mirror of
https://github.com/kennetek/gridfinity-rebuilt-openscad.git
synced 2024-12-22 23:03:28 +00:00
549 lines
16 KiB
OpenSCAD
549 lines
16 KiB
OpenSCAD
include <gridfinity-rebuilt-utility.scad>
|
|
|
|
// ===== INFORMATION ===== //
|
|
/*
|
|
IMPORTANT: rendering will be better for analyzing the model if fast-csg is enabled. As of writing, this feature is only available in the development builds and not the official release of OpenSCAD, but it makes rendering only take a couple seconds, even for comically large bins. Enable it in Edit > Preferences > Features > fast-csg
|
|
|
|
https://github.com/kennetek/gridfinity-rebuilt-openscad
|
|
|
|
*/
|
|
|
|
// ===== PARAMETERS ===== //
|
|
|
|
/* [Special Variables] */
|
|
$fa = 8;
|
|
$fs = 0.25;
|
|
|
|
/* [Bin or Base] */
|
|
type = 0; // [0:bin, 1:base]
|
|
|
|
/* [Printer Settings] */
|
|
// printer nozzle size
|
|
nozzle = 0.6;
|
|
// slicer layer size
|
|
layer = 0.35;
|
|
// number of base layers on build plate
|
|
bottom_layer = 3;
|
|
|
|
/* [General Settings] */
|
|
// number of bases along x-axis
|
|
gridx = 1;
|
|
// number of bases along y-axis
|
|
gridy = 1;
|
|
// bin height. See bin height information and "gridz_define" below.
|
|
gridz = 6;
|
|
// base unit
|
|
length = 42;
|
|
// number of compartments along x-axis
|
|
n_divx = 2;
|
|
|
|
/* [Toggles] */
|
|
// toggle holes on the base for magnet
|
|
enable_holes = true;
|
|
// round up the bin height to match the closest 7mm unit
|
|
enable_zsnap = false;
|
|
// toggle the lip on the top of the bin that allows stacking
|
|
enable_lip = true;
|
|
// chamfer inside bin for easy part removal
|
|
enable_scoop_chamfer = true;
|
|
// funnel-like features on the back of tabs for fingers to grab
|
|
enable_funnel = true;
|
|
// front inset (added for strength when there is a scoop)
|
|
enable_inset = true;
|
|
// "pinches" the top lip of the bin, for added strength
|
|
enable_pinch = true;
|
|
|
|
/* [Styles] */
|
|
// determine what the variable "gridz" applies to based on your use case
|
|
gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters]
|
|
// how tabs are implemented
|
|
style_tab = 0; // [0:continuous, 1:broken, 2:auto, 3:right, 4:center, 5:left, 6:none]
|
|
// where to put X cutouts for attaching bases
|
|
style_base = 0; // [0:all, 1:corners, 2:edges, 3:auto, 4:none]
|
|
|
|
// tab angle
|
|
a_tab = 40;
|
|
|
|
|
|
// ===== IMPLEMENTATION ===== //
|
|
|
|
color("tomato")
|
|
if (type != 0) gridfinityBaseVase(); // Generate a single base
|
|
else gridfinityVase(); // Generate the bin
