gridfinity-rebuilt-openscad.../gridfinity-rebuilt-lite.scad

93 lines
3.5 KiB
OpenSCAD
Raw Normal View History

2022-11-06 06:19:56 +00:00
include <gridfinity-rebuilt-utility.scad>
2022-11-17 19:58:46 +00:00
// ===== INFORMATION ===== //
/*
IMPORTANT: rendering will be better for analyzing the model if fast-csg is enabled. As of writing, this feature is only available in the development builds and not the official release of OpenSCAD, but it makes rendering only take a couple seconds, even for comically large bins. Enable it in Edit > Preferences > Features > fast-csg
https://github.com/kennetek/gridfinity-rebuilt-openscad
*/
// ===== PARAMETERS ===== //
2022-11-06 06:19:56 +00:00
/* [Setup Parameters] */
$fa = 8;
$fs = 0.25;
/* [General Settings] */
// number of bases along x-axis
gridx = 3;
// number of bases along y-axis
gridy = 3;
// bin height. See bin height information and "gridz_define" below.
gridz = 6;
// base unit
length = 42;
/* [Compartments] */
// number of X Divisions
divx = 2;
// number of y Divisions
divy = 2;
/* [Toggles] */
// snap gridz height to nearest 7mm increment
enable_zsnap = false;
// how should the top lip act
style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]
2022-11-06 06:19:56 +00:00
/* [Other] */
// determine what the variable "gridz" applies to based on your use case
gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters]
// the type of tabs
style_tab = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
/* [Base] */
2022-11-18 01:26:43 +00:00
style_hole = 0; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit]
2022-11-06 06:19:56 +00:00
// number of divisions per 1 unit of base along the X axis. (default 1, only use integers. 0 means automatically guess the right division)
div_base_x = 0;
// number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division)
div_base_y = 0;
2022-11-17 19:58:46 +00:00
// ===== IMPLEMENTATION ===== //
2022-11-06 06:19:56 +00:00
// Input all the cutter types in here
2022-11-18 01:26:43 +00:00
color("tomato")
gridfinityLite(gridx, gridy, gridz, gridz_define, style_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole) {
cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, scoop_weight = 0);
2022-11-06 06:19:56 +00:00
}
2022-11-17 19:58:46 +00:00
// ===== CONSTRUCTION ===== //
2022-11-06 06:19:56 +00:00
module gridfinityLite(gridx, gridy, gridz, gridz_define, style_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole) {
2022-11-06 06:19:56 +00:00
difference() {
union() {
gridfinityInit(gridx, gridy, height(gridz, gridz_define, style_lip, enable_zsnap), 0, length)
2022-11-18 01:26:43 +00:00
children();
gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole);
}
difference() {
union() {
intersection() {
difference() {
gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole, -d_wall*2, false);
translate([-gridx*length/2,-gridy*length/2,2*h_base])
cube([gridx*length,gridy*length,1000]);
}
translate([0,0,-1])
rounded_rectangle(gridx*length-0.5005-d_wall*2, gridy*length-0.5005-d_wall*2, 1000, r_f2);
2022-11-06 06:19:56 +00:00
}
2022-11-18 01:26:43 +00:00
translate([0,0,h_base+d_clear])
rounded_rectangle(gridx*length-0.5005-d_wall*2, gridy*length-0.5005-d_wall*2, h_base, r_f2);
2022-11-06 06:19:56 +00:00
}
2022-11-18 01:26:43 +00:00
translate([0,0,-4*h_base])
gridfinityInit(gridx, gridy, height(20,0), 0, length)
children();
2022-11-06 06:19:56 +00:00
}
}
}