec Remove erroneous cloud-config task 2018-08-10 15:59:18 +03:00
Rong Zhang
e71f261935
Merge pull request #3068 from riverzhang/swap
Enable swap
2018-08-07 21:29:41 +08:00
rongzhang
b902602d16 Enable swap 2018-08-07 21:13:12 +08:00
Rong Zhang
c288ffc55d
Merge pull request #2342 from southquist/add-ca-cert
allow for setting the cacert on openstack cloud provider
2018-08-07 17:46:01 +08:00
rongzhang
ac644ed049 Fix yaml roles error 2018-08-05 18:48:07 +08:00
woosley.xu
72074f283b set local for growpart part 2 2018-07-31 06:56:09 +08:00
woosley.xu
a5db3dbea9 set locale for growpart 2018-07-31 06:52:56 +08:00
southquist
c685dc493f allow for setting the cacert on openstack cloud provider 2018-06-28 16:00:13 +02:00
Rong Zhang
1aee6ec371
Merge pull request #2903 from riverzhang/swap
Add manage swap on the worker node
2018-06-21 22:20:23 +08:00
rongzhang
3232e2743e Add manage swap on the worker node 2018-06-21 08:15:01 +00:00
Andreas Krüger
c3d8b131db
Merge pull request #2801 from dvazar/bugfix/undefined__network_plugin__variable
Fixed "network_plugin" variable
2018-06-19 10:01:06 +02:00
Aivars Sterns
cb0a257349
Merge pull request #2819 from oleh-ozimok/fix-cidr-assert
Fix enough network address space assert
2018-06-06 07:32:16 +03:00
Dmitry
f912a4ece5 Fix compare AnsibleUnsafeText with int (#2828) 2018-06-04 11:34:10 +03:00
Oleg Ozimok
38f7ba2584 Fix enough network address space assert 2018-05-27 18:01:17 +03:00
dvazar
b3f9cae820 fixed a check unknown networks (cilium & contiv) 2018-05-22 16:43:19 +07:00
Andreas Krüger
a67bdff28c
Merge pull request #2743 from mrostecki/opensuse-tumbleweed-openssl
opensuse: Fix OpenSSL package name
2018-05-22 11:21:04 +02:00
dvazar
4b8daa22f6 Fixes #2800 2018-05-19 00:57:09 +07:00
Christopher J. Ruwe
c1bc4615fe assert that number of pods on node does not exceed CIDR address range
The number of pods on a given node is determined by the  --max-pods=k
directive. When the address space is exhausted, no more pods can be
scheduled even if from the --max-pods-perspective, the node still has
capacity.

The special case that a pod is scheduled and uses the node IP in the
host network namespace is too "soft" to derive a guarantee.

Comparing kubelet_max_pods with kube_network_node_prefix when given
allows to assert that pod limits match the CIDR address space.
2018-05-16 11:55:46 +00:00
Matthew Mosesohn
07cc981971
refactor vault role (#2733)
* Move front-proxy-client certs back to kube mount

We want the same CA for all k8s certs

* Refactor vault to use a third party module

The module adds idempotency and reduces some of the repetitive
logic in the vault role

Requires ansible-modules-hashivault on ansible node and hvac
on the vault hosts themselves

Add upgrade test scenario
Remove bootstrap-os tags from tasks

* fix upgrade issues

* improve unseal logic

* specify ca and fix etcd check

* Fix initialization check

bump machine size
2018-05-11 19:11:38 +03:00
Michal Rostecki
066016cd3e opensuse: Fix OpenSSL package name
OpenSSL 1.1 package in openSUSE Tumbleweed is named openssl-1_1,
not openssl-1_1_0.
2018-05-08 10:03:30 +02:00
mirwan
c3c5817af6 sysctl file should be in defaults so that it can be overriden (#2475)
* sysctl file should be in defaults so that it can be overriden

