Merge branch 'main' into main

This commit is contained in:
Kenneth 2023-02-15 18:57:02 -07:00 committed by GitHub
commit 0ae9d40442
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
33 changed files with 505 additions and 53 deletions

2
.gitignore vendored
View file

@ -3,6 +3,4 @@ ignore/
gridfinity-rebuilt.json gridfinity-rebuilt.json
stl/ stl/
batch/ batch/
docs/
site/ site/
mkdocs.yml

41
docs/baseplates.md Normal file
View file

@ -0,0 +1,41 @@
# gridfinity-rebuilt-baseplate
To round out the rebuilt catalog, we have baseplates. Originally, baseplates were not included as there was not anything really interesting to parameterize, unlike with bins. However, upon closer inspection, there is a couple things that would make peoples' lives easier. For instance, what is called here the "skeletonized" style, in that the baseplate is still thick to allow for magnets, but the center portion is removed. Additionally, being able to generate spacers for the sides of the bases, so that they fit perfectly inside your drawers.
![Bin](images/baseplate.gif)
## Script Parameters
Parameter | Range | Description
--- | ----- | ---
gridx | { n>=0 \| n∈R } | number of bases along the x-axis<br> If set to zero, will fill with as many <br>bases that fit within `distancex`
gridy | { n>=0 \| n∈R } | number of bases along the y-axis<br> If set to zero, will fill with as many <br>bases that fit within `distancey`
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of Life, <br>the Universe, and Everything.)
distancex | { n>0 \| n∈R } | minimum length of baseplate along x <br>alternatively, how large is the drawer along x <br>(leave zero to ignore)
distancey | { n>0 \| n∈R } | minimum length of baseplate along y <br>alternatively, how large is the drawer along y <br>(leave zero to ignore)
fitx | { -1<=n<=1 \| n∈R } | alignment factor for extra space along x axis
fity | { -1<=n<=1 \| n∈R } | alignment factor for extra space along y axis
style_plate | { 0, 1, 2 } | the style of baseplate <br> • (0) thin (minimum material, only outline) <br> • (1) weighted (thick with space for tire iron) <br> • (2) skeletonized (thick, center hollowed)
enable_magnet | boolean | toggle hole for magnet on top
style_hole | { 0, 1, 2 } | the style of holes underneath the baseplate, if applicable <br> • (0) none <br> • (1) countersink <br> • (2) counterbore
## Modules
### gridfinityBaseplate
Generates a baseplate to use with gridfinity bins.
** `gridfinityBaseplate(gridx, gridy, length, distancex, distancey, style_plate, enable_magnet, style_hole)` **
Parameter | Range | Description
--- | ----- | ---
gridx | { n>=0 \| n∈R } | number of bases along the x-axis<br> If set to zero, will fill with as many <br>bases that fit within `distancex`
gridy | { n>=0 \| n∈R } | number of bases along the y-axis<br> If set to zero, will fill with as many <br>bases that fit within `distancey`
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of Life, <br>the Universe, and Everything.)
distancex | { n>0 \| n∈R } | minimum length of baseplate along x <br>alternatively, how large is the drawer along x <br>(leave zero to ignore)
distancey | { n>0 \| n∈R } | minimum length of baseplate along y <br>alternatively, how large is the drawer along y <br>(leave zero to ignore)
fitx | { -1<=n<=1 \| n∈R } | alignment factor for extra space along x axis
fity | { -1<=n<=1 \| n∈R } | alignment factor for extra space along y axis
style_plate | { 0, 1, 2 } | the style of baseplate <br> • (0) thin (minimum material, only outline) <br> • (1) weighted (thick with space for tire iron) <br> • (2) skeletonized (thick, center hollowed)
enable_magnet | boolean | toggle hole for magnet on top
style_hole | { 0, 1, 2 } | the style of holes underneath the baseplate, if applicable <br> • (0) none <br> • (1) countersink <br> • (2) counterbore

