Commit graph

56 commits

Author SHA1 Message Date
Sergey
e60b9f796e
add calico VXLAN mode, update docs and vars in sample inventory (#5731)
* calico VXLAN mode

* check vars if calico backend defined
2020-03-12 01:20:37 -07:00
Chad Swenson
a15a0b5eb9
Make calico iptables lock timeout configurable (#5658)
Adds `calico_iptables_lock_timeout_secs` variable to calico DS yaml.
2020-02-19 02:28:25 -08:00
Matthew Mosesohn
b35b816287 Raise typha max connections to 300 (#5527)
Raises limit from 100 to 300 because the default is far too low
and the pod can handle 300 with the given resources.

Change-Id: Ib1eec10da3d09d198933fcfe87291587e58d7cdb
2020-01-10 00:24:33 -08:00
Etienne Champetier
2c2ffa846c Calico: update to 3.11.1, allow to configure calico_iptables_backend (#5514)
I've tested this update by deploying a containerd / etcd cluster on top CentOS7,
MetalLB + NGINX Ingress. Upgrade using upgrade-cluster.yml

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
2020-01-08 02:27:40 -08:00
Matthew Mosesohn
a1fff30bd9 Generate TLS certs for calico typha (#5258)
* Generate TLS certs for calico typha

Change-Id: I3883f49c124c52d0fc5b900ca2b44e4e2ed0d707

* Add group vars note

Change-Id: I63550dfef616e884efdbd42010a90b2c04c5eb69
2019-10-17 07:02:38 -07:00
Sergey
81d57fe658 set calico_datastore default value in role kubespray-default (#5259) 2019-10-17 05:58:38 -07:00
Tony Fouchard
f67a24499b Allow to specify feature_control in calico cni config (#4879)
* Allow to specify feature_control in calico cni config

* list length checking

* double check

* remove 2 conditions
2019-06-16 23:14:07 -07:00
grialeyur
82119ca923 Add support calico kubernetes datastore and typha. (#4498)
* Add support calico kubernetes datastore and typha.

* Add typha_enabled to kubespray-defaults.
2019-04-25 05:00:48 -07:00
Matthew Mosesohn
05dc2b3a09 Use K8s 1.14 and add kubeadm experimental control plane mode (#4514)
* Use K8s 1.14 and add kubeadm experimental control plane mode

This reverts commit d39c273d96.

* Cleanup kubeadm setup run on first master

* pin kubeadm_certificate_key in test

* Remove kubelet autolabel of kube-node, add symlink for pki dir

Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
2019-04-19 06:01:54 -07:00
Matthew Mosesohn
d39c273d96 Revert "Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)" (#4510)
This reverts commit 316508626d.
2019-04-11 12:52:43 -07:00
Matthew Mosesohn
316508626d Use K8s 1.14 and add kubeadm experimental control plane mode (#4317)
* Use Kubernetes 1.14 and experimental control plane support

* bump to v1.14.0
2019-04-11 05:30:13 -07:00
Maxime Guyot
353afa7cb0 Fix ipip: false in calico v3 (#4473) 2019-04-10 05:50:15 -07:00
Matthew Mosesohn
4fe2aa6bf7 Use install_cni init container for cni copy for calico/canal (#4416) 2019-04-02 03:32:36 -07:00
ml
483f1d2ca0 Calico felix - Fix jinja2 boolean condition (#4348)
* Fix jinja2 boolean condition

* Convert all felix variable to booleans instead.
2019-03-29 16:07:09 -07:00
Chad Swenson
8872b2e0c6 Fix calico when kube_override_hostname is set (#4235)
This fixes an issue where the `nodename` in calico's cni config json can fall out of sync with the k8s node name used by the calico pod if `kube_override_hostname` is set
2019-02-13 16:02:48 -08:00
wangxf
a096761306 [PR-Calico]Support calico 3.4.0 (#4102)
* Suport calico 3.4.0

Signed-off-by: wangxf1987 <xiaofeix.wang@gmail.com>

* Remove symlink + cni conflist template when 3.3.0+, handle Canal, addition of install-cni: sidecar(3.3.0) or initontainer(3.4.0), KUBECONFIG_FILEPATH, calico_cert_dir, advertise cluster ips

* scheduler.alpha.kubernetes.io/critical-pod deprecated since 1.12
2019-01-28 11:03:49 -08:00
Douglas Hellinger
4479cc48fe Introduce calico_upgrade_url var for Calico upgrade tool.
So that binary can be sourced from anywhere - not only github.
2019-01-23 16:19:27 +08:00
Andreas Krüger
d5ce5874e8 Streamline path to certs dir (#3836)
* Streamline path to certs dir

* More fixes

* Set path to etcd certs in kubernetes defaults instead
2018-12-06 23:11:53 -08:00
Joost Cassee
f2635776cd Make Calico Felix log level configurable (#3781) 2018-11-28 00:55:01 -08:00
Anupam Basak
3ce933051a calico CALICO_IPV4POOL_IPIP overriding variable (#3507) 2018-10-12 00:09:36 -07:00
Alex Yakovenko
884053aaa7
Make Felix healthhost configurable 2018-09-18 15:48:29 +03:00
mlushpenko
ea2c9d8f57 Fix yaml checks 2018-09-06 16:26:57 +02:00
Matthew Mosesohn
dc3e317d20 Fix backward compatibility with calico 2.6 2018-09-06 15:54:20 +03:00
Aivars Sterns
23fd3461bc calico upgrade to v3 (#3086)
* calico upgrade to v3

