Commit graph

821 commits

Author SHA1 Message Date
Matthew Mosesohn
f5e27f1a21 Merge pull request #1021 from holser/remove_deprecated
Replace always_run with check_mode
2017-02-14 11:25:58 +03:00
Matthew Mosesohn
bb6415ddc4 Merge pull request #1015 from holser/rkt_ssl_ca_dirs
Set ssl_ca_dirs for rkt based on fact
2017-02-14 11:25:17 +03:00
Antoine Legrand
e877cd2874 Merge pull request #1024 from holser/bug/961
Install pip on Ubuntu
2017-02-13 17:53:57 +01:00
Sergii Golovatiuk
732ae69d22 Install pip on Ubuntu
Closes: #961
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 16:27:09 +01:00
Matthew Mosesohn
b5be335db3 Clean up dnsmasq purge task 2017-02-13 17:30:15 +03:00
Sergii Golovatiuk
5f4cc3e1de Replace always_run with check_mode
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
2017-02-13 15:00:56 +01:00
Sergii Golovatiuk
aeadaa1184 Set ssl_ca_dirs for rkt based on fact
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.

Closes: #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-13 13:28:29 +01:00
Matthew Mosesohn
2f0f0006e3 Merge pull request #988 from mattymo/feat/rolling3
Add CI cases for testing upgrade from v2.0.1 release
2017-02-10 18:09:43 +03:00
Matthew Mosesohn
de047a2b8c Merge pull request #983 from vwfs/centos_kernel_upgrade
Add kernel upgrade for CentOS
2017-02-10 14:40:27 +03:00
Antoine Legrand
86a35652bb Merge pull request #1009 from mattymo/dnsmasq_updates
Enable reset of dnsmasq if manifest or config changes
2017-02-10 11:43:09 +01:00
Matthew Mosesohn
6ae70e03cb fixup upgrades for canal and weave 2017-02-10 13:27:41 +03:00
Bogdan Dobrelya
89ae9f1f88 Merge pull request #1002 from code0x9/master
use ansible sysctl module for config ip forwarding
2017-02-10 10:40:18 +01:00
Alexander Block
d2e010cbe1 Add kernel upgrade for CentOS 2017-02-10 09:29:12 +01:00
Matthew Mosesohn
a44a0990f5 Enable reset of dnsmasq if manifest or config changes 2017-02-10 10:40:07 +04:00
Matthew Mosesohn
2f88c9eefe Merge pull request #989 from holser/kubelet_remedy
Kubernetes Reliability Improvements
2017-02-10 09:29:29 +03:00
Matthew Mosesohn
60f1936a62 Merge pull request #1004 from galthaus/kubelet-load-modules
Allow kubelet to load kernel modules
2017-02-10 09:28:16 +03:00
Sergii Golovatiuk
c07d60bc90 Kubernetes Reliability Improvements
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
  chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
  node-monitor-period, pod-eviction-timeout for Kubernetes controller
  manager
- Add Kubernetes Relaibility Documentation with recomendations for
  various scenarios.

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-09 23:54:08 +01:00
Matthew Mosesohn
29fd957352 Enable weave upgrade from previous versions
Raise readiness probe initial time to 60 (was 30)
2017-02-09 21:39:31 +03:00
Matthew Mosesohn
0a7c6eb9dc Merge pull request #998 from mattymo/fix_upgrade_daemonsets
Fix upgrade for all daemonset type resources
2017-02-09 20:02:21 +03:00
Greg Althaus
3f0c13af8a Make kubelet_load_modules always present but false.
Update code and docs for that assumption.
2017-02-09 10:25:44 -06:00
Greg Althaus
fcd78eb1f7 Due to the nsenter and other reworks, it appears that
kubelet lost the ability to load kernel modules.  This
puts that back by adding the lib/modules mount to kubelet.

