Commit graph

89 commits

Author SHA1 Message Date
Steven Hardy
d39a88d63f Allow setting --bind-address for apiserver hyperkube (#1985)
* Allow setting --bind-address for apiserver hyperkube

This is required if you wish to configure a loadbalancer (e.g haproxy)
running on the master nodes without choosing a different port for the
vip from that used by the API - in this case you need the API to bind to
a specific interface, then haproxy can bind the same port on the VIP:

root@overcloud-controller-0 ~]# netstat -taupen | grep 6443
tcp        0      0 192.168.24.6:6443       0.0.0.0:*               LISTEN      0          680613     134504/haproxy
tcp        0      0 192.168.24.16:6443      0.0.0.0:*               LISTEN      0          653329     131423/hyperkube
tcp        0      0 192.168.24.16:6443      192.168.24.16:58404     ESTABLISHED 0          652991     131423/hyperkube
tcp        0      0 192.168.24.16:58404     192.168.24.16:6443      ESTABLISHED 0          652986     131423/hyperkube

This can be achieved e.g via:

kube_apiserver_bind_address: 192.168.24.16

* Address code review feedback

* Update kube-apiserver.manifest.j2
2017-11-29 15:24:02 +00:00
Matthew Mosesohn
f9b68a5d17
Revert "Support for disabling apiserver insecure port" (#1974) 2017-11-14 13:41:28 +00:00
Chad Swenson
0c7e1889e4 Support for disabling apiserver insecure port
This allows `kube_apiserver_insecure_port` to be set to 0 (disabled). It's working, but so far I have had to:

1. Make the `uri` module "Wait for apiserver up" checks use `kube_apiserver_port` (HTTPS)
2. Add apiserver client cert/key to the "Wait for apiserver up" checks
3. Update apiserver liveness probe to use HTTPS ports
4. Set `kube_api_anonymous_auth` to true to allow liveness probe to hit apiserver's /healthz over HTTPS (livenessProbes can't use client cert/key unfortunately)
5. RBAC has to be enabled. Anonymous requests are in the `system:unauthenticated` group which is granted access to /healthz by one of RBAC's default ClusterRoleBindings. An equivalent ABAC rule could allow this as well.

Changes 1 and 2 should work for everyone, but 3, 4, and 5 require new coupling of currently independent configuration settings. So I also added a new settings check.

Options:

1. The problem goes away if you have both anonymous-auth and RBAC enabled. This is how kubeadm does it. This may be the best way to go since RBAC is already on by default but anonymous auth is not.
2. Include conditional templates to set a different liveness probe for possible combinations of `kube_apiserver_insecure_port = 0`, RBAC, and `kube_api_anonymous_auth` (won't be possible to cover every case without a guaranteed authorizer for the secure port)
3. Use basic auth headers for the liveness probe (I really don't like this, it adds a new dependency on basic auth which I'd also like to leave independently configurable, and it requires encoded passwords in the apiserver manifest)

Option 1 seems like the clear winner to me, but is there a reason we wouldn't want anonymous-auth on by default? The apiserver binary defaults anonymous-auth to true, but kubespray's default was false.
2017-11-06 14:01:10 -06:00
Spencer Smith
19962f6b6a fix indentation for master template (#1906) 2017-10-31 06:43:54 +00:00
Matthew Mosesohn
564de07963 fix indentation for network policy option 2017-10-27 14:56:22 +01:00
Matthew Mosesohn
b0f04d925a Update network policy setting for Kubernetes 1.8 (#1879)
It is now enabled by default in 1.8 with the api changed
to networking.k8s.io/v1 instead of extensions/v1beta1.
2017-10-26 15:35:26 +01:00
Jan Jungnickel
49dff97d9c Relabel controler-manager to kube-controller-manager (#1830)
Fixes #1129
2017-10-18 17:29:18 +01:00
Matthew Mosesohn
d487b2f927 Security best practice fixes (#1783)
* Disable basic and token auth by default

* Add recommended security params

* allow basic auth to fail in tests

* Enable TLS authentication for kubelet
2017-10-15 20:41:17 +01:00
Matthew Mosesohn
ef47a73382 Add new addon Istio (#1744)
* add istio addon

* add addons to a ci job
2017-10-13 15:42:54 +01:00
Matthew Mosesohn
a56738324a Move set_facts to kubespray-defaults defaults
These facts can be generated in defaults with a performance
boost.