172
docs/bins.md Normal file
View file

@ -0,0 +1,172 @@
# gridfinity-rebuilt-bins
Generates stock bins, with a great number of variations.
![Bin](images/custom_dimension.gif)
## Script Parameters
Parameter | Range | Description
--- | ----- | ---
gridx | { n>0 \| n∈R } | number of bases along the x-axis
gridy | { n>0 \| n∈R } | number of bases along the y-axis
gridz | { n>0 \| n∈R } | bin height. See bin height information and "gridz_define" below.
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of Life, <br>the Universe, and Everything.)
divx | { n>0 \| n∈Z } | number of compartments along X
divy | { n>0 \| n∈Z } | number of compartments along Y
scoop | n>0 \| n∈R | controls the fillet on the bottom of the compartment for easy <br> item removal. 0 is disabled, 1 is full, any other real number will <br> scale from full.
enable_zsnap | boolean | automatically snap the bin size to the nearest 7mm increment. <br> default: true
style_lip | {0, 1, 2} | if you are not stacking the bin, you can disable the top lip <br> to save space. <br> • (0) Regular lip <br> • (1) Subtract lip to save space <br> • (2) Disable lip while retaining height
gridz_define | { n>0 \| n∈R } | determine what the variable "gridz" applies to based on <br> your use case. default: 0. <br> • (0) gridz is the height in # of 7mm increments (Zack) <br> • (1) gridz is the internal height in millimeters <br> • (2) gridz is the overall external height of the bin in millimeters
height_internal | { n>0 \| n∈R } | height of the internal block. <br> Can be lower than bin height to save filament on custom bins. <br> default of 0 means use the calculated height.
style_tab | { 0, 1, 2, 3, 4, 5 } | how the tabs for labels are generated. <br> • (0) Full tabs across the entire compartment <br> • (1) automatic tabs <br> - left aligned tabs on the left edge<br> - right aligned tabs on right edge<br> - center tabs otherwise <br> • (2) left aligned tabs <br> • (3) center aligned tabs <br> • (4) right aligned tabs <br> • (5) no tabs
style_hole | { 0, 1, 2, 3 } | the style of holes in the bases <br> • (0) No holes <br> • (1) Magnet holes only <br> • (2) Magnet and screw holes - no printable slit <br> • (3) Magnet and screw holes - with printable slit
div_base_x | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the X axis. <br>(default 1, only use integers. <br>0 means automatically guess the division)
div_base_y | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the Y axis. <br>(default 1, only use integers. <br>0 means automatically guess the division)
<br>
## Modules
---
### gridfinityInit
Initializes the top part of the bin (walls and solid section). All bins have to use this module, and have the compartments cut out from it.
** `gridfinityInit (gridx, gridy, height, height_internal, length)` **
Parameter | Range | Description
--- | ----- | ---
gridx | { n>0 \| n∈R } | number of bases along the x-axis
gridy | { n>0 \| n∈R } | number of bases along the y-axis
height | { n>0 \| n∈R } | height of the bin, in millimeters (but not exactly). <br> See the `height()` function for more info.
height_internal | { n>0 \| n∈R } | height of the internal block. <br> Can be lower than bin height to save filament on custom bins. <br> default of 0 means use the calculated height.
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of Life, <br>the Universe, and Everything.)
```
// Example: generate a 3x3x6 bin with a 42mm unit size
gridfinityInit(3, 3, height(6), 0, 42) {
cutEqual(n_divx = 3, n_divy = 3, style_tab = 0, scoop_weight = 1);
}
```
---
### height
Calculates the proper height for bins.
** `height (gridz, gridz_define, style_lip, enable_zsnap)` **
Parameter | Range | Description
--- | ----- | ---
gridz | { n>0 \| n∈R } | bin height. See bin height information and "gridz_define" below.
gridz_define | { n>0 \| n∈R } | determine what the variable "gridz" applies to based on <br> your use case. default: 0. <br> • (0) gridz is the height in # of 7mm increments (Zack) <br> • (1) gridz is the internal height in millimeters <br> • (2) gridz is the overall external height of the bin in millimeters
style_lip | {0, 1, 2} | if you are not stacking the bin, you can disable the top lip <br> to save space. <br> • (0) Regular lip <br> • (1) Subtract lip to save space <br> • (2) Disable lip while retaining height
enable_zsnap | boolean | automatically snap the bin size to the nearest 7mm increment. <br> default: true
```
// Example: height for a 6 unit high bin
height(6);
// Example: height for a bin that can fit (at maximum) a 30mm high object inside
height(30, 1, 0, false);
```
---
### gridfinityBase
Generates the bases for bins. Has various different hole styles, and can be subdivided.
** `gridfinityBase (gridx, gridy, length, div_base_x, div_base_y, style_hole)` **
Parameter | Range | Description
--- | ----- | ---
gridx | { n>0 \| n∈R } | number of bases along the x-axis
gridy | { n>0 \| n∈R } | number of bases along the y-axis
length | { n>0 \| n∈R } | length of one unit of the base. default: 42
div_base_x | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the X axis. <br>(default 1, only use integers. 0 means automatically guess the division)
div_base_y | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the Y axis. <br>(default 1, only use integers. 0 means automatically guess the division)
style_hole | { 0, 1, 2, 3 } | the style of holes in the bases <br> • (0) No holes <br> • (1) Magnet holes only <br> • (2) Magnet and screw holes - no printable slit <br> • (3) Magnet and screw holes - with printable slit
```
// Example: generate a 3x3 base with a 42mm unit size and clean magnet holes
gridfinityBase(3, 3, 42, 0, 0, 1);
```
---
### cutEqual
Generates the "traditional" bin cutters. It is a utility function that creates evenly distributed compartments.
** `cutEqual (n_divx, n_divy, style_tab, scoop_weight)` **
Parameter | Range | Description
--- | ----- | ---
n_divx | { n>0 \| n∈Z } | number of compartments along X
n_divy | { n>0 \| n∈Z } | number of compartments along Y
style_tab | { 0, 1, 2, 3, 4, 5 } | how the tabs for labels are generated. <br> • (0) Full tabs across the entire compartment <br> • (1) automatic tabs <br> - left aligned tabs on the left edge<br> - right aligned tabs on right edge<br> - center tabs otherwise <br> • (2) left aligned tabs <br> • (3) center aligned tabs <br> • (4) right aligned tabs <br> • (5) no tabs
scoop | n>0 \| n∈R | controls the fillet on the bottom of the compartment for easy <br> item removal. 0 is disabled, 1 is full, any other real number will <br> scale from full.
```
// Example: this generates 9 compartments in a 3x3 grid, and all compartments have a full tab and a scoop
gridfinityInit(3, 3, height(6), 0, 42) {
cutEqual(n_divx = 3, n_divy = 3, style_tab = 0, scoop_weight = 1);
}
```
---
### cut
Cuts a single compartment into the bin at the provided location with the provided attributes. The coordinate system for compartments originates (0,0) at the bottom left corner of the bin, where 1 unit is the length of 1 base. Positive X and positive Y are in the same direction as the global coordinate system.
** `cut (x, y, w, h, t, s)` **
Parameter | Range | Description
--- | ----- | ---
x | { n>=0 \| n∈R } | X coordinate of the compartment <br>(position of left edge of compartment)
y | { n>=0 \| n∈R } | Y coordinate of the compartment <br>(position of bottom edge of compartment)
w | { n>0 \| n∈R } | Width of the compartment, in base units <br>(1 unit = 1 `length`)
h | { n>0 \| n∈R } | Height of the compartment, in base units <br>(1 unit = 1 `length`)
t | { 0, 1, 2, 3, 4, 5 } | how the tabs for labels are generated for this compartment. <br> • (0) Full tabs across the entire compartment <br> • (1) automatic tabs <br> - left aligned tabs on the left edge<br> - right aligned tabs on right edge<br> - center tabs otherwise <br> • (2) left aligned tabs <br> • (3) center aligned tabs <br> • (4) right aligned tabs <br> • (5) no tabs
s | n>0 \| n∈R | controls the fillet on the bottom of the compartment for easy <br> item removal. 0 is disabled, 1 is full, any other real number will <br> scale from full, only for this specific compartment
```
// Example:
// this cuts two compartments that are both 1 wide and 2 high.
// One is on the bottom left, and the other is at the top right.
gridfinityInit(3, 3, height(6), 0, 42) {
cut(0, 0, 1, 2, 0, 1);
cut(2, 1, 1, 2, 0, 1);
}
```
---
### cut_move
Moves all of its children from the global origin to the center of the area that a compartment would normally fill, and uses them to cut from the bin. This allows you to easily make custom cutouts in the bin.
** `cut_move (x, y, w, h)` **
Parameter | Range | Description
--- | ----- | ---
x | { n>=0 \| n∈R } | X coordinate of the area (position of left edge)
y | { n>=0 \| n∈R } | Y coordinate of the area (position of bottom edge)
w | { n>0 \| n∈R } | Width of the area, in base units (1 unit = 1 `length`)
h | { n>0 \| n∈R } | Height of the area, in base units (1 unit = 1 `length`)
```
// Example:
// cuts a cylindrical hole of radius 5
// hole center is located 1/2 units from the right edge of the bin, and 1 unit from the top
gridfinityInit(3, 3, height(6), 0, 42) {
cut_move(x=2, y=1, w=1, h=2) {
cylinder(r=5, h=100, center=true);
}
}
```

