cda88e6770
I recently reviewed the code, although these errors are not important, they affect the code specification.
45 lines
1.1 KiB
Plaintext
45 lines
1.1 KiB
Plaintext
# ## Configure 'ip' variable to bind kubernetes services on a
|
|
# ## different ip than the default iface
|
|
# node1 ansible_ssh_host=95.54.0.12 # ip=10.3.0.1
|
|
# node2 ansible_ssh_host=95.54.0.13 # ip=10.3.0.2
|
|
# node3 ansible_ssh_host=95.54.0.14 # ip=10.3.0.3
|
|
# node4 ansible_ssh_host=95.54.0.15 # ip=10.3.0.4
|
|
# node5 ansible_ssh_host=95.54.0.16 # ip=10.3.0.5
|
|
# node6 ansible_ssh_host=95.54.0.17 # ip=10.3.0.6
|
|
#
|
|
# ## GlusterFS nodes
|
|
# ## Set disk_volume_device_1 to desired device for gluster brick, if different to /dev/vdb (default).
|
|
# ## As in the previous case, you can set ip to give direct communication on internal IPs
|
|
# gfs_node1 ansible_ssh_host=95.54.0.18 # disk_volume_device_1=/dev/vdc ip=10.3.0.7
|
|
# gfs_node2 ansible_ssh_host=95.54.0.19 # disk_volume_device_1=/dev/vdc ip=10.3.0.8
|
|
# gfs_node3 ansible_ssh_host=95.54.0.20 # disk_volume_device_1=/dev/vdc ip=10.3.0.9
|
|
|
|
# [kube_control_plane]
|
|
# node1
|
|
# node2
|
|
|
|
# [etcd]
|
|
# node1
|
|
# node2
|
|
# node3
|
|
|
|
# [kube_node]
|
|
# node2
|
|
# node3
|
|
# node4
|
|
# node5
|
|
# node6
|
|
|
|
# [k8s_cluster:children]
|
|
# kube_node
|
|
# kube_control_plane
|
|
|
|
# [gfs-cluster]
|
|
# gfs_node1
|
|
# gfs_node2
|
|
# gfs_node3
|
|
|
|
# [network-storage:children]
|
|
# gfs-cluster
|
|
|