* Allow the eventRecordQPS setting to be set.
The eventRecordQPS parameter controls rate limiting for event recording. When zero, unlimited events can cause denial-of-service situations. For my situation, I don't need more than a setting of "5". This change allows me to configure the setting before creating the cluster.
* Allow the eventRecordQPS setting to be set.
The default settings (see types.go) is five. So, this change does not affect the cluster provisioning. However, it does allow for the setting to be changed.
* Enable Kata Containers for CRI-O runtime
Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'
* Set manage_ns_lifecycle=true when KataContainers is enabed
* Add preinstall check for katacontainers
Signed-off-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
Command line flags aren't added to kube-proxy which results in missing
feature gates set in this component. Add appropriate setting to
ConfigMap instead.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
'ansible.vars.hostvars.HostVarsVars object' has no attribute 'kubeadm_upload_cert'
kubeadm_upload_cert will never be found as a hostvar for the first
master since the task is executed for a worker.
Fix by executing the upload task for the first master and register
the needed key. After that, workers can read hostvars for the master
Var kubeadm_etcd_refresh_cert_key removed since it no longer has
any use.
* Added option to force apiserver and respective client certificate to be regenerated without necessarily needing to bump the K8S cluster version
* Removed extra blank line
Handlers with the same name (Kubeadm | restart kubelet) leads to incorrect playbook execution. As a result, after completing the tasks, kubelet does not restart. This PR fix this behavior
After upgrading to newer Kubernetes(v1.17 at least), kubectl command
shows the following warning message:
WARNING: Kubernetes configuration file is group-readable.
This is insecure. Location: /home/foo/.kube/config
The kubeconfig was copied from {{ artifacts_dir }}/admin.conf with
kubeconfig_localhost feature. It is better to set valid file mode
at getting it on Kubespray.
When stopping at the check of "Stop if ip var does not match local ips"
the error message is like:
fatal: [single-k8s]: FAILED! => {
"assertion": "ip in ansible_all_ipv4_addresses",
"changed": false,
"evaluated_to": false,
"msg": "Assertion failed"
}
That doesn't contain actual IP addresses and it is difficult to understand
what was wrong. This adds the error message which contain actual IP addresses
to investigate the issue if happens.
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Fix reserved memory unit in kubelet configuration
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* Move systemReserved default values from template
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* remove podman cni plugin
* configure networkamanger global dns
* allow installation of python3-libselinux by disabling update repo temporary
* remove ipv4 section because it is not a valid configuration
Removes these startup warnings:
Warning: For remote container runtime, --pod-infra-container-image is ignored in kubelet, which should be set in that remote runtime instead
Using "/var/run/crio/crio.sock" as endpoint is deprecated, please consider using full url format "unix:///var/run/crio/crio.sock".
* Use proper openssl command to differentiate between host and ip in current certificate check
* fixup! Use proper openssl command to differentiate between host and ip in current certificate check
* Fix kubelet cgroup driver detection for crio
Remove fact standalone_kubelet since it is not used
* Fix yamllint complaints of roles/kubernetes/node/tasks/facts.yml
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* MINOR: Check kernel version before enable modprobe nf_conntrack
* CLEANUP: no more need to ignore error of this task
* MINOR: Fixing yaml and ansible lint error - remove trailling-space
If the special parameter "$@" is not quoted, the following command will not work:
./kubectl.sh patch storageclass my-storage-class -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'
* fix(kubelet): exec notify restart kubelet service when kube-config.yml changed
* Revert "refactor(kubelet handler): change task name("reload kubelet") this is misleading"
This reverts commit 8f5d29560802c7c997293adb1ce9f84d3b20b6cb.
* fix(handlers,kubelet): setting right notify task name
* etcd: etcd-events doesn't depend on etcd_cluster_setup
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: remove condition already present on include_tasks
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: fix scaling up
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use *access_addresses, do not delegate to etcd[0]
We want to wait for the full cluster to be healthy,
so use all the cluster addresses
Also we should be able to run the playbook when etcd[0] is down
(not tested), so do not delegate to etcd[0]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use failed_when for health check
unhealthy cluster is expected on first run, so use failed_when
instead of ignore_errors to remove scary red messages
Also use run_once
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/preinstall: ensure ansible_fqdn is up to date after changing /etc/hosts
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/master: regenerate apiserver cert if needed
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes-sigs-kubespray #5824
Added support nodes which are part of Virtual Machine Scale Sets(VMSS)
* kubernetes-sigs-kubespray #5824
* kubernetes-sigs-kubespray #5824
Added comments and updatetd azure docs.
