This allows `kube_apiserver_insecure_port` to be set to 0 (disabled).
Rework of #1937 with kubeadm support
Also, fixed an issue in `kubeadm-migrate-certs` where the old apiserver cert was copied as the kubeadm key
* Allow setting --bind-address for apiserver hyperkube
This is required if you wish to configure a loadbalancer (e.g haproxy)
running on the master nodes without choosing a different port for the
vip from that used by the API - in this case you need the API to bind to
a specific interface, then haproxy can bind the same port on the VIP:
root@overcloud-controller-0 ~]# netstat -taupen | grep 6443
tcp 0 0 192.168.24.6:6443 0.0.0.0:* LISTEN 0 680613 134504/haproxy
tcp 0 0 192.168.24.16:6443 0.0.0.0:* LISTEN 0 653329 131423/hyperkube
tcp 0 0 192.168.24.16:6443 192.168.24.16:58404 ESTABLISHED 0 652991 131423/hyperkube
tcp 0 0 192.168.24.16:58404 192.168.24.16:6443 ESTABLISHED 0 652986 131423/hyperkube
This can be achieved e.g via:
kube_apiserver_bind_address: 192.168.24.16
* Address code review feedback
* Update kube-apiserver.manifest.j2
* Add Contiv support
Contiv is a network plugin for Kubernetes and Docker. It supports
vlan/vxlan/BGP/Cisco ACI technologies. It support firewall policies,
multiple networks and bridging pods onto physical networks.
* Update contiv version to 1.1.4
Update contiv version to 1.1.4 and added SVC_SUBNET in contiv-config.
* Load openvswitch module to workaround on CentOS7.4
* Set contiv cni version to 0.1.0
Correct contiv CNI version to 0.1.0.
* Use kube_apiserver_endpoint for K8S_API_SERVER
Use kube_apiserver_endpoint as K8S_API_SERVER to make contiv talks
to a available endpoint no matter if there's a loadbalancer or not.
* Make contiv use its own etcd
Before this commit, contiv is using a etcd proxy mode to k8s etcd,
this work fine when the etcd hosts are co-located with contiv etcd
proxy, however the k8s peering certs are only in etcd group, as a
result the etcd-proxy is not able to peering with the k8s etcd on
etcd group, plus the netplugin is always trying to find the etcd
endpoint on localhost, this will cause problem for all netplugins
not runnign on etcd group nodes.
This commit make contiv uses its own etcd, separate from k8s one.
on kube-master nodes (where net-master runs), it will run as leader
mode and on all rest nodes it will run as proxy mode.
* Use cp instead of rsync to copy cni binaries
Since rsync has been removed from hyperkube, this commit changes it
to use cp instead.
* Make contiv-etcd able to run on master nodes
* Add rbac_enabled flag for contiv pods
* Add contiv into CNI network plugin lists
* migrate contiv test to tests/files
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Add required rules for contiv netplugin
* Better handling json return of fwdMode
* Make contiv etcd port configurable
* Use default var instead of templating
* roles/download/defaults/main.yml: use contiv 1.1.7
Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com>
* Defaults for apiserver_loadbalancer_domain_name
When loadbalancer_apiserver is defined, use the
apiserver_loadbalancer_domain_name with a given default value.
Fix unconsistencies for checking if apiserver_loadbalancer_domain_name
is defined AND using it with a default value provided at once.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
* Define defaults for LB modes in common defaults
Adjust the defaults for apiserver_loadbalancer_domain_name and
loadbalancer_apiserver_localhost to come from a single source, which is
kubespray-defaults. Removes some confusion and simplefies the code.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Thought this wasn't required at first but I forgot there's no auto flush at the end of these tasks since the `kubernetes/master` role is not the end of the play.
* Fixes an issue where apiserver and friends (controller manager, scheduler) were prevented from restarting after manifests/secrets are changed. This occurred when a replaced kubelet doesn't reconcile new master manifests, which caused old master component versions to linger during deployment. In my case this was causing upgrades from k8s 1.6/1.7 -> k8s 1.8 to fail
* Improves transitions from kubelet container to host kubelet by preventing issues where kubelet container reappeared during the deployment
This allows `kube_apiserver_insecure_port` to be set to 0 (disabled). It's working, but so far I have had to:
1. Make the `uri` module "Wait for apiserver up" checks use `kube_apiserver_port` (HTTPS)
2. Add apiserver client cert/key to the "Wait for apiserver up" checks
3. Update apiserver liveness probe to use HTTPS ports
4. Set `kube_api_anonymous_auth` to true to allow liveness probe to hit apiserver's /healthz over HTTPS (livenessProbes can't use client cert/key unfortunately)
5. RBAC has to be enabled. Anonymous requests are in the `system:unauthenticated` group which is granted access to /healthz by one of RBAC's default ClusterRoleBindings. An equivalent ABAC rule could allow this as well.