Also cleaned up duplicate etcd var names.
2017-10-04 14:02:47 +01:00
Matthew Mosesohn
e42cb43ca5 add bootstrap for debian (#1726) 2017-10-03 08:30:45 +01:00
Julian Poschmann
8e1210f96e Fix cluster-network w/ prefix > 25 not possible with CNI (#1713) 2017-10-01 10:43:00 +01:00
Matthew Mosesohn
6744726089 kubeadm support (#1631)
* kubeadm support

* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job

* change ci boolean vars to json format

* fixup

* Update create-gce.yml

* Update create-gce.yml

* Update create-gce.yml
2017-09-13 19:00:51 +01:00
Brad Beam
8ae77e955e Adding in certificate serial numbers to manifests (#1392) 2017-09-01 09:02:23 +03:00
Brad Beam
7a98ad50b4 Fixing CA certificate locations for k8s components 2017-08-30 15:30:40 -05:00
Chad Swenson
a39e78d42d Initial version of Flannel using CNI (#1486)
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
2017-08-25 10:07:50 +03:00
Hassan Zamani
01ce09f343 Add feature_gates var for customizing Kubernetes feature gates (#1520) 2017-08-24 23:18:38 +03:00
jwfang
092bf07cbf basic rbac support 2017-07-17 19:29:59 +08:00
Gregory Storme
266ca9318d Use the kube_apiserver_insecure_port variable instead of static 8080 2017-06-12 09:20:59 +02:00
Spencer Smith
8203383c03 rename almost all mentions of kargo 2017-06-16 13:25:46 -04:00
Spencer Smith
01c0ab4f06 check if cloud_provider is defined 2017-05-31 08:24:24 -04:00
Spencer Smith
7e2aafcc76 add direct path for cert in AWS with RHEL family 2017-05-26 17:32:50 -04:00
Sergii Golovatiuk
d8aa2d0a9e Change DNS policy for kubernetes components
According to code apiserver, scheduler, controller-manager, proxy don't
use resolution of objects they created. It's not harmful to change
policy to have external resolver.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-20 11:22:57 +02:00
Spencer Smith
c3c9e955e5 Merge pull request #1232 from rsmitty/custom-flags
add ability for custom flags
2017-04-17 14:01:32 -04:00
Spencer Smith
72d5db92a8 remove stray spaces in templating 2017-04-17 12:24:24 -04:00
Spencer Smith
3f302c8d47 ensure spacing on string of flags 2017-04-17 12:13:39 -04:00
Spencer Smith
f9d4a1c1d8 update to safeguard against accidentally passing string instead of list 2017-04-17 11:09:34 -04:00
gbolo
49be805001
allow admission control plug-ins to be easily customized 2017-04-16 22:03:45 -04:00
Spencer Smith
94596388f7 add ability for custom flags 2017-04-14 17:33:04 -04:00
Sergii Golovatiuk
2670eefcd4 Refactoring resolv.conf
- Renaming templates for netchecker
- Add dnsPolicy: ClusterFirstWithHostNet to kube-proxy

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-05 09:28:01 +02:00
Sergii Golovatiuk
1cfe0beac0 Set ClusterFirstWithHostNet for Pods with hostnetwork: true
In kubernetes 1.6 ClusterFirstWithHostNet was added as an option. In
accordance to it kubelet will generate resolv.conf based on own
resolv.conf. However, this doesn't create 'options', thus the proper
solution requires some investigation.

This patch sets the same resolv.conf for kubelet as host

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-04-04 16:34:13 +02:00
Vladimir Rutsky
c4e57477fb replace non-breakable space with regular space
Non-brekable space is 0xc2 0xa0 byte sequence in UTF-8.

To find one:

    $ git grep -I -P '\xc2\xa0'

To replace with regular space:

    $ git grep -l -I -P '\xc2\xa0' | xargs sed -i 's/\xc2\xa0/ /g'

This commit doesn't include changes that will overlap with commit f1c59a91a1.
2017-03-23 00:25:01 +03:00
Aleksandr Didenko
3a39904011 Move calico-policy-controller into separate role
By default Calico CNI does not create any network access policies
or profiles if 'policy' is enabled in CNI config. And without any
policies/profiles network access to/from PODs is blocked.

