c12s-kubespray/roles/kubespray-defaults/defaults/main.yaml
Hugo Blom 2abb6c8689 update to kubernetes 1.15.1 (#4989)
* update to kubernetes 1.15.1

* Revert to sonobuoy 0.15.0

* update test timeout from 3 to 5 minutes
2019-07-21 12:24:51 -07:00

510 lines
20 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

---
# Use proxycommand if bastion host is in group all
# This change obseletes editing ansible.cfg file depending on bastion existance
ansible_ssh_common_args: "{% if 'bastion' in groups['all'] %} -o ProxyCommand='ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -W %h:%p {{ hostvars['bastion']['ansible_user'] }}@{{ hostvars['bastion']['ansible_host'] }} {% if ansible_ssh_private_key_file is defined %}-i {{ ansible_ssh_private_key_file }}{% endif %} ' {% endif %}"
kube_api_anonymous_auth: true
# Default value, but will be set to true automatically if detected
is_atomic: false
# optional disable the swap
disable_swap: true
## Change this to use another Kubernetes version, e.g. a current beta release
kube_version: v1.15.1
## The minimum version working
kube_version_min_required: v1.14.0
## Kube Proxy mode One of ['iptables','ipvs']
kube_proxy_mode: ipvs
## Delete kube-proxy daemonset if kube_proxy_remove set, e.g. kube_network_plugin providing proxy services
kube_proxy_remove: "{{ (kube_network_plugin == 'kube-router') and (kube_router_run_service_proxy is defined and kube_router_run_service_proxy)| bool }}"
# A string slice of values which specify the addresses to use for NodePorts.
# Values may be valid IP blocks (e.g. 1.2.3.0/24, 1.2.3.4/32).
# The default empty string slice ([]) means to use all local addresses.
# kube_proxy_nodeport_addresses_cidr is retained for legacy config
kube_proxy_nodeport_addresses: >-
{%- if kube_proxy_nodeport_addresses_cidr is defined -%}
[{{ kube_proxy_nodeport_addresses_cidr }}]
{%- else -%}
[]
{%- endif -%}
# Set to true to allow pre-checks to fail and continue deployment
ignore_assert_errors: false
# nginx-proxy configure
nginx_config_dir: "/etc/nginx"
# haproxy configure
haproxy_config_dir: "/etc/haproxy"
# Directory where the binaries will be installed
bin_dir: /usr/local/bin
docker_bin_dir: /usr/bin
containerd_bin_dir: /usr/bin
etcd_data_dir: /var/lib/etcd
# Where the binaries will be downloaded.
# Note: ensure that you've enough disk space (about 1G)
local_release_dir: "/tmp/releases"
# Random shifts for retrying failed ops like pushing/downloading
retry_stagger: 5
# Install epel repo on Centos/RHEL
epel_enabled: false
# DNS configuration.
# Kubernetes cluster name, also will be used as DNS domain
cluster_name: cluster.local
# Subdomains of DNS domain to be resolved via /etc/resolv.conf for hostnet pods
ndots: 2
# Can be coredns, coredns_dual, manual, or none
dns_mode: coredns
# Enable nodelocal dns cache
enable_nodelocaldns: true
nodelocaldns_ip: 169.254.25.10
nodelocaldns_health_port: 9254
# Should be set to a cluster IP if using a custom cluster DNS
manual_dns_server: ""
# Can be docker_dns, host_resolvconf or none
resolvconf_mode: docker_dns
# Deploy netchecker app to verify DNS resolve as an HTTP service
deploy_netchecker: false
# Ip address of the kubernetes DNS service (called skydns for historical reasons)
skydns_server: "{{ kube_service_addresses|ipaddr('net')|ipaddr(3)|ipaddr('address') }}"
skydns_server_secondary: "{{ kube_service_addresses|ipaddr('net')|ipaddr(4)|ipaddr('address') }}"
dns_domain: "{{ cluster_name }}"
kube_dns_servers:
coredns: ["{{skydns_server}}"]
coredns_dual: "{{[skydns_server] + [ skydns_server_secondary ]}}"
manual: ["{{manual_dns_server}}"]
dns_servers: "{{kube_dns_servers[dns_mode]}}"