* kubernetes-sigs-kubespray #5824
Added supported values comments for "azure_vmtype" in azure.yml
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
- This solves issue #5721 & #5713 (dupes)
- Provide a cleaner default usage pattern for the download role
around etcd that supports 'host' and 'docker' properly
- Extract the 'etcdctl' as a separate task install piece and reuse it where
appropriate
- Update the kubeadm-etcd task to reflect the above change
* fedora coreos support
- bootstrap and new fact for
* fedora coreos support
- fix bootstrap condition
* fedora coreos support
- allow customize packages for fedora coreos bootstrap
* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos
* fedora coreos support
- handle all ostree like os in same way
* fedora coreos support
- handle all ostree like os in same way for crio
* fedora coreos support
- add fcos documentations
refs #5277
As the issue describes, when no external or local load-balanced is used,
kube-proxy won't be able to contact apiserver at 127.0.0.1. So the
config map should be left as is.
* download file
* download containers
* fix push image to nodes
* pull if none image on host
* fix
* improve docker image tag checks.
do not pull already cached images
* rebase fix merge conflict
* add support download_run_once when upgrade and scale cluster
add some test with download_run_once
* set default values to temp flag for every download cycle
* add save,load abilty for containerd and crio when download_run_once=true
* return redefine image save/load command to set_docker_image_facts.yml
* move set command to set_container_facts
* ctr in containerd_bin_dir
* fix order of ctr image export arguments
* temporary disable download_run_once for containerd and crio
due https://github.com/containerd/containerd/issues/4075
* remove unused files
* fix strict yaml linter warning and errors
* refactor logical conditions to pull and cache container images
* remove comment due lint check
* document role
* remove image_load_on_localhost, because cached images are always loaded to docker on remote sites
* remove XXX from debug output
* Run 'container-engine' after drain.
Move possibly disruptive role 'container-engine' to run after the node
is drained.
As that role have to be run on non-cluster nodes as well (etcd and
calico-rr), and those nodes are not drained, add play for that case.
* Check if api is up before upgrade.
If container engine is restarted in previous role, api controller can
take some time to start. This check ensures api is up before upgrade.
* Fix incorrect assertion comparison for kube_network_node_prefix
* Ignore assertion comparison for kube_network_node_prefix when using calico
* Adding more var docs description for kube_network_node_prefix
* Fixing trailing whitespaces
* External OpenStack Cloud Controller Manager implementation
* Adding controller image tag
* Minor fixes
* Restructuring the external cloud controller to work with KubeADM
* Introduce kubelet_config_extra_args and kubelet_node_config_extra_args to pass params to kubelet via YAML config
* kubelet_config_extra_args is not the alternative
When running with serial != 100%, like upgrade_cluster.yml, we need to apply this fixup each time
Problem was introduced in 05dc2b3a09
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Resolves issue where kubectl cache of <v1.16 api schema
interferes with interacting with daemonsets and deployments.
Change-Id: I63b7046958f2008eb144b6da0004c598f945e0ae
* Fix python3-libselinux installation for RHEL/CentOS 8
In bootstrap-centos.yml we haven't gathered the facts,
so #5127 couldn't work
Minimum ansible version to run kubespray is 2.7.8,
so ansible_distribution_major_version is defined an there is no need to default it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Restart NetworkManager for RHEL/CentOS 8
network.service doesn't exist anymore
# systemctl status network
Unit network.service could not be found.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add module_hotfixes=True to docker / containerd yum repo config
https://bugzilla.redhat.com/show_bug.cgi?id=1734081https://bugzilla.redhat.com/show_bug.cgi?id=1756473
Without this setting you end up with the following error:
# yum install docker-ce
Failed to set locale, defaulting to C
Last metadata expiration check: 0:03:21 ago on Thu Sep 26 22:00:05 2019.
Error:
Problem: package docker-ce-3:19.03.2-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed
- cannot install the best candidate for the job
- package containerd.io-1.2.2-3.3.el7.x86_64 is excluded
- package containerd.io-1.2.2-3.el7.x86_64 is excluded
- package containerd.io-1.2.4-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.5-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.6-3.3.el7.x86_64 is excluded
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
This fixes the scenario where masters are upgraded one at a time
and coredns gets improperly scaled back up to 2 replicas.