|
|
|
|
|
|
// ===== CONSTRUCTION ===== //
|
|
|
|
d_bottom = layer*bottom_layer;
|
|
x_l = length/2;
|
|
|
|
dht = (gridz_define==0)?gridz*7 : (gridz_define==1)?h_bot+gridz+h_base : gridz-(enable_lip?3.8:0);
|
|
d_height = (enable_zsnap?((abs(dht)%7==0)?dht:dht+7-abs(dht)%7):dht)-h_base;
|
|
|
|
f2c = sqrt(2)*(sqrt(2)-1); // fillet to chamfer ratio
|
|
me = ((gridx*length-0.5)/n_divx)-nozzle*4-r_fo1-12.7-4;
|
|
m = min(d_tabw/1.8 + max(0,me), d_tabw/1.25);
|
|
d_ramp = f2c*(length*((d_height-2)/7+1)/12-r_f2)+d_wall2;
|
|
d_edge = ((gridx*length-0.5)/n_divx-d_tabw-r_fo1)/2;
|
|
n_st = d_edge < 2 && style_tab != 0 && style_tab != 6 ? 1 : style_tab == 1 && n_divx <= 1? 0 : style_tab;
|
|
|
|
n_x = (n_st==0?1:n_divx);
|
|
spacing = (gridx*length-0.5)/(n_divx);
|
|
shift = n_st==3?-1:n_st==5?1:0;
|
|
shiftauto = function (a,b) n_st!=2?0:a==1?-1:a==b?1:0;
|
|
|
|
xAll = function (a,b) true;
|
|
xCorner = function(a,b) (a==1||a==gridx)&&(b==1||b==gridy);
|
|
xEdge = function(a,b) (a==1)||(a==gridx)||(b==1)||(b==gridy);
|
|
xAuto = function(a,b) xCorner(a,b) || (a%2==1 && b%2 == 1);
|
|
xNone = function(a,b) false;
|
|
xFunc = [xAll, xCorner, xEdge, xAuto, xNone];
|
|
|
|
|
|
module gridfinityVase() {
|
|
$dh = d_height;
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
block_vase_base();
|
|
|
|
if (n_st != 6)
|
|
transform_style()
|
|
transform_vtab_base((n_st<2?gridx*length/n_x-0.5-r_fo1:d_tabw)-nozzle*4)
|
|
block_tab_base(-nozzle*sqrt(2));
|
|
}
|
|
|
|
if (enable_scoop_chamfer)
|
|
intersection() {
|
|
block_vase();
|
|
translate([0,gridy*length/2-0.25-d_wall2/2,d_height/2+0.1])
|
|
cube([gridx*length,d_wall2,d_height-0.2],center=true);
|
|
}
|
|
|
|
if (enable_funnel)
|
|
pattern_linear((n_st==0?n_divx>1?n_divx:gridx:1), 1, (gridx*length-r_fo1)/(n_st==0?n_divx>1?n_divx:gridx:1))
|
|
transform_funnel()
|
|
block_funnel_outside();
|
|
|
|
if (n_divx > 1)
|
|
pattern_linear(n_divx-1,1,(gridx*length-0.5)/(n_divx))
|
|
block_divider();
|
|
|
|
if (n_divx < 1)
|
|
pattern_linear(n_st == 0 ? n_divx>1 ? n_divx-1 : gridx-1 : 1, 1, (gridx*length-r_fo1)/((n_divx>1 ? n_divx : gridx)))
|
|
block_tabsupport();
|
|
}
|
|
|
|
if (enable_funnel)
|
|
pattern_linear((n_st==0?n_divx>1?n_divx:gridx:1), 1, (gridx*length-r_fo1)/(n_st==0?n_divx>1?n_divx:gridx:1))
|
|
transform_funnel()
|
|
block_funnel_inside();
|
|
|
|
if (!enable_lip)
|
|
translate([0,0,1.5*d_height])
|
|
cube([gridx*length,gridy*length,d_height], center=true);
|
|
|
|
block_x();
|
|
block_inset();
|
|
if (enable_pinch)
|
|
block_pinch();
|
|
}
