mirror of
https://github.com/kennetek/gridfinity-rebuilt-openscad.git
synced 2024-12-03 21:43:55 +00:00
101 lines
3.4 KiB
OpenSCAD
101 lines
3.4 KiB
OpenSCAD
// ===== INFORMATION ===== //
|
|
/*
|
|
IMPORTANT: rendering will be better in development builds and not the official release of OpenSCAD, but it makes rendering only take a couple seconds, even for comically large bins.
|
|
|
|
https://github.com/kennetek/gridfinity-rebuilt-openscad
|
|
|
|
*/
|
|
|
|
include <src/core/standard.scad>
|
|
use <src/core/gridfinity-rebuilt-utility.scad>
|
|
use <src/core/gridfinity-rebuilt-holes.scad>
|
|
use <src/helpers/generic-helpers.scad>
|
|
|
|
// ===== PARAMETERS ===== //
|
|
|
|
/* [Setup Parameters] */
|
|
$fa = 8;
|
|
$fs = 0.25;
|
|
|
|
/* [General Settings] */
|
|
// number of bases along x-axis
|
|
gridx = 3; //.5
|
|
// number of bases along y-axis
|
|
gridy = 3; //.5
|
|
// bin height. See bin height information and "gridz_define" below.
|
|
gridz = 6;
|
|
|
|
/* [Compartments] */
|
|
// number of X Divisions
|
|
divx = 2;
|
|
// number of y Divisions
|
|
divy = 2;
|
|
|
|
/* [Toggles] */
|
|
// snap gridz height to nearest 7mm increment
|
|
enable_zsnap = false;
|
|
// how should the top lip act
|
|
style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]
|
|
|
|
/* [Other] */
|
|
// determine what the variable "gridz" applies to based on your use case
|
|
gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters]
|
|
// the type of tabs
|
|
style_tab = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
|
|
|
|
/* [Base] */
|
|
// thickness of bottom layer
|
|
bottom_layer = 1;
|
|
|
|
/* [Base Hole Options] */
|
|
// only cut magnet/screw holes at the corners of the bin to save uneccesary print time
|
|
only_corners = false;
|
|
//Use gridfinity refined hole style. Not compatible with magnet_holes!
|
|
refined_holes = false;
|
|
// Base will have holes for 6mm Diameter x 2mm high magnets.
|
|
magnet_holes = true;
|
|
// Base will have holes for M3 screws.
|
|
screw_holes = true;
|
|
// Magnet holes will have crush ribs to hold the magnet.
|
|
crush_ribs = true;
|
|
// Magnet/Screw holes will have a chamfer to ease insertion.
|
|
chamfer_holes = true;
|
|
// Magnet/Screw holes will be printed so supports are not needed.
|
|
printable_hole_top = true;
|
|
|
|
hole_options = bundle_hole_options(refined_holes, magnet_holes, screw_holes, crush_ribs, chamfer_holes, printable_hole_top);
|
|
|
|
// ===== IMPLEMENTATION ===== //
|
|
|
|
// Input all the cutter types in here
|
|
color("tomato")
|
|
render()
|
|
gridfinityLite(gridx, gridy, gridz, gridz_define, style_lip, enable_zsnap, l_grid, hole_options, only_corners) {
|
|
cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, scoop_weight = 0);
|
|
}
|
|
|
|
// ===== CONSTRUCTION ===== //
|
|
|
|
module gridfinityLite(gridx, gridy, gridz, gridz_define, style_lip, enable_zsnap, length, style_hole, only_corners) {
|
|
height_mm = height(gridz, gridz_define, style_lip, enable_zsnap);
|
|
|
|
// Lower the bin start point by this amount.
|
|
// Made up for in bin height.
|
|
// Ensures divider walls smoothly transition to the bottom
|
|
lower_by_mm = BASE_HEIGHT + bottom_layer;
|
|
|
|
difference() {
|
|
translate([0, 0, -lower_by_mm])
|
|
gridfinityInit(gridx, gridy, height_mm+lower_by_mm, 0, length, sl=style_lip)
|
|
children();
|
|
|
|
// Underside of the base. Keep out zone.
|
|
render()
|
|
difference() {
|
|
cube([gridx*length, gridy*length, BASE_HEIGHT*2], center=true);
|
|
gridfinityBase([gridx, gridy], hole_options=style_hole, only_corners=only_corners);
|
|
}
|
|
}
|
|
|
|
gridfinity_base_lite([gridx, gridy], d_wall, bottom_layer, hole_options=style_hole, only_corners=only_corners);
|
|
}
|