c12s-kubespray/roles/container-engine/cri-o/templates/crio.conf.j2
kranthi guttikonda 81bf4f9304
cri-o registry auth support (#7837)
* cri-o registry auth support

* yaml lint for comments

* crio_registry_auth from registry_auth

* crio_registry_auth as defaults
2021-09-01 10:20:59 -07:00

389 lines
15 KiB
Django/Jinja

# The CRI-O configuration file specifies all of the available configuration
# options and command-line flags for the crio(8) OCI Kubernetes Container Runtime
# daemon, but in a TOML format that can be more easily modified and versioned.
#
# Please refer to crio.conf(5) for details of all configuration options.
# CRI-O supports partial configuration reload during runtime, which can be
# done by sending SIGHUP to the running process. Currently supported options
# are explicitly mentioned with: 'This option supports live configuration
# reload'.
# CRI-O reads its storage defaults from the containers-storage.conf(5) file
# located at /etc/containers/storage.conf. Modify this storage configuration if
# you want to change the system's defaults. If you want to modify storage just
# for CRI-O, you can change the storage configuration options here.
[crio]
# Path to the "root directory". CRI-O stores all of its data, including
# containers images, in this directory.
#root = "/var/lib/containers/storage"
# Path to the "run directory". CRI-O stores all of its state in this directory.
#runroot = "/var/run/containers/storage"
# Storage driver used to manage the storage of images and containers. Please
# refer to containers-storage.conf(5) to see all available storage drivers.
{% if crio_storage_driver is defined %}
storage_driver = "{{ crio_storage_driver }}"
{% endif %}
# List to pass options to the storage driver. Please refer to
# containers-storage.conf(5) to see all available storage options.
#storage_option = [
#]
# The default log directory where all logs will go unless directly specified by
# the kubelet. The log directory specified must be an absolute directory.
log_dir = "/var/log/crio/pods"
# Location for CRI-O to lay down the temporary version file.
# It is used to check if crio wipe should wipe containers, which should
# always happen on a node reboot
version_file = "/var/run/crio/version"
# Location for CRI-O to lay down the persistent version file.
# It is used to check if crio wipe should wipe images, which should
# only happen when CRI-O has been upgraded
version_file_persist = "/var/lib/crio/version"
# The crio.api table contains settings for the kubelet/gRPC interface.
[crio.api]
# Path to AF_LOCAL socket on which CRI-O will listen.
listen = "/var/run/crio/crio.sock"
# IP address on which the stream server will listen.
stream_address = "127.0.0.1"
# The port on which the stream server will listen. If the port is set to "0", then
# CRI-O will allocate a random free port number.
stream_port = "{{ crio_stream_port }}"
# Enable encrypted TLS transport of the stream server.
stream_enable_tls = false
# Path to the x509 certificate file used to serve the encrypted stream. This
# file can change, and CRI-O will automatically pick up the changes within 5
# minutes.
stream_tls_cert = ""
# Path to the key file used to serve the encrypted stream. This file can
# change and CRI-O will automatically pick up the changes within 5 minutes.
stream_tls_key = ""
# Path to the x509 CA(s) file used to verify and authenticate client
# communication with the encrypted stream. This file can change and CRI-O will
# automatically pick up the changes within 5 minutes.
stream_tls_ca = ""
# Maximum grpc send message size in bytes. If not set or <=0, then CRI-O will default to 16 * 1024 * 1024.
grpc_max_send_msg_size = 16777216
# Maximum grpc receive message size. If not set or <= 0, then CRI-O will default to 16 * 1024 * 1024.
grpc_max_recv_msg_size = 16777216
# The crio.runtime table contains settings pertaining to the OCI runtime used
# and options for how to set up and manage the OCI runtime.
[crio.runtime]
# A list of ulimits to be set in containers by default, specified as
# "<ulimit name>=<soft limit>:<hard limit>", for example:
# "nofile=1024:2048"
# If nothing is set here, settings will be inherited from the CRI-O daemon
#default_ulimits = [
#]
# default_runtime is the _name_ of the OCI runtime to be used as the default.
# The name is matched against the runtimes map below.
default_runtime = "runc"
# If true, the runtime will not use pivot_root, but instead use MS_MOVE.
no_pivot = false
# decryption_keys_path is the path where the keys required for
# image decryption are stored. This option supports live configuration reload.
decryption_keys_path = "/etc/crio/keys/"
# Path to the conmon binary, used for monitoring the OCI runtime.
# Will be searched for using $PATH if empty.
conmon = "{{ crio_conmon }}"
# Cgroup setting for conmon
{% if crio_cgroup_manager == "cgroupfs" %}
conmon_cgroup = "pod"
{% else %}
conmon_cgroup = "system.slice"
{% endif %}
# Environment variable list for the conmon process, used for passing necessary
# environment variables to conmon or the runtime.
conmon_env = [
"PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
]
# Additional environment variables to set for all the
# containers. These are overridden if set in the
# container image spec or in the container runtime configuration.
default_env = [
]
# If true, SELinux will be used for pod separation on the host.
selinux = {{ crio_selinux }}
# Path to the seccomp.json profile which is used as the default seccomp profile
# for the runtime. If not specified, then the internal default seccomp profile
# will be used. This option supports live configuration reload.
seccomp_profile = "{{ crio_seccomp_profile }}"
# Used to change the name of the default AppArmor profile of CRI-O. The default
# profile name is "crio-default". This profile only takes effect if the user
# does not specify a profile via the Kubernetes Pod's metadata annotation. If
# the profile is set to "unconfined", then this equals to disabling AppArmor.
# This option supports live configuration reload.
# apparmor_profile = "crio-default"
# Cgroup management implementation used for the runtime.
cgroup_manager = "{{ crio_cgroup_manager }}"
# List of default capabilities for containers. If it is empty or commented out,
# only the capabilities defined in the containers json file by the user/kube
# will be added.
default_capabilities = [
"CHOWN",
"DAC_OVERRIDE",
"FSETID",
"FOWNER",
"NET_RAW",
"SETGID",
"SETUID",
"SETPCAP",
"NET_BIND_SERVICE",
"SYS_CHROOT",
"KILL",
]
# List of default sysctls. If it is empty or commented out, only the sysctls
# defined in the container json file by the user/kube will be added.
default_sysctls = [
]
# List of additional devices. specified as
# "<device-on-host>:<device-on-container>:<permissions>", for example: "--device=/dev/sdc:/dev/xvdc:rwm".
#If it is empty or commented out, only the devices
# defined in the container json file by the user/kube will be added.
additional_devices = [
]
# Path to OCI hooks directories for automatically executed hooks. If one of the
# directories does not exist, then CRI-O will automatically skip them.
hooks_dir = [
"/usr/share/containers/oci/hooks.d",
]
# List of default mounts for each container. **Deprecated:** this option will
# be removed in future versions in favor of default_mounts_file.
default_mounts = [
]
# Path to the file specifying the defaults mounts for each container. The
# format of the config is /SRC:/DST, one mount per line. Notice that CRI-O reads
# its default mounts from the following two files:
#
# 1) /etc/containers/mounts.conf (i.e., default_mounts_file): This is the
# override file, where users can either add in their own default mounts, or
# override the default mounts shipped with the package.
#
# 2) /usr/share/containers/mounts.conf: This is the default file read for
# mounts. If you want CRI-O to read from a different, specific mounts file,
# you can change the default_mounts_file. Note, if this is done, CRI-O will
# only add mounts it finds in this file.
#
#default_mounts_file = ""
# Maximum number of processes allowed in a container.
pids_limit = {{ crio_pids_limit }}
# Maximum sized allowed for the container log file. Negative numbers indicate
# that no size limit is imposed. If it is positive, it must be >= 8192 to
# match/exceed conmon's read buffer. The file is truncated and re-opened so the
# limit is never exceeded.
log_size_max = -1
# Whether container output should be logged to journald in addition to the kuberentes log file
log_to_journald = false
# Path to directory in which container exit files are written to by conmon.
container_exits_dir = "/var/run/crio/exits"
# Path to directory for container attach sockets.
container_attach_socket_dir = "/var/run/crio"
# The prefix to use for the source of the bind mounts.
bind_mount_prefix = ""
# If set to true, all containers will run in read-only mode.
read_only = false
# Changes the verbosity of the logs based on the level it is set to. Options
# are fatal, panic, error, warn, info, debug and trace. This option supports
# live configuration reload.
log_level = "{{ crio_log_level }}"
# Filter the log messages by the provided regular expression.
# This option supports live configuration reload.
log_filter = ""
# The UID mappings for the user namespace of each container. A range is
# specified in the form containerUID:HostUID:Size. Multiple ranges must be
# separated by comma.
uid_mappings = ""
# The GID mappings for the user namespace of each container. A range is
# specified in the form containerGID:HostGID:Size. Multiple ranges must be
# separated by comma.
gid_mappings = ""
# The minimal amount of time in seconds to wait before issuing a timeout
# regarding the proper termination of the container. The lowest possible
# value is 30s, whereas lower values are not considered by CRI-O.
ctr_stop_timeout = 30
# **DEPRECATED** this option is being replaced by manage_ns_lifecycle, which is described below.
# manage_network_ns_lifecycle = false
# manage_ns_lifecycle determines whether we pin and remove namespaces
# and manage their lifecycle
{% if kata_containers_enabled %}
manage_ns_lifecycle = true
{% else %}
manage_ns_lifecycle = false
{% endif %}
# The directory where the state of the managed namespaces gets tracked.
# Only used when manage_ns_lifecycle is true.
namespaces_dir = "/var/run"
# pinns_path is the path to find the pinns binary, which is needed to manage namespace lifecycle
pinns_path = ""
# The "crio.runtime.runtimes" table defines a list of OCI compatible runtimes.
# The runtime to use is picked based on the runtime_handler provided by the CRI.
# If no runtime_handler is provided, the runtime will be picked based on the level
# of trust of the workload. Each entry in the table should follow the format:
#
#[crio.runtime.runtimes.runtime-handler]
# runtime_path = "/path/to/the/executable"
# runtime_type = "oci"
# runtime_root = "/path/to/the/root"
#
# Where:
# - runtime-handler: name used to identify the runtime
# - runtime_path (optional, string): absolute path to the runtime executable in
# the host filesystem. If omitted, the runtime-handler identifier should match
# the runtime executable name, and the runtime executable should be placed
# in $PATH.
# - runtime_type (optional, string): type of runtime, one of: "oci", "vm". If
# omitted, an "oci" runtime is assumed.
# - runtime_root (optional, string): root directory for storage of containers
# state.
{% for runtime in crio_runtimes %}
[crio.runtime.runtimes.{{ runtime.name }}]
runtime_path = "{{ runtime.path }}"
runtime_type = "{{ runtime.type }}"
runtime_root = "{{ runtime.root }}"
privileged_without_host_devices = {{ runtime.privileged_without_host_devices|default(false)|lower }}
{% endfor %}
# Kata Containers with the Firecracker VMM
#[crio.runtime.runtimes.kata-fc]
# The crio.image table contains settings pertaining to the management of OCI images.
#
# CRI-O reads its configured registries defaults from the system wide
# containers-registries.conf(5) located in /etc/containers/registries.conf. If
# you want to modify just CRI-O, you can change the registries configuration in
# this file. Otherwise, leave insecure_registries and registries commented out to
# use the system's defaults from /etc/containers/registries.conf.
[crio.image]
# Default transport for pulling images from a remote container storage.
default_transport = "docker://"
# The path to a file containing credentials necessary for pulling images from
# secure registries. The file is similar to that of /var/lib/kubelet/config.json
global_auth_file = "/etc/crio/config.json"
# The image used to instantiate infra containers.
# This option supports live configuration reload.
pause_image = "{{ crio_pause_image }}"
# The path to a file containing credentials specific for pulling the pause_image from
# above. The file is similar to that of /var/lib/kubelet/config.json
# This option supports live configuration reload.
pause_image_auth_file = ""
# The command to run to have a container stay in the paused state.
# When explicitly set to "", it will fallback to the entrypoint and command
# specified in the pause image. When commented out, it will fallback to the
# default: "/pause". This option supports live configuration reload.
pause_command = "/pause"
# Path to the file which decides what sort of policy we use when deciding
# whether or not to trust an image that we've pulled. It is not recommended that
# this option be used, as the default behavior of using the system-wide default
# policy (i.e., /etc/containers/policy.json) is most often preferred. Please
# refer to containers-policy.json(5) for more details.
signature_policy = "{{ crio_signature_policy }}"
# List of registries to skip TLS verification for pulling images. Please
# consider configuring the registries via /etc/containers/registries.conf before
# changing them here.
insecure_registries = [
{% for insecure_registry in crio_insecure_registries %}
"{{ insecure_registry }}",
{% endfor %}
]
# Controls how image volumes are handled. The valid values are mkdir, bind and
# ignore; the latter will ignore volumes entirely.
image_volumes = "mkdir"
# List of registries to be used when pulling an unqualified image (e.g.,
# "alpine:latest"). By default, registries is set to "docker.io" for
# compatibility reasons. Depending on your workload and usecase you may add more
# registries (e.g., "quay.io", "registry.fedoraproject.org",
# "registry.opensuse.org", etc.).
registries = [
{% for registry in crio_registries %}
"{{ registry }}",
{% endfor %}
]
# The crio.network table containers settings pertaining to the management of
# CNI plugins.
[crio.network]
# The default CNI network name to be selected. If not set or "", then
# CRI-O will pick-up the first one found in network_dir.
# cni_default_network = ""
# Path to the directory where CNI configuration files are located.
network_dir = "/etc/cni/net.d/"
# Paths to directories where CNI plugin binaries are located.
plugin_dirs = [
"/opt/cni/bin",
"/usr/libexec/cni",
]
# A necessary configuration for Prometheus based metrics retrieval
[crio.metrics]
# Globally enable or disable metrics support.
enable_metrics = {{ crio_enable_metrics | bool | lower }}
# The port on which the metrics server will listen.
metrics_port = {{ crio_metrics_port }}