38
docs/constants.md Normal file
View file

@ -0,0 +1,38 @@
# gridfinity-rebuilt-constants
This file contains dimensions that are critical to the constructiuon of the other models, but are not values that often need to be changed. Thus, they were outsourced to this file such that the rest of the files would retain parity. All values here have the same range, this is positive real numbers. Some can be zero, but that may result in strange or invalid geometry,
Parameter | Description
--- | ------
h_base | height of the base
r_base| outside rounded radius of bin
r_c1 | lower base chamfer "radius"
r_c2 | upper base chamfer "radius"
h_bot| bottom thiccness of bin
r_fo1| outside radii 1
r_fo2| outside radii 2
r_fo3 | outside radii 3
r_hole1| screw hole radius
r_hole2| magnet hole radius
d_hole| center-to-center distance between holes
h_hole| magnet hole depth
h_slit| slit depth (printer layer height)
r_f1| top edge fillet radius
r_f2 | internal fillet radius
d_div | width of divider between compartments
d_wall| minimum wall thickness
d_clear| tolerance fit factor
d_tabh| height of tab (yaxis, measured from inner wall)
d_tabw| maximum width of tab
a_tab| angle of tab
bp_h_bot| Baseplate bottom part height (part added with weigthed=true)
bp_cut_size| Baseplate bottom cutout rectangle size
bp_cut_depth| Baseplate bottom cutout rectangle depth
bp_rcut_width| Baseplate bottom cutout finger gap width
bp_rcut_length| Baseplate bottom cutout finger gap left
bp_rcut_depth| Baseplate bottom cutout finger gap depth
d_cs | countersink diameter for baseplate
r_skel| radius of cutout for skeletonized baseplate
r_cb| baseplate counterbore radius
h_cb| baseplate counterbore depth
h_skel | minimum baseplate thickness (when skeletonized)

Binary file not shown.

After

Width:  |  Height:  |  Size: 674 KiB

BIN
docs/images/baseplate.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 121 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.3 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 166 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 1,013 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 295 KiB

BIN
docs/images/lite.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 177 KiB

BIN
docs/images/slicer_base.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 205 KiB

BIN
docs/images/slicer_bin.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 256 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 367 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 335 KiB

BIN
docs/images/spin.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 460 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.2 MiB

BIN
docs/images/vase_base.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 16 KiB

BIN
docs/images/vase_bottom.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 21 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 118 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 53 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 43 KiB

BIN
docs/images/vase_tabs.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 137 KiB

22
docs/index.md Normal file
View file

@ -0,0 +1,22 @@
## Introduction
Gridfinity rebuilt aims to remake the brilliant Gridfinity project from [Zack Freedman](https://www.youtube.com/c/ZackFreedman/about) in a more robust and open-source way than the original Fusion 360 files. Many major CAD suites struggle with making parametric models constructed from linear patterns, due to changing fillet edges and seams. Thus, a pure mathematical approach using OpenSCAD can allow a single solution for all possible bin variants.
The project has expanded into more eccentric models that use modules from the original generator. This wiki aims to document these modules in great detail.
Models are generated subtractively. First, the solid bin and bases are constructed, and then the compartments and holes are removed. This allows for internal fillets that nearly match the originals. However, they are not exactly perfect. There are some fillets that are too small and too difficult to be worth implementing, as most printers do not have a high enough resolution for it to matter.
## Getting Started
For best results, use a version of OpenSCAD with the fast-csg feature. As of writing, this feature is only implemented in the [development snapshots](https://openscad.org/downloads.html). To enable the feature, go to Edit > Preferences > Features > fast-csg. This can speed up rendering from 10 minutes down to a couple of seconds, even for comically large bins. It is not a requirement to use development versions of OpenSCAD.
Most files will come ready-to-run, so parameters can be changed using OpenSCAD's built-in customizer window, and the bins will automatically generate. However, all modules are packed up nicely, so any module can be imported into other files or have more custom modifications beyond tweaking the parameters.
## Script Structure
* Information (Imports / Script Details)
* Parameters (Shown in Customizer)
* Implementation (Executing the Parameters)
* Construction (Script-Specific Modules and Constants)
* Examples
The two files which do not follow these conventions are `gridfinity-rebuilt-utility` and `gridfinity-rebuilt-constants`. These files are not meant to be exposed to the user, except for special requirements that the normal parameters cannot handle. Their respective wiki pages go into more depth.
**NOTE: This documentation is a work in progress, just like the rest of the repository, so parts may still be under construction.**

