#!/bin/bash

#=================================================
# GENERIC START
#=================================================
# IMPORT GENERIC HELPERS
#=================================================

source _common.sh
source /usr/share/yunohost/helpers

#=================================================
# MANAGE SCRIPT FAILURE
#=================================================

ynh_clean_setup () {
	### Remove this function if there's nothing to clean before calling the remove script.
	true
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors

#=================================================
# RETRIEVE ARGUMENTS FROM THE MANIFEST
#=================================================

domain=$YNH_APP_ARG_DOMAIN
path_url=$YNH_APP_ARG_PATH
admin=$YNH_APP_ARG_ADMIN
is_public=$YNH_APP_ARG_IS_PUBLIC
language=$YNH_APP_ARG_LANGUAGE
password=$YNH_APP_ARG_PASSWORD

### If it's a multi-instance app, meaning it can be installed several times independently
### The id of the app as stated in the manifest is available as $YNH_APP_ID
### The instance number is available as $YNH_APP_INSTANCE_NUMBER (equals "1", "2", ...)
### The app instance name is available as $YNH_APP_INSTANCE_NAME
###    - the first time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample
###    - the second time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample__2
###    - ynhexample__{N} for the subsequent installations, with N=3,4, ...
### The app instance name is probably what interests you most, since this is
### guaranteed to be unique. This is a good unique identifier to define installation path,
### db names, ...
app=$YNH_APP_INSTANCE_NAME

#=================================================
# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
#=================================================
### About --weight and --time
### ynh_script_progression will show to your final users the progression of each scripts.
### In order to do that, --weight will represent the relative time of execution compared to the other steps in the script.
### --time is a packager option, it will show you the execution time since the previous call.
### This option should be removed before releasing your app.
### Use the execution time, given by --time, to estimate the weight of a step.
### A common way to do it is to set a weight equal to the execution time in second +1.
### The execution time is given for the duration since the previous call. So the weight should be applied to this previous call.
ynh_script_progression --message="Validating installation parameters..." --time --weight=1

### If the app uses nginx as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
### If the app provides an internal web server (or uses another application server such as uwsgi), the final path should be "/opt/yunohost/$app"
final_path=/var/www/$app
test ! -e "$final_path" || ynh_die --message="This path already contains a folder"

# Register (book) web path
ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url

#=================================================
# STORE SETTINGS FROM MANIFEST
#=================================================
ynh_script_progression --message="Storing installation settings..." --time --weight=1

ynh_app_setting_set --app=$app --key=domain --value=$domain
ynh_app_setting_set --app=$app --key=path --value=$path_url
ynh_app_setting_set --app=$app --key=admin --value=$admin
ynh_app_setting_set --app=$app --key=is_public --value=$is_public
ynh_app_setting_set --app=$app --key=language --value=$language

#=================================================
# STANDARD MODIFICATIONS
#=================================================
# FIND AND OPEN A PORT
#=================================================
ynh_script_progression --message="Configuring firewall..." --time --weight=1

### Use these lines if you have to open a port for the application
### `ynh_find_port` will find the first available port starting from the given port.
### If you're not using these lines:
###		- Remove the section "CLOSE A PORT" in the remove script

# Find an available port
port=$(ynh_find_port --port=8095)
ynh_app_setting_set --app=$app --key=port --value=$port

# Optional: Expose this port publicly
# (N.B. : you only need to do this if the app actually needs to expose the port publicly.
# If you do this and the app doesn't actually need you are CREATING SECURITY HOLES IN THE SERVER !)

# Open the port
# ynh_exec_warn_less yunohost firewall allow --no-upnp TCP $port

#=================================================
# INSTALL DEPENDENCIES
#=================================================
ynh_script_progression --message="Installing dependencies..." --time --weight=1

### `ynh_install_app_dependencies` allows you to add any "apt" dependencies to the package.
### Those deb packages will be installed as dependencies of this package.
### If you're not using this helper:
###		- Remove the section "REMOVE DEPENDENCIES" in the remove script
###		- Remove the variable "pkg_dependencies" in _common.sh
###		- As well as the section "REINSTALL DEPENDENCIES" in the restore script
###		- And the section "UPGRADE DEPENDENCIES" in the upgrade script

ynh_install_app_dependencies $pkg_dependencies

#=================================================
# CREATE A MYSQL DATABASE
#=================================================
ynh_script_progression --message="Creating a MySQL database..." --time --weight=1