Change-Id: I7cc9283f40efcfd61b5813c89a5805c95d901567
Kubespray Pull Request #5084 (https://github.com/kubernetes-sigs/kubespray/pull/5084) caused more problems than it solved due to limitations with the synchronize module. See comments on Kubespray Issues #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059) and #5116 (https://github.com/kubernetes-sigs/kubespray/issues/5116). Details from Ansible documentation: "Currently, synchronize is limited to elevating permissions via passwordless sudo. This is because rsync itself is connecting to the remote machine and rsync doesn’t give us a way to pass sudo credentials in. ... Currently there are only a few connection types which support synchronize (ssh, paramiko, local, and docker) because a sync strategy has been determined for those connection types. Note that the connection for these must not need a password as rsync itself is making the connection and rsync does not provide us a way to pass a password to the connection. ..." Thus, reverting Pull Request #5084.
When using cluster.yml or scale.yml to add/scale nodes in the existing
k8s cluster, the `kubeadm init` wouldn't run. As a result, kube-proxy
wouldn't be created, and therefore the kube-proxy deletion task would
fail, e.g. in the case where kube-router is used and "kube_proxy_remove"
is set to true. As a workaround, add ignore_errors to the kube-proxy
deletion task.
The script is not usable unless you are in the '.vagrant/provisioners/ansible/inventory/artifacts' folder.
This update makes this usable from anywhere.
Cleaned up deprecated APIs:
apps/v1beta1
apps/v1beta2
extensions/v1beta1 for ds,deploy,rs
Add workaround for deploying helm using incompatible
deployment manifest.
Change-Id: I78b36741348f47a999df3841ee63cf4e6f377830
* Use python3-libselinux on RHEL8/Centos8
* The fact ansible_facts.distribution_major_version is not present on older Ansible version.
Default it to 0 in when not present and use libselinux-python as package to get current
default behaviour.
Fix for Kubespray Issue #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059). There is a known issue with the 'fetch' module that will sometimes lead to it failing with a memory error. See ansible/ansible#11702 (https://github.com/ansible/ansible/issues/11702). I encountered this issue with the "Copy kubectl binary to ansible host" task in kubespray/roles/kubernetes/client/tasks/main.yml, and it caused my entire deployment to error out (see "Output of ansible run" above). Replacing 'fetch' with 'synchronize' fixes this issue.
Fixes situation when using manual mode because it
tries to download coredns v1.3.1 from the same
image repository where kubernetes images are
downloaded from.
Change-Id: Ibbec8a72c8162ce8befa74e2013a268737ea5f8a
* Refactor calico-rr to run in k8s cluster with taint
Change-Id: I75a3169ff5b36ce8302fc7ef1c32d3eb697b5afa
* add preinstall checks
* rework calico/rr role
Change-Id: I2f0a7e6cb77cf91ad4a615923680760d2e5d9ca8
* add empty calico-rr group
Change-Id: I006c0a60db9b72d02245bf8fdfabcf982144a5ad
* Enable containerd to deploy vanilla containerd package
Fixes kubeadm references to CRI socket for containerd
Fixes download role cache feature to work with containerd
Change-Id: I2ab8f0031107e2f0d1a85c39b4beb66f08509a01
* use containerd for flannel-addons job
Change-Id: Ied375c7d65e64a625ffbd995ff16f2374067dee6
* add containerd vars
Change-Id: Ib9a8a04e501c481a86235413cbec63f3672baf91
* fixup vars
Change-Id: Ibea64e4b18405a578b52a13da100384582aa24c2
* more fixes
* fix rh repo
Change-Id: I00575a77cfb7b81d6095db5d918a52023c8f13ba
* Adjust helm host install for containerd
* Use K8s 1.15
* Use Kubernetes 1.15 and use kubeadm.k8s.io/v1beta2 for
InitConfiguration.
* bump to v1.15.0
* Remove k8s 1.13 checksums.
* Update README kubernetes version 1.15.0.
* Update metrics server 0.3.3 for k8s 1.15
* Remove less than k8s 1.14 related code
* Use kubeadm with --upload-certs instead of --experimental-upload-certs due to depricate
* Update dnsautoscaler 1.6.0
* Skip certificateKey if it's not defined
* Add kubeadm-conftolplane.v2beta2 for k8s 1.15 or later
* Support kubeadm control plane for k8s 1.15
* Update sonobuoy version 0.15.0 for k8s 1.15
* Add limited containerd support
Containerd support for Ubuntu + Calico
* Added CRI-O support for ubuntu
* containerd support.