enable_coredns_k8s_external: false
coredns_k8s_external_zone: k8s_external.local
# Kubernetes configuration dirs and system namespace.
# Those are where all the additional config stuff goes
# the kubernetes normally puts in /srv/kubernetes.
# This puts them in a sane location and namespace.
# Editing those values will almost surely break something.
kube_config_dir: /etc/kubernetes
kube_script_dir: "{{ bin_dir }}/kubernetes-scripts"
kube_manifest_dir: "{{ kube_config_dir }}/manifests"
# This is where all the cert scripts and certs will be located
kube_cert_dir: "{{ kube_config_dir }}/ssl"
# compatibility directory for kubeadm
kube_cert_compat_dir: "/etc/kubernetes/pki"
# This is where all of the bearer tokens will be stored
kube_token_dir: "{{ kube_config_dir }}/tokens"
# This is where to save basic auth file
kube_users_dir: "{{ kube_config_dir }}/users"
# This is the group that the cert creation scripts chgrp the
# cert files to. Not really changeable...
kube_cert_group: kube-cert
# Cluster Loglevel configuration
kube_log_level: 2
# Users to create for basic auth in Kubernetes API via HTTP
kube_api_pwd: "changeme"
kube_users:
kube:
pass: "{{kube_api_pwd}}"
role: admin
# Choose network plugin (cilium, calico, weave or flannel)
# Can also be set to 'cloud', which lets the cloud provider setup appropriate routing
kube_network_plugin: calico
kube_network_plugin_multus: false
# Determines if calico-rr group exists
peer_with_calico_rr: "{{ 'calico-rr' in groups and groups['calico-rr']|length > 0 }}"
# Set to false to disable calico-upgrade
calico_upgrade_enabled: true
# Kubernetes internal network for services, unused block of space.
kube_service_addresses: 10.233.0.0/18
# internal network. When used, it will assign IP
# addresses from this range to individual pods.
# This network must be unused in your network infrastructure!
kube_pods_subnet: 10.233.64.0/18
# internal network node size allocation (optional). This is the size allocated
# to each node on your network. With these defaults you should have
# room for 64 nodes with 254 pods per node.
# Example: Up to 256 nodes, 100 pods per node (/16 network):
# - kube_service_addresses: 10.233.0.0/17
# - kube_pods_subnet: 10.233.128.0/17
# - kube_network_node_prefix: 25
# Example: Up to 4096 nodes, 100 pods per node (/12 network):
# - kube_service_addresses: 10.192.0.0/13
# - kube_pods_subnet: 10.200.0.0/13
# - kube_network_node_prefix: 25
kube_network_node_prefix: 24
# The virtual cluster IP, real host IPs and ports the API Server will be
# listening on.
# NOTE: loadbalancer_apiserver_localhost somewhat alters the final API enpdoint
# access IP value (automatically evaluated below)
kube_apiserver_ip: "{{ kube_service_addresses|ipaddr('net')|ipaddr(1)|ipaddr('address') }}"
kube_apiserver_bind_address: 0.0.0.0
# https
kube_apiserver_port: 6443
# http
kube_apiserver_insecure_bind_address: 127.0.0.1
kube_apiserver_insecure_port: 0
# If non-empty, will use this string as identification instead of the actual hostname
kube_override_hostname: >-
{%- if cloud_provider is defined and cloud_provider in [ 'aws' ] -%}
{%- else -%}
{{ inventory_hostname }}
{%- endif -%}
# dynamic kubelet configuration
dynamic_kubelet_configuration: false
# define kubelet config dir for dynamic kubelet
# kubelet_config_dir:
default_kubelet_config_dir: "{{ kube_config_dir }}/dynamic_kubelet_dir"
dynamic_kubelet_configuration_dir: "{{ kubelet_config_dir | default(default_kubelet_config_dir) }}"
# Aggregator
kube_api_aggregator_routing: false
# Profiling
kube_profiling: false
# Container for runtime
container_manager: docker
## Uncomment this if you want to force overlay/overlay2 as docker storage driver
## Please note that overlay2 is only supported on newer kernels
# docker_storage_options: -s overlay2
## Enable docker_container_storage_setup, it will configure devicemapper driver on Centos7 or RedHat7.
docker_container_storage_setup: false
## It must be define a disk path for docker_container_storage_setup_devs.
## Otherwise docker-storage-setup will be executed incorrectly.
# docker_container_storage_setup_devs: /dev/vdb
## Uncomment this if you have more than 3 nameservers, then we'll only use the first 3.
docker_dns_servers_strict: false
# Path used to store Docker data
docker_daemon_graph: "/var/lib/docker"
## Used to set docker daemon iptables options to true
docker_iptables_enabled: "false"
# Docker log options
# Rotate container stderr/stdout logs at 50m and keep last 5
docker_log_opts: "--log-opt max-size=50m --log-opt max-file=5"