The new variable kubelet_load_modules can be set to true
to enable this item.  It is OFF by default.
2017-02-09 10:02:26 -06:00
Matthew Mosesohn
17dfae6d4e Merge pull request #999 from holser/decrease_weave_ram_limits
Lower weave RAM settings.
2017-02-09 13:19:12 +03:00
Mark Lee
e414c25fd7 follow sysctl.conf file symlink if linked 2017-02-09 18:16:52 +09:00
Mark Lee
34a71554ae use ansible sysctl module for config ip forwarding 2017-02-09 17:28:44 +09:00
Bogdan Dobrelya
3b1a196c75 Merge pull request #902 from insequent/master
Adding vault role
2017-02-09 09:24:52 +01:00
Bogdan Dobrelya
105dbf471e Merge pull request #993 from code0x9/master
enable proxy support on docker repository
2017-02-09 09:21:01 +01:00
Antoine Legrand
68df0d4909 Merge pull request #986 from vwfs/dnsmasq_system_nameservers
Also add the system nameservers to upstream servers in dnsmasq
2017-02-08 23:21:54 +01:00
Josh Conant
245e05ce61 Vault security hardening and role isolation 2017-02-08 21:41:36 +00:00
Josh Conant
f4ec2d18e5 Adding the Vault role 2017-02-08 21:31:28 +00:00
Sergii Golovatiuk
4124d84c00 Lower weave RAM settings.
- Since Weave 1.8.x was rewritten in Golang we may decrease RAM settings
  to continue using g1-small for CI
2017-02-08 18:50:36 +01:00
Matthew Mosesohn
3c713a3f53 Fix upgrade for all daemonset type resources
Daemonsets cannot be simply upgraded through a single API call,
regardless of any kubectl documentation. The resource must be
purged and then recreated in order to make any changes.
2017-02-08 18:16:00 +03:00
Alexander Block
89e570493a Also add the system nameservers to upstream servers in dnsmasq
Also make no-resolv unconditional again. Otherwise, we may end up in
a resolver loop. The resolver loop was the cause for the piling up
parallel queries.
2017-02-08 14:38:55 +01:00
Matthew Mosesohn
16674774c7 Merge pull request #994 from mattymo/docker_save
Change docker save compress level to 1
2017-02-08 15:13:15 +03:00
Matthew Mosesohn
0180ad7f38 Merge pull request #990 from mattymo/fix_cert_upgrade
Fix check for node-NODEID certs existence
2017-02-08 14:44:09 +03:00
Matthew Mosesohn
bfd1ea1da1 Merge pull request #971 from bradbeam/efk
Adding EFK logging stack
2017-02-08 14:28:04 +03:00
Mark Lee
3eacd0c871 Update rh_docker.repo.j2 2017-02-08 20:03:51 +09:00
Matthew Mosesohn
d587270293 Merge pull request #992 from vwfs/host_mount_dev
Host mount /dev for kubelet
2017-02-08 13:45:22 +03:00
Matthew Mosesohn
3eb13e83cf Change docker save compress level to 1
Faster gzip improves CI deploy times by at least 2 mins.

Fixes #982
2017-02-08 13:25:11 +03:00
Mark Lee
df761713aa Merge branch 'master' of https://github.com/kubespray/kargo 2017-02-08 19:19:26 +09:00
Mark Lee
de50f37fea enable proxy support on docker repository 2017-02-08 19:19:08 +09:00
Matthew Mosesohn
bad6076905 Merge pull request #987 from mattymo/etcd-retune
Re-tune ETCD performance params
2017-02-08 13:00:25 +03:00
Bogdan Dobrelya
c2bd76a22e Merge pull request #956 from adidenko/update-netchecker
Update playbooks to support new netchecker
2017-02-08 10:09:46 +01:00
Alexander Block
010fe30b53 Host mount /dev for kubelet 2017-02-08 09:55:51 +01:00
Matthew Mosesohn
e5779ab786 Fix check for node-NODEID certs existence
Fixes upgrade from pre-individual node cert envs.
2017-02-07 21:06:48 +03:00
Matthew Mosesohn
71e14a13b4 Re-tune ETCD performance params
Reduce election timeout to 5000ms (was 10000ms)
Raise heartbeat interval to 250ms (was 100ms)
Remove etcd cpu share (was 300)
Make etcd_cpu_limit and etcd_memory_limit optional.
2017-02-07 20:15:14 +03:00
Matthew Mosesohn
491074aab1 Merge pull request #969 from mattymo/port_reserve
Prevent dynamic port allocation in nodePort range
2017-02-07 18:24:57 +03:00
Aleksandr Didenko
54af533b31 Update playbooks to support new netchecker
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
2017-02-07 15:20:34 +01:00
Matthew Mosesohn
f3a0f73588 Prevent dynamic port allocation in nodePort range
kube_apiserver_node_port_range should be accessible only
to kube-proxy and not be taken by a dynamic port allocation.

Potentially temporary if https://github.com/kubernetes/kubernetes/issues/40920
gets fixed.
2017-02-06 20:01:16 +03:00
Sergii Golovatiuk
5122697f0b Improve Weave
- Remove weave CPU limits from .gitlab-ci.yml. Closes: #975
- Fix weave version in documentation

Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
2017-02-06 13:24:40 +01:00
Antoine Legrand
bd1c764a1a Merge pull request #963 from rutsky/bastion-ansible-host
handle both 'ansible_host' and 'ansible_ssh_host' in bastion configration
2017-02-04 15:42:39 -05:00