### Use these lines if you need a database for the application.
### `ynh_mysql_setup_db` will create a database, an associated user and a ramdom password.
### The password will be stored as 'mysqlpwd' into the app settings,
### and will be available as $db_pwd
### If you're not using these lines:
###		- Remove the section "BACKUP THE MYSQL DATABASE" in the backup script
###		- Remove also the section "REMOVE THE MYSQL DATABASE" in the remove script
###		- As well as the section "RESTORE THE MYSQL DATABASE" in the restore script

db_name=$(ynh_sanitize_dbid --db_name=$app)
db_user=$db_name
ynh_app_setting_set --app=$app --key=db_name --value=$db_name
ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name

#=================================================
# DOWNLOAD, CHECK AND UNPACK SOURCE
#=================================================
ynh_script_progression --message="Setting up source files..." --time --weight=1

### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
### downloaded from an upstream source, like a git repository.
### `ynh_setup_source` use the file conf/app.src

ynh_app_setting_set --app=$app --key=final_path --value=$final_path
# Download, check integrity, uncompress and patch the source from app.src
ynh_setup_source --dest_dir="$final_path"

#=================================================
# NGINX CONFIGURATION
#=================================================
ynh_script_progression --message="Configuring nginx web server..." --time --weight=1

### `ynh_add_nginx_config` will use the file conf/nginx.conf

# Create a dedicated nginx config
ynh_add_nginx_config

#=================================================
# CREATE DEDICATED USER
#=================================================
ynh_script_progression --message="Configuring system user..." --time --weight=1

# Create a system user
ynh_system_user_create --username=$app

#=================================================
# PHP-FPM CONFIGURATION
#=================================================
ynh_script_progression --message="Configuring php-fpm..." --time --weight=1

### `ynh_add_fpm_config` is used to set up a PHP config.
### You can remove it if your app doesn't use PHP.
### `ynh_add_fpm_config` will use the files conf/php-fpm.conf
### If you're not using these lines:
###		- You can remove these files in conf/.
###		- Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
###		- Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
###		- As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
###		With the reload at the end of the script.
###		- And the section "PHP-FPM CONFIGURATION" in the upgrade script

# Create a dedicated php-fpm config
ynh_add_fpm_config

#=================================================
# SPECIFIC SETUP
#=================================================
# ...
#=================================================

#=================================================
# SETUP SYSTEMD
#=================================================
ynh_script_progression --message="Configuring a systemd service..." --time --weight=1

### `ynh_systemd_config` is used to configure a systemd script for an app.
### It can be used for apps that use sysvinit (with adaptation) or systemd.
### Have a look at the app to be sure this app needs a systemd script.
### `ynh_systemd_config` will use the file conf/systemd.service
### If you're not using these lines:
###		- You can remove those files in conf/.
###		- Remove the section "BACKUP SYSTEMD" in the backup script
###		- Remove also the section "STOP AND REMOVE SERVICE" in the remove script
###		- As well as the section "RESTORE SYSTEMD" in the restore script
###		- And the section "SETUP SYSTEMD" in the upgrade script

# Create a dedicated systemd config
ynh_add_systemd_config

#=================================================
# SETUP APPLICATION WITH CURL
#=================================================

### Use these lines only if the app installation needs to be finalized through
### web forms. We generally don't want to ask the final user,
### so we're going to use curl to automatically fill the fields and submit the
### forms.

# Set right permissions for curl install
chown -R $app: $final_path

# Set the app as temporarily public for curl call
ynh_script_progression --message="Configuring SSOwat..." --time --weight=1
ynh_app_setting_set --app=$app --key=skipped_uris --value="/"
# Reload SSOwat config
yunohost app ssowatconf

# Reload Nginx
ynh_systemd_action --service_name=nginx --action=reload

# Installation with curl
ynh_script_progression --message="Finalizing installation..." --time --weight=1
ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"

# Remove the public access
if [ $is_public -eq 0 ]
then
	ynh_app_setting_delete --app=$app --key=skipped_uris
fi

#=================================================
# MODIFY A CONFIG FILE
#=================================================

### `ynh_replace_string` is used to replace a string in a file.
### (It's compatible with sed regular expressions syntax)

ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$final_path/CONFIG_FILE"

#=================================================
# STORE THE CONFIG FILE CHECKSUM
#=================================================

### `ynh_store_file_checksum` is used to store the checksum of a file.
### That way, during the upgrade script, by using `ynh_backup_if_checksum_is_different`,
### you can make a backup of this file before modifying it again if the admin had modified it.