* Reset containerd support.
* fix lint.
* implemented feedback
* Change task name cri xx instead of cri-o in reset task and timeout condition.
* set crictl to fixed version
* Use docker-ce's container.io package for containerd.
* Add check containerd is installable or not.
* Avoid stop docker when use containerd and optimize retry for reset.
* Add config.toml.
* Fixed containerd for kubelet.env.
* Merge PR #4629
* Remove unused ubuntu variable for containerd
* Polish code for containerd and cri-o
* Refactoring cri socket configuration.
* Configurable conmon.
* Remove unused crictl/runc download
* Now crictl and runc is downloaded by common crictl.yml.
* fixed yamllint error
* Fixed brokenfiles by conflict.
* Remove commented line in config.toml
* Remove readded v1.12.x version
* Fixed broken set_docker_image_facts
* Fix yamllint errors.
* Remove unused apt source
* Fix crictl could not be installed
* Add containerd config from skolekonov's PR #4601
* add macvlan cni to kubespray
* macvlan: lint yaml files and fix sample config file
* macvlan: add OWNERS file
* add macvlan to README
* macvlan : CI first shoot
* macvlan : CI add full masquerade
* delegate retrive pod cidr to master only
* macvlan: add config for CI
* macvlan: add netchecker deployment
kubernetes/master role defines this value as an empty string
when using a cloud provider, not undefined. The check was updated
accordingly.
Change-Id: I58dc31ef4fd568a717a6753eb89ca687933018ae
* Require minimum version of Kubernetes
* Remove checksums for kubernetes version 1.12
* Add kube_version to precheck output and add min required version to README
* Fix merge
* Fix defaults
* Fix typo in precheck
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Add support for arm images for hyperkube, kubeadm and cni_binary
* Add dummy etcd checksum for arm
This commit adds dummy etcd checksum for arm to avoid "no attribute" error
during setup.
* Add etcd host assert check
* Add 1.13.4 checksums of kubeadm and hyperkube for arm
* Update checksums of kubeadm and hyperkube for arm
* Add dummy checksums for calicoctl_binary_checksums dict
* disable gather_facts because it causes tests to fail
* Remove architecture check for etcd, due to unable to run tests
* Disable kube_api_anonymous_auth by default to secure the setup
* Disable metrics-server in addons. Health endpoint is slow and unstable
* Fix anonymous-auth missing in configuration
* Cleanup a bit
* Fix kube anon auth
* Download to delegate and sync files when download_run_once
* Fail on error after saving container image
* Do not set changed status when downloaded container was up to date
* Only sync containers when they are actually required
Previously, non-required images (pull_required=false as
image existed on target host) were synced to the target
hosts. This failed as the image was not downloaded to
the download_delegate and hence was not available for
syncing.
* Sync containers when only missing on some hosts
* Consider images with multiple repo tags
* Enable kubeadm images pull/syncing with download_delegate
* Use kubeadm images list to pull/sync
'kubeadm config images pull' is replaced by collecting the images
list with 'kubeadm config images list' and using the commonly
used method of pull/syncing the images.
* Ensure containers are downloaded and synced for all hosts
* Fix download/syncing when download_delegate is a kubernetes host
add the support of the folling property in azure-credential-check.yml
- azure_loadbalancer_sku: Sku of Load Balancer and Public IP. Candidate values are: basic and standard.
- azure_exclude_master_from_standard_lb: excludes master nodes from standard load balancer.
- azure_disable_outbound_snat: disables the outbound SNAT for public load balancer rules
- useInstanceMetadata: Use instance metadata service where possible
- azure_primary_availability_set: (Optional) The name of the availability set that should be used as the load balancer backend
We don't need to support upgrades from 2 year old installs,
just from the last major version.
Also changed most retried tasks to 1s delay instead of longer.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
The Stateless ClearLinux feature[1] requires the creation of folders
in /etc folder. This change ensure the existence of the
/etc/bash_completion.d/ folder for ClearLinux Distribution.
[1] https://clearlinux.org/features/stateless
This will fix error: error converting YAML to JSON: yaml: line 36: mapping values are not allowed in this context
Signed-off-by: Abdulaziz AlMalki <almalki.a@gmail.com>
