Update gridfinity-rebuilt.scad

Added clarity to customizer.
This commit is contained in:
rhandel 2022-09-17 22:15:32 -04:00 committed by GitHub
parent 28d37a547d
commit 9ddc12f19a
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -20,36 +20,53 @@ https://github.com/kennetek/gridfinity-rebuilt-openscad
*/
/**/
/* [Setup Parameters] */
$fa = 8;
$fs = 0.25;
// ===== General Settings ===== //
/* [General Settings] */
gridx = 1; // number of bases along x-axis
gridy = 1; // number of bases along y-axis
gridz = 6; // bin height. See bin height information and "gridz_define" below.
length = 42;// base unit (if you want to go rogue ig)
enable_holes = true; // toggle holes on the base for magnet/screw
enable_hole_slit = true; // extra cut within holes for better slicing
enable_zsnap = false; // round up the bin height to match the closest 7mm unit
enable_lip = true; // toggle the lip on the top of the bin that allows stacking
/* [Divisions] */
// DivX Number of x Divisions
divx = 1; //[1,2,3,4,5,6,7,8,9,10]
// DivY Number of y Divisions
divy = 1; //[1,2,3,4,5,6,7,8,9,10]
/* [Holes] */
// Bottom screw/magnate holes?
enable_holes = true; // [ture:false]
// Extra cut for better slicing
enable_hole_slit = true; // [true:false]
/* [z Snap] */
enable_zsnap = false; // [true:false]
/* [Stacking Lip?] */
enable_lip = true; // [true:false]
// determine what the variable "gridz" applies to based on your use case
// 0: gridz is the height of bins in units (7mm increments)
// 1: gridz is the internal height in millimeters, or how tall an item inside the bin can be
// 2: gridz is the overall external height of the bin in millimeters
gridz_define = 0;
/* [Gridz Define] */
gridz_define = 0; //[0:bin is 7mm increments, 1:Internal height, 2:External height]
/* [Tab Style] */
tab_style = 0; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:No Tab]
/*[Scoop]*/
scoop = true; //[true:false]
// ===== Commands ===== //
color("tomato")
gridfinityEqual(n_divx = 2, n_divy = 1, style_tab = 1, enable_scoop = true);
color("aqua")
gridfinityEqual(n_divx = divx, n_divy = divy, style_tab = tab_style, enable_scoop = scoop);
// ===== Reference Dimensions ===== //
/*[Other features that can be reset]*/
h_base = 5; // height of the base
r_base = 4; // outside rounded radius of bin
r_c1 = 0.8; // lower base chamfer "radius"
@ -133,10 +150,9 @@ gridfinityCustom() {
}*/
// Pyramid scheme bin
/*
gridfinityCustom() {
/* gridfinityCustom() {
for (i = [0:gridx-1])
for (j = [0:i])
cut(j*gridx/(i+1),gridy-i-1,gridx/(i+1),1,0);
}*/