* Change sysctl_file_path to be consistent with roles/kubernetes/preinstall/defaults/main.yml
2018-04-27 18:50:58 +03:00
Markos Chandras
9168c71359 Revert "Revert "Add openSUSE support" (#2697)" (#2699)
This reverts commit 51f4e6585a.
2018-04-26 12:52:06 +03:00
Matthew Mosesohn
51f4e6585a
Revert "Add openSUSE support" (#2697) 2018-04-23 14:28:24 +03:00
Paul Montero
75950344fb
run_once pre_upgrade tasks which are executing in localhost 2018-04-19 11:38:13 -05:00
Matthew Mosesohn
f73717ea35
Mount local volume provisioner dirs for containerized kubelet (#2648) 2018-04-12 22:55:13 +03:00
Nirmoy Das
45eac53ec7 roles: kubernetes: preinstall: Install openssl-1.1.0 on Tumbleweed
The openssl package on Tumbleweed is actually a virtual package covering
openssl-1.0.0 and openssl-1.1.0 implementations. It defaults to 1.1.0 so
when trying to install it and openssl-1.0.0 is installed, zypper fails
with conflicts. As such, lets explicitly pull the package that we need
which also updates the virtual one.

Co-authored-by: Markos Chandras <mchandras@suse.de>
2018-04-11 17:46:14 +01:00
Markos Chandras
e42203a13e roles: kubernetes: preinstall: Add SUSE support
Add support for installing package dependencies and refreshing metadata
on SUSE distributions

Co-authored-by: Nirmoy Das <ndas@suse.de>
2018-04-11 17:46:14 +01:00
Daniel Hoherd
ca40d51bc6 Fix typos (no logic changes) 2018-04-05 15:54:58 -07:00
Andreas Krüger
ba24fe3226
Merge pull request #2570 from avoidik/transfer-cloud-configs
Move cloud config configurations to proper location
2018-04-02 10:31:38 +02:00
Matthew Mosesohn
3004791c64
Add pre-upgrade task for moving credentials file (#2394)
* Add pre-upgrade task for moving credentials file

This reverts commit 7ef9f4dfdd.

* add python interpreter workaround for localhost
2018-04-02 11:19:23 +03:00
avoidik
15efdf0c16 Move credential checks 2018-03-31 03:26:37 +03:00
avoidik
ab8760cc83 Move credentials pre-check 2018-03-31 03:24:57 +03:00
avoidik
b6da596ec1 Move default configuration parameters for cloud-config 2018-03-31 03:18:23 +03:00
avoidik
3c12c6beb3 Move cloud config configurations to proper location 2018-03-31 02:59:59 +03:00
Matthew Mosesohn
72a4223884 Write cloud-config during kubelet configuration
This file should only be updated during kubelet upgrade so that
master components are not accidentally restarted first during
preinstall stage.
2018-03-28 16:26:36 +03:00
Chad Swenson
7d33650019
Merge pull request #2462 from woopstar/coredns-patch
Add CoreDNS support
2018-03-16 18:33:36 -05:00
woopstar
e40368ae2b Add CoreDNS support with various fixes
Added CoreDNS to downloads

Updated with labels. Should now work without RBAC too

Fix DNS settings on hosts

Rename CoreDNS service from kube-dns to coredns

Add rotate based on http://edgeofsanity.net/rant/2017/12/20/systemd-resolved-is-broken.html

Updated docs with CoreDNS info

Added labels and fixed minor settings from official yaml file: https://github.com/kubernetes/kubernetes/blob/release-1.9/cluster/addons/dns/coredns.yaml.sed

Added a secondary deployment and secondary service ip. This is to mitigate dns timeouts and create high resitency for failures. See discussion at 'https://github.com/coreos/coreos-kubernetes/issues/641#issuecomment-281174806'

Set dns list correct. Thanks to @whereismyjetpack

Only download KubeDNS or CoreDNS if selected

Move dns cleanup to its own file and import tasks based on dns mode

Fix install of KubeDNS when dnsmask_kubedns mode is selected

Add new dns option coredns_dual for dual stack deployment. Added variable to configure replicas deployed. Updated docs for dual stack deployment. Removed rotate option in resolv.conf.