|
|
}
|
|
|
|
module gridfinityBaseVase() {
|
|
difference() {
|
|
union() {
|
|
difference() {
|
|
intersection() {
|
|
block_base_blank(0);
|
|
translate([0,0,-h_base-1])
|
|
rounded_rectangle(length-0.5-0.005, length-0.5-0.005, h_base*10, r_fo1/2+0.001);
|
|
}
|
|
translate([0,0,0.01])
|
|
difference() {
|
|
block_base_blank(nozzle*4);
|
|
translate([0,0,-h_base])
|
|
cube([length*2,length*2,d_bottom*2],center=true);
|
|
}
|
|
// magic slice
|
|
rotate([0,0,90])
|
|
translate([0,0,-h_base+d_bottom+0.01])
|
|
cube([0.001,length*gridx,d_height+d_bottom*2]);
|
|
}
|
|
|
|
pattern_circular(4)
|
|
intersection() {
|
|
rotate([0,0,45])
|
|
translate([-nozzle,3,-h_base+d_bottom+0.01])
|
|
cube([nozzle*2,length*gridx,d_height+d_bottom*2]);
|
|
|
|
block_base_blank(nozzle*4-0.1);
|
|
}
|
|
if (enable_holes)
|
|
pattern_circular(4)
|
|
block_magnet_blank(nozzle);
|
|
}
|
|
if (enable_holes)
|
|
pattern_circular(4)
|
|
block_magnet_blank(0, false);
|
|
|
|
translate([0,0,h_base/2])
|
|
cube([length*2, length*2, h_base], center = true);
|
|
}
|
|
|
|
linear_extrude(d_bottom)
|
|
profile_x(0.1);
|
|
}
|
|
|
|
module block_magnet_blank(o = 0, half = true) {
|
|
translate([d_hole/2,d_hole/2,-h_base+0.1])
|
|
difference() {
|
|
hull() {
|
|
cylinder(r = r_hole2+o, h = h_hole*2, center = true);
|
|
cylinder(r = (r_hole2+o)-(h_base+0.1-h_hole), h = (h_base+0.1)*2, center = true);
|
|
}
|
|
if (half)
|
|
mirror([0,0,1])
|
|
cylinder(r=(r_hole2+o)*2, h = (h_base+0.1)*4);
|
|
}
|
|
}
|
|
|
|
module block_base_blank(o = 0) {
|
|
mirror([0,0,1]) {
|
|
hull() {
|
|
rounded_square(length-o-0.05-2*r_c2-2*r_c1, h_base, r_fo3/2);
|
|
rounded_square(length-o-0.05-2*r_c2, h_base-r_c1, r_fo2/2);
|
|
}
|
|
hull() {
|
|
rounded_square(length-o-0.05-2*r_c2, r_c2, r_fo2/2);
|
|
mirror([0,0,1])
|
|
rounded_square(length-o-0.05, d_bottom, r_fo1/2);
|
|
}
|
|
}
|
|
}
|
|
|
|
module block_pinch() {
|
|
sweep_rounded(gridx*length-2*r_base-0.5-0.001, gridy*length-2*r_base-0.5-0.001)
|
|
translate([r_base,0,0])
|
|
mirror([1,0,0])
|
|
translate([0,-(-d_height-h_base/2+r_c1),0])
|
|
copy_mirror([0,1,0])
|
|
difference() {
|
|
offset(delta = -nozzle*sqrt(2))
|
|
translate([0,-d_height-h_base/2+r_c1,0])
|
|
union() {
|
|
profile_wall_sub();
|
|
mirror([1,0,0])
|
|
square([10,d_height+h_base]);
|
|
}
|
|
|
|
translate([0,-50,0])
|
|
square([100,100], center = true);
|
|
|
|
translate([d_wall2-nozzle*2-d_clear*2,0,0])
|
|
square(r_c2*2);
|
|
}
|
|
}
|
|
|
|
module block_tabsupport() {
|
|
intersection() {
|
|
translate([0,0,0.1])
|
|
