Commit graph

1676 commits

Author SHA1 Message Date
Brad Beam
2a3dee5f90 Adding support for proxy w/ rkt kubelet 2017-02-14 08:09:49 -06:00
Matthew Mosesohn
c8f5cf9a99 Merge pull request #1019 from mattymo/issue1011
Update calico to v1.0.2
2017-02-14 14:01:25 +03:00
Matthew Mosesohn
68f441fbdb Merge pull request #1013 from mattymo/remove_masqerade_all
Disable kube_proxy_masquerade_all
2017-02-14 14:00:29 +03:00
Antoine Legrand
4b5f334878 Merge pull request #1027 from hvnsweeting/master
Multiples doc fixes
2017-02-14 11:39:22 +01:00
Hung Nguyen Viet
4cb20ca509 Highlight important action 2017-02-14 17:18:25 +07:00
Hung Nguyen Viet
e960a3b567 Fix typo 2017-02-14 17:18:22 +07:00
Antoine Legrand
1cd0d85cc1 Merge pull request #1025 from holser/bug/961
Install pip on Ubuntu
2017-02-14 10:31:42 +01:00
Matthew Mosesohn
73a8613e42 Merge pull request #1021 from holser/remove_deprecated
Replace always_run with check_mode
2017-02-14 11:25:58 +03:00
Matthew Mosesohn
f671ef5ad2 Merge pull request #1015 from holser/rkt_ssl_ca_dirs
Set ssl_ca_dirs for rkt based on fact
2017-02-14 11:25:17 +03:00
Sergii Golovatiuk
07416a329e Install pip on Ubuntu
- Refactor 'Check if bootstrap is needed' as ansible loop. This allows
  to add new elements easily without refactoring. Add pip to the list.
- Refactor 'Install python 2.x' task to run once if any of rc
  codes != 0. Actually, need_bootstrap is array of hashes, so map will
  allow to get single array of rc statuses. So if status is not zero it
  will be sorted and the last element will be get, converted to bool.

Closes: #961
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 19:35:13 +01:00
Antoine Legrand
f7f6cf9948 Merge pull request #1024 from holser/bug/961
Install pip on Ubuntu
2017-02-13 17:53:57 +01:00
Matthew Mosesohn
192fc13ff2 Merge pull request #1023 from mattymo/fix_dnsmasq_cleanup
Clean up dnsmasq purge task
2017-02-13 19:50:01 +03:00
Vladimir Rutsky
fff8780a51 set "check_mode: no" for read-only "shell" steps that registers result
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).

Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
2017-02-13 18:53:41 +03:00
Sergii Golovatiuk
4b7398f29c Install pip on Ubuntu
Closes: #961
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 16:27:09 +01:00
Greg Althaus
932629cc38 When resolv.conf changes during host_resolvconf mode, we need to
restart the controller to get the new file configuration.
I'm not fond of this form and would like a better way, but this
seems to "work".
2017-02-13 09:20:02 -06:00
Antoine Legrand
ad67517ab1 Merge pull request #1022 from kubernetes-incubator/ant31-patch-1
Document gitlab-runner.sh
2017-02-13 15:40:34 +01:00
Matthew Mosesohn
2e12ebb9cb Clean up dnsmasq purge task 2017-02-13 17:30:15 +03:00
Antoine Legrand
426995fa36 Document gitlab-runner.sh 2017-02-13 15:04:35 +01:00
Sergii Golovatiuk
959517aa62 Replace always_run with check_mode
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
2017-02-13 15:00:56 +01:00
Matthew Mosesohn
8afce340c4 Update calico to v1.0.2
Also calico-cni to v1.5.6, calico-policy to v0.5.2

Fixes: #1011
2017-02-13 15:39:25 +03:00
Sergii Golovatiuk
5494d608e5 Set ssl_ca_dirs for rkt based on fact
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.