Run DNS manifests for CoreDNS and KubeDNS

Set skydns servers on dual stack deployment

Use only one template for CoreDNS dual deployment

Set correct cluster ip for the dns server
2018-03-16 21:51:37 +01:00
Aivars Sterns
710295bd2f
Merge pull request #2434 from protomech/feature/azure-vnet-resource-group
add support for azure vnetResourceGroup
2018-03-13 17:42:09 +02:00
Wong Hoi Sing Edison
6402004018 FIXUP #2424: local_provisioner directory should be created only if enabled 2018-03-08 11:57:46 +08:00
Michael Beatty
07657aecf4 add support for azure vnetResourceGroup 2018-03-05 13:40:25 -06:00
Wong Hoi Sing Edison
d4c61d2628 Fixup for gce_centos7-flannel-addons 2018-02-21 13:41:25 +08:00
Wong Hoi Sing Edison
deef47c923 Upgrade Local Volume Provisioner Addon to v2.0.0 2018-02-21 13:41:25 +08:00
melkosoft
f13e76d022 Added cilium support (#2236)
* Added cilium support

* Fix typo in debian test config

* Remove empty lines

* Changed cilium version from <latest> to <v1.0.0-rc3>

* Add missing changes for cilium

* Add cilium to CI pipeline

* Fix wrong file name

* Check kernel version for cilium

* fixed ci error

* fixed cilium-ds.j2 template

* added waiting for cilium pods to run

* Fixed missing EOF

* Fixed trailing spaces

* Fixed trailing spaces

* Fixed trailing spaces

* Fixed too many blank lines

* Updated tolerations,annotations in cilium DS template

* Set cilium_version to iptables-1.9 to see if bug is fixed in CI

* Update cilium image tag to v1.0.0-rc4

* Update Cilium test case CI vars filenames

* Add optional prometheus flag, adjust initial readiness delay

* Update README.md with cilium info
2018-02-16 21:37:47 -06:00
Antoine Legrand
76a89039ad
Merge pull request #2285 from jasdeep-hundal/do_not_install_python_apt
Remove redundant python-apt install
2018-02-15 17:04:08 +01:00
jasdeep-hundal
f57abae01e Remove redundant python-apt install
Ansible automatically installs the python-apt package when using
the 'apt' Ansible module, if python-apt is not present. This patch
removes the (unneeded) explicit installation in the Kubespray
'preinstall' role.
2018-02-08 18:59:37 -08:00
rong.zhang
47adf4bce6 Disalbe install epel-release rpm on Centos/Redhat
1.Disalbe install epel-release rpm on Centos/Redhat
2.Use yum install epel-release
2018-02-07 14:58:50 +08:00
Spencer Smith
c0a3bcf9b3
Merge pull request #2221 from Xuxe/patch-vcp-v1.9.2
Updated vSphere cloud provider config for Kubernetes >= v1.9.2 and added resource pool deployment variable
2018-01-31 16:06:07 -05:00
Julian Hübenthal
7f79210ed1 reworked vsphere-cloud-config template 2018-01-31 16:51:23 +01:00
Aivars Sterns
c1267004ef
Merge pull request #2130 from ArchiFleKs/simplify_os_provider
Simplify and update OpenStack cloud provider
2018-01-31 12:02:02 +02:00
Julian Hübenthal
9cdd2214f9 render vsphere_resource_pool only if defined 2018-01-31 09:56:43 +01:00
Julian Hübenthal
989e9174c2 Added vSphere cloud provider config update for Kubernetes >= 1.9.2 2018-01-31 09:15:46 +01:00
Matthew Mosesohn
2df4b6c5d2
Rename default_resolver to cloud_resolver (#2209)
Cloud resolvers are mandatory for hosts on GCE and OpenStack
clouds. The 8.8.8.8 alternative resolver was dropped because
there is already a default nameserver. The new var name
reflects the purpose better.

