mirror of
https://github.com/kennetek/gridfinity-rebuilt-openscad.git
synced 2024-12-22 23:03:28 +00:00
2a21923f4e
Old version of cutters had many shared surfaces which caused lag in preview window and caused fast-csg fail to provide speed boosts. Replaced with minkowski function to get the fillets. Benchmark: 5x3x6-5x2 reduced from 8 minutes to 6 seconds. Fixed a small error with the outer size (42mm to 41.5mm) to account for tolerances. Created gifs to illustrate the scripts functions.
381 lines
11 KiB
OpenSCAD
381 lines
11 KiB
OpenSCAD
$fa = 8;
|
|
$fs = 0.25;
|
|
|
|
// number of bases along x-axis
|
|
gridx = 5;
|
|
|
|
// number of bases along y-axis
|
|
gridy = 3;
|
|
|
|
// unit height along z-axis (2, 3, or 6, but can be any)
|
|
gridz = 6;
|
|
|
|
// number of x compartments (ideally, coprime w/ gridx)
|
|
n_divx = 5;
|
|
|
|
// number of y compartments (ideally, coprime w/ gridy)
|
|
n_divy = 2;
|
|
// set n_div values to 0 for a solid bin (for custom bins)
|
|
|
|
// base unit (if you want to go rogue ig)
|
|
length = 42;
|
|
|
|
// type of tab. alignment only matters if tabs are large enough
|
|
// tab style. 0:full, 1:automatic, 2:left, 3:center, 4:right, 5:none
|
|
style_tab = 1;
|
|
|
|
// the rounded edge that allows for easy removal
|
|
enable_scoop = true;
|
|
|
|
// holes on the base for magnet / screw
|
|
enable_holes = true;
|
|
|
|
// extra cut within holes for better slicing
|
|
enable_hole_slit = true;
|
|
|
|
// ===== Info =====
|
|
|
|
// rendering will be better for analyzing the model if fast-csg is enabled. This feature is only available in the nightly build and not the official release of OpenSCAD, but if makes rendering only take a couple seconds. Enable it in Edit > Preferences > Features > fast-csg
|
|
// the plane that is the top of the internal bin solid is d_height+h_base above z=0
|
|
// the magnet holes have an extra cut in them to make it easier to print without supports
|
|
// tabs will automatically be disabled when gridz is less than 3, as the tabs take up too much space
|
|
|
|
// ===== Dimensions =====
|
|
|
|
h_base = 5; // height of the base
|
|
r_base = 4; // outside rounded radius of bin
|
|
r_c1 = 0.8; // lower base chamfer "radius"
|
|
r_c2 = 2.4; // upper base chamfer "radius"
|
|
h_bot = 2.2; // bottom thiccness of bin
|
|
r_fo1 = 7.5; // outside radii
|
|
r_fo2 = 3.2;
|
|
r_fo3 = 1.6;
|
|
|
|
r_hole1 = 1.5; // screw hole radius
|
|
r_hole2 = 3.25; // magnet hole radius
|
|
d_hole = 26; // center-to-center distance between holes
|
|
h_hole = 2.4; // magnet hole depth
|
|
|
|
r_f1 = 0.6; // top edge fillet radius
|
|
r_f2 = 1.5; // internal fillet radius
|
|
r_f3 = 0.6; // lip fillet radius
|
|
|
|