## A list of insecure docker registries (IP address or domain name), for example
## to allow insecure-registry access to self-hosted registries. Empty by default.
# docker_insecure_registries:
# - mirror.registry.io
# - 172.19.16.11
docker_insecure_registries: []
## A list of additional registry mirrors, for example China registry mirror. Empty by default.
# docker_registry_mirrors:
# - https://registry.docker-cn.com
# - https://mirror.aliyuncs.com
docker_registry_mirrors: []
## If non-empty will override default system MounFlags value.
## This option takes a mount propagation flag: shared, slave
## or private, which control whether mounts in the file system
## namespace set up for docker will receive or propagate mounts
## and unmounts. Leave empty for system default
# docker_mount_flags:
## A string of extra options to pass to the docker daemon.
# docker_options: ""
## A list of plugins to install using 'docker plugin install --grant-all-permissions'
## Empty by default so no plugins will be installed.
docker_plugins: []
# Experimental kubeadm etcd deployment mode. Available only for new deployment
etcd_kubeadm_enabled: false
# Containerd options
containerd_use_systemd_cgroup: false
# Settings for containerized control plane (etcd/kubelet/secrets)
# deployment type for legacy etcd mode
etcd_deployment_type: docker
cert_management: script
helm_deployment_type: host
# Make a copy of kubeconfig on the host that runs Ansible in {{ inventory_dir }}/artifacts
kubeconfig_localhost: false
# Download kubectl onto the host that runs Ansible in {{ bin_dir }}
kubectl_localhost: false
# Define credentials_dir here so it can be overridden
credentials_dir: "{{ inventory_dir }}/credentials"
# K8s image pull policy (imagePullPolicy)
k8s_image_pull_policy: IfNotPresent
# Kubernetes dashboard
# RBAC required. see docs/getting-started.md for access details.
dashboard_enabled: true
# Addons which can be enabled
helm_enabled: false
registry_enabled: false
metrics_server_enabled: false
enable_network_policy: true
local_volume_provisioner_enabled: "{{ local_volumes_enabled | default('false') }}"
local_volume_provisioner_directory_mode: 0700
persistent_volumes_enabled: false
cephfs_provisioner_enabled: false
rbd_provisioner_enabled: false
ingress_nginx_enabled: false
cert_manager_enabled: false
expand_persistent_volumes: false
## When OpenStack is used, Cinder version can be explicitly specified if autodetection fails (Fixed in 1.9: https://github.com/kubernetes/kubernetes/issues/50461)
# openstack_blockstorage_version: "v1/v2/auto (default)"
openstack_blockstorage_ignore_volume_az: "{{ volume_cross_zone_attachment | default('false') }}"
## When OpenStack is used, if LBaaSv2 is available you can enable it with the following 2 variables.
openstack_lbaas_enabled: false
# openstack_lbaas_subnet_id: "Neutron subnet ID (not network ID) to create LBaaS VIP"
## To enable automatic floating ip provisioning, specify a subnet.
# openstack_lbaas_floating_network_id: "Neutron network ID (not subnet ID) to get floating IP from, disabled by default"
## Override default LBaaS behavior
# openstack_lbaas_use_octavia: False
# openstack_lbaas_method: "ROUND_ROBIN"
# openstack_lbaas_provider: "haproxy"
openstack_lbaas_create_monitor: "yes"
openstack_lbaas_monitor_delay: "1m"
openstack_lbaas_monitor_timeout: "30s"
openstack_lbaas_monitor_max_retries: "3"
openstack_cacert: "{{ lookup('env','OS_CACERT') }}"
## List of authorization modes that must be configured for
## the k8s cluster. Only 'AlwaysAllow', 'AlwaysDeny', 'Node' and
## 'RBAC' modes are tested. Order is important.
authorization_modes: ['Node', 'RBAC']
rbac_enabled: "{{ 'RBAC' in authorization_modes }}"
# When enabled, API bearer tokens (including service account tokens) can be used to authenticate to the kubelets HTTPS endpoint
kubelet_authentication_token_webhook: true
# When enabled, access to the kubelet API requires authorization by delegation to the API server
kubelet_authorization_mode_webhook: true
# kubelet uses certificates for authenticating to the Kubernetes API
# Automatically generate a new key and request a new certificate from the Kubernetes API as the current certificate approaches expiration
kubelet_rotate_certificates: true
## v1.11 feature
feature_gate_v1_11:
- "PersistentLocalVolumes={{ local_volume_provisioner_enabled | string }}"
- "VolumeScheduling={{ local_volume_provisioner_enabled | string }}"
- "MountPropagation={{ local_volume_provisioner_enabled | string }}"
## v1.12 feature
feature_gate_v1_12: []
