To use OpenID Connect Authentication beside deploying an OpenID Connect
Identity Provider it is necesarry to pass additional arguments to the Kube API Server.
These required arguments were added to the kube apiserver manifest.
- Only have ubuntu to test on
- fedora and redhat are placeholders/guesses
- the "old" package repositories seem to have the "new" CE version which is `1.13.1` based
- `docker-ce` looks like it is named as a backported `docker-engine` package in some
places
- Did not change the `defaults` version anywhere, so should work as before
- Did not point to new package repositories, as existing ones have the new packages.
By default kubedns and dnsmasq scale when installed.
Dnsmasq is no longer a daemonset. It is now a deployment.
Kubedns is no longer a replicationcluster. It is now a deployment.
Minimum replicas is two (to enable rolling updates).
Reduced memory erquirements for dnsmasq and kubedns
Until now it was not possible to add an API Loadbalancer
without an static IP Address. But certain Loadbalancers
like AWS Elastic Loadbalanacer dontt have an fixed IP address.
With this commit it is possible to add these kind of Loadbalancers
to the Kargo deployment.
The default version of Docker was switched to 1.13 in #1059. This
change also bumped ubuntu from installing docker-engine 1.13.0 to
1.13.1. This PR updates os families which had 1.13 defined, but
were using 1.13.0.
The impetus for this change is an issue running tiller 1.2.3 on
docker 1.13.0. See discussion [1][2].
[1] https://github.com/kubernetes/helm/issues/1838
[2] https://github.com/kubernetes-incubator/kargo/pull/1100
Updates based on feedback
Simplify checks for file exists
remove invalid char
Review feedback. Use regular systemd file.
Add template for docker systemd atomic
By default Calico blocks traffic from endpoints
to the host itself by using an iptables DROP
action. It could lead to a situation when service
has one alive endpoint, but pods which run on
the same node can not access it. Changed the action
to RETURN.
Kubernetes project is about to set etcdv3 as default storage engine in
1.6. This patch allows to specify particular backend for
kube-apiserver. User may force the option to etcdv3 for new environment.
At the same time if the environment uses v2 it will continue uses it
until user decides to upgrade to v3.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
Operator can specify any port for kube-api (6443 default) This helps in
case where some pods such as Ingress require 443 exclusively.
Closes: 820
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
When a apiserver_loadbalancer_domain_name is added to the Openssl.conf
the counter gets not increased correctly. This didnt seem to have an
effect at the current kargo version.
* Leave all.yml to keep only optional vars
* Store groups' specific vars by existing group names
* Fix optional vars casted as mandatory (add default())
* Fix missing defaults for an optional IP var
* Relink group_vars for terraform to reflect changes
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
Sometimes, a sysadmin might outright delete the SELinux rpms and
delete the configuration. This causes the selinux module to fail
with
```
IOError: [Errno 2] No such file or directory: '/etc/selinux/config'\n",
"module_stdout": "", "msg": "MODULE FAILURE"}
```
This simply checks that /etc/selinux/config exists before we try
to set it Permissive.
Update from feedback
New deploy modes: scale, ha-scale, separate-scale
Creates 200 fake hosts for deployment with fake hostvars.
Useful for testing certificate generation and propagation to other
master nodes.
Updated test cases descriptions.
Migrate older inline= syntax to pure yml syntax for module args as to be consistant with most of the rest of the tasks
Cleanup some spacing in various files
Rename some files named yaml to yml for consistancy
Ansible playbook fails when tags are limited to "facts,etcd" or to
"facts". This patch allows to run ansible-playbook to gather facts only
that don't require calico/flannel/weave components to be verified. This
allows to run ansible with 'facts,bootstrap-os' or just 'facts' to
gether facts that don't require specific components.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
Kubelet is responsible for creating symlinks from /var/lib/docker to /var/log
to make fluentd logging collector work.
However without using host's /var/log those links are invisible to fluentd.
This is done on rkt configuration too.