block_vase(d_height*4);
|
|
|
|
cube([nozzle*2, gridy*length, d_height*3], center=true);
|
|
|
|
transform_vtab_base(gridx*length*2)
|
|
block_tab_base(-nozzle*sqrt(2));
|
|
}
|
|
}
|
|
|
|
module block_divider() {
|
|
difference() {
|
|
intersection() {
|
|
translate([0,0,0.1])
|
|
block_vase();
|
|
cube([nozzle*2, gridy*length, d_height*2], center=true);
|
|
}
|
|
|
|
if (n_st == 0) block_tab(0.1);
|
|
else block_divider_edgecut();
|
|
|
|
// cut divider clearance on negative Y side
|
|
translate([-gridx*length/2,-(gridy*length/2-0.25),0])
|
|
cube([gridx*length,nozzle*2+0.1,d_height*2]);
|
|
|
|
// cut divider clearance on positive Y side
|
|
mirror([0,1,0])
|
|
if (enable_scoop_chamfer)
|
|
translate([-gridx*length/2,-(gridy*length/2-0.25),0])
|
|
cube([gridx*length,d_wall2+0.1,d_height*2]);
|
|
else block_divider_edgecut();
|
|
|
|
// cut divider to have clearance with scoop
|
|
if (enable_scoop_chamfer)
|
|
transform_scoop()
|
|
offset(delta = 0.1)
|
|
polygon([
|
|
[0,0],
|
|
[d_ramp,d_ramp],
|
|
[d_ramp,d_ramp+nozzle/sqrt(2)],
|
|
[-nozzle/sqrt(2),0]
|
|
]);
|
|
}
|
|
|
|
// divider slices
|
|
difference() {
|
|
for (i = [0:(d_height-d_bottom)/(layer)]) {
|
|
|
|
if (2*i*layer < d_height-layer/2-d_bottom-0.1)
|
|
mirror([0,1,0])
|
|
translate([0,(gridy*length/2-0.25-nozzle)/2,layer/2+d_bottom+2*i*layer])
|
|
cube([nozzle*2-0.01,gridy*length/2-0.25-nozzle,layer],center=true);
|
|
|
|
if ((2*i+1)*layer < d_height-layer/2-d_bottom-0.1)
|
|
translate([0,(gridy*length/2-0.25-nozzle)/2,layer/2+d_bottom+(2*i+1)*layer])
|
|
cube([nozzle*2-0.01,gridy*length/2-0.25-nozzle,layer],center=true);
|
|
|
|
}
|
|
|
|
// divider slices cut to tabs
|
|
if (n_st == 0)
|
|
transform_style()
|
|
transform_vtab_base((n_st<2?gridx*length/n_x-0.5-r_fo1:d_tabw)-nozzle*4)
|
|
block_tab_base(-nozzle*sqrt(2));
|
|
}
|
|
}
|
|
|
|
module block_divider_edgecut() {
|
|
translate([-50,-gridy*length/2+0.25,0])
|
|
rotate([90,0,90])
|
|
linear_extrude(100)
|
|
offset(delta = 0.1)
|
|
profile_wall_sub();
|
|
}
|
|
|
|
module transform_funnel() {
|
|
if (me > 6 && enable_funnel && n_st != 6)
|
|
transform_style()
|
|
render()
|
|
children();
|
|
}
|
|
|
|
module block_funnel_inside() {
|
|
intersection() {
|
|
block_tabscoop(m-nozzle*3*sqrt(2), 0.003, nozzle*2, 0.01);
|
|
block_tab(0.1);
|
|
}
|
|
}
|
|
|
|
module block_funnel_outside() {
|
|
intersection() {
|
|
difference() {
|
|
block_tabscoop(m, 0, 0, 0);
|
|
block_tabscoop(m-nozzle*4*sqrt(2), 0.003, nozzle*2, -1);
|
|
}
|
|
block_tab(-nozzle*sqrt(2)/2);
|
|
}
|
|
}
|
|
|
|