## List of key=value pairs that describe feature gates for
## the k8s cluster.
kube_feature_gates: |-
{{ feature_gate_v1_12 }}
# Enable kubeadm experimental control plane
kubeadm_control_plane: false
# Local volume provisioner storage classes
# Levarages Ansibles string to Python datatype casting. Otherwise the dict_key isn't substituted
# see https://github.com/ansible/ansible/issues/17324
local_volume_provisioner_storage_classes: |
{
"{{ local_volume_provisioner_storage_class | default('local-storage') }}": {
"host_dir": "{{ local_volume_provisioner_base_dir | default ('/mnt/disks') }}",
"mount_dir": "{{ local_volume_provisioner_mount_dir | default('/mnt/disks') }}",
"volume_mode": "Filesystem",
"fs_type": "ext4"
}
}
# weave's network password for encryption
# if null then no network encryption
# you can use --extra-vars to pass the password in command line
weave_password: EnterPasswordHere
# Weave uses consensus mode by default
# Enabling seed mode allow to dynamically add or remove hosts
# https://www.weave.works/docs/net/latest/ipam/
weave_mode_seed: false
# This two variable are automatically changed by the weave's role in group_vars/k8s-cluster.yml.
# Do not manually change these values
weave_seed: uninitialized
weave_peers: uninitialized
# Contiv L3 BGP Mode
contiv_peer_with_uplink_leaf: false
contiv_global_as: "65002"
contiv_global_neighbor_as: "500"
# Set 127.0.0.1 as fallback IP if we do not have host facts for host
fallback_ips_base: |
---
{% for item in groups['k8s-cluster'] + groups['etcd'] + groups['calico-rr']|default([])|unique %}
{{ item }}: "{{ hostvars[item].get('ansible_default_ipv4', {'address': '127.0.0.1'})['address'] }}"
{% endfor %}
fallback_ips: "{{ fallback_ips_base | from_yaml }}"
## Set no_proxy to all assigned cluster IPs and hostnames
no_proxy: >-
{%- if http_proxy is defined or https_proxy is defined %}
{%- if loadbalancer_apiserver is defined -%}
{{ apiserver_loadbalancer_domain_name| default('') }},
{{ loadbalancer_apiserver.address | default('') }},
{%- endif -%}
{%- for item in (groups['k8s-cluster'] + groups['etcd'] + groups['calico-rr']|default([]))|unique -%}
{{ hostvars[item]['access_ip'] | default(hostvars[item]['ip'] | default(fallback_ips[item])) }},
{%- if item != hostvars[item].get('ansible_hostname', '') -%}
{{ hostvars[item]['ansible_hostname'] }},
{{ hostvars[item]['ansible_hostname'] }}.{{ dns_domain }},
{%- endif -%}
{{ item }},{{ item }}.{{ dns_domain }},
{%- endfor -%}
{%- if additional_no_proxy is defined -%}
{{ additional_no_proxy }},
{%- endif -%}
127.0.0.1,localhost
{%- endif %}
proxy_env:
http_proxy: "{{ http_proxy| default ('') }}"
HTTP_PROXY: "{{ http_proxy| default ('') }}"
https_proxy: "{{ https_proxy| default ('') }}"
HTTPS_PROXY: "{{ https_proxy| default ('') }}"
no_proxy: "{{ no_proxy| default ('') }}"
NO_PROXY: "{{ no_proxy| default ('') }}"
ssl_ca_dirs: >-
[
{% if ansible_os_family in ['CoreOS', 'Container Linux by CoreOS'] -%}
'/usr/share/ca-certificates',
{% elif ansible_os_family == 'RedHat' -%}
'/etc/pki/tls',
'/etc/pki/ca-trust',
{% elif ansible_os_family == 'Debian' -%}
'/usr/share/ca-certificates',
{% endif -%}
]
# Vars for pointing to kubernetes api endpoints
is_kube_master: "{{ inventory_hostname in groups['kube-master'] }}"
kube_apiserver_count: "{{ groups['kube-master'] | length }}"
kube_apiserver_address: "{{ ip | default(fallback_ips[inventory_hostname]) }}"
kube_apiserver_access_address: "{{ access_ip | default(kube_apiserver_address) }}"
first_kube_master: "{{ hostvars[groups['kube-master'][0]]['access_ip'] | default(hostvars[groups['kube-master'][0]]['ip'] | default(fallback_ips[groups['kube-master'][0]])) }}"
loadbalancer_apiserver_localhost: "{{ loadbalancer_apiserver is not defined }}"
loadbalancer_apiserver_type: "nginx"