Also restart apiserver when modifying dns settings.
2018-01-31 00:26:07 +03:00
Matthew Mosesohn
dc6a17e092
Use include/import tasks (#2192)
import_tasks will consume far less memory, so it should be
used whenever it is compatible.
2018-01-29 14:37:48 +03:00
Brad Beam
0c8bed21ee
Merge pull request #2019 from chadswen/disable-api-insecure-port
Support for disabling apiserver insecure port (the sequel)
2018-01-24 19:58:53 -06:00
Matthew Mosesohn
bf1411060e Add optional manual dns_mode (#2178) 2018-01-23 14:28:42 +01:00
ArchiFleKs
ce85bcaee7 Simplify and update OpenStack cloud provider
Simplify the number of variables necessary to "just" enable OpenStack
cloud provider. Also add the new options available in K8s 1.9.
2018-01-05 12:05:24 +01:00
ArchiFleKs
44b9dce134 Fix domain id for OpenStack provider
OpenStack authentication does not support using a mix of DomainID and
DomainName, only one or the other should be used.
2017-12-11 15:57:33 +01:00
Brad Beam
fed7b97dcb
Merge pull request #2030 from mattymo/removerbaccheck
Remove RBAC from boolean checks
2017-12-06 23:41:13 -06:00
Spencer Smith
c4458c9d9a
Merge pull request #1997 from mrbobbytables/feature-keepalived-cloud-provider
Add minimal keepalived-cloud-provider support
2017-12-06 23:28:27 -05:00
Kuldip Madnani
fe036cbe77 Adding changes to handle updation of yum Management cache in rhel. (#2026)
* Adding changes to handle updation of yum cache in rhel.

* Removed the redundant spaces
2017-12-06 09:00:41 +00:00
Matthew Mosesohn
952ec65a40 Remove RBAC from boolean checks 2017-12-06 11:57:40 +03:00
Chad Swenson
b8788421d5 Support for disabling apiserver insecure port
This allows `kube_apiserver_insecure_port` to be set to 0 (disabled).

Rework of #1937 with kubeadm support

Also, fixed an issue in `kubeadm-migrate-certs` where the old apiserver cert was copied as the kubeadm key
2017-12-05 09:13:45 -06:00
Brad Beam
c2347db934
Merge pull request #1953 from chadswen/dashboard-refactor
Kubernetes Dashboard v1.7.1 Refactor
2017-12-05 08:50:55 -06:00
unclejack
e5d353d0a7 contiv network support (#1914)
* Add Contiv support

Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.

* Update contiv version to 1.1.4

Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.

* Load openvswitch module to workaround on CentOS7.4

* Set contiv cni version to 0.1.0

Correct contiv CNI version to 0.1.0.

* Use kube_apiserver_endpoint for K8S_API_SERVER

Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.

* Make contiv use its own etcd

Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.

* Use cp instead of rsync to copy cni binaries

Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.

* Make contiv-etcd able to run on master nodes

* Add rbac_enabled flag for contiv pods

* Add contiv into CNI network plugin lists

* migrate contiv test to tests/files

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>

* Add required rules for contiv netplugin

* Better handling json return of fwdMode

* Make contiv etcd port configurable

* Use default var instead of templating

* roles/download/defaults/main.yml: use contiv 1.1.7

Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
2017-11-29 14:24:16 +00:00
Bogdan Dobrelya
8aafe64397
Defaults for apiserver_loadbalancer_domain_name (#1993)
* Defaults for apiserver_loadbalancer_domain_name

When loadbalancer_apiserver is defined, use the
apiserver_loadbalancer_domain_name with a given default value.