* update calico_rr version

* add missing file

* change contents of main.yml as it was left old version

* enable network policy by default

* remove unneeded task

* Fix kubelet calico settings

* fix when statement

* switch back to node-kubeconfig.yaml
2018-08-23 17:17:18 +03:00
Wong Hoi Sing Edison
c3b3572025 Always create service account even rbac_enabled = false 2018-08-22 11:41:29 +08:00
Daniel Mohr
476b14b06e Make Calico nodename overridable on bare metal
Signed-off-by: Daniel Mohr <daniel.mohr@supercrunch.io>
2018-05-14 14:13:51 +02:00
Wong Hoi Sing Edison
195d6d791a Integrate jetstack/cert-manager 0.2.3 to Kubespray 2018-03-31 19:29:11 +08:00
Anton Fayzrahmanov
a75598b3f4
IP_AUTODETECTION_METHOD docs 2018-03-24 01:54:17 +03:00
Matthew Mosesohn
87f33a4644 Use CNI to assign kube_pods_subnet for calico
Now calico can be deployed if there are other existing pools
and not confuse IPAM and end up with pods in the wrong pools.
2018-02-21 20:32:28 +03:00
Matthew Mosesohn
d2935ffed0
Optionally ignore the presence of extra calico pools (#2190) 2018-01-25 18:44:20 +03:00
Brad Beam
b81c0d869c Adding calico/node env vars for prometheus configuration 2017-10-05 08:46:01 -05:00
Matthew Mosesohn
77602dbb93 Move calico to daemonset (#1605)
* Drop legacy calico logic

* add calico as a daemonset
2017-09-04 11:29:51 +03:00
Vijay Katam
c92506e2e7 Add calico variable that enables ignoring Kernel's RPF Setting (#1493) 2017-08-20 14:01:09 +03:00
AtzeDeVries
e160018826 Fixed conflicts, ipip:true as defualt and added ipip_mode 2017-07-08 14:36:44 +02:00
Kevin Jing Qiu
a742d10c54 Allow calico ipPool to be created with mode "cross-subnet" 2017-07-04 19:05:16 -04:00
AtzeDeVries
61b74f9a5b updated to direct control over ipip 2017-06-23 09:16:05 +02:00
AtzeDeVries
7332679678 Give more control over IPIP, but with same default behaviour 2017-06-20 14:50:08 +02:00
Brad Beam
56664b34a6 Lower default memory requests
This is to address out of memory issues on CI as well as help
fit deployments for people starting out with kargo on smaller
machines
2017-02-27 10:53:43 -06:00
Matthew Mosesohn
fd30131dc2 Revert "Drop linux capabilities and rework users/groups" 2017-02-06 15:58:54 +03:00
Bogdan Dobrelya
cb2e5ac776 Drop linux capabilities and rework users/groups
* Drop linux capabilities for unprivileged containerized
  worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
  components' static manifests, etcd, calico-rr and k8s apps,
  like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
  supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
  networking containers though).
* Grant the kube and netplug users read access for etcd certs via
  the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
  and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
  for control plane.

Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
2017-01-20 08:50:42 +01:00
Aleksandr Didenko
d9539e0f27 Fix etcd cert generation for calico-rr role
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
2017-01-09 12:06:25 +01:00
Bogdan Dobrelya
a56d9de502 Systemd units, limits, and bin path fixes
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
  systemd limits due to the lack of consensus in the kernel community
  requires out-of-tree kernel patches.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-12-28 15:49:42 +01:00
Aleksandr Didenko
d57c27ffcf Add calico/routereflector support
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.

Also bump version of calico/ctl for some bug fixes.
2016-12-14 13:44:10 +01:00
Aleksandr Didenko
e3470b28c5 Move CNI config and add MTU support for calico-cni
- Move CNI configuration creation for Calico to appropriate
network_plugin role from kubernetes/node.
- Add support for MTU configuration in Calico.
2016-11-15 18:05:11 +01:00
Matthew Mosesohn
a32cd85eb7 Add etcd TLS support 2016-11-09 18:38:28 +03:00
Smana
056f4b6c00 upgrade to kubernetes version 1.4.0
test to change the machine type

Revert "test to change the machine type"

This reverts commit 7a91f1b5405a39bee6cb91940b09a0b0f9d3aee1.

use google dns server when no upstream dns are defined

comment upstream_dns_servers

update documentation

remove deprecated kubelet flags

Revert "remove deprecated kubelet flags"

This reverts commit 21e3b893c896d0291c36a07d0414f4cb88b8d8ac.
2016-10-10 22:44:47 +02:00
Aleksandr Didenko
2b6866484e Allow to use custom "canalized" calico cni
- Allow to overwrite calico cni binaries copied from hyperkube
  by the custom ones.
- Fix calico-ipam deployment (it had wrong source in rsync)
- Make copy from hyperkube idempotent (use rsync instead of cp)
- Remove some orphaned comments
2016-09-28 18:09:20 +02:00
Bogdan Dobrelya
422428908a Download containers and save all
Move version/repo vars to download role.
Add container to download params, which overrides url/source_url,
if enabled.
Fix networking plugins download depending on kube_network_plugin.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
2016-09-15 16:43:56 +02:00
Anthony Haussmann
d47a2d03b4 Delete default variable use_hyperkube_cni
The variable is now set via a task depending of the version of kube
2016-09-13 14:59:50 +02:00
Matthew Mosesohn
b92404fd0a Enable customization of calico-node docker image
New vars: calico_node_image_repo and claico_node_image_tag
Defaults: calico/node and {{ calico_version }}, respectively
2016-08-27 16:25:39 +04:00