d_div = 1.2; // width of divider between compartments
|
|
d_wall = 0.95; // minimum wall thickness
|
|
d_clear = 0.25; // tolerance fit factor
|
|
|
|
d_tabh = 15.85; // height of tab (yaxis, measured from inner wall)
|
|
d_tabw = length; // maximum width of tab
|
|
a_tab = 36;
|
|
|
|
d_height = (gridz-1)*7 + 2;
|
|
r_scoop = enable_scoop ? length*gridz/12 - r_f2 : 0; // scoop radius
|
|
d_wall2 = r_base-r_c1-d_clear*sqrt(2);
|
|
d_pitchx = (gridx*length-0.5-2*d_wall-(n_divx-1)*d_div)/n_divx;
|
|
d_pitchy = (gridy*length-0.5-2*d_wall-(n_divy-1)*d_div)/n_divy;
|
|
|
|
|
|
|
|
|
|
color("tomato")
|
|
gridfinity();
|
|
|
|
// ===== Modules =====
|
|
|
|
module gridfinity() {
|
|
difference() {
|
|
// solid bin
|
|
color("firebrick") block_bottom(d_height);
|
|
|
|
// subtraction blocks
|
|
color("sienna") block_cutter();
|
|
}
|
|
|
|
color("orange") block_base();
|
|
color("royalblue") block_wall();
|
|
}
|
|
|
|
module profile_base() {
|
|
polygon([
|
|
[0,0],
|
|
[0,h_base],
|
|
[r_base,h_base],
|
|
[r_base-r_c2,h_base-r_c2],
|
|
[r_base-r_c2,r_c1],
|
|
[r_base-r_c2-r_c1,0]
|
|
]);
|
|
}
|
|
|
|
module block_base() {
|
|
translate([0,0,h_base])
|
|
rounded_rectangle(gridx*length-0.5+0.002, gridy*length-0.5+0.002, h_bot/1.5, r_fo1/2+0.001);
|
|
pattern_linear(gridx, gridy, length)
|
|
render()
|
|
difference() {
|
|
translate([0,0,h_base])
|
|
mirror([0,0,1])
|
|
union() {
|
|
hull() {
|
|
rounded_square(length-0.5-2*r_c2-2*r_c1, h_base, r_fo3/2);
|
|
rounded_square(length-0.5-2*r_c2, h_base-r_c1, r_fo2/2);
|
|
}
|
|
hull() {
|
|
rounded_square(length-0.5-2*r_c2, r_c2, r_fo2/2);
|
|
mirror([0,0,1])
|
|
rounded_square(length-0.5, h_bot/2, r_fo1/2);
|
|
}
|
|
}
|
|
|
|
if (enable_holes)
|
|
pattern_circular(4)
|
|
translate([d_hole/2, d_hole/2, 0]) {
|
|
union() {
|
|
difference() {
|
|
cylinder(h = 2*(h_hole+(enable_hole_slit?0.2:0)), r = r_hole2, center=true);
|
|
if (enable_hole_slit)
|
|
copy_mirror([0,1,0])
|
|
translate([-1.5*r_hole2,r_hole1+0.1,h_hole])
|
|
cube([r_hole2*3,r_hole2*3, 0.4]);
|
|
}
|
|
cylinder(h = 3*h_base, r = r_hole1, center=true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module profile_wall_sub() {
|
|
difference() {
|
|
polygon([
|
|
[0,0],
|
|
[d_wall/2,0],
|
|
[d_wall/2,d_height-1.2-d_wall2+d_wall/2],
|
|
[d_wall2,d_height-1.2],
|
|
[d_wall2,d_height+h_base],
|
|
[0,d_height+h_base]
|
|
]);
|
|
color("red")
|
|
offset(delta = 0.25)
|
|
translate([r_base,d_height,0])
|
|
mirror([1,0,0])
|
|
profile_base();
|
|
square([d_wall,0.1]);
|
|
}
|
|
}
|
|
|
|
module profile_wall() {
|
|
translate([r_base,0,0])
|
|
mirror([1,0,0])
|
|
difference() {
|
|
profile_wall_sub();
|
|
difference() {
|
|
translate([0, d_height+h_base-d_clear*sqrt(2), 0])