55
docs/lite.md Normal file
View file

@ -0,0 +1,55 @@
# gridfinity-rebuilt-lite
Generates stock bins, but with a twist: the bases are hollow. This is unable to be implemented directly into `gridfinity-rebuilt-bins` due to its surprisingly complex construction. It couldn't be a toggle without causing the structure of the script to fundamentally change (and become more complex) so it was moved to a separate file. Notably, there are some parameters missing, as they are incompatible with the lite variation. Additionally, the complex geometry means rendering is fairly slow, and currently causes many CSG errors.
![Bin](images/lite.gif)
## Script Parameters
Parameter | Range | Description
--- | ----- | ---
gridx | { n>0 \| n∈R } | number of bases along the x-axis
gridy | { n>0 \| n∈R } | number of bases along the y-axis
gridz | { n>0 \| n∈R } | bin height. See bin height information and "gridz_define" below.
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of Life, <br>the Universe, and Everything.)
divx | { n>0 \| n∈Z } | number of compartments along X
divy | { n>0 \| n∈Z } | number of compartments along Y
enable_zsnap | boolean | automatically snap the bin size to the nearest 7mm increment. <br> default: true
style_lip | {0, 1, 2} | if you are not stacking the bin, you can disable the top lip <br> to save space. <br> • (0) Regular lip <br> • (1) Subtract lip to save space <br> • (2) Disable lip while retaining height
gridz_define | { n>0 \| n∈R } | determine what the variable "gridz" applies to based on <br> your use case. default: 0. <br> • (0) gridz is the height in # of 7mm increments (Zack) <br> • (1) gridz is the internal height in millimeters <br> • (2) gridz is the overall external height of the bin in millimeters
style_tab | { 0, 1, 2, 3, 4, 5 } | how the tabs for labels are generated. <br> • (0) Full tabs across the entire compartment <br> • (1) automatic tabs <br> - left aligned tabs on the left edge<br> - right aligned tabs on right edge<br> - center tabs otherwise <br> • (2) left aligned tabs <br> • (3) center aligned tabs <br> • (4) right aligned tabs <br> • (5) no tabs
style_hole | { 0, 1, 2, 3 } | the style of holes in the bases <br> • (0) No holes <br> • (1) Magnet holes only <br> • (2) Magnet and screw holes - no printable slit <br> • (3) Magnet and screw holes - with printable slit
div_base_x | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the X axis. <br>(default 1, only use integers. <br>0 means automatically guess the division)
div_base_y | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the Y axis. <br>(default 1, only use integers. <br>0 means automatically guess the division)
<br>
## Modules
---
### gridfinityLite
Wrapper function that calls [`gridfinityInit`](bins.md#gridfinityInit) and [`gridfinityBase`](bins.md#gridfinityBase) functions (hence the sheer quantity of parameters). Like [`gridfinityInit`](bins.md#gridfinityInit), it uses its children as cutters for the compartments.
**`gridfinityLite(gridx, gridy, gridz, gridz_define, enable_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole)`**
Parameter | Range | Description
--- | ----- | ---
gridx | { n>0 \| n∈R } | number of bases along the x-axis
gridy | { n>0 \| n∈R } | number of bases along the y-axis
gridz | { n>0 \| n∈R } | bin height. See bin height information and "gridz_define" below.
gridz_define | { n>0 \| n∈R } | determine what the variable "gridz" applies to based on <br> your use case. default: 0. <br> • (0) gridz is the height in # of 7mm increments (Zack) <br> • (1) gridz is the internal height in millimeters <br> • (2) gridz is the overall external height of the bin in millimeters
style_lip | {0, 1, 2} | if you are not stacking the bin, you can disable the top lip <br> to save space. <br> • (0) Regular lip <br> • (1) Subtract lip to save space <br> • (2) Disable lip while retaining height
enable_zsnap | boolean | automatically snap the bin size to the nearest 7mm increment. <br> default: true
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of Life, <br>the Universe, and Everything.)
div_base_x | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the X axis. <br>(default 1, only use integers. <br>0 means automatically guess the division)
div_base_y | { n>=0 \| n∈Z } | number of divisions per 1 unit of base along the Y axis. <br>(default 1, only use integers. <br>0 means automatically guess the division)
style_hole | { 0, 1, 2, 3 } | the style of holes in the bases <br> • (0) No holes <br> • (1) Magnet holes only <br> • (2) Magnet and screw holes - no printable slit <br> • (3) Magnet and screw holes - with printable slit
```
// Example: generate a 3x3x6 bin with 2x2 compartments, that is hollow
gridfinityLite(gridx=3, gridy=3, gridz=6, gridz_define=0, enable_lip=true, enable_zsnap=false, length=42, div_base_x=0, div_base_y=0, style_hole=1) {
cutEqual(n_divx=2, n_divy=2, style_tab=1, enable_scoop = false);
}
```

