diff --git a/README.md b/README.md
index 25e0a93..1165b22 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # Gridfinity Rebuilt in OpenSCAD 
 
-[![CC BY-NC-SA 4.0][cc-by-nc-sa-shield]][cc-by-nc-sa]
+[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)
 
 A ground-up port (with a few extra features) of the stock [gridfinity](https://www.youtube.com/watch?v=ra_9zU-mnl8) bins in OpenSCAD. Open to feedback, because I could not feasibly test all combinations of bins. I tried my best to exactly match the original gridfinity dimensions, but some of the geometry is slightly incorrect (mainly fillets). However, I think they are negligible differences, and will not appear in the printed model. 
 
@@ -44,10 +44,6 @@ For best results, use a version of OpenSCAD with the fast-csg feature. As of wri
 [Gridfinity](https://www.youtube.com/watch?v=ra_9zU-mnl8) by [Zack Freedman](https://www.youtube.com/c/ZackFreedman/about)
 
 This work is licensed under the same license as Gridfinity, being a 
-[Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
+[MIT License](https://opensource.org/licenses/MIT).
 
-[![CC BY-NC-SA 4.0][cc-by-nc-sa-image]][cc-by-nc-sa]
-
-[cc-by-nc-sa]: http://creativecommons.org/licenses/by-nc-sa/4.0/
-[cc-by-nc-sa-image]: https://licensebuttons.net/l/by-nc-sa/4.0/88x31.png
-[cc-by-nc-sa-shield]: https://img.shields.io/badge/License-CC%20BY--NC--SA%204.0-lightgrey.svg
+[![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT)