gridfinity-rebuilt-openscad.../gridfinity-rebuilt.scad
kennetek 1cb21ef1ed Added ability to make completely custom bins
Redid the system of how bins are generated and placed in order to facilitate manual construction of compartments. Added small improvement where left and right wall lips will have fillets.
2022-08-05 19:57:11 -07:00

504 lines
16 KiB
OpenSCAD

// ===== Info =====
// IMPORTANT: rendering will be better for analyzing the model if fast-csg is enabled. As of writing, this feature is only available in the development builds and not the official release of OpenSCAD, but it makes rendering only take a couple seconds, even for comically large bins. Enable it in Edit > Preferences > Features > fast-csg
// the plane that is the top of the internal bin solid is d_height+h_base above z=0
// the magnet holes can have an extra cut in them to make it easier to print without supports
// tabs will automatically be disabled when gridz is less than 3, as the tabs take up too much space
// examples are at the end of the file
// ===============
$fa = 8;
$fs = 0.25;
gridx = 3; // number of bases along x-axis
gridy = 3; // number of bases along y-axis
gridz = 6; // unit height along z-axis (2, 3, or 6, but can be any)
length = 42;// base unit (if you want to go rogue ig)
enable_holes = true; // holes on the base for magnet / screw
enable_hole_slit = true; // extra cut within holes for better slicing
color("tomato")
gridfinityEqual(n_divx = 2, n_divy = 2, style_tab = 1, enable_scoop = true);
// ===== User Modules =====
// Creates an equally divided gridfinity bin.
//
// n_divx: number of x compartments (ideally, coprime w/ gridx)
// n_divy: number of y compartments (ideally, coprime w/ gridy)
// set n_div values to 0 for a solid bin
// style_tab: tab style for all compartments. see cut()
// enable_scoop: scoop toggle for all compartments. see cut()
module gridfinityEqual(n_divx=1, n_divy=1, style_tab=1, enable_scoop=true) {
gridfinityCustom()
for (i = [1:n_divx])
for (j = [1:n_divy])
cut((i-1)*gridx/n_divx,(j-1)*gridy/n_divy, gridx/n_divx, gridy/n_divy, style_tab, enable_scoop);
}
// wrapper module
// DOES NOT CHECK FOR VALID COMPARTMENT STRUCTURE
module gridfinityCustom() {
difference() {
color("firebrick") block_bottom(d_height);
children();
}
color("orange") block_base();
color("royalblue") block_wall();
}
// Function to include in the custom() module to individually slice bins
// Will try to clamp values to fit inside the provided base size
//
// x: start coord. x=1 is the left side of the bin.
// y: start coord. y=1 is the bottom side of the bin.
// w: width of compartment, in # of bases covered
// h: height of compartment, in # of basese covered
// t: tab style of this specific compartment.
// alignment only matters if the compartment size is larger than d_tabw
// 0:full, 1:auto, 2:left, 3:center, 4:right, 5:none
// Automatic alignment will use left tabs for bins on the left edge, right tabs for bins on the right edge, and center tabs everywhere else.
// s: toggle the rounded back corner that allows for easy removal
module cut(x=0, y=0, w=1, h=1, t=1, s=true) {
cut_move(x,y,w,h)
block_cutter(clp(x,0,gridx), clp(y,0,gridy), clp(w,0,gridx-x), clp(h,0,gridy-y), t, s);
}
// Translates an object from the origin point to the center of the requested compartment block, can be used to add custom cuts in the bin
// See cut() module for parameter descriptions
module cut_move(x, y, w, h) {
cut_move_unsafe(clp(x,0,gridx), clp(y,0,gridy), clp(w,0,gridx-x), clp(h,0,gridy-y))
children();
}
// ===== Dimensions =====
h_base = 5; // height of the base
r_base = 4; // outside rounded radius of bin
r_c1 = 0.8; // lower base chamfer "radius"
r_c2 = 2.4; // upper base chamfer "radius"
h_bot = 2.2; // bottom thiccness of bin
r_fo1 = 7.5; // outside radii
r_fo2 = 3.2;
r_fo3 = 1.6;
r_hole1 = 1.5; // screw hole radius
r_hole2 = 3.25; // magnet hole radius
d_hole = 26; // center-to-center distance between holes
h_hole = 2.4; // magnet hole depth
r_f1 = 0.6; // top edge fillet radius
r_f2 = 2.8; // internal fillet radius
d_div = 1.2; // width of divider between compartments
d_wall = 0.95; // minimum wall thickness
d_clear = 0.25; // tolerance fit factor
d_tabh = 15.85; // height of tab (yaxis, measured from inner wall)
d_tabw = length; // maximum width of tab
a_tab = 36;
d_height = (gridz-1)*7 + 2;
r_scoop = length*gridz/12 - r_f2; // scoop radius
d_wall2 = r_base-r_c1-d_clear*sqrt(2);
xl = gridx*length-0.5-2*d_wall+d_div;
yl = gridy*length-0.5-2*d_wall+d_div;
// ===== Modules =====
module profile_base() {
polygon([
[0,0],
[0,h_base],
[r_base,h_base],
[r_base-r_c2,h_base-r_c2],
[r_base-r_c2,r_c1],
[r_base-r_c2-r_c1,0]
]);
}
module block_base() {
translate([0,0,h_base])
rounded_rectangle(gridx*length-0.5+0.002, gridy*length-0.5+0.002, h_bot/1.5, r_fo1/2+0.001);
pattern_linear(gridx, gridy, length)
render()
difference() {
translate([0,0,h_base])
mirror([0,0,1])
union() {
hull() {
rounded_square(length-0.5-2*r_c2-2*r_c1, h_base, r_fo3/2);
rounded_square(length-0.5-2*r_c2, h_base-r_c1, r_fo2/2);
}
hull() {
rounded_square(length-0.5-2*r_c2, r_c2, r_fo2/2);
mirror([0,0,1])
rounded_square(length-0.5, h_bot/2, r_fo1/2);
}
}
if (enable_holes)
pattern_circular(4)
translate([d_hole/2, d_hole/2, 0]) {
union() {
difference() {
cylinder(h = 2*(h_hole+(enable_hole_slit?0.2:0)), r = r_hole2, center=true);
if (enable_hole_slit)
copy_mirror([0,1,0])
translate([-1.5*r_hole2,r_hole1+0.1,h_hole])
cube([r_hole2*3,r_hole2*3, 0.4]);
}
cylinder(h = 3*h_base, r = r_hole1, center=true);
}
}
}
}
module profile_wall_sub() {
difference() {
polygon([
[0,0],
[d_wall/2,0],
[d_wall/2,d_height-1.2-d_wall2+d_wall/2],
[d_wall2,d_height-1.2],
[d_wall2,d_height+h_base],
[0,d_height+h_base]
]);
color("red")
offset(delta = 0.25)
translate([r_base,d_height,0])
mirror([1,0,0])
profile_base();
square([d_wall,0.1]);
}
}
module profile_wall() {
translate([r_base,0,0])
mirror([1,0,0])
difference() {
profile_wall_sub();
difference() {
translate([0, d_height+h_base-d_clear*sqrt(2), 0])
circle(r_base/2);
offset(r = r_f1)
offset(delta = -r_f1)
profile_wall_sub();
}
}
}
module block_wall() {
translate([0,0,h_base])