Fix unconsistencies for checking if apiserver_loadbalancer_domain_name
is defined AND using it with a default value provided at once.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>

* Define defaults for LB modes in common defaults

Adjust the defaults for apiserver_loadbalancer_domain_name and
loadbalancer_apiserver_localhost to come from a single source, which is
kubespray-defaults. Removes some confusion and simplefies the code.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-11-23 16:15:48 +00:00
Bob Killen
2140303fcc
add minimal keepalived-cloud-provider support 2017-11-23 08:43:36 -05:00
Chad Swenson
0c6f172e75 Kubernetes Dashboard v1.7.1 Refactor
This version required changing the previous access model for dashboard completely but it's a change for the better. Docs were updated.

* New login/auth options that use apiserver auth proxying by default
* Requires RBAC in `authorization_modes`
* Only serves over https
* No longer available at https://first_master:6443/ui until apiserver is updated with the https proxy URL:
* Can access from https://first_master:6443/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/#!/login you will be prompted for credentials
* Or you can run 'kubectl proxy' from your local machine to access dashboard in your browser from: http://localhost:8001/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/
* It is recommended to access dashboard from behind a gateway that enforces an authentication token, details and other access options here: https://github.com/kubernetes/dashboard/wiki/Accessing-Dashboard---1.7.X-and-above
2017-11-15 10:05:48 -06:00
Matthew Mosesohn
f9b68a5d17
Revert "Support for disabling apiserver insecure port" (#1974) 2017-11-14 13:41:28 +00:00
Chad Swenson
0c7e1889e4 Support for disabling apiserver insecure port
This allows `kube_apiserver_insecure_port` to be set to 0 (disabled). It's working, but so far I have had to:

1. Make the `uri` module "Wait for apiserver up" checks use `kube_apiserver_port` (HTTPS)
2. Add apiserver client cert/key to the "Wait for apiserver up" checks
3. Update apiserver liveness probe to use HTTPS ports
4. Set `kube_api_anonymous_auth` to true to allow liveness probe to hit apiserver's /healthz over HTTPS (livenessProbes can't use client cert/key unfortunately)
5. RBAC has to be enabled. Anonymous requests are in the `system:unauthenticated` group which is granted access to /healthz by one of RBAC's default ClusterRoleBindings. An equivalent ABAC rule could allow this as well.

Changes 1 and 2 should work for everyone, but 3, 4, and 5 require new coupling of currently independent configuration settings. So I also added a new settings check.

Options:

1. The problem goes away if you have both anonymous-auth and RBAC enabled. This is how kubeadm does it. This may be the best way to go since RBAC is already on by default but anonymous auth is not.
2. Include conditional templates to set a different liveness probe for possible combinations of `kube_apiserver_insecure_port = 0`, RBAC, and `kube_api_anonymous_auth` (won't be possible to cover every case without a guaranteed authorizer for the secure port)
3. Use basic auth headers for the liveness probe (I really don't like this, it adds a new dependency on basic auth which I'd also like to leave independently configurable, and it requires encoded passwords in the apiserver manifest)

Option 1 seems like the clear winner to me, but is there a reason we wouldn't want anonymous-auth on by default? The apiserver binary defaults anonymous-auth to true, but kubespray's default was false.
2017-11-06 14:01:10 -06:00
Stanislav Makar
33adb334cd Fix openstack tenant id variable name (#1932) 2017-11-05 08:40:41 +00:00
Günther Grill
0195725563 Workaround ansible bug where access var via dict doesn't get real value (#1912)
* Change deprecated vagrant ansible flag 'sudo' to 'become'

* Workaround ansible bug where access var via dict doesn't get real value

When accessing a variable via it's name "{{ foo }}" its value is
retrieved. But when the variable value is retrieved via the vars-dict
"{{ vars['foo'] }}" this doesn't resolve the expression of the variable
any more due to a bug. So e.g. a expression foo="{{ 1 == 1 }}" isn't
longer resolved but just returned as string "1 == 1".

