c12s-kubespray/roles/container-engine/kata-containers/templates/configuration-qemu.toml.j2
Cristian Calin 3a6230af6b
Kata-Containers: update versions 2.2.0 (default) and 2.1.1 (#8017)
* Kata-Containers: add 2.2.0 hashes and make default

* Kata-Containers: replace 2.1.0 with bugfix version 2.1.1

* Kata-Containers: move to q35 a more modern VM architecture as 'pc' is removed in 2.2.0
2021-09-27 08:07:35 -07:00

459 lines
18 KiB
Django/Jinja

# Copyright (c) 2017-2019 Intel Corporation
#
# SPDX-License-Identifier: Apache-2.0
#
# XXX: WARNING: this file is auto-generated.
# XXX:
# XXX: Source file: "cli/config/configuration-qemu.toml.in"
# XXX: Project:
# XXX: Name: Kata Containers
# XXX: Type: kata
[hypervisor.qemu]
path = "/opt/kata/bin/qemu-system-x86_64"
kernel = "/opt/kata/share/kata-containers/vmlinuz.container"
image = "/opt/kata/share/kata-containers/kata-containers.img"
machine_type = "q35"
# Optional space-separated list of options to pass to the guest kernel.
# For example, use `kernel_params = "vsyscall=emulate"` if you are having
# trouble running pre-2.15 glibc.
#
# WARNING: - any parameter specified here will take priority over the default
# parameter value of the same name used to start the virtual machine.
# Do not set values here unless you understand the impact of doing so as you
# may stop the virtual machine from booting.
# To see the list of default parameters, enable hypervisor debug, create a
# container and look for 'default-kernel-parameters' log entries.
kernel_params = ""
# Path to the firmware.
# If you want that qemu uses the default firmware leave this option empty
firmware = ""
# Machine accelerators
# comma-separated list of machine accelerators to pass to the hypervisor.
# For example, `machine_accelerators = "nosmm,nosmbus,nosata,nopit,static-prt,nofw"`
machine_accelerators=""
# Default number of vCPUs per SB/VM:
# unspecified or 0 --> will be set to 1
# < 0 --> will be set to the actual number of physical cores
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores --> will be set to the actual number of physical cores
default_vcpus = 1
# Default maximum number of vCPUs per SB/VM:
# unspecified or == 0 --> will be set to the actual number of physical cores or to the maximum number
# of vCPUs supported by KVM if that number is exceeded
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores --> will be set to the actual number of physical cores or to the maximum number
# of vCPUs supported by KVM if that number is exceeded
# WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when
# the actual number of physical cores is greater than it.
# WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU
# the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs
# can be added to a SB/VM, but the memory footprint will be big. Another example, with
# `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of
# vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable,
# unless you know what are you doing.
default_maxvcpus = 0
# Bridges can be used to hot plug devices.
# Limitations:
# * Currently only pci bridges are supported
# * Until 30 devices per bridge can be hot plugged.
# * Until 5 PCI bridges can be cold plugged per VM.
# This limitation could be a bug in qemu or in the kernel
# Default number of bridges per SB/VM:
# unspecified or 0 --> will be set to 1
# > 1 <= 5 --> will be set to the specified number
# > 5 --> will be set to 5
default_bridges = 1
# Default memory size in MiB for SB/VM.
# If unspecified then it will be set 2048 MiB.
default_memory = {{ kata_containers_qemu_default_memory }}
#
# Default memory slots per SB/VM.
# If unspecified then it will be set 10.
# This is will determine the times that memory will be hotadded to sandbox/VM.
#memory_slots = 10
# The size in MiB will be plused to max memory of hypervisor.
# It is the memory address space for the NVDIMM devie.
# If set block storage driver (block_device_driver) to "nvdimm",
# should set memory_offset to the size of block device.
# Default 0
#memory_offset = 0
# Specifies virtio-mem will be enabled or not.
# Please note that this option should be used with the command
# "echo 1 > /proc/sys/vm/overcommit_memory".
# Default false
#enable_virtio_mem = true
# Disable block device from being used for a container's rootfs.
# In case of a storage driver like devicemapper where a container's
# root file system is backed by a block device, the block device is passed
# directly to the hypervisor for performance reasons.
# This flag prevents the block device from being passed to the hypervisor,
# 9pfs is used instead to pass the rootfs.
disable_block_device_use = false
# Shared file system type:
# - virtio-9p (default)
# - virtio-fs
shared_fs = "virtio-9p"
# Path to vhost-user-fs daemon.
virtio_fs_daemon = "/opt/kata/bin/virtiofsd"
# Default size of DAX cache in MiB
virtio_fs_cache_size = 1024
# Extra args for virtiofsd daemon
#
# Format example:
# ["-o", "arg1=xxx,arg2", "-o", "hello world", "--arg3=yyy"]
#
# see `virtiofsd -h` for possible options.
virtio_fs_extra_args = []
# Cache mode:
#
# - none
# Metadata, data, and pathname lookup are not cached in guest. They are
# always fetched from host and any changes are immediately pushed to host.
#
# - auto
# Metadata and pathname lookup cache expires after a configured amount of
# time (default is 1 second). Data is cached while the file is open (close
# to open consistency).
#
# - always
# Metadata, data, and pathname lookup are cached in guest and never expire.
virtio_fs_cache = "always"
# Block storage driver to be used for the hypervisor in case the container
# rootfs is backed by a block device. This is virtio-scsi, virtio-blk
# or nvdimm.
block_device_driver = "virtio-scsi"
# Specifies cache-related options will be set to block devices or not.
# Default false
#block_device_cache_set = true
# Specifies cache-related options for block devices.
# Denotes whether use of O_DIRECT (bypass the host page cache) is enabled.
# Default false
#block_device_cache_direct = true
# Specifies cache-related options for block devices.
# Denotes whether flush requests for the device are ignored.
# Default false
#block_device_cache_noflush = true
# Enable iothreads (data-plane) to be used. This causes IO to be
# handled in a separate IO thread. This is currently only implemented
# for SCSI.
#
enable_iothreads = false
# Enable pre allocation of VM RAM, default false
# Enabling this will result in lower container density
# as all of the memory will be allocated and locked
# This is useful when you want to reserve all the memory
# upfront or in the cases where you want memory latencies
# to be very predictable
# Default false
enable_mem_prealloc = {{ kata_containers_qemu_enable_mem_prealloc }}
# Enable huge pages for VM RAM, default false
# Enabling this will result in the VM memory
# being allocated using huge pages.
# This is useful when you want to use vhost-user network
# stacks within the container. This will automatically
# result in memory pre allocation
#enable_hugepages = true
# Enable vhost-user storage device, default false
# Enabling this will result in some Linux reserved block type
# major range 240-254 being chosen to represent vhost-user devices.
enable_vhost_user_store = false
# The base directory specifically used for vhost-user devices.
# Its sub-path "block" is used for block devices; "block/sockets" is
# where we expect vhost-user sockets to live; "block/devices" is where
# simulated block device nodes for vhost-user devices to live.
vhost_user_store_path = "/var/run/kata-containers/vhost-user"
# Enable file based guest memory support. The default is an empty string which
# will disable this feature. In the case of virtio-fs, this is enabled
# automatically and '/dev/shm' is used as the backing folder.
# This option will be ignored if VM templating is enabled.
#file_mem_backend = ""
