Update vase README

This commit is contained in:
Kenneth 2022-09-18 16:58:17 -07:00 committed by GitHub
parent 5077759ada
commit c4703caf30
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -11,21 +11,33 @@ Adaptation of Gridfinity bins to work with spiral vase mode, as to save filament
[<img src="../images/vase_tabs.gif" width="320">]()
## Features
As this script is a child of the `gridfinity-rebuilt-base.scad` script, it has most of the same features. Of course, vase mode does have some limitations (it can only do compartments along the X-axis, not the Y-axis).
As this script is a child of the `gridfinity-rebuilt-base.scad` script, it has most of the same features. Of course, vase mode does have some limitations (it can only do compartments along the X-axis, not the Y-axis). This script is not stand-alone, you must download the full repository for it to work. See the full list of features [here](https://github.com/kennetek/gridfinity-rebuilt-openscad).
## Instructions
Gridfinity is impossible to convert to vase mode due to the geometry of the bases. Thus, how this script gets around the impossible is to use two separate pieces. The bin and bases must be printed separately, and then glued together to form the final bin. There is an added bonus to this method, as for larger bins, you may not need every single grid slot to have a base, you can just have them be on the corners, or the edges, with some in the middle for support. This further saves filament and print time.
Normal Gridfinity is impossible to convert to vase mode due to the geometry of the bases, meaning most existing vase mode Gridfinity models are 1x1 bins, which is very limiting. How this script gets around the impossible is to use two separate pieces. The bin and bases must be printed separately, and then glued together to form the final bin. While this is slightly more work, there is an added bonus to this method, as for larger bins you may not need every single grid slot to have a base, you only really need them on the corners, or the edges, with some in the middle for support. Using less bases saves more filament and print time.
All parameters are global. The customizer has descriptions for all parameters. There are two functions, `gridfinityVase()` and `gridfinityVaseBase()`. The former builds the bin section, while the latter builds a singular base. These should be exported separately.
It is **essential** that the section *Printer Settings* matches your preferred slicer's settings, otherwise the model will not slice correctly.
It is **essential** that the section *Printer Settings* matches your preferred slicer's settings, otherwise the model will not slice correctly. Additionally, you have to turn on the spiral vase parameter in your slicer. If you do not know what vase mode is, [this](https://www.youtube.com/watch?v=HZSFoFYpBaA) is a helpful video.
[<img src="../images/slicer_bin.png" height="200">]()
[<img src="../images/slicer_base.png" height="200">]()
## Statistics
Given how it has become a bit of a [challenge](https://www.printables.com/model/265271-gridfinity-lite-economical-plain-storage-bins) to reduce the weight and print time for these bins, here is a comparison for a large bin:
| Type | Weight | Time |
|--------------|-----------|------------|
Plain 4x2x6 Bin | 114.66g | 3h58m
Vase 4x2x6 Bin with 8 Bases | 68.31g | 2h27m
Vase 4x2x6 Bin with 4 Bases (only corners) | 56.43g | 1h59m
Clearly, vase mode is very quick and quite lightweight. However, this fundamentally means the bins will be weaker, so keep that in mind.
## Recommendations
For best results, use a version of OpenSCAD with the fast-csg feature. As of writing, this feature is only implemented in the [development snapshots](https://openscad.org/downloads.html). To enable the feature, go to Edit > Preferences > Features > fast-csg. On my computer, this sped up rendering from 10 minutes down to a couple of seconds, even for comically large bins.
## Enjoy!
[<img src="./images/spin.gif" width="160">]()
[<img src="../images/spin.gif" width="160">]()
[Gridfinity](https://www.youtube.com/watch?v=ra_9zU-mnl8) by [Zack Freedman](https://www.youtube.com/c/ZackFreedman/about)