Changes 1 and 2 should work for everyone, but 3, 4, and 5 require new coupling of currently independent configuration settings. So I also added a new settings check.
Options:
1. The problem goes away if you have both anonymous-auth and RBAC enabled. This is how kubeadm does it. This may be the best way to go since RBAC is already on by default but anonymous auth is not.
2. Include conditional templates to set a different liveness probe for possible combinations of `kube_apiserver_insecure_port = 0`, RBAC, and `kube_api_anonymous_auth` (won't be possible to cover every case without a guaranteed authorizer for the secure port)
3. Use basic auth headers for the liveness probe (I really don't like this, it adds a new dependency on basic auth which I'd also like to leave independently configurable, and it requires encoded passwords in the apiserver manifest)
Option 1 seems like the clear winner to me, but is there a reason we wouldn't want anonymous-auth on by default? The apiserver binary defaults anonymous-auth to true, but kubespray's default was false.
* Change deprecated vagrant ansible flag 'sudo' to 'become'
* Workaround ansible bug where access var via dict doesn't get real value
When accessing a variable via it's name "{{ foo }}" its value is
retrieved. But when the variable value is retrieved via the vars-dict
"{{ vars['foo'] }}" this doesn't resolve the expression of the variable
any more due to a bug. So e.g. a expression foo="{{ 1 == 1 }}" isn't
longer resolved but just returned as string "1 == 1".
* Make file yamllint complient
Some time ago I think the hardcoded `/var/lib/docker` was required, but kubelet running in a container has been aware of the Docker path since at least as far back as k8s 1.6.
Without this change, you see a large number of errors in the kubelet logs if you installed with a non-default `docker_daemon_graph`
* Refactor downloads to use download role directly
Also disable fact delegation so download delegate works acros OSes.
* clean up bools and ansible_os_family conditionals
* Update main.yml
Needs to set up resolv.conf before updating Yum cache otherwise no name resolution available (resolv.conf empty).
* Update main.yml
Removing trailing spaces
* Add possibility to insert more ip adresses in certificates
* Add newline at end of files
* Move supp ip parameters to k8s-cluster group file
* Add supplementary addresses in kubeadm master role
* Improve openssl indexes
* don't try to install this rpm on fedora atomic
* add docker 1.13.1 for fedora
* built-in docker unit file is sufficient, as tested on both fedora and centos atomic
* Change file used to check kubeadm upgrade method
Test for ca.crt instead of admin.conf because admin.conf
is created during normal deployment.
* more fixes for upgrade
* Rename dns_server to dnsmasq_dns_server so that it includes role prefix
as the var name is generic and conflicts when integrating with existing ansible automation.
* Enable selinux state to be configurable with new var preinstall_selinux_state
PID namespace sharing is disabled only in Kubernetes 1.7.
Explicitily enabling it by default could help reduce unexpected
results when upgrading to or downgrading from 1.7.
This follows pull request #1677, adding the cgroup-driver
autodetection also for kubeadm way of deploying.
Info about this and the possibility to override is added to the docs.
Red Hat family platforms run docker daemon with `--exec-opt
native.cgroupdriver=systemd`. When kubespray tried to start kubelet
service, it failed with:
Error: failed to run Kubelet: failed to create kubelet: misconfiguration: kubelet cgroup driver: "cgroupfs" is different from docker cgroup driver: "systemd"
Setting kubelet's cgroup driver to the correct value for the platform
fixes this issue. The code utilizes autodetection of docker's cgroup
driver, as different RPMs for the same distro may vary in that regard.
New files: /etc/kubernetes/admin.conf
/root/.kube/config
$GITDIR/artifacts/{kubectl,admin.conf}
Optional method to download kubectl and admin.conf if
kubeconfig_lcoalhost is set to true (default false)
* kubeadm support
* move k8s master to a subtask
* disable k8s secrets when using kubeadm
* fix etcd cert serial var
* move simple auth users to master role
* make a kubeadm-specific env file for kubelet
* add non-ha CI job
* change ci boolean vars to json format
* fixup
* Update create-gce.yml
* Update create-gce.yml
* Update create-gce.yml
This sets br_netfilter and net.bridge.bridge-nf-call-iptables sysctl from a single play before kube-proxy is first ran instead of from the flannel and weave network_plugin roles after kube-proxy is started
* using separated vault roles for generate certs with different `O` (Organization) subject field;
* configure vault roles for issuing certificates with different `CN` (Common name) subject field;
* set `CN` and `O` to `kubernetes` and `etcd` certificates;
* vault/defaults vars definition was simplified;
* vault dirs variables defined in kubernetes-defaults foles for using
shared tasks in etcd and kubernetes/secrets roles;
* upgrade vault to 0.8.1;
* generate random vault user password for each role by default;
* fix `serial` file name for vault certs;
* move vault auth request to issue_cert tasks;
* enable `RBAC` in vault CI;
* Added update CA trust step for etcd and kube/secrets roles
* Added load_balancer_domain_name to certificate alt names if defined. Reset CA's in RedHat os.
* Rename kube-cluster-ca.crt to vault-ca.crt, we need separated CA`s for vault, etcd and kube.
* Vault role refactoring, remove optional cert vault auth because not not used and worked. Create separate CA`s fro vault and etcd.
* Fixed different certificates set for vault cert_managment
* Update doc/vault.md
* Fixed condition create vault CA, wrong group
* Fixed missing etcd_cert_path mount for rkt deployment type. Distribute vault roles for all vault hosts
* Removed wrong when condition in create etcd role vault tasks.
* Updates Controller Manager/Kubelet with Flannel's required configuration for CNI
* Removes old Flannel installation
* Install CNI enabled Flannel DaemonSet/ConfigMap/CNI bins and config (with portmap plugin) on host
* Uses RBAC if enabled
* Fixed an issue that could occur if br_netfilter is not a module and net.bridge.bridge-nf-call-iptables sysctl was not set
* Adding yaml linter to ci check
* Minor linting fixes from yamllint
* Changing CI to install python pkgs from requirements.txt
- adding in a secondary requirements.txt for tests
- moving yamllint to tests requirements
If Kubernetes > 1.6 register standalone master nodes w/ a
node-role.kubernetes.io/master=:NoSchedule taint to allow
for more flexible scheduling rather than just marking unschedulable.
Change kubelet deploy mode to host
Enable cri and qos per cgroup for kubelet
Update CoreOS images
Add upgrade hook for switching from kubelet deployment from docker to host.
Bump machine type for ubuntu-rkt-sep
* Added custom ips to etcd vault distributed certificates
* Added custom ips to kube-master vault distributed certificates
* Added comment about issue_cert_copy_ca var in vault/issue_cert role file
* Generate kube-proxy, controller-manager and scheduler certificates by vault
* Revert "Disable vault from CI (#1546)"
This reverts commit 781f31d2b8.
* Fixed upgrade cluster with vault cert manager
* Remove vault dir in reset playbook
* Bump tag for upgrade CI, fix netchecker upgrade
netchecker-server was changed from pod to deployment, so
we need an upgrade hook for it.
CI now uses v2.1.1 as a basis for upgrade.
* Fix upgrades for certs from non-rbac to rbac
When VPC is used, external DNS might not be available. This patch change
behavior to use metadata service instead of external DNS when
upstream_dns_servers is not specified.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
According to code apiserver, scheduler, controller-manager, proxy don't
use resolution of objects they created. It's not harmful to change
policy to have external resolver.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
In kubernetes 1.6 ClusterFirstWithHostNet was added as an option. In
accordance to it kubelet will generate resolv.conf based on own
resolv.conf. However, this doesn't create 'options', thus the proper
solution requires some investigation.
This patch sets the same resolv.conf for kubelet as host
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Run docker run from script rather than directly from systemd target
- Refactoring styling/templates
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
Non-brekable space is 0xc2 0xa0 byte sequence in UTF-8.
To find one:
$ git grep -I -P '\xc2\xa0'
To replace with regular space:
$ git grep -l -I -P '\xc2\xa0' | xargs sed -i 's/\xc2\xa0/ /g'
This commit doesn't include changes that will overlap with commit f1c59a91a1.
By default Calico CNI does not create any network access policies
or profiles if 'policy' is enabled in CNI config. And without any
policies/profiles network access to/from PODs is blocked.
K8s related policies are created by calico-policy-controller in
such case. So we need to start it as soon as possible, before any
real workloads.
This patch also fixes kube-api port in calico-policy-controller
yaml template.
Closes#1132
It is now possible to deactivate selected authentication methods
(basic auth, token auth) inside the cluster by adding
removing the required arguments to the Kube API Server and generating
the secrets accordingly.
The x509 authentification is currently not optional because disabling it
would affect the kubectl clients deployed on the master nodes.
Default backend is now etcd3 (was etcd2).
The migration process consists of the following steps:
* check if migration is necessary
* stop etcd on first etcd server
* run migration script
* start etcd on first etcd server
* stop kube-apiserver until configuration is updated
* update kube-apiserver
* purge old etcdv2 data
Issue #1125. Make RBAC authorization plugin work out of the box.
"When bootstrapping, superuser credentials should include the system:masters group, for example by creating a client cert with /O=system:masters. This gives those credentials full access to the API and allows an admin to then set up bindings for other users."
To use OpenID Connect Authentication beside deploying an OpenID Connect
Identity Provider it is necesarry to pass additional arguments to the Kube API Server.
These required arguments were added to the kube apiserver manifest.
Until now it was not possible to add an API Loadbalancer
without an static IP Address. But certain Loadbalancers
like AWS Elastic Loadbalanacer dontt have an fixed IP address.
With this commit it is possible to add these kind of Loadbalancers
to the Kargo deployment.
Updates based on feedback
Simplify checks for file exists
remove invalid char
Review feedback. Use regular systemd file.
Add template for docker systemd atomic
Kubernetes project is about to set etcdv3 as default storage engine in
1.6. This patch allows to specify particular backend for
kube-apiserver. User may force the option to etcdv3 for new environment.
At the same time if the environment uses v2 it will continue uses it
until user decides to upgrade to v3.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Sometimes, a sysadmin might outright delete the SELinux rpms and
delete the configuration. This causes the selinux module to fail
with
```
IOError: [Errno 2] No such file or directory: '/etc/selinux/config'\n",
"module_stdout": "", "msg": "MODULE FAILURE"}
```
This simply checks that /etc/selinux/config exists before we try
to set it Permissive.
Update from feedback
Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
Kubelet is responsible for creating symlinks from /var/lib/docker to /var/log
to make fluentd logging collector work.
However without using host's /var/log those links are invisible to fluentd.
This is done on rkt configuration too.
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).
Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.
Closes: #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
node-monitor-period, pod-eviction-timeout for Kubernetes controller
manager
- Add Kubernetes Relaibility Documentation with recomendations for
various scenarios.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
kubelet lost the ability to load kernel modules. This
puts that back by adding the lib/modules mount to kubelet.
The new variable kubelet_load_modules can be set to true
to enable this item. It is OFF by default.
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
- Docker 1.12 and further don't need nsenter hack. This patch removes
it. Also, it bumps the minimal version to 1.12.
Closes#776
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
* Drop linux capabilities for unprivileged containerized
worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
components' static manifests, etcd, calico-rr and k8s apps,
like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
networking containers though).
* Grant the kube and netplug users read access for etcd certs via
the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
for control plane.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
be run by limit on each node without regard for order.
The changes make sure that all of the directories needed to do
certificate management are on the master[0] or etcd[0] node regardless
of when the playbook gets run on each node. This allows for separate
ansible playbook runs in parallel that don't have to be synchronized.
the openssl tools will fail to create signing requests because
the CN is too long. This is mainly a problem when FQDNs are used
in the inventory file.
THis will truncate the hostname for the CN field only at the
first dot. This should handle the issue for most cases.
Also remove the check for != "RedHat" when removing the dhclient hook,
as this had also to be done on other distros. Instead, check if the
dhclienthookfile is defined.
the tasks fail because selinux prevents ip-forwarding setting.
Moving the tasks around addresses two issues. Makes sure that
the correct python tools are in place before adjusting of selinux
and makes sure that ipforwarding is toggled after selinux adjustments.
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
systemd limits due to the lack of consensus in the kernel community
requires out-of-tree kernel patches.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