# Enable swap of vm memory. Default false.
# The behaviour is undefined if mem_prealloc is also set to true
#enable_swap = true
# This option changes the default hypervisor and kernel parameters
# to enable debug output where available. This extra output is added
# to the proxy logs, but only when proxy debug is also enabled.
#
# Default false
enable_debug = {{ kata_containers_qemu_debug }}
# Disable the customizations done in the runtime when it detects
# that it is running on top a VMM. This will result in the runtime
# behaving as it would when running on bare metal.
#
#disable_nesting_checks = true
# This is the msize used for 9p shares. It is the number of bytes
# used for 9p packet payload.
#msize_9p = 8192
# If true and vsocks are supported, use vsocks to communicate directly
# with the agent and no proxy is started, otherwise use unix
# sockets and start a proxy to communicate with the agent.
# Default false
#use_vsock = true
# If false and nvdimm is supported, use nvdimm device to plug guest image.
# Otherwise virtio-block device is used.
# Default is false
#disable_image_nvdimm = true
# VFIO devices are hotplugged on a bridge by default.
# Enable hotplugging on root bus. This may be required for devices with
# a large PCI bar, as this is a current limitation with hotplugging on
# a bridge. This value is valid for "pc" machine type.
# Default false
#hotplug_vfio_on_root_bus = true
# Before hot plugging a PCIe device, you need to add a pcie_root_port device.
# Use this parameter when using some large PCI bar devices, such as Nvidia GPU
# The value means the number of pcie_root_port
# This value is valid when hotplug_vfio_on_root_bus is true and machine_type is "q35"
# Default 0
#pcie_root_port = 2
# If vhost-net backend for virtio-net is not desired, set to true. Default is false, which trades off
# security (vhost-net runs ring0) for network I/O performance.
#disable_vhost_net = true
#
# Default entropy source.
# The path to a host source of entropy (including a real hardware RNG)
# /dev/urandom and /dev/random are two main options.
# Be aware that /dev/random is a blocking source of entropy. If the host
# runs out of entropy, the VMs boot time will increase leading to get startup
# timeouts.
# The source of entropy /dev/urandom is non-blocking and provides a
# generally acceptable source of entropy. It should work well for pretty much
# all practical purposes.
#entropy_source= "/dev/urandom"
# Path to OCI hook binaries in the *guest rootfs*.
# This does not affect host-side hooks which must instead be added to
# the OCI spec passed to the runtime.
#
# You can create a rootfs with hooks by customizing the osbuilder scripts:
# https://github.com/kata-containers/osbuilder
#
# Hooks must be stored in a subdirectory of guest_hook_path according to their
# hook type, i.e. "guest_hook_path/{prestart,postart,poststop}".
# The agent will scan these directories for executable files and add them, in
# lexicographical order, to the lifecycle of the guest container.
# Hooks are executed in the runtime namespace of the guest. See the official documentation:
# https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks
# Warnings will be logged if any error is encountered will scanning for hooks,
# but it will not abort container execution.
#guest_hook_path = "/usr/share/oci/hooks"
[factory]
# VM templating support. Once enabled, new VMs are created from template
# using vm cloning. They will share the same initial kernel, initramfs and
# agent memory by mapping it readonly. It helps speeding up new container
# creation and saves a lot of memory if there are many kata containers running
# on the same host.
#
# When disabled, new VMs are created from scratch.
#
# Note: Requires "initrd=" to be set ("image=" is not supported).
#
# Default false
#enable_template = true
# Specifies the path of template.
#
# Default "/run/vc/vm/template"
#template_path = "/run/vc/vm/template"
# The number of caches of VMCache:
# unspecified or == 0 --> VMCache is disabled
# > 0 --> will be set to the specified number
#
# VMCache is a function that creates VMs as caches before using it.
# It helps speed up new container creation.
# The function consists of a server and some clients communicating
# through Unix socket. The protocol is gRPC in protocols/cache/cache.proto.
# The VMCache server will create some VMs and cache them by factory cache.
# It will convert the VM to gRPC format and transport it when gets
# requestion from clients.
# Factory grpccache is the VMCache client. It will request gRPC format
# VM and convert it back to a VM. If VMCache function is enabled,
# kata-runtime will request VM from factory grpccache when it creates
# a new sandbox.
#
# Default 0
#vm_cache_number = 0
# Specify the address of the Unix socket that is used by VMCache.
#
# Default /var/run/kata-containers/cache.sock
#vm_cache_endpoint = "/var/run/kata-containers/cache.sock"
[proxy.kata]
path = "/opt/kata/libexec/kata-containers/kata-proxy"
# If enabled, proxy messages will be sent to the system log
# (default: disabled)
enable_debug = {{ kata_containers_qemu_debug }}
[shim.kata]
path = "/opt/kata/libexec/kata-containers/kata-shim"
# If enabled, shim messages will be sent to the system log
# (default: disabled)
enable_debug = {{ kata_containers_qemu_debug }}
# If enabled, the shim will create opentracing.io traces and spans.
# (See https://www.jaegertracing.io/docs/getting-started).
#
# Note: By default, the shim runs in a separate network namespace. Therefore,
# to allow it to send trace details to the Jaeger agent running on the host,
# it is necessary to set 'disable_new_netns=true' so that it runs in the host
# network namespace.
#
# (default: disabled)
#enable_tracing = true
[agent.kata]
# If enabled, make the agent display debug-level messages.
# (default: disabled)
enable_debug = {{ kata_containers_qemu_debug }}
# Enable agent tracing.
#
# If enabled, the default trace mode is "dynamic" and the
# default trace type is "isolated". The trace mode and type are set
# explicity with the `trace_type=` and `trace_mode=` options.
#
# Notes:
#
# - Tracing is ONLY enabled when `enable_tracing` is set: explicitly
# setting `trace_mode=` and/or `trace_type=` without setting `enable_tracing`
# will NOT activate agent tracing.
#
# - See https://github.com/kata-containers/agent/blob/master/TRACING.md for
# full details.
#
# (default: disabled)
#enable_tracing = true
#
#trace_mode = "dynamic"
#trace_type = "isolated"
# Comma separated list of kernel modules and their parameters.
# These modules will be loaded in the guest kernel using modprobe(8).
# The following example can be used to load two kernel modules with parameters
# - kernel_modules=["e1000e InterruptThrottleRate=3000,3000,3000 EEE=1", "i915 enable_ppgtt=0"]
# The first word is considered as the module name and the rest as its parameters.
# Container will not be started when:
# * A kernel module is specified and the modprobe command is not installed in the guest
# or it fails loading the module.
# * The module is not available in the guest or it doesn't met the guest kernel
# requirements, like architecture and version.
#
kernel_modules=[]
[netmon]
# If enabled, the network monitoring process gets started when the
# sandbox is created. This allows for the detection of some additional
# network being added to the existing network namespace, after the
# sandbox has been created.
# (default: disabled)
#enable_netmon = true
# Specify the path to the netmon binary.
path = "/opt/kata/libexec/kata-containers/kata-netmon"
# If enabled, netmon messages will be sent to the system log
# (default: disabled)
enable_debug = {{ kata_containers_qemu_debug }}
[runtime]
# If enabled, the runtime will log additional debug messages to the
# system log
# (default: disabled)
enable_debug = {{ kata_containers_qemu_debug }}
#
# Internetworking model
# Determines how the VM should be connected to the
# the container network interface
# Options:
#
# - macvtap
# Used when the Container network interface can be bridged using
# macvtap.
#
# - none
# Used when customize network. Only creates a tap device. No veth pair.
#
# - tcfilter
# Uses tc filter rules to redirect traffic from the network interface
# provided by plugin to a tap interface connected to the VM.
#
internetworking_model="tcfilter"
# disable guest seccomp
# Determines whether container seccomp profiles are passed to the virtual
# machine and applied by the kata agent. If set to true, seccomp is not applied
# within the guest
# (default: true)
disable_guest_seccomp=true
# If enabled, the runtime will create opentracing.io traces and spans.
# (See https://www.jaegertracing.io/docs/getting-started).
# (default: disabled)
#enable_tracing = true
# If enabled, the runtime will not create a network namespace for shim and hypervisor processes.
# This option may have some potential impacts to your host. It should only be used when you know what you're doing.
# `disable_new_netns` conflicts with `enable_netmon`
# `disable_new_netns` conflicts with `internetworking_model=tcfilter` and `internetworking_model=macvtap`. It works only
# with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge
# (like OVS) directly.
# If you are using docker, `disable_new_netns` only works with `docker run --net=none`
# (default: false)
#disable_new_netns = true
# if enabled, the runtime will add all the kata processes inside one dedicated cgroup.
# The container cgroups in the host are not created, just one single cgroup per sandbox.
# The runtime caller is free to restrict or collect cgroup stats of the overall Kata sandbox.
# The sandbox cgroup path is the parent cgroup of a container with the PodSandbox annotation.
# The sandbox cgroup is constrained if there is no container type annotation.
# See: https://godoc.org/github.com/kata-containers/runtime/virtcontainers#ContainerType
sandbox_cgroup_only={{ kata_containers_qemu_sandbox_cgroup_only }}
# Enabled experimental feature list, format: ["a", "b"].
# Experimental features are features not stable enough for production,
# they may break compatibility, and are prepared for a big version bump.
# Supported experimental features:
# (default: [])
experimental=[]