Based on #718 introduced by rsmitty.
Includes all roles and all options to support deployment of
new hosts in case they were added to inventory.
Main difference here is that master role is evaluated first
so that master components get upgraded first.
Fixes#694
- Refactor 'Check if bootstrap is needed' as ansible loop. This allows
to add new elements easily without refactoring. Add pip to the list.
- Refactor 'Install python 2.x' task to run once if any of rc
codes != 0. Actually, need_bootstrap is array of hashes, so map will
allow to get single array of rc statuses. So if status is not zero it
will be sorted and the last element will be get, converted to bool.
Closes: #961
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
"shell" step doesn't support check mode, which currently leads to failures,
when Ansible is being run in check mode (because Ansible doesn't run command,
assuming that command might have effect, and no "rc" or "output" is registered).
Setting "check_mode: no" allows to run those "shell" commands in check mode
(which is safe, because those shell commands doesn't have side effects).
always_run was deprecated in Ansible 2.2 and will be removed in 2.4
ansible logs contain "[DEPRECATION WARNING]: always_run is deprecated.
Use check_mode = no instead". This patch fix deprecation.
Since systemd kubelet.service has {{ ssl_ca_dirs }}, fact should be
gathered before writing kubelet.service.
Closes: #1007
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Exclude kubelet CPU/RAM (kube-reserved) from cgroup. It decreases a
chance of overcommitment
- Add a possibility to modify Kubelet node-status-update-frequency
- Add a posibility to configure node-monitor-grace-period,
node-monitor-period, pod-eviction-timeout for Kubernetes controller
manager
- Add Kubernetes Relaibility Documentation with recomendations for
various scenarios.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
kubelet lost the ability to load kernel modules. This
puts that back by adding the lib/modules mount to kubelet.
The new variable kubelet_load_modules can be set to true
to enable this item. It is OFF by default.
Daemonsets cannot be simply upgraded through a single API call,
regardless of any kubectl documentation. The resource must be
purged and then recreated in order to make any changes.
Also make no-resolv unconditional again. Otherwise, we may end up in
a resolver loop. The resolver loop was the cause for the piling up
parallel queries.
Reduce election timeout to 5000ms (was 10000ms)
Raise heartbeat interval to 250ms (was 100ms)
Remove etcd cpu share (was 300)
Make etcd_cpu_limit and etcd_memory_limit optional.
Netchecker is rewritten in Go lang with some new args instead of
env variables. Also netchecker-server no longer requires kubectl
container. Updating playbooks accordingly.
- Remove weave CPU limits from .gitlab-ci.yml. Closes: #975
- Fix weave version in documentation
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Docker 1.12 and further don't need nsenter hack. This patch removes
it. Also, it bumps the minimal version to 1.12.
Closes#776
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
- Set recommended CPU settings
- Cleans up upgrade to weave 1.82. The original WeaveWorks
daemonset definition uses weave-net name.
- Limit DS creation to master
- Combined 2 tasks into one with better condition
When DNSMasq is configured to read its settings
from a folder ('-7' or '--conf-dir' option) it only
checks that the directory exists and doesn't fail if
it's empty. It could lead to a situation when DNSMasq
is running and handles requests, but not properly
configured, so some of queries can't be resolved.
For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.
Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.
Closes#925
ndots creates overhead as every pod creates 5 concurrent connections
that are forwarded to sky dns. Under some circumstances dnsmasq may
prevent forwarding traffic with "Maximum number of concurrent DNS
queries reached" in the logs.
This patch allows to configure the number of concurrent forwarded DNS
queries "dns-forward-max" as well as "cache-size" leaving the default
values as they were before.
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
systemctl daemon-reload should be run before when task modifies/creates
union for etcd. Otherwise etcd won't be able to start
Closes#892
Signed-off-by: Sergii Golovatiuk <sgolovatiuk@mirantis.com>
be run by limit on each node without regard for order.