75
docs/vase.md Normal file
View file

@ -0,0 +1,75 @@
# gridfinity-spiral-vase
Some assembly required!
Adaptation of Gridfinity bins to work with spiral vase mode, as to save filament and print time. A big drawback of using vase mode for Gridfinity bins was that they would be very flimsy, and would lack the features that make Gridfinity such a good organizational tool. The goal of this implementation was to maintain the design philosophy while working under the constraints of vase mode.
![Bin](images/vase_dividers.gif)
![Bin](images/vase_base.gif)
## Instructions
Normal Gridfinity is impossible to convert to vase mode due to the geometry of the bases, meaning most existing vase mode Gridfinity models are limited to 1x1 bins. How this script gets around the impossible is to use two separate pieces. **The bin and bases must be printed separately, and then glued together to form the final bin.** While this is slightly more work, there is an added bonus to this method, as for larger bins you may not need every single grid slot to have a base, you only really need them on the corners, or the edges, with some in the middle for support. Using less bases saves filament and print time.
All parameters are global. The customizer has descriptions for all parameters. It is **essential** that the section *Printer Settings* matches your preferred slicer's settings, otherwise the model will not slice correctly. Additionally, you have to turn on the spiral vase parameter in your slicer. If you do not know what vase mode is, [this](https://www.youtube.com/watch?v=HZSFoFYpBaA) is a helpful video.
1. Change the *Printer Settings* parameters to match your slicer and printer settings.
2. Run the `gridfinityVaseBase()` module. This will generate a single spiral-capable base. Export as an STL file. You will need to print multiple of these, so it recommended to fill a base plate with them using the "complete individual objects" option (or equivilant) in your slicer. You only need to do this step initially, and then each time your printer settings change afterwards.
3. Change the bin parameters and run `gridfinityVase()` module to generate the main bin.
4. Glue bases to the bottom of the bin. I recommend superglue on the corners and the top of the magnet holes.
How your sliced files should look (cross section shown for 1x1 bin):
![Bin](images/slicer_bin.png)
![Bin](images/slicer_base.png)
Example sliced files can be found on the [Printables](https://www.printables.com/model/284371-spiral-vase-gridfinity-in-openscad) page.
## Statistics
Given how it has become a bit of a [challenge](https://www.printables.com/model/265271-gridfinity-lite-economical-plain-storage-bins) to reduce the weight and print time for these bins, here is a comparison for a large bin:
| Type | Weight | Time |
|--------------|-----------|------------|
Plain 4x2x6 Bin | 114.66g | 3h58m
Vase 4x2x6 Bin with 8 Bases | 68.31g | 2h27m
Vase 4x2x6 Bin with 4 Bases (only corners) | 56.43g | 1h59m
Clearly, vase mode is very quick and quite lightweight. However, this fundamentally means the bins will be weaker, so keep that in mind.
## Script Parameters
Parameter | Range | Description
--- | ----- | ---
type | { 0 , 1 } | generate the bin (0) or base (1)
nozzle | { n>0 \| n∈R } | extrusion width in slicer
layer | { n>0 \| n∈R } | size of layers in slicer
bottom_layer | { n>0 \| n∈Z } | number of layers on the bottom of the print
gridx | { n>0 \| n∈R } | number of bases along the x-axis
gridy | { n>0 \| n∈R } | number of bases along the y-axis
gridz | { n>0 \| n∈R } | bin height. See bin height information and <br> "gridz_define" below.
length | { n>0 \| n∈R } | length of one unit of the base. <br> default: 42 (The Answer to the Ultimate Question of <br>Life, the Universe, and Everything.)
n_divx | { n>0 \| n∈Z } | number of compartments along X
enable_holes | boolean | toggle holes inside the base
enable_zsnap | boolean | automatically snap the bin size to the nearest <br> 7mm increment. default: true
enable_lip | boolean | if you are not stacking the bin, you can disable the <br>top lip to save space. default: true
enable_scoop_chamfer | boolean | toggles the chamfer on bottom edge <br> for easy removal of items
enable_funnel | boolean | toggles funnel on back of tab. <br> acts as a finger grip and pour spout for small parts.
enable_inset | boolean | toggles an inset on the front of the bin. <br> adds strength when using scoop.
enable_pinch | boolean | toggles an outside pinch at the top lip of the bin. <br> adds strength.
gridz_define | { n>0 \| n∈R } | determine what the variable "gridz" applies to based on <br> your use case. default: 0. <br> • (0) gridz is the height in # of 7mm increments (Zack) <br> • (1) gridz is the internal height in mm <br> • (2) gridz is the overall external height of the bin in mm
style_tab | { 0, 1, 2, 3, 4, 5 } | how the tabs for labels are generated. <br> • (0) Full tabs across the entire compartment <br> • (1) automatic tabs <br> - left aligned tabs on the left edge<br> - right aligned tabs on right edge<br> - center tabs otherwise <br> • (2) left aligned tabs <br> • (3) center aligned tabs <br> • (4) right aligned tabs <br> • (5) no tabs
style_base | { 0, 1, 2, 3, 4} | specifies the locations for the "X" cutouts for bases. <br> • (0) all <br> • (1) corners <br> • (2) edges <br> • (3) automatic <br> • (4) none
a_tab | { n>0 \| n∈R } | angle of the tab
## Modules
### gridfinityVase
Generates the compartment section of the bin. No parameters as it uses the global parameters for construction.
**`gridfinityVase()`**
### gridfinityVaseBase
Generates the base section of the bin. No parameters as it uses the global parameters for construction. It only generates a single base, as all of them are the same. Use your slicer with the "outpuit individual objects" option to print a full sheet of these, or as many as you need to fit your bins.
**`gridfinityVaseBase()`**

View file

@ -39,10 +39,16 @@ distancex = 0;
// minimum length of baseplate along y (leave zero to ignore, will automatically fill area if gridy is zero) // minimum length of baseplate along y (leave zero to ignore, will automatically fill area if gridy is zero)
distancey = 0; distancey = 0;
// where to align extra space along x
fitx = 0; // [-1:0.1:1]
// where to align extra space along y
fity = 0; // [-1:0.1:1]
/* [Styles] */ /* [Styles] */
// baseplate styles // baseplate styles
style_plate = 3; // [0: thin, 1:weighted, 2:skeletonized, 3: screw together] style_plate = 0; // [0: thin, 1:weighted, 2:skeletonized, 3: screw together, 4: screw together minimal]
// enable magnet hole // enable magnet hole
enable_magnet = true; enable_magnet = true;
@ -54,12 +60,12 @@ style_hole = 2; // [0:none, 1:contersink, 2:counterbore]
// ===== IMPLEMENTATION ===== // // ===== IMPLEMENTATION ===== //
color("tomato") color("tomato")
gridfinityBaseplate(gridx, gridy, length, distancex, distancey, style_plate, enable_magnet, style_hole); gridfinityBaseplate(gridx, gridy, length, distancex, distancey, style_plate, enable_magnet, style_hole, fitx, fity);
// ===== CONSTRUCTION ===== // // ===== CONSTRUCTION ===== //
module gridfinityBaseplate(gridx, gridy, length, dix, diy, sp, sm, sh) { module gridfinityBaseplate(gridx, gridy, length, dix, diy, sp, sm, sh, fitx, fity) {
assert(gridx > 0 || dix > 0, "Must have positive x grid amount!"); assert(gridx > 0 || dix > 0, "Must have positive x grid amount!");
assert(gridy > 0 || diy > 0, "Must have positive y grid amount!"); assert(gridy > 0 || diy > 0, "Must have positive y grid amount!");
@ -68,16 +74,20 @@ module gridfinityBaseplate(gridx, gridy, length, dix, diy, sp, sm, sh) {
gy = gridy == 0 ? floor(diy/length) : gridy; gy = gridy == 0 ? floor(diy/length) : gridy;
dx = max(gx*length-0.5, dix); dx = max(gx*length-0.5, dix);
dy = max(gy*length-0.5, diy); dy = max(gy*length-0.5, diy);
off = (sp==0?0:sp==1?bp_h_bot:h_skel+(sm?h_hole:0)+(sh==0?sp!=3?0:d_screw:sh==1?d_cs:h_cb));
off = (sp==0?0:sp==1?bp_h_bot:h_skel+(sm?h_hole:0)+(sh==0?(sp!=3&&sp!=4)?0:d_screw:sh==1?d_cs:h_cb));
offsetx = dix < dx ? 0 : (gx*length-0.5-dix)/2*fitx*-1;
offsety = diy < dy ? 0 : (gy*length-0.5-diy)/2*fity*-1;
difference() { difference() {
translate([0,0,h_base]) translate([offsetx,offsety,h_base])
mirror([0,0,1]) mirror([0,0,1])
rounded_rectangle(dx, dy, h_base+off, r_base); rounded_rectangle(dx, dy, h_base+off, r_base);
gridfinityBase(gx, gy, length, 1, 1, 0, 0.5, false); gridfinityBase(gx, gy, length, 1, 1, 0, 0.5, false);
translate([0,0,h_base-0.6]) translate([offsetx,offsety,h_base-0.6])
rounded_rectangle(dx*2, dy*2, h_base*2, r_base); rounded_rectangle(dx*2, dy*2, h_base*2, r_base);
pattern_linear(gx, gy, length) { pattern_linear(gx, gy, length) {
@ -86,17 +96,19 @@ module gridfinityBaseplate(gridx, gridy, length, dix, diy, sp, sm, sh) {
if (sp == 1) if (sp == 1)
translate([0,0,-off]) translate([0,0,-off])
cutter_weight(); cutter_weight();
else if (sp == 2 || sp == 3) { else if (sp == 2 || sp == 3)
linear_extrude(10*(h_base+off), center = true) linear_extrude(10*(h_base+off), center = true)
profile_skeleton(); profile_skeleton();
} else if (sp == 4)
translate([0,0,-5*(h_base+off)])
rounded_square(length-2*r_c2-2*r_c1, 10*(h_base+off), r_fo3);
translate([0,0,-off]) { translate([0,0,-off]) {
if (sh == 1) cutter_countersink(); if (sh == 1) cutter_countersink();
else if (sh == 2) cutter_counterbore(); else if (sh == 2) cutter_counterbore();
} }
} }
if (sp == 3) cutter_screw_together(gx, gy, off); if (sp == 3 || sp ==4) cutter_screw_together(gx, gy, off);
} }
} }