|
|
circle(r_base/2);
|
|
offset(r = r_f1)
|
|
offset(delta = -r_f1)
|
|
profile_wall_sub();
|
|
}
|
|
}
|
|
}
|
|
|
|
module block_wall() {
|
|
translate([0,0,h_base])
|
|
sweep_rounded(gridx*length-2*r_base-0.5-0.001, gridy*length-2*r_base-0.5-0.001)
|
|
profile_wall();
|
|
}
|
|
|
|
module block_bottom( h = 2.2 ) {
|
|
translate([0,0,h_base+0.1])
|
|
rounded_rectangle(gridx*length-0.5-d_wall/4, gridy*length-0.5-d_wall/4, d_height-0.1, r_base+0.01);
|
|
}
|
|
|
|
module block_cutter() {
|
|
for (j = [1:n_divy])
|
|
translate(-(j-1)*(d_pitchy + d_div)*[0,1,0])
|
|
for (i = [1:n_divx])
|
|
translate(((i-1)-(n_divx-1)/2)*(d_pitchx + d_div)*[1,0,0])
|
|
translate([0,gridy*length/2-0.25-d_wall,h_base+h_bot])
|
|
rotate([90,0,-90])
|
|
cutter(i,j);
|
|
}
|
|
|
|
module cutter(i,j) {
|
|
|
|
v_len_tab = d_tabh;
|
|
v_len_lip = d_wall2-d_wall+1.2;
|
|
v_cut_tab = d_tabh - (2*r_f1)/tan(a_tab);
|
|
v_cut_lip = d_wall2-d_wall;
|
|
v_ang_tab = a_tab;
|
|
v_ang_lip = 45;
|
|
|
|
enable_tab = style_tab != 5;
|
|
height = d_height;
|
|
extent = (enable_scoop && j==n_divy ? d_wall2-d_wall : 0);
|
|
tab = ((gridz < 3 || style_tab == 5) && j == 1) ? v_len_lip : v_len_tab;
|
|
ang = ((gridz < 3 || style_tab == 5) && j == 1) ? v_ang_lip : v_ang_tab;
|
|
cut = ((gridz < 3 || style_tab == 5) && j == 1) ? v_cut_lip : v_cut_tab;
|
|
style = (style_tab > 1 && style_tab < 5) ? style_tab-3 : (i == 1 ? -1 : i == n_divx ? 1 : 0);
|
|
|
|
if (gridz >= 3 && d_pitchx - d_tabw > 4*r_f2) {
|
|
if (style_tab != 0 && style_tab != 5 && j == 1)
|
|
fillet_cutter(3,"bisque")
|
|
transform_tab(style)
|
|
translate([d_wall2-d_wall,0])
|
|
profile_cutter(height-h_bot, d_pitchy/2);
|
|
|
|
|
|
if (style_tab != 0 && style_tab != 5)
|
|
fillet_cutter(2,"indigo")
|
|
transform_tab(style)
|
|
difference() {
|
|
intersection() {
|
|
profile_cutter(height-h_bot, d_pitchy-extent);
|
|
profile_cutter_tab(height-h_bot, v_len_tab, v_ang_tab);
|
|
}
|
|
if (j==1) profile_cutter_tab(height-h_bot, v_len_lip, 45);
|
|
}
|
|
}
|
|
|
|
if (!(style_tab == 5 && j != 1))
|
|
fillet_cutter(1,"seagreen")
|
|
transform_main()
|
|
translate([cut,0])
|
|
profile_cutter(height-h_bot,d_pitchy/2);
|
|
|
|
fillet_cutter(0,"hotpink")
|
|
transform_main()
|
|
difference() {
|
|
profile_cutter(height-h_bot, d_pitchy-extent);
|
|
|
|
if (!((gridz < 3 || style_tab == 5) && j != 1))
|
|
profile_cutter_tab(height-h_bot, tab, ang);
|
|
|
|
if (!enable_scoop && j == n_divy)
|
|
translate([d_pitchy-extent,0,0])
|
|
mirror([1,0,0])
|
|
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
|
|
}
|
|
|
|
if (!enable_scoop && j == n_divy) {
|
|
fillet_cutter(5,"darkslategray")
|
|
translate([d_pitchy-(d_wall2-d_wall+2*r_f2)-v_cut_lip,0,0])
