--- # Use proxycommand if bastion host is in group all # This change obseletes editing ansible.cfg file depending on bastion existance ansible_ssh_common_args: "{% if 'bastion' in groups['all'] %} -o ProxyCommand='ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -W %h:%p {{ hostvars['bastion']['ansible_user'] }}@{{ hostvars['bastion']['ansible_host'] }} {% if ansible_ssh_private_key_file is defined %}-i {{ ansible_ssh_private_key_file }}{% endif %} ' {% endif %}" kube_api_anonymous_auth: false # Default value, but will be set to true automatically if detected is_atomic: false # optional disable the swap disable_swap: true ## Change this to use another Kubernetes version, e.g. a current beta release kube_version: v1.12.2 ## Kube Proxy mode One of ['iptables','ipvs'] kube_proxy_mode: iptables # Kube-proxy nodeport address. # cidr to bind nodeport services. Flag --nodeport-addresses on kube-proxy manifest kube_proxy_nodeport_addresses: false # kube_proxy_nodeport_addresses_cidr: 10.0.1.0/24 # Set to true to allow pre-checks to fail and continue deployment ignore_assert_errors: false # nginx-proxy configure nginx_config_dir: "/etc/nginx" # Directory where the binaries will be installed bin_dir: /usr/local/bin docker_bin_dir: /usr/bin etcd_data_dir: /var/lib/etcd # Where the binaries will be downloaded. # Note: ensure that you've enough disk space (about 1G) local_release_dir: "/tmp/releases" # Random shifts for retrying failed ops like pushing/downloading retry_stagger: 5 # DNS configuration. # Kubernetes cluster name, also will be used as DNS domain cluster_name: cluster.local # Subdomains of DNS domain to be resolved via /etc/resolv.conf for hostnet pods ndots: 2 # Can be dnsmasq_kubedns, kubedns, manual or none dns_mode: kubedns # Should be set to a cluster IP if using a custom cluster DNS # manual_dns_server: 10.x.x.x # Can be docker_dns, host_resolvconf or none resolvconf_mode: docker_dns # Deploy netchecker app to verify DNS resolve as an HTTP service deploy_netchecker: false # Ip address of the kubernetes skydns service skydns_server: "{{ kube_service_addresses|ipaddr('net')|ipaddr(3)|ipaddr('address') }}" skydns_server_secondary: "{{ kube_service_addresses|ipaddr('net')|ipaddr(4)|ipaddr('address') }}" dnsmasq_dns_server: "{{ kube_service_addresses|ipaddr('net')|ipaddr(2)|ipaddr('address') }}" dns_domain: "{{ cluster_name }}" kube_dns_servers: kubedns: ["{{skydns_server}}"] coredns: ["{{skydns_server}}"] coredns_dual: "{{[skydns_server] + [ skydns_server_secondary ]}}" manual: ["{{manual_dns_server}}"] dnsmasq_kubedns: ["{{dnsmasq_dns_server}}"] dns_servers: "{{kube_dns_servers[dns_mode]}}" # Kubernetes configuration dirs and system namespace. # Those are where all the additional config stuff goes # the kubernetes normally puts in /srv/kubernetes. # This puts them in a sane location and namespace. # Editing those values will almost surely break something. kube_config_dir: /etc/kubernetes kube_script_dir: "{{ bin_dir }}/kubernetes-scripts" kube_manifest_dir: "{{ kube_config_dir }}/manifests" # This is where all the cert scripts and certs will be located kube_cert_dir: "{{ kube_config_dir }}/ssl" # This is where all of the bearer tokens will be stored kube_token_dir: "{{ kube_config_dir }}/tokens" # This is where to save basic auth file kube_users_dir: "{{ kube_config_dir }}/users" # This is the group that the cert creation scripts chgrp the # cert files to. Not really changeable... kube_cert_group: kube-cert # Cluster Loglevel configuration kube_log_level: 2 # Users to create for basic auth in Kubernetes API via HTTP kube_api_pwd: "changeme" kube_users: kube: pass: "{{kube_api_pwd}}" role: admin # Choose network plugin (cilium, calico, weave or flannel) # Can also be set to 