Closes: #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 13:28:29 +01:00
Matthew Mosesohn
896307b692 Merge pull request #988 from mattymo/feat/rolling3
Add CI cases for testing upgrade from v2.0.1 release
2017-02-10 18:09:43 +03:00
Matthew Mosesohn
543848c41e Merge pull request #983 from vwfs/centos_kernel_upgrade
Add kernel upgrade for CentOS
2017-02-10 14:40:27 +03:00
Antoine Legrand
6bd180eadf Merge pull request #1009 from mattymo/dnsmasq_updates
Enable reset of dnsmasq if manifest or config changes
2017-02-10 11:43:09 +01:00
Matthew Mosesohn
ccd865c564 fixup upgrades for canal and weave 2017-02-10 13:27:41 +03:00
Matthew Mosesohn
21d648ad36 Disable kube_proxy_masquerade_all
Fixes #1012
2017-02-10 13:16:39 +03:00
Matthew Mosesohn
298847ffa3 Merge pull request #1010 from bogdando/fixes
Fix misleading HA docs
2017-02-10 13:01:29 +03:00
Bogdan Dobrelya
0ddcc74412 Merge pull request #1002 from code0x9/master
use ansible sysctl module for config ip forwarding
2017-02-10 10:40:18 +01:00
Bogdan Dobrelya
22cae3c361 Fix misleading HA docs
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-02-10 10:28:27 +01:00
Alexander Block
aeb12fdc10 Add kernel upgrade for CentOS 2017-02-10 09:29:12 +01:00
Matthew Mosesohn
cfe50795e2 Enable reset of dnsmasq if manifest or config changes 2017-02-10 10:40:07 +04:00
Matthew Mosesohn
14e10988fc Merge pull request #989 from holser/kubelet_remedy
Kubernetes Reliability Improvements
2017-02-10 09:29:29 +03:00
Matthew Mosesohn
729bf56910 Merge pull request #1004 from galthaus/kubelet-load-modules
Allow kubelet to load kernel modules
2017-02-10 09:28:16 +03:00
Matthew Mosesohn
c4594022ca Add CI cases for testing upgrade from v2.0.1 release
These are manual trigger jobs, but should be run if any PR
impacts upgrades.
2017-02-10 10:20:58 +04:00
Matthew Mosesohn
9514f32135 Merge pull request #1006 from mattymo/fix_weave_upgrade
Enable weave upgrade from previous versions
2017-02-10 09:03:49 +03:00
Antoine Legrand
8898dcda22 Merge pull request #1001 from idcrook/kargo-issue-1000-efk-enable
removed explicit role for efk in cluster.yml
2017-02-10 03:03:18 +01:00
Sergii Golovatiuk
c0d2cca45d Kubernetes Reliability Improvements
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
  chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
  node-monitor-period, pod-eviction-timeout for Kubernetes controller
  manager
- Add Kubernetes Relaibility Documentation with recomendations for
  various scenarios.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-09 23:54:08 +01:00
Matthew Mosesohn
e0cfea02bf Enable weave upgrade from previous versions
Raise readiness probe initial time to 60 (was 30)
2017-02-09 21:39:31 +03:00
Matthew Mosesohn
372c5beadd Merge pull request #1005 from rutsky/patch-2
fix kube_apiserver_ip/kube_apiserver_port description
2017-02-09 21:08:15 +03:00
Vladimir Rutsky
c1c94c5d21 fix kube_apiserver_ip/kube_apiserver_port description 2017-02-09 21:47:36 +04:00
Matthew Mosesohn
b68afe7efa Merge pull request #998 from mattymo/fix_upgrade_daemonsets
Fix upgrade for all daemonset type resources
2017-02-09 20:02:21 +03:00
Greg Althaus
d6f1f0c88b Make kubelet_load_modules always present but false.
Update code and docs for that assumption.
2017-02-09 10:25:44 -06:00
Greg Althaus
8f00a07bf6 Due to the nsenter and other reworks, it appears that
kubelet lost the ability to load kernel modules.  This
puts that back by adding the lib/modules mount to kubelet.

The new variable kubelet_load_modules can be set to true
to enable this item.  It is OFF by default.
2017-02-09 10:02:26 -06:00
Matthew Mosesohn
b5cfeca474 Merge pull request #999 from holser/decrease_weave_ram_limits
Lower weave RAM settings.
2017-02-09 13:19:12 +03:00
Mark Lee
331957c9a8 follow sysctl.conf file symlink if linked 2017-02-09 18:16:52 +09:00
Mark Lee
224e6acb3a use ansible sysctl module for config ip forwarding 2017-02-09 17:28:44 +09:00
Bogdan Dobrelya
93c562b1bb Merge pull request #902 from insequent/master
Adding vault role
2017-02-09 09:24:52 +01:00
Bogdan Dobrelya
d0f4ab3129 Merge pull request #993 from code0x9/master
enable proxy support on docker repository
2017-02-09 09:21:01 +01:00
David Crook
395fee8dbd removed explicit role for efk in cluster.yml 2017-02-08 20:48:28 -07:00
Antoine Legrand
35a7ad55d0 Merge pull request #986 from vwfs/dnsmasq_system_nameservers
Also add the system nameservers to upstream servers in dnsmasq
2017-02-08 23:21:54 +01:00