module block_vase_base() {
|
|
difference() {
|
|
// base
|
|
translate([0,0,-h_base]) {
|
|
translate([0,0,-0.1])
|
|
color("firebrick")
|
|
block_bottom(d_bottom, gridx, gridy, length);
|
|
color("royalblue")
|
|
block_wall(gridx, gridy, length) {
|
|
if (enable_lip) profile_wall();
|
|
else profile_wall2();
|
|
}
|
|
}
|
|
|
|
// magic slice
|
|
rotate([0,0,90])
|
|
mirror([0,1,0])
|
|
translate([0,0,d_bottom+0.001])
|
|
cube([0.001,length*gridx,d_height+d_bottom*2]);
|
|
}
|
|
|
|
// scoop piece
|
|
if (enable_scoop_chamfer)
|
|
transform_scoop()
|
|
polygon([
|
|
[0,0],
|
|
[d_ramp,d_ramp],
|
|
[d_ramp,d_ramp+0.6/sqrt(2)],
|
|
[-0.6/sqrt(2),0]
|
|
]);
|
|
|
|
// outside tab cutter
|
|
if (n_st != 6)
|
|
translate([-(n_x-1)*spacing/2,0,0])
|
|
for (i = [1:n_x])
|
|
translate([(i-1)*spacing,0,0])
|
|
translate([shiftauto(i,n_x)*d_edge + shift*d_edge,0,0])
|
|
intersection() {
|
|
block_vase();
|
|
transform_vtab_base(n_st<2?gridx*length/n_x-0.5-r_fo1:d_tabw)
|
|
profile_tab();
|
|
}
|
|
}
|
|
|
|
module profile_wall_sub_sub() {
|
|
polygon([
|
|
[0,0],
|
|
[nozzle*2,0],
|
|
[nozzle*2,d_height-1.2-d_wall2+nozzle*2],
|
|
[d_wall2-d_clear,d_height-1.2],
|
|
[d_wall2-d_clear,d_height+h_base],
|
|
[0,d_height+h_base]
|
|
]);
|
|
}
|
|
|
|
module block_inset() {
|
|
ixx = (gridx*length-0.5)/2;
|
|
iyy = d_height/2+d_bottom*2;
|
|
izz = sqrt(ixx^2+iyy^2)*tan(40);
|
|
if (enable_scoop_chamfer && enable_inset)
|
|
difference() {
|
|
intersection() {
|
|
rotate([0,90,0])
|
|
translate([-iyy+d_bottom*2,0,0])
|
|
block_inset_sub(iyy, gridx*length, 45);
|
|
|
|
rotate([0,90,0])
|
|
translate([-iyy+d_bottom*2,0,0])
|
|
rotate([0,90,0])
|
|
block_inset_sub(ixx, d_height*2, 45);
|
|
}
|
|
|
|
mirror([0,1,0])
|
|
translate([-gridx*length/2,-(gridy*length-0.5)/2+d_wall2-2*nozzle,0])
|
|
cube([gridx*length,izz,d_height*2]);
|
|
}
|
|
}
|
|
|
|
module block_inset_sub(x, y, ang) {
|
|
translate([0,(gridy*length-0.5)/2+r_fo1/2,0])
|
|
mirror([0,1,0])
|
|
linear_extrude(y,center=true)
|
|
polygon([[-x,0],[x,0],[0,x*tan(ang)]]);
|
|
}
|
|
|
|
module transform_style() {
|
|
translate([-(n_x-1)*spacing/2,0,0])
|
|
for (i = [1:n_x])
|
|
translate([(i-1)*spacing,0,0])
|
|
translate([shiftauto(i,n_x)*d_edge + shift*d_edge,0,0])
|
|
children();
|
|
}
|
|
|
|
module block_flushscoop() {
|
|
translate([0,gridy*length/2-d_wall2-nozzle/2-1,d_height/2])
|
|
linear_extrude(d_height)
|
|
union() {
|
|
copy_mirror([1,0,0])
|
|
polygon([[0,0],[gridx*length/2-r_fo1/2,0],[gridx*length/2-r_fo1/2,1],[gridx*length/2-r_fo1/2-r_c1*5,d_wall2-nozzle*2+1],[0,d_wall2-nozzle*2+1]]);