# applied if only external loadbalancer_apiserver is defined, otherwise ignored
apiserver_loadbalancer_domain_name: "lb-apiserver.kubernetes.local"
kube_apiserver_endpoint: |-
{% if loadbalancer_apiserver is defined and loadbalancer_apiserver.port is defined -%}
https://{{ apiserver_loadbalancer_domain_name|default('lb-apiserver.kubernetes.local') }}:{{ loadbalancer_apiserver.port|default(kube_apiserver_port) }}
{%- elif not is_kube_master and loadbalancer_apiserver_localhost -%}
https://localhost:{{ loadbalancer_apiserver_port|default(kube_apiserver_port) }}
{%- elif is_kube_master -%}
https://{{ kube_apiserver_bind_address | regex_replace('0\.0\.0\.0','127.0.0.1') }}:{{ kube_apiserver_port }}
{%- else -%}
https://{{ first_kube_master }}:{{ kube_apiserver_port }}
{%- endif %}
kube_apiserver_insecure_endpoint: >-
http://{{ kube_apiserver_insecure_bind_address | regex_replace('0\.0\.0\.0','127.0.0.1') }}:{{ kube_apiserver_insecure_port }}
kube_apiserver_client_cert: "{{ kube_cert_dir }}/ca.crt"
kube_apiserver_client_key: "{{ kube_cert_dir }}/ca.key"
# Set to true to deploy etcd-events cluster
etcd_events_cluster_enabled: false
# Vars for pointing to etcd endpoints
is_etcd_master: "{{ inventory_hostname in groups['etcd'] }}"
etcd_address: "{{ ip | default(fallback_ips[inventory_hostname]) }}"
etcd_access_address: "{{ access_ip | default(etcd_address) }}"
etcd_events_access_address: "{{ access_ip | default(etcd_address) }}"
etcd_peer_url: "https://{{ etcd_access_address }}:2380"
etcd_client_url: "https://{{ etcd_access_address }}:2379"
etcd_events_peer_url: "https://{{ etcd_events_access_address }}:2382"
etcd_events_client_url: "https://{{ etcd_events_access_address }}:2381"
etcd_access_addresses: |-
{% for item in groups['etcd'] -%}
https://{{ hostvars[item]['access_ip'] | default(hostvars[item]['ip'] | default(fallback_ips[item])) }}:2379{% if not loop.last %},{% endif %}
{%- endfor %}
etcd_events_access_addresses_list: |-
[
{% for item in groups['etcd'] -%}
'https://{{ hostvars[item]['access_ip'] | default(hostvars[item]['ip'] | default(fallback_ips[item])) }}:2381'{% if not loop.last %},{% endif %}
{%- endfor %}
]
etcd_events_access_addresses: "{{etcd_events_access_addresses_list | join(',')}}"
etcd_events_access_addresses_semicolon: "{{etcd_events_access_addresses_list | join(';')}}"
# user should set etcd_member_name in inventory/mycluster/hosts.ini
etcd_member_name: |-
{% for host in groups['etcd'] %}
{% if inventory_hostname == host %}{{ hostvars[host].etcd_member_name | default("etcd" + loop.index|string) }}{% endif %}
{% endfor %}
etcd_peer_addresses: |-
{% for item in groups['etcd'] -%}
{{ hostvars[item].etcd_member_name | default("etcd" + loop.index|string) }}=https://{{ hostvars[item].access_ip | default(hostvars[item].ip | default(fallback_ips[item])) }}:2380{% if not loop.last %},{% endif %}
{%- endfor %}
etcd_events_peer_addresses: |-
{% for item in groups['etcd'] -%}
{{ hostvars[item].etcd_member_name | default("etcd" + loop.index|string) }}-events=https://{{ hostvars[item].access_ip | default(hostvars[item].ip | default(fallback_ips[item])) }}:2382{% if not loop.last %},{% endif %}
{%- endfor %}
podsecuritypolicy_enabled: false
etcd_heartbeat_interval: "250"
etcd_election_timeout: "5000"
etcd_snapshot_count: "10000"
certificates_key_size: 2048
certificates_duration: 36500
pip_extra_args: |-
{%- set pip_extra_args_list = [] -%}
{%- if pyrepo_index is defined -%}
{%- set DO = pip_extra_args_list.append('--index-url %s' | format(pyrepo_index)) -%}
{%- if pyrepo_cert is defined -%}
{%- set DO = pip_extra_args_list.append('--cert %s' | format(pyrepo_cert)) -%}
{%- endif -%}
{%- endif -%}
{{ pip_extra_args_list|join(' ') }}
etcd_config_dir: /etc/ssl/etcd
etcd_cert_dir: "{{ etcd_config_dir }}/ssl"
typha_enabled: false