View file

@ -0,0 +1,24 @@
{
"fileFormatVersion": "1",
"parameterSets": {
"New set 1": {
"$fa": "8",
"$fs": "0.25",
"div_base_x": "0",
"div_base_y": "0",
"divx": "1",
"divy": "1",
"enable_zsnap": "false",
"gridx": "1",
"gridy": "1",
"gridz": "6",
"gridz_define": "0",
"height_internal": "0",
"length": "42",
"scoop": "1",
"style_hole": "3",
"style_lip": "0",
"style_tab": "1"
}
}
}

View file

@ -43,22 +43,21 @@ divx = 1;
// number of y Divisions // number of y Divisions
divy = 1; divy = 1;
/* [Toggles] */ /* [Height] */
// internal fillet for easy part removal
enable_scoop = true;
// snap gridz height to nearest 7mm increment
enable_zsnap = false;
// how should the top lip act
style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]
/* [Other] */
// determine what the variable "gridz" applies to based on your use case // determine what the variable "gridz" applies to based on your use case
gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters] gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters]
// the type of tabs
style_tab = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
// overrides internal block height of bin (for solid containers). Leave zero for default height. Units: mm // overrides internal block height of bin (for solid containers). Leave zero for default height. Units: mm
height_internal = 0; height_internal = 0;
// snap gridz height to nearest 7mm increment
enable_zsnap = false;
/* [Features] */
// the type of tabs
style_tab = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
// how should the top lip act
style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]
// scoop weight percentage. 0 disables scoop, 1 is regular scoop. Any real number will scale the scoop.
scoop = 1; //[0:0.1:1]
/* [Base] */ /* [Base] */
style_hole = 3; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit] style_hole = 3; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit]
@ -75,7 +74,7 @@ color("tomato") {
gridfinityInit(gridx, gridy, height(gridz, gridz_define, style_lip, enable_zsnap), height_internal, length) { gridfinityInit(gridx, gridy, height(gridz, gridz_define, style_lip, enable_zsnap), height_internal, length) {
if (divx > 0 && divy > 0) if (divx > 0 && divy > 0)
cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, enable_scoop = enable_scoop); cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, scoop_weight = scoop);
} }
gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole); gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole);
@ -87,7 +86,7 @@ gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole);
// 3x3 even spaced grid // 3x3 even spaced grid
/* /*
gridfinityInit(3, 3, height(6), 0, 42) { gridfinityInit(3, 3, height(6), 0, 42) {
cutEqual(n_divx = 3, n_divy = 3, style_tab = 0, enable_scoop = true); cutEqual(n_divx = 3, n_divy = 3, style_tab = 0, scoop_weight = 0);
} }
gridfinityBase(3, 3, 42, 0, 0, 1); gridfinityBase(3, 3, 42, 0, 0, 1);
*/ */
@ -95,13 +94,13 @@ gridfinityBase(3, 3, 42, 0, 0, 1);
// Compartments can be placed anywhere (this includes non-integer positions like 1/2 or 1/3). The grid is defined as (0,0) being the bottom left corner of the bin, with each unit being 1 base long. Each cut() module is a compartment, with the first four values defining the area that should be made into a compartment (X coord, Y coord, width, and height). These values should all be positive. t is the tab style of the compartment (0:full, 1:auto, 2:left, 3:center, 4:right, 5:none). s is a toggle for the bottom scoop. // Compartments can be placed anywhere (this includes non-integer positions like 1/2 or 1/3). The grid is defined as (0,0) being the bottom left corner of the bin, with each unit being 1 base long. Each cut() module is a compartment, with the first four values defining the area that should be made into a compartment (X coord, Y coord, width, and height). These values should all be positive. t is the tab style of the compartment (0:full, 1:auto, 2:left, 3:center, 4:right, 5:none). s is a toggle for the bottom scoop.
/* /*
gridfinityInit(3, 3, height(6), 0, 42) { gridfinityInit(3, 3, height(6), 0, 42) {
cut(x=0, y=0, w=1.5, h=0.5, t=5, s=false); cut(x=0, y=0, w=1.5, h=0.5, t=5, s=0);
cut(0, 0.5, 1.5, 0.5, 5, false); cut(0, 0.5, 1.5, 0.5, 5, 0);
cut(0, 1, 1.5, 0.5, 5, false); cut(0, 1, 1.5, 0.5, 5, 0);
cut(0,1.5,0.5,1.5,5,false); cut(0,1.5,0.5,1.5,5,0);
cut(0.5,1.5,0.5,1.5,5,false); cut(0.5,1.5,0.5,1.5,5,0);
cut(1,1.5,0.5,1.5,5,false); cut(1,1.5,0.5,1.5,5,0);
cut(1.5, 0, 1.5, 5/3, 2); cut(1.5, 0, 1.5, 5/3, 2);
cut(1.5, 5/3, 1.5, 4/3, 4); cut(1.5, 5/3, 1.5, 4/3, 4);
@ -112,7 +111,7 @@ gridfinityBase(3, 3, 42, 0, 0, 1);
// Compartments can overlap! This allows for weirdly shaped compartments, such as this "2" bin. // Compartments can overlap! This allows for weirdly shaped compartments, such as this "2" bin.
/* /*
gridfinityInit(3, 3, height(6), 0, 42) { gridfinityInit(3, 3, height(6), 0, 42) {
cut(0,2,2,1,5,false); cut(0,2,2,1,5,0);
cut(1,0,1,3,5); cut(1,0,1,3,5);
cut(1,0,2,1,5); cut(1,0,2,1,5);
cut(0,0,1,2); cut(0,0,1,2);

View file

@ -33,8 +33,8 @@ divy = 2;
/* [Toggles] */ /* [Toggles] */
// snap gridz height to nearest 7mm increment // snap gridz height to nearest 7mm increment
enable_zsnap = false; enable_zsnap = false;
// enable upper lip for stacking other bins // how should the top lip act
enable_lip = true; style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]
/* [Other] */ /* [Other] */
// determine what the variable "gridz" applies to based on your use case // determine what the variable "gridz" applies to based on your use case
@ -48,23 +48,25 @@ style_hole = 0; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes -
div_base_x = 0; div_base_x = 0;
// number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division) // number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division)
div_base_y = 0; div_base_y = 0;
// thickness of bottom layer
bottom_layer = 1;
// ===== IMPLEMENTATION ===== // // ===== IMPLEMENTATION ===== //
// Input all the cutter types in here // Input all the cutter types in here
color("tomato") color("tomato")
gridfinityLite(gridx, gridy, gridz, gridz_define, enable_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole) { gridfinityLite(gridx, gridy, gridz, gridz_define, style_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole) {
cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, enable_scoop = false); cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, scoop_weight = 0);
} }
// ===== CONSTRUCTION ===== // // ===== CONSTRUCTION ===== //
module gridfinityLite(gridx, gridy, gridz, gridz_define, enable_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole) { module gridfinityLite(gridx, gridy, gridz, gridz_define, style_lip, enable_zsnap, length, div_base_x, div_base_y, style_hole) {
difference() { difference() {
union() { union() {
gridfinityInit(gridx, gridy, height(gridz, gridz_define, enable_lip, enable_zsnap), 0, length) gridfinityInit(gridx, gridy, height(gridz, gridz_define, style_lip, enable_zsnap), 0, length)
children(); children();
gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole); gridfinityBase(gridx, gridy, length, div_base_x, div_base_y, style_hole);
} }
@ -79,6 +81,8 @@ module gridfinityLite(gridx, gridy, gridz, gridz_define, enable_lip, enable_zsna
} }
translate([0,0,-1]) translate([0,0,-1])
rounded_rectangle(gridx*length-0.5005-d_wall*2, gridy*length-0.5005-d_wall*2, 1000, r_f2); rounded_rectangle(gridx*length-0.5005-d_wall*2, gridy*length-0.5005-d_wall*2, 1000, r_f2);
translate([0,0,bottom_layer])
rounded_rectangle(gridx*1000, gridy*1000, 1000, r_f2);
} }
translate([0,0,h_base+d_clear]) translate([0,0,h_base+d_clear])
rounded_rectangle(gridx*length-0.5005-d_wall*2, gridy*length-0.5005-d_wall*2, h_base, r_f2); rounded_rectangle(gridx*length-0.5005-d_wall*2, gridy*length-0.5005-d_wall*2, h_base, r_f2);

View file

@ -15,11 +15,11 @@ function height (z,d=0,l=0,s=true) = (s?((abs(hf(z,d,l))%7==0)?hf(z,d,l):hf(z,d,
// n_divy: number of y compartments (ideally, coprime w/ gridy) // n_divy: number of y compartments (ideally, coprime w/ gridy)
// set n_div values to 0 for a solid bin // set n_div values to 0 for a solid bin
// style_tab: tab style for all compartments. see cut() // style_tab: tab style for all compartments. see cut()
// enable_scoop: scoop toggle for all compartments. see cut() // scoop_weight: scoop toggle for all compartments. see cut()
module cutEqual(n_divx=1, n_divy=1, style_tab=1, enable_scoop=true) { module cutEqual(n_divx=1, n_divy=1, style_tab=1, scoop_weight=1) {
for (i = [1:n_divx]) for (i = [1:n_divx])
for (j = [1:n_divy]) for (j = [1:n_divy])
cut((i-1)*$gxx/n_divx,(j-1)*$gyy/n_divy, $gxx/n_divx, $gyy/n_divy, style_tab, enable_scoop); cut((i-1)*$gxx/n_divx,(j-1)*$gyy/n_divy, $gxx/n_divx, $gyy/n_divy, style_tab, scoop_weight);
} }
// initialize gridfinity // initialize gridfinity
@ -53,7 +53,7 @@ module gridfinityInit(gx, gy, h, h0 = 0, l) {
// 0:full, 1:auto, 2:left, 3:center, 4:right, 5:none // 0:full, 1:auto, 2:left, 3:center, 4:right, 5:none
// Automatic alignment will use left tabs for bins on the left edge, right tabs for bins on the right edge, and center tabs everywhere else. // Automatic alignment will use left tabs for bins on the left edge, right tabs for bins on the right edge, and center tabs everywhere else.
// s: toggle the rounded back corner that allows for easy removal // s: toggle the rounded back corner that allows for easy removal
module cut(x=0, y=0, w=1, h=1, t=1, s=true) { module cut(x=0, y=0, w=1, h=1, t=1, s=1) {
translate([0,0,-$dh-h_base]) translate([0,0,-$dh-h_base])
cut_move(x,y,w,h) cut_move(x,y,w,h)
block_cutter(clp(x,0,$gxx), clp(y,0,$gyy), clp(w,0,$gxx-x), clp(h,0,$gyy-y), t, s); block_cutter(clp(x,0,$gxx), clp(y,0,$gyy), clp(w,0,$gxx-x), clp(h,0,$gyy-y), t, s);
@ -235,7 +235,7 @@ module block_cutter(x,y,w,h,t,s) {
xlen = w*($gxx*length+d_magic)/$gxx-d_div; xlen = w*($gxx*length+d_magic)/$gxx-d_div;
height = $dh; height = $dh;
extent = (s && ycutfirst ? d_wall2-d_wall-d_clear : 0); extent = (abs(s) > 0 && ycutfirst ? d_wall2-d_wall-d_clear : 0);
tab = (zsmall || t == 5) ? (ycutlast?v_len_lip:0) : v_len_tab; tab = (zsmall || t == 5) ? (ycutlast?v_len_lip:0) : v_len_tab;
ang = (zsmall || t == 5) ? (ycutlast?v_ang_lip:0) : v_ang_tab; ang = (zsmall || t == 5) ? (ycutlast?v_ang_lip:0) : v_ang_tab;
cut = (zsmall || t == 5) ? (ycutlast?v_cut_lip:0) : v_cut_tab; cut = (zsmall || t == 5) ? (ycutlast?v_cut_lip:0) : v_cut_tab;
@ -301,7 +301,7 @@ module block_cutter(x,y,w,h,t,s) {
if (!((zsmall || t == 5) && !ycutlast)) if (!((zsmall || t == 5) && !ycutlast))
profile_cutter_tab(height-h_bot, tab, ang); profile_cutter_tab(height-h_bot, tab, ang);
if (!s && y == 0) if (!(abs(s) > 0)&& y == 0)
translate([ylen-extent,0,0]) translate([ylen-extent,0,0])
mirror([1,0,0]) mirror([1,0,0])
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip); profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
@ -349,7 +349,7 @@ module fillet_cutter(t = 0, c = "goldenrod") {
} }
module profile_cutter(h, l, s) { module profile_cutter(h, l, s) {
scoop = s ? (length*(($dh-2)/7+1)/12-r_f2) : 0; scoop = max(s*$dh/2-r_f2,0);
translate([r_f2,r_f2]) translate([r_f2,r_f2])
hull() { hull() {
if (l-scoop-2*r_f2 > 0) if (l-scoop-2*r_f2 > 0)

View file

@ -86,7 +86,7 @@ me = ((gridx*length-0.5)/n_divx)-nozzle*4-r_fo1-12.7-4;
m = min(d_tabw/1.8 + max(0,me), d_tabw/1.25); m = min(d_tabw/1.8 + max(0,me), d_tabw/1.25);
d_ramp = f2c*(length*((d_height-2)/7+1)/12-r_f2)+d_wall2; d_ramp = f2c*(length*((d_height-2)/7+1)/12-r_f2)+d_wall2;
d_edge = ((gridx*length-0.5)/n_divx-d_tabw-r_fo1)/2; d_edge = ((gridx*length-0.5)/n_divx-d_tabw-r_fo1)/2;
n_st = d_edge < 2 && style_tab != 0 && style_tab != 6 ? 1 : style_tab == 1 && n_divx <= 1? 0 : style_tab; n_st = gridz <= 3 ? 6 : d_edge < 2 && style_tab != 0 && style_tab != 6 ? 1 : style_tab == 1 && n_divx <= 1? 0 : style_tab;
n_x = (n_st==0?1:n_divx); n_x = (n_st==0?1:n_divx);
spacing = (gridx*length-0.5)/(n_divx); spacing = (gridx*length-0.5)/(n_divx);
@ -121,7 +121,7 @@ module gridfinityVase() {
cube([gridx*length,d_wall2,d_height-0.2],center=true); cube([gridx*length,d_wall2,d_height-0.2],center=true);
} }
if (enable_funnel) if (enable_funnel && gridz > 3)
pattern_linear((n_st==0?n_divx>1?n_divx:gridx:1), 1, (gridx*length-r_fo1)/(n_st==0?n_divx>1?n_divx:gridx:1)) pattern_linear((n_st==0?n_divx>1?n_divx:gridx:1), 1, (gridx*length-r_fo1)/(n_st==0?n_divx>1?n_divx:gridx:1))
transform_funnel() transform_funnel()
block_funnel_outside(); block_funnel_outside();
@ -135,7 +135,7 @@ module gridfinityVase() {
block_tabsupport(); block_tabsupport();
} }
if (enable_funnel) if (enable_funnel && gridz > 3)
pattern_linear((n_st==0?n_divx>1?n_divx:gridx:1), 1, (gridx*length-r_fo1)/(n_st==0?n_divx>1?n_divx:gridx:1)) pattern_linear((n_st==0?n_divx>1?n_divx:gridx:1), 1, (gridx*length-r_fo1)/(n_st==0?n_divx>1?n_divx:gridx:1))
transform_funnel() transform_funnel()
block_funnel_inside(); block_funnel_inside();
@ -330,7 +330,7 @@ module block_divider_edgecut() {
} }
module transform_funnel() { module transform_funnel() {
if (me > 6 && enable_funnel && n_st != 6) if (me > 6 && enable_funnel && gridz > 3 && n_st != 6)
transform_style() transform_style()
render() render()
children(); children();
@ -476,7 +476,7 @@ module block_tabscoop(a=m, b=0, c=0, d=-1) {
profile_tabscoop(a); profile_tabscoop(a);
translate([-gridx*length/2,-m,-m]) translate([-gridx*length/2,-m,-m])
cube([gridx*length,m-d_tabh*cos(a_tab)+0.005+c,d_height*2]); cube([gridx*length,m-d_tabh*cos(a_tab)+0.005+c,d_height*20]);
if (d >= 0) if (d >= 0)
translate([0,0,-d_tabh*sin(a_tab)+d_height+m/2+d+2.1]) translate([0,0,-d_tabh*sin(a_tab)+d_height+m/2+d+2.1])

12
mkdocs.yml Normal file
View file

@ -0,0 +1,12 @@
site_name: Gridfinity Rebuilt
theme: readthedocs
nav:
- Home: index.md
- Bins: bins.md
- Baseplates: baseplates.md
- Lite: lite.md
- Vase: vase.md
- Constants: constants.md
plugins:
- search
- autorefs