Moved baseplates to seperate file

gridfinity-rebuild-baseplate.scad

@@ -0,0 +1,46 @@
+include <gridfinity-rebuilt-utility.scad>
+
+// ===== Info ===== //
+/*
+ IMPORTANT: rendering will be better for analyzing the model if fast-csg is enabled. As of writing, this feature is only available in the development builds and not the official release of OpenSCAD, but it makes rendering only take a couple seconds, even for comically large bins. Enable it in Edit > Preferences > Features > fast-csg
+
+https://github.com/kennetek/gridfinity-rebuilt-openscad
+
+*/
+
+/* [Setup Parameters] */
+$fa = 8;
+$fs = 0.25;
+
+/* [General Settings] */
+// number of bases along x-axis
+gridx = 2;  
+// number of bases along y-axis   
+gridy = 2;  
+// bin height. See bin height information and "gridz_define" below.  
+gridz = 6;   
+// base unit
+length = 42;
+
+/* [Base] */
+style_hole = 1; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit, 4: magnet and countersunk screw holes]
+// number of divisions per 1 unit of base along the X axis. (default 1, only use integers. 0 means automatically guess the right division)
+div_base_x = 0;
+// number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division)
+div_base_y = 0; 
+
+/* [Togglles] */
+
+// weigthed baseplate with possibility for magnet / screw holes
+weigthed = true;
+
+// cutout in the bottom for weigthed baseplate only
+bottom_cutout = true;
+
+// ===== Commands ===== //
+
+color("tomato") {
+
+    baseplate(gridx, gridy, length, div_base_x, div_base_y, style_hole, weigthed, bottom_cutout);
+
+}

gridfinity-rebuilt-bins.scad

@@ -25,16 +25,7 @@ https://github.com/kennetek/gridfinity-rebuilt-openscad
 $fa = 8;
 $fs = 0.25;
 
-/* [Objects to generate] */
+/* [General Settings] */
-
-// Generate a gridfinity bin
-generate_bin = true;
-
-// Generate a gridfinity baseplate
-generate_baseplate = false;
-
-
-/* [General Settings (All Objects)] */
 // number of bases along x-axis
 gridx = 2;  
 // number of bases along y-axis   
@@ -44,20 +35,13 @@ gridz = 6;
 // base unit
 length = 42;
 
-/* [Base (All Objects)] */
+/* [Compartments] */
-style_hole = 1; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit, 4: magnet and countersunk screw holes - (baseplate only)]
-// number of divisions per 1 unit of base along the X axis. (default 1, only use integers. 0 means automatically guess the right division)
-div_base_x = 0;
-// number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division)
-div_base_y = 0; 
-
-/* [Compartments (Bin)] */
 // number of X Divisions
 divx = 1;
 // number of y Divisions
 divy = 1;
 
-/* [Toggles (Bin)] */
+/* [Toggles] */
 // internal fillet for easy part removal
 enable_scoop = true;
 // snap gridz height to nearest 7mm increment
@@ -65,7 +49,7 @@ enable_zsnap = false;
 // enable upper lip for stacking other bins
 enable_lip = true;
 
-/* [Other (Bin)] */
+/* [Other] */
 // determine what the variable "gridz" applies to based on your use case
 gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters]
 // the type of tabs
@@ -74,29 +58,24 @@ style_tab = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
 // overrides internal block height of bin (for solid containers). Leave zero for default height. Units: mm
 height_internal = 0; 
 
-/* [Base Plate (Baseplate)] */
+/* [Base] */
+style_hole = 1; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit]
+// number of divisions per 1 unit of base along the X axis. (default 1, only use integers. 0 means automatically guess the right division)
+div_base_x = 0;
+// number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division)
+div_base_y = 0; 
 
-weigthed = true;
 
-bottom_cutout = true;
 
 // ===== Commands ===== //
 
 color("tomato") {
 
-//bin
+gridfinityInit(gridx, gridy, height(gridz, gridz_define, enable_lip, enable_zsnap), height_internal, length) {
-if (generate_bin) {
-    gridfinityInit(gridx, gridy, height(gridz, gridz_define, enable_lip, enable_zsnap), height_internal, length) {
 
     cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, enable_scoop = enable_scoop);
-    }
-    gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole);
-}
-
-//baseplate
-if (generate_baseplate) {
-    baseplate(gridx, gridy, length, div_base_x, div_base_y, style_hole, weigthed, bottom_cutout);
 }
+gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole);
 
 }