|
|
transform_main()
|
|
profile_cutter(height-h_bot,d_wall2-d_wall+2*r_f2);
|
|
}
|
|
}
|
|
|
|
module transform_main() {
|
|
translate([0,0,-(d_pitchx-2*r_f2)/2])
|
|
linear_extrude(d_pitchx-2*r_f2)
|
|
children();
|
|
}
|
|
|
|
module transform_tab(type) {
|
|
mirror([0,0,type==1?1:0])
|
|
copy_mirror([0,0,-(abs(type)-1)])
|
|
translate([0,0,-d_pitchx/2])
|
|
translate([0,0,r_f2])
|
|
linear_extrude((d_pitchx-length)/(1-(abs(type)-1))-2*r_f2)
|
|
children();
|
|
}
|
|
|
|
module fillet_cutter(t = 0, c = "goldenrod") {
|
|
color(c)
|
|
minkowski() {
|
|
children();
|
|
sphere(r = r_f2-t/1000);
|
|
}
|
|
}
|
|
|
|
module profile_cutter(h, length) {
|
|
translate([r_f2,r_f2])
|
|
hull() {
|
|
if (length-r_scoop-2*r_f2 > 0)
|
|
square(0.1);
|
|
if (r_scoop < h) {
|
|
translate([length-2*r_f2,h-r_f2/2])
|
|
mirror([1,1])
|
|
square(0.1);
|
|
|
|
translate([0,h-r_f2/2])
|
|
mirror([0,1])
|
|
square(0.1);
|
|
}
|
|
difference() {
|
|
translate([length-r_scoop-2*r_f2, r_scoop])
|
|
if (r_scoop != 0) {
|
|
intersection() {
|
|
circle(r_scoop);
|
|
mirror([0,1]) square(2*r_scoop);
|
|
}
|
|
} else mirror([1,0]) square(0.1);
|
|
translate([length-r_scoop-2*r_f2,-1])
|
|
square([-(length-r_scoop-2*r_f2),2*h]);
|
|
|
|
translate([0,h])
|
|
square([2*length,r_scoop]);
|
|
}
|
|
}
|
|
}
|
|
|
|
module profile_cutter_tab(h, tab, ang) {
|
|
if (tab > 0)
|
|
color("blue")
|
|
offset(delta = r_f2)
|
|
polygon([[0,h],[tab,h],[0,h-tab*tan(ang)]]);
|
|
|
|
}
|
|
|
|
// ==== Utilities =====
|
|
|
|
module rounded_rectangle(length, width, height, rad) {
|
|
linear_extrude(height)
|
|
offset(rad)
|
|
offset(-rad)
|
|
square([length,width], center = true);
|
|
}
|
|
|
|
module rounded_square(length, height, rad) {
|
|
rounded_rectangle(length, length, height, rad);
|
|
}
|
|
|
|
module copy_mirror(vec=[0,1,0]) {
|
|
children();
|
|
if (vec != [0,0,0])
|
|
mirror(vec)
|
|
children();
|
|
}
|
|
|
|
module pattern_linear(x = 1, y = 1, spacing = 0) {
|
|
translate([-(x-1)*spacing/2,-(y-1)*spacing/2,0])
|
|
for (i = [1:x])
|
|
for (j = [1:y])
|
|
translate([(i-1)*spacing,(j-1)*spacing,0])
|
|
children();
|
|
}
|
|
|
|
module pattern_circular(n=2) {
|
|
for (i = [1:n])
|
|
rotate(i*360/n)
|
|
children();
|
|
}
|
|
|
|
module sweep_rounded(w=10, h=10) {
|
|
union() pattern_circular(2) {
|
|
copy_mirror([1,0,0])
|
|
translate([w/2,h/2,0])
|
|
rotate_extrude(angle = 90, convexity = 4)
|
|
children();
|
|
|
|
translate([w/2,0,0])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = h, center = true)
|
|
children();
|
|
|
|
rotate([0,0,90])
|
|
translate([h/2,0,0])
|
|
rotate([90,0,0])
|
|
linear_extrude(height = w, center = true)
|
|
children();
|
|
}
|
|
}
|
|
|