# Calculate and store the config file checksum into the app settings
ynh_store_file_checksum --file="$final_path/CONFIG_FILE"

#=================================================
# GENERIC FINALIZATION
#=================================================
# SECURE FILES AND DIRECTORIES
#=================================================

### For security reason, any app should set the permissions to root: before anything else.
### Then, if write authorization is needed, any access should be given only to directories
### that really need such authorization.

# Set permissions to app files
chown -R root: $final_path

#=================================================
# SETUP LOGROTATE
#=================================================
ynh_script_progression --message="Configuring log rotation..." --time --weight=1

### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
### Use this helper only if there is effectively a log file for this app.
### If you're not using this helper:
###		- Remove the section "BACKUP LOGROTATE" in the backup script
###		- Remove also the section "REMOVE LOGROTATE CONFIGURATION" in the remove script
###		- As well as the section "RESTORE THE LOGROTATE CONFIGURATION" in the restore script
###		- And the section "SETUP LOGROTATE" in the upgrade script

# Use logrotate to manage application logfile(s)
ynh_use_logrotate

#=================================================
# INTEGRATE SERVICE IN YUNOHOST
#=================================================
ynh_script_progression --message="Integrating service in YunoHost..." --time --weight=1

### `yunohost service add` integrates a service in YunoHost. It then gets 
### displayed in the admin interface and through the others `yunohost service` commands.
### (N.B. : this line only makes sense if the app adds a service to the system!)
### If you're not using these lines:
###		- You can remove these files in conf/.
###		- Remove the section "REMOVE SERVICE INTEGRATION IN YUNOHOST" in the remove script
###		- As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script

yunohost service add $app --description "A short description of the app" --log "/var/log/$app/$app.log"

### Additional options starting with 3.8:
###
### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed
###                               which will then be checked by YunoHost's diagnosis system
###                               (N.B. DO NOT USE THIS is the port is only internal !!!)
###
### --test_status "some command"  a custom command to check the status of the service
###                               (only relevant if 'systemctl status' doesn't do a good job)
###
### --test_conf "some command"    some command similar to "nginx -t" that validates the conf of the service
###
### Re-calling 'yunohost service add' during the upgrade script is the right way
### to proceed if you later realize that you need to enable some flags that
### weren't enabled on old installs (be careful it'll override the existing
### service though so you should re-provide all relevant flags when doing so)
###

#=================================================
# START SYSTEMD SERVICE
#=================================================
ynh_script_progression --message="Starting a systemd service..." --time --weight=1

### `ynh_systemd_action` is used to start a systemd service for an app.
### Only needed if you have configure a systemd service
### If you're not using these lines:
###		- Remove the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the backup script
###		- As well as the section "START SYSTEMD SERVICE" in the restore script
###		- As well as the section"STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the upgrade script
###		- And the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the change_url script

# Start a systemd service
ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"

#=================================================
# SETUP FAIL2BAN
#=================================================
ynh_script_progression --message="Configuring fail2ban..." --time --weight=1

# Create a dedicated fail2ban config
ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"

#=================================================
# SETUP SSOWAT
#=================================================
ynh_script_progression --message="Configuring SSOwat..." --time --weight=1

# Make app public if necessary
if [ $is_public -eq 1 ]
then
	# unprotected_uris allows SSO credentials to be passed anyway.
	ynh_app_setting_set --app=$app --key=unprotected_uris --value="/"
fi

#=================================================
# RELOAD NGINX
#=================================================
ynh_script_progression --message="Reloading nginx web server..." --time --weight=1

ynh_systemd_action --service_name=nginx --action=reload

#=================================================
# END OF SCRIPT
#=================================================

ynh_script_progression --message="Installation of $app completed" --time --last