* Make file yamllint complient
2017-11-03 07:11:14 +00:00
Matthew Mosesohn
3e3787de15 Fix local volume provisioner mount point for rkt 2017-11-02 09:45:26 +00:00
Spencer Smith
b27453d8d8 improved proxy support 2017-10-30 11:42:14 -04:00
Spencer Smith
591941bd39
Merge pull request #1884 from abelgana/master
Sysctl reload if needed after IP forward enabling
2017-10-27 15:12:08 -04:00
mkrasilnikov
2c7c956be9 Disable swap in vagrant vms 2017-10-27 19:57:54 +03:00
abelgana
d9160f19c0 Sysctl reload if needed after IP forward enabling
Add reload yes to reload sysctl if the value of net.ipv4.ip_forward changes.

- name: Enable ip forwarding
  sysctl:
    sysctl_file: "{{sysctl_file_path}}"
    name: net.ipv4.ip_forward
    value: 1
    state: present
    reload: yes
  tags:
    - bootstrap-os
2017-10-26 13:06:21 -04:00
Matthew Mosesohn
0b4fcc83bd Fix up warnings and deprecations (#1848) 2017-10-20 08:25:57 +01:00
pmontanari
20d80311f0 Update main.yml (#1822)
* Update main.yml

Needs to set up resolv.conf before updating Yum cache otherwise no name resolution available (resolv.conf empty).

* Update main.yml

Removing trailing spaces
2017-10-18 11:42:00 +01:00
Tennis Smith
54320c5b09 set to 3 digit version number (#1817) 2017-10-17 11:14:29 +01:00
Jason Brooks
f2235be1d3 Add support for fedora atomic host (#1779)
* don't try to install this rpm on fedora atomic

* add docker 1.13.1 for fedora

* built-in docker unit file is sufficient, as tested on both fedora and centos atomic
2017-10-16 08:03:33 +01:00
Vijay Katam
27ed73e3e3 Rename dns_server, add var for selinux. (#1572)
* Rename dns_server to dnsmasq_dns_server so that it includes role prefix
as the var name is generic and conflicts when integrating with existing ansible automation.
*  Enable selinux state to be configurable with new var preinstall_selinux_state
2017-10-11 20:40:21 +01:00
Matthew Mosesohn
eb0dcf6063 Improve proxy (#1771)
* Set no_proxy to all local ips

* Use proxy settings on all necessary tasks
2017-10-11 19:47:27 +01:00
ant31
1be4c1935a Fix bool check assert 2017-10-06 17:02:38 +00:00
Aivars Sterns
9c86da1403 Normalize tags in all places to prepare for tag fixing in future (#1739) 2017-10-05 08:43:04 +01:00
Matthew Mosesohn
a56738324a Move set_facts to kubespray-defaults defaults
These facts can be generated in defaults with a performance
boost.

Also cleaned up duplicate etcd var names.
2017-10-04 14:02:47 +01:00
Peter Slijkhuis
371fa51e82 Make installation of EPEL optional (#1721) 2017-09-29 13:44:29 +01:00
Matthew Mosesohn
25dd3d476a Fix error for azure+calico assert (#1717)
Fixes #1716
2017-09-29 08:17:18 +01:00
Matthew Mosesohn
327ed157ef Verify valid settings before deploy (#1705)
Also fix yaml lint issues

Fixes #1703
2017-09-27 14:47:47 +01:00
Deni Bertovic
64740249ab Adds tags for asserts (#1639) 2017-09-25 08:41:03 +01:00
Brad Beam
aaa27d0a34 Adding quotes around parameters in cloud_config (#1664)
This is to help support escapes and special characters
2017-09-16 08:43:47 +01:00
Kevin Lefevre
9302ce0036 Enhanced OpenStack cloud provider (#1627)
- Enable Cinder API version for block storage
- Enable floating IP for LBaaS
2017-09-16 08:43:24 +01:00
Matthew Mosesohn
6744726089 kubeadm support (#1631)
* kubeadm support

* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job

* change ci boolean vars to json format

* fixup

* Update create-gce.yml

* Update create-gce.yml

* Update create-gce.yml
2017-09-13 19:00:51 +01:00
Matthew Mosesohn
75b13caf0b Fix kube-apiserver status checks when changing insecure bind addr (#1633) 2017-09-09 23:41:48 +03:00
Matthew Mosesohn
5d99fa0940 Purge old upgrade hooks and unused tasks (#1641) 2017-09-09 23:41:20 +03:00
Matthew Mosesohn
76b72338da Add CNI config for rkt kubelet (#1579) 2017-08-28 21:11:01 +03:00
Brad Beam
8b151d12b9 Adding yamllinter to ci steps (#1556)
* Adding yaml linter to ci check

* Minor linting fixes from yamllint

* Changing CI to install python pkgs from requirements.txt

- adding in a secondary requirements.txt for tests
- moving yamllint to tests requirements
2017-08-24 12:09:52 +03:00
Vijay Katam
97031f9133 Make epel-release install configurable (#1497) 2017-08-20 14:03:10 +03:00
Kevin Lefevre
65a9772adf Add OpenStack LBaaS support (#1506) 2017-08-20 13:59:15 +03:00
Brad Beam
383d582b47 Merge pull request #1382 from jwfang/rbac
basic rbac support
2017-08-07 08:01:51 -05:00
John Ko
018b5039e7 set loadbalancer_apiserver_localhost default true
to match this https://github.com/kubernetes-incubator/kubespray/blob/master/roles/kubernetes/node/tasks/main.yml#L20
and the documented behaviour in HA docs 
related to #1456
@rsmitty
2017-07-20 10:27:05 -04:00
jwfang
092bf07cbf basic rbac support 2017-07-17 19:29:59 +08:00
Martin Joehren
c2b3920b50 added flag for not populating inventory entries to etc hosts file 2017-06-30 16:41:03 +00:00
Spencer Smith
8203383c03 rename almost all mentions of kargo 2017-06-16 13:25:46 -04:00
xuhuilong
71dabf9fb3 fix curl get calico status error ( error in tls version) :https://bugzilla.redhat.com/show_bug.cgi?id=1272504 2017-05-15 08:12:26 -04:00
Sergii Golovatiuk
674b71b535 Ansible 2.3 support
- Fix when clauses in various places
- Update requirements.txt
- Fix README.md

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-26 15:22:10 +02:00
Spencer Smith
88b5065e7d fix stray 'in' and break into multiple lines for clarity 2017-04-20 09:53:01 -04:00
Spencer Smith
b690008192 allow for correct aws default resolver 2017-04-20 09:32:03 -04:00
Sergii Golovatiuk
01dc6b2f0e Add aws to default_resolver
When VPC is used, external DNS might not be available. This patch change
behavior to use metadata service instead of external DNS when
upstream_dns_servers is not specified.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-20 11:47:19 +02:00
Sergii Golovatiuk
e796cdbb27 Fix restart kube-controller (#1242)
kubernetesUnitPrefix was changed to k8s_* in 1.5. This patch reflects
this change in kargo
2017-04-20 11:26:01 +03:00
Matthew Mosesohn
ff2fb9196f Fix flannel for 1.6 and apply fixes to enable containerized kubelet 2017-04-06 10:06:21 +04:00
Matthew Mosesohn
a29182a010 Restart kubelet when updating /etc/resolv.conf on all k8s nodes 2017-04-04 20:43:47 +03:00
Matthew Mosesohn
b7ab80e8ea Merge pull request #1149 from mattymo/centos-retries
Retry yum/apt/rpm download commands
2017-03-18 11:12:36 +03:00
Matthew Mosesohn
7760c3e4aa Retry yum/apt/rpm download commands, fix succeeded filter 2017-03-17 18:56:26 +03:00
Matthew Mosesohn
a52064184e Condense resolvconf sources before starting loop 2017-03-17 13:06:56 +03:00
Matthew Mosesohn
b0830f0cd7 Merge pull request #1087 from bradbeam/openstack
Adding openstack domain id
2017-03-16 17:53:14 +03:00