The changes make sure that all of the directories needed to do
certificate management are on the master[0] or etcd[0] node regardless
of when the playbook gets run on each node. This allows for separate
ansible playbook runs in parallel that don't have to be synchronized.
the openssl tools will fail to create signing requests because
the CN is too long. This is mainly a problem when FQDNs are used
in the inventory file.
THis will truncate the hostname for the CN field only at the
first dot. This should handle the issue for most cases.
Also remove the check for != "RedHat" when removing the dhclient hook,
as this had also to be done on other distros. Instead, check if the
dhclienthookfile is defined.
the tasks fail because selinux prevents ip-forwarding setting.
Moving the tasks around addresses two issues. Makes sure that
the correct python tools are in place before adjusting of selinux
and makes sure that ipforwarding is toggled after selinux adjustments.
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
Change version for calico images to v1.0.0. Also bump versions for
CNI and policy controller.
Also removing images repo and tag duplication from netchecker role
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
systemd limits due to the lack of consensus in the kernel community
requires out-of-tree kernel patches.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Current design expects users to define at least one
nameserver in the nameservers var to backup host OS DNS config
when the K8s cluster DNS service IP is not available and hosts
still have to resolve external or intranet FQDNs.
Fix undefined nameservers to fallback to the default_resolver.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.
Also bump version of calico/ctl for some bug fixes.
Also place in global vars and do not repeat the kube_*_config_dir
and kube_namespace vars for better code maintainability and UX.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Do not repeat options and nameservers in the dhclient hooks.
Do not prepend nameservers for dhclient but supersede and fail back
to the upstream_dns_resolvers then default_resolver. Fixes order of
nameservers placement, which is cluster DNS ip goes always first.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
The Jinja2 filter 'reverse' returned an iterator instead of a list,
resulting in the umount task to fail.
Intead of using the reverse filter, we use 'tac' to reverse the output
of the previous task.
* For Debian/RedHat OS families (with NetworkManager/dhclient/resolvconf
optionally enabled) prepend /etc/resolv.conf with required nameservers,
options, and supersede domain and search domains via the dhclient/resolvconf
hooks.
* Drop (z)nodnsupdate dhclient hook and re-implement it to complement the
resolvconf -u command, which is distro/cloud provider specific.
Update docs as well.
* Enable network restart to apply and persist changes and simplify handlers
to rely on network restart only. This fixes DNS resolve for hostnet K8s
pods for Red Hat OS family. Skip network restart for canal/calico plugins,
unless https://github.com/projectcalico/felix/issues/1185 fixed.
* Replace linefiles line plus with_items to block mode as it's faster.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
skip_dnsmasq_k8s var as not needed anymore.
* Preconfigure DNS stack early, which may be the case when downloading
artifacts from intranet repositories. Do not configure
K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
not existing).
* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
was set up and before K8s apps to be created.
* Move docker install task to early stage as well and unbind it from the
etcd role's specific install path. Fix external flannel dependency on
docker role handlers. Also fix the docker restart handlers' steps
ordering to match the expected sequence (the socket then the service).
* Add default resolver fact, which is
the cloud provider specific and remove hardcoded GCE resolver.
* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
domains combined with high ndots values lead to poor performance of
DNS stack and make ansible workers to fail very often with the
"Timeout (12s) waiting for privilege escalation prompt:" error.
* Update docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add upload tag allow users to exclude distributing images across nodes
when running with the download tag set.
Add related tags and update docs as well.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
This will allow to use '-e docker_version=1.12' in ansible playbook
execution. It's also backward-compatible and will work with floating
docker_version format in custom yaml files.
Closes#702
The variale etcd_access_addresses is used to determine
how to address communication from other roles to
the etcd cluster.
It was set to the address that ansible uses to
connect to instance ({{ item }})s and not the
the variable:
ip_access
which had already been created and could already
be overridden through the access_ip variable.
This change allows ansible to connect to a machine using
a different address than the one used to access etcd.