K8s related policies are created by calico-policy-controller in
such case. So we need to start it as soon as possible, before any
real workloads.

This patch also fixes kube-api port in calico-policy-controller
yaml template.

Closes #1132
2017-03-17 11:21:52 +01:00
Vincent Schwarzer
026da060f2 Granular authentication Control
It is now possible to deactivate selected authentication methods
(basic auth, token auth) inside the cluster by adding
removing the required arguments to the Kube API Server and generating
the secrets accordingly.

The x509 authentification is currently not optional because disabling it
would affect the kubectl clients deployed on the master nodes.
2017-03-14 16:57:35 +01:00
Vincent Schwarzer
b075960e3b Added Support for OpenID Connect Authentication
To use OpenID Connect Authentication beside deploying an OpenID Connect
Identity Provider it is necesarry to pass additional arguments to the Kube API Server.
These required arguments were added to the kube apiserver manifest.
2017-03-06 12:40:35 +01:00
Antoine Legrand
85596c2610 Merge pull request #1045 from bradbeam/vsphere
Adding vsphere cloud provider support
2017-03-06 12:34:05 +01:00
Sergii Golovatiuk
295103adc0 Allow to specify etcd backend for kube-api
Kubernetes project is about to set etcdv3 as default storage engine in
1.6. This patch allows to specify particular backend for
kube-apiserver. User may force the option to etcdv3 for new environment.
At the same time if the environment uses v2 it will continue uses it
until user decides to upgrade to v3.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-28 17:13:22 +01:00
Brad Beam
dbf13290f5 Updating vsphere cloud provider support 2017-02-27 15:08:04 -06:00
Jan Jungnickel
df476b0088 Initial support for vsphere as cloud provider 2017-02-27 12:51:41 -06:00
Sergii Golovatiuk
c07d60bc90 Kubernetes Reliability Improvements
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
  chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
  node-monitor-period, pod-eviction-timeout for Kubernetes controller
  manager
- Add Kubernetes Relaibility Documentation with recomendations for
  various scenarios.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-09 23:54:08 +01:00
Matthew Mosesohn
fd30131dc2 Revert "Drop linux capabilities and rework users/groups" 2017-02-06 15:58:54 +03:00
Bogdan Dobrelya
cb2e5ac776 Drop linux capabilities and rework users/groups
* Drop linux capabilities for unprivileged containerized
  worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
  components' static manifests, etcd, calico-rr and k8s apps,
  like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
  supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
  networking containers though).
* Grant the kube and netplug users read access for etcd certs via
  the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
  and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
  for control plane.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-20 08:50:42 +01:00
Matthew Mosesohn
80703010bd Use only one certificate for all apiservers
https://github.com/kubernetes/kubernetes/issues/25063
2017-01-13 14:03:20 +03:00
Matthew Mosesohn
3f274115b0 Generate individual certificates for k8s hosts 2017-01-11 12:58:07 +03:00
Bogdan Dobrelya
a56d9de502 Systemd units, limits, and bin path fixes
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
  systemd limits due to the lack of consensus in the kernel community
  requires out-of-tree kernel patches.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-28 15:49:42 +01:00
Matthew Mosesohn
ad796d188d Individual etcd ssl certs
Includes hooks for triggering calico, kubelet, and kube-apiserver restarts
if etcd certs changed.
2016-12-22 13:31:11 +03:00
Smaine Kahlouch
29874baf8a Merge pull request #708 from vwfs/cloud_network
Add support for cloud-provider based networking
2016-12-14 16:23:20 +01:00
Alexander Block
d20d5e648f Add pseudo network plugin called "cloud" to use cloud provider for network
Allow to let the cloud provider configure proper routing for nodes.
2016-12-13 17:30:10 +01:00
Antoine Legrand
26e3142c95 Merge branch 'master' into standalone_kubelet 2016-12-13 17:26:21 +01:00
Alexander Block
444b1dafdc Pass --anonymous-auth to apiserver
Fixes #732
2016-12-13 17:06:53 +01:00