|
|
}
|
|
|
|
transform_scoop()
|
|
polygon([[0,0],[d_ramp,0],[d_ramp,d_ramp]]);
|
|
}
|
|
|
|
module profile_tab() {
|
|
union() {
|
|
copy_mirror([0,1,0])
|
|
polygon([[0,0],[d_tabh*cos(a_tab),0],[d_tabh*cos(a_tab),d_tabh*sin(a_tab)]]);
|
|
}
|
|
}
|
|
|
|
module profile_tabscoop(m) {
|
|
polyhedron([[m/2,0,0],[0,-m,0],[-m/2,0,0],[0,0,m]], [[0,2,1],[1,2,3],[0,1,3],[0,3,2]]);
|
|
}
|
|
|
|
module block_tabscoop(a=m, b=0, c=0, d=-1) {
|
|
translate([0,d_tabh*cos(a_tab)-length*gridy/2+0.25+b,0])
|
|
difference() {
|
|
translate([0,0,-d_tabh*sin(a_tab)*2+d_height+d_bottom*2])
|
|
profile_tabscoop(a);
|
|
|
|
translate([-gridx*length/2,-m,-m])
|
|
cube([gridx*length,m-d_tabh*cos(a_tab)+0.005+c,d_height*2]);
|
|
|
|
if (d >= 0)
|
|
translate([0,0,-d_tabh*sin(a_tab)+d_height+d_bottom*2+m/2+d])
|
|
cube([gridx*length,gridy*length,m],center=true);
|
|
}
|
|
}
|
|
|
|
module transform_vtab(a=0,b=1) {
|
|
transform_vtab_base(gridx*length/b-0.5-r_fo1+a)
|
|
children();
|
|
}
|
|
|
|
module transform_vtab_base(a) {
|
|
translate([0,d_tabh*cos(a_tab)-length*gridy/2+0.25,-d_tabh*sin(a_tab)+d_height+d_bottom*2])
|
|
rotate([90,0,270])
|
|
linear_extrude(a, center=true)
|
|
children();
|
|
}
|
|
|
|
module block_tab(del, b=1) {
|
|
transform_vtab(-nozzle*4, b)
|
|
block_tab_base(del);
|
|
}
|
|
|
|
module block_tab_base(del) {
|
|
offset(delta = del)
|
|
union() {
|
|
profile_tab();
|
|
translate([d_tabh*cos(a_tab),-d_tabh*sin(a_tab),0])
|
|
square([length,d_tabh*sin(a_tab)*2]);
|
|
}
|
|
}
|
|
|
|
module transform_scoop() {
|
|
intersection() {
|
|
block_vase();
|
|
translate([0,gridy*length/2-d_ramp,1.21])
|
|
rotate([90,0,90])
|
|
linear_extrude(2*length*gridx,center=true)
|
|
children();
|
|
}
|
|
}
|
|
|
|
module block_vase(h = d_height*2) {
|
|
translate([0,0,-0.1])
|
|
rounded_rectangle(gridx*length-0.5-nozzle, gridy*length-0.5-nozzle, h, r_base+0.01-nozzle/2);
|
|
}
|
|
|
|
module profile_x(x_f = 3) {
|
|
difference() {
|
|
square([x_l,x_l],center=true);
|
|
|
|
pattern_circular(4)
|
|
translate([0,nozzle*sqrt(2),0])
|
|
rotate([0,0,45])
|
|
translate([x_f,x_f,0])
|
|
minkowski() {
|
|
square([x_l,x_l]);
|
|
circle(x_f);
|
|
}
|
|
}
|
|
}
|
|
|
|
module block_x() {
|
|
translate([-(gridx-1)*length/2,-(gridy-1)*length/2,0])
|
|
for (i = [1:gridx])
|
|
for (j = [1:gridy])
|
|
if (xFunc[style_base](i,j))
|
|
translate([(i-1)*length,(j-1)*length,0])
|
|
block_x_sub();
|
|
}
|
|
|
|
module block_x_sub() {
|
|
linear_extrude(d_bottom*2+0.01,center=true)
|
|
offset(0.05)
|
|
profile_x();
|
|
}
|