'cloud', which lets the cloud provider setup appropriate routing kube_network_plugin: calico kube_network_plugin_multus: false # Determines if calico-rr group exists peer_with_calico_rr: "{{ 'calico-rr' in groups and groups['calico-rr']|length > 0 }}" # Set to false to disable calico-upgrade calico_upgrade_enabled: true # Kubernetes internal network for services, unused block of space. kube_service_addresses: 10.233.0.0/18 # internal network. When used, it will assign IP # addresses from this range to individual pods. # This network must be unused in your network infrastructure! kube_pods_subnet: 10.233.64.0/18 # internal network node size allocation (optional). This is the size allocated # to each node on your network. With these defaults you should have # room for 64 nodes with 254 pods per node. # Example: Up to 256 nodes, 100 pods per node (/16 network): # - kube_service_addresses: 10.233.0.0/17 # - kube_pods_subnet: 10.233.128.0/17 # - kube_network_node_prefix: 25 # Example: Up to 4096 nodes, 100 pods per node (/12 network): # - kube_service_addresses: 10.192.0.0/13 # - kube_pods_subnet: 10.200.0.0/13 # - kube_network_node_prefix: 25 kube_network_node_prefix: 24 # The virtual cluster IP, real host IPs and ports the API Server will be # listening on. # NOTE: loadbalancer_apiserver_localhost somewhat alters the final API enpdoint # access IP value (automatically evaluated below) kube_apiserver_ip: "{{ kube_service_addresses|ipaddr('net')|ipaddr(1)|ipaddr('address') }}" kube_apiserver_bind_address: 0.0.0.0 # https kube_apiserver_port: 6443 # http kube_apiserver_insecure_bind_address: 127.0.0.1 kube_apiserver_insecure_port: 8080 # dynamic kubelet configuration dynamic_kubelet_configuration: false # define kubelet config dir for dynamic kubelet # kubelet_config_dir: default_kubelet_config_dir: "{{ kube_config_dir }}/dynamic_kubelet_dir" dynamic_kubelet_configuration_dir: "{{ kubelet_config_dir | default(default_kubelet_config_dir) }}" # Aggregator kube_api_aggregator_routing: false # Profiling kube_profiling: false # Container for runtime container_manager: docker ## Uncomment this if you want to force overlay/overlay2 as docker storage driver ## Please note that overlay2 is only supported on newer kernels # docker_storage_options: -s overlay2 ## Enable docker_container_storage_setup, it will configure devicemapper driver on Centos7 or RedHat7. docker_container_storage_setup: false ## It must be define a disk path for docker_container_storage_setup_devs. ## Otherwise docker-storage-setup will be executed incorrectly. # docker_container_storage_setup_devs: /dev/vdb ## Uncomment this if you have more than 3 nameservers, then we'll only use the first 3. docker_dns_servers_strict: false # Path used to store Docker data docker_daemon_graph: "/var/lib/docker" ## Used to set docker daemon iptables options to true docker_iptables_enabled: "false" # Docker log options # Rotate container stderr/stdout logs at 50m and keep last 5 docker_log_opts: "--log-opt max-size=50m --log-opt max-file=5" ## An obvious use case is allowing insecure-registry access to self hosted registries. ## Can be ipddress and domain_name. ## example define 172.19.16.11 or mirror.registry.io # docker_insecure_registries: # - mirror.registry.io # - 172.19.16.11 ## Add other registry,example China registry mirror. # docker_registry_mirrors: # - https://registry.docker-cn.com # - https://mirror.aliyuncs.com ## If non-empty will override default system MounFlags value. ## This option takes a mount propagation flag: shared, slave ## or private, which control whether mounts in the file system ## namespace set up for docker will receive or propagate mounts ## and unmounts. Leave empty for system default # docker_mount_flags: ## A string of extra options to pass to the docker daemon. ## This string should be exactly as you wish it to appear. docker_options: >- {%- if docker_insecure_registries is defined -%} {{ docker_insecure_registries | map('regex_replace', '^(.*)$', '--insecure-registry=\1' ) | list | join(' ') }} {%- endif %} {% if docker_registry_mirrors is defined -%} {{ docker_registry_mirrors | map('regex_replace', '^(.*)$', '--registry-mirror=\1' ) | list | join(' ') }} {%- endif %} --graph={{ docker_daemon_graph }} {{ docker_log_opts }} {%- if ansible_architecture == "aarch64" and ansible_os_family == "RedHat" %} --add-runtime docker-runc=/usr/libexec/docker/docker-runc-current --default-runtime=docker-runc --exec-opt native.cgroupdriver=systemd --userland-proxy-path=/usr/libexec/docker/docker-proxy-current --signature-verification=false {%- endif -%} # Settings for containerized control plane (etcd/kubelet/secrets) etcd_deployment_type: docker kubelet_deployment_type: docker cert_management: script vault_deployment_type: docker helm_deployment_type: host # Enable kubeadm deployment (experimental) kubeadm_enabled: false # Make a copy of kubeconfig on the host that runs Ansible in {{ inventory_dir }}/artifacts kubeconfig_localhost: false # Download kubectl onto the host that runs Ansible in {{ bin_dir }} kubectl_localhost: false # Define credentials_dir here so it can be overridden credentials_dir: "{{ inventory_dir }}/credentials" # K8s image pull policy (imagePullPolicy) k8s_image_pull_policy: IfNotPresent # Kubernetes dashboard # RBAC required. see docs/getting-started.md for access details. dashboard_enabled: true # Addons which can be enabled helm_enabled: false registry_enabled: false enable_network_policy: true local_volume_provisioner_enabled: "{{ local_volumes_enabled | default('false') }}" persistent_volumes_enabled: false cephfs_provisioner_enabled: false ingress_nginx_enabled: false cert_manager_enabled: false ## When OpenStack is used, Cinder version can be explicitly specified if autodetection fails (Fixed in 1.9: https://github.com/kubernetes/kubernetes/issues/50461) # openstack_blockstorage_version: "v1/v2/auto (default)" openstack_blockstorage_ignore_volume_az: "{{ volume_cross_zone_attachment | default('false') }}" ## When OpenStack is used, if LBaaSv2 is available you can enable it with the following 2 variables. openstack_lbaas_enabled: false # openstack_lbaas_subnet_id: "Neutron subnet ID (not network ID) to create LBaaS VIP" ## To enable automatic floating ip provisioning, specify a subnet. # openstack_lbaas_floating_network_id: "Neutron network ID (not subnet ID) to get floating IP from, disabled by default" ## Override default LBaaS behavior # openstack_lbaas_use_octavia: False # openstack_lbaas_method: "ROUND_ROBIN" # openstack_lbaas_provider: "haproxy" openstack_lbaas_create_monitor: "yes" openstack_lbaas_monitor_delay: "1m" openstack_lbaas_monitor_timeout: "30s" openstack_lbaas_monitor_max_retries: "3" openstack_cacert: "{{ lookup('env','OS_CACERT') }}" ## List of authorization modes that must be configured for ## the k8s cluster. Only 'AlwaysAllow', 'AlwaysDeny', 'Node' and ## 'RBAC' modes are tested. Order is important. authorization_modes: ['Node', 'RBAC'] rbac_enabled: "{{ 'RBAC' in authorization_modes or kubeadm_enabled }}" # When enabled, API bearer tokens (including service account tokens) can be used to authenticate to the kubelet’s HTTPS endpoint kubelet_authentication_token_webhook: true # When enabled, access to the kubelet API requires authorization by delegation to the API server kubelet_authorization_mode_webhook: false ## v1.11 feature feature_gate_v1_11: - "PersistentLocalVolumes={{ local_volume_provisioner_enabled | string }}" - "VolumeScheduling={{ local_volume_provisioner_enabled | string }}" - "MountPropagation={{ local_volume_provisioner_enabled | string }}" ## v1.12 feature feature_gate_v1_12: [] ## List of key=value pairs that describe feature gates for ## the k8s cluster. kube_feature_gates: |- {%- if kube_version is version('v1.12.0', '<') -%} {{ feature_gate_v1_11 }} {%- else -%} {{ feature_gate_v1_12 }} {%- endif %} # Vault data dirs. vault_base_dir: /etc/vault vault_cert_dir: "{{ vault_base_dir }}/ssl" vault_config_dir: "{{ vault_base_dir }}/config" vault_roles_dir: "{{ vault_base_dir }}/roles" vault_secrets_dir: "{{ vault_base_dir }}/secrets" # Local volume provisioner storage classes local_volume_provisioner_storage_classes: - name: "{{ local_volume_provisioner_storage_class | default('local-storage') }}" host_dir: "{{ local_volume_provisioner_base_dir | default ('/mnt/disks') }}" mount_dir: "{{ local_volume_provisioner_mount_dir | default('/mnt/disks') }}" # weave's network password for encryption # if null then no network encryption # you can use --extra-vars to pass the password in command line weave_password: EnterPasswordHere # Weave uses consensus mode by default # Enabling seed mode allow to dynamically add or remove hosts # https://www.weave.works/docs/net/latest/ipam/ weave_mode_seed: false # This two variable are automatically changed by the weave's role in group_vars/k8s-cluster.yml. # Do not manually change these values weave_seed: uninitialized weave_peers: uninitialized # Contiv L3 BGP Mode contiv_peer_with_uplink_leaf: false contiv_global_as: "65002" contiv_global_neighbor_as: "500" ## Set no_proxy to all assigned cluster IPs and hostnames no_proxy: >- {%- if http_proxy is defined or https_proxy is defined %} {%- if loadbalancer_apiserver is defined -%} {{ apiserver_loadbalancer_domain_name| default('') }}, {{ loadbalancer_apiserver.address | default('') }}, {%- endif -%} {%- for item in (groups['k8s-cluster'] + groups['etcd'] + groups['calico-rr']|default([]))|unique -%} {{ hostvars[item]['access_ip'] | default(hostvars[item]['ip'] | default(hostvars[item]['ansible_default_ipv4']['address'])) }}, {%- if (item != hostvars[item]['ansible_hostname']) -%} {{ hostvars[item]['ansible_hostname'] }}, {{ hostvars[item]['ansible_hostname'] }}.{{ dns_domain }}, {%- endif -%} {{ item }},{{ item }}.{{ dns_domain }}, {%- endfor -%} {%- if additional_no_proxy is defined -%} {{ additional_no_proxy }}, {%- endif -%} 127.0.0.1,localhost {%- endif %} proxy_env: http_proxy: "{{ http_proxy| default ('') }}" https_proxy: "{{ https_proxy| default ('') }}" no_proxy: "{{ no_proxy| default ('') }}" ssl_ca_dirs: >- [ {% if ansible_os_family in ['CoreOS', 'Container Linux by CoreOS'] -%} '/usr/share/ca-certificates', {% elif ansible_os_family == 'RedHat' -%} '/etc/pki/tls', '/etc/pki/ca-trust', {% elif ansible_os_family == 'Debian' -%} '/usr/share/ca-certificates', {% endif -%} ] # Vars for pointing to kubernetes api endpoints is_kube_master: "{{ inventory_hostname in groups['kube-master'] }}" kube_apiserver_count: "{{ groups['kube-master'] | length }}" kube_apiserver_address: "{{ ip | default(ansible_default_ipv4['address']) }}" kube_apiserver_access_address: "{{ access_ip | default(kube_apiserver_address) }}" first_kube_master: "{{ hostvars[groups['kube-master'][0]]['access_ip'] | default(hostvars[groups['kube-master'][0]]['ip'] | default(hostvars[groups['kube-master'][0]]['ansible_default_ipv4']['address'])) }}" loadbalancer_apiserver_localhost: "{{ loadbalancer_apiserver is not defined }}" # applied if only external loadbalancer_apiserver is defined, otherwise ignored apiserver_loadbalancer_domain_name: "lb-apiserver.kubernetes.local" kube_apiserver_endpoint: |- {% if not is_kube_master and loadbalancer_apiserver_localhost -%} https://localhost:{{ nginx_kube_apiserver_port|default(kube_apiserver_port) }} {%- elif is_kube_master -%} https://{{ kube_apiserver_bind_address | regex_replace('0\.0\.0\.0','127.0.0.1') }}:{{ kube_apiserver_port }} {%- else -%} {%- if loadbalancer_apiserver is defined and loadbalancer_apiserver.port is defined -%} https://{{ apiserver_loadbalancer_domain_name|default('lb-apiserver.kubernetes.local') }}:{{ loadbalancer_apiserver.port|default(kube_apiserver_port) }} {%- else -%} https://{{ first_kube_master }}:{{ kube_apiserver_port }} {%- endif -%} {%- endif %} kube_apiserver_insecure_endpoint: >- http://{{ kube_apiserver_insecure_bind_address | regex_replace('0\.0\.0\.0','127.0.0.1') }}:{{ kube_apiserver_insecure_port }} kube_apiserver_client_cert: |- {% if kubeadm_enabled -%} {{ kube_cert_dir }}/ca.crt {%- else -%} {{ kube_cert_dir }}/apiserver.pem {%- endif %} kube_apiserver_client_key: |- {% if kubeadm_enabled -%} {{ kube_cert_dir }}/ca.key {%- else -%} {{ kube_cert_dir }}/apiserver-key.pem {%- endif %} # Set to true to deploy etcd-events cluster etcd_events_cluster_enabled: false # Vars for pointing to etcd endpoints is_etcd_master: "{{ inventory_hostname in groups['etcd'] }}" etcd_address: "{{ ip | default(ansible_default_ipv4['address']) }}" etcd_access_address: "{{ access_ip | default(etcd_address) }}" etcd_events_access_address: "{{ access_ip | default(etcd_address) }}" etcd_peer_url: "https://{{ etcd_access_address }}:2380" etcd_client_url: "https://{{ etcd_access_address }}:2379" etcd_events_peer_url: "https://{{ etcd_events_access_address }}:2382" etcd_events_client_url: "https://{{ etcd_events_access_address }}:2381" etcd_access_addresses: |- {% for item in groups['etcd'] -%} https://{{ hostvars[item]['access_ip'] | default(hostvars[item]['ip'] | default(hostvars[item]['ansible_default_ipv4']['address'])) }}:2379{% if not loop.last %},{% endif %} {%- endfor %} etcd_events_access_addresses_list: |- [ {% for item in groups['etcd'] -%} 'https://{{ hostvars[item]['access_ip'] | default(hostvars[item]['ip'] | default(hostvars[item]['ansible_default_ipv4']['address'])) }}:2381'{% if not loop.last %},{% endif %} {%- endfor %} ] etcd_events_access_addresses: "{{etcd_events_access_addresses_list | join(',')}}" etcd_events_access_addresses_semicolon: "{{etcd_events_access_addresses_list | join(';')}}" # user should set etcd_member_name in inventory/mycluster/hosts.ini etcd_member_name: |- {% for host in groups['etcd'] %} {% if inventory_hostname == host %}{{ hostvars[host].etcd_member_name | default("etcd" + loop.index|string) }}{% endif %} {% endfor %} etcd_peer_addresses: |- {% for item in groups['etcd'] -%} {{ hostvars[item].etcd_member_name | default("etcd" + loop.index|string) }}=https://{{ hostvars[item].access_ip | default(hostvars[item].ip | default(hostvars[item].ansible_default_ipv4['address'])) }}:2380{% if not loop.last %},{% endif %} {%- endfor %} etcd_events_peer_addresses: |- {% for item in groups['etcd'] -%} {{ hostvars[item].etcd_member_name | default("etcd" + loop.index|string) }}-events=https://{{ hostvars[item].access_ip | default(hostvars[item].ip | default(hostvars[item].ansible_default_ipv4['address'])) }}:2382{% if not loop.last %},{% endif %} {%- endfor %} podsecuritypolicy_enabled: false etcd_heartbeat_interval: "250" etcd_election_timeout: "5000" etcd_snapshot_count: "10000" certificates_key_size: 2048 certificates_duration: 36500 pip_extra_args: |- {%- set pip_extra_args_list = [] -%} {%- if pyrepo_index is defined -%} {%- set DO = pip_extra_args_list.append('--index-url %s' | format(pyrepo_index)) -%} {%- if pyrepo_cert is defined -%} {%- set DO = pip_extra_args_list.append('--cert %s' | format(pyrepo_cert)) -%} {%- endif -%} {%- endif -%} {{ pip_extra_args_list|join(' ') }}