sweep_rounded(gridx*length-2*r_base-0.5-0.001, gridy*length-2*r_base-0.5-0.001)
profile_wall();
}
module block_bottom( h = 2.2 ) {
translate([0,0,h_base+0.1])
rounded_rectangle(gridx*length-0.5-d_wall/4, gridy*length-0.5-d_wall/4, d_height-0.1, r_base+0.01);
}
module cut_move_unsafe(x, y, w, h) {
translate([(x)*xl/gridx,(y)*yl/gridy,0])
translate([(-xl+d_div)/2,(-yl+d_div)/2,0])
translate([(w*xl/gridx-d_div)/2,(h*yl/gridy-d_div)/2,0])
children();
}
module block_cutter(x,y,w,h,t,s) {
v_len_tab = d_tabh;
v_len_lip = d_wall2-d_wall+1.2;
v_cut_tab = d_tabh - (2*r_f1)/tan(a_tab);
v_cut_lip = d_wall2-d_wall;
v_ang_tab = a_tab;
v_ang_lip = 45;
ylast = abs(y+h-gridy)<0.001;
xlast = abs(x+w-gridx)<0.001;
ylen = h*yl/gridy-d_div;
xlen = w*xl/gridx-d_div;
height = d_height;
extent = (s && y==0 ? d_wall2-d_wall : 0);
tab = (gridz < 3 || t == 5) ? (ylast?v_len_lip:0) : v_len_tab;
ang = (gridz < 3 || t == 5) ? (ylast?v_ang_lip:0) : v_ang_tab;
cut = (gridz < 3 || t == 5) ? (ylast?v_cut_lip:0) : v_cut_tab;
style = (t > 1 && t < 5) ? t-3 : (x == 0 ? -1 : xlast ? 1 : 0);
translate([0,ylen/2,h_base+h_bot])
rotate([90,0,-90]) {
if (gridz >= 3 && xlen - d_tabw > 4*r_f2 && t != 0) {
fillet_cutter(3,"bisque")
difference() {
transform_tab(style, xlen, ((x==0&&style==-1)||(xlast&&style==1))?v_cut_lip:0)
translate([ylast?d_wall2-d_wall:0,0])
profile_cutter(height-h_bot, ylen/2, s);
if (x==0)
translate([0,0,(xlen/2-r_f2)-v_cut_lip])
cube([ylen,height,v_cut_lip*2]);
if (xlast)
translate([0,0,-(xlen/2-r_f2)-v_cut_lip])
cube([ylen,height,v_cut_lip*2]);
}
if (t != 0 && t != 5)
fillet_cutter(2,"indigo")
difference() {
transform_tab(style, xlen, ((x==0&&style==-1)||(xlast&&style==1))?v_cut_lip:0)
difference() {
intersection() {
profile_cutter(height-h_bot, ylen-extent, s);
profile_cutter_tab(height-h_bot, v_len_tab, v_ang_tab);
}
if (ylast) profile_cutter_tab(height-h_bot, v_len_lip, 45);
}
if (x == 0)
translate([ylen/2,0,xlen/2])
rotate([0,90,0])
transform_main(2*ylen)
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
if (xlast)
translate([ylen/2,0,-xlen/2])
rotate([0,-90,0])
transform_main(2*ylen)
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
}
}
fillet_cutter(1,"seagreen")
translate([0,0,xlast?v_cut_lip/2:0])
translate([0,0,x==0?-v_cut_lip/2:0])
transform_main(xlen-(x==0?v_cut_lip:0)-(xlast?v_cut_lip:0))
translate([cut,0])
profile_cutter(height-h_bot, ylen-extent-cut-(!s&&y==0?v_cut_lip:0), s);
fillet_cutter(0,"hotpink")
difference() {
transform_main(xlen)
difference() {
profile_cutter(height-h_bot, ylen-extent, s);
if (!((gridz < 3 || t == 5) && !ylast))
profile_cutter_tab(height-h_bot, tab, ang);
if (!s && y == 0)
translate([ylen-extent,0,0])
mirror([1,0,0])
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
}
if (x == 0)
color("indigo")
translate([ylen/2,0,xlen/2])
rotate([0,90,0])
transform_main(2*ylen)
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
if (xlast)
color("indigo")
translate([ylen/2,0,-xlen/2])
rotate([0,-90,0])
transform_main(2*ylen)
profile_cutter_tab(height-h_bot, v_len_lip, v_ang_lip);
}
}
}
module transform_main(xlen) {
translate([0,0,-(xlen-2*r_f2)/2])
linear_extrude(xlen-2*r_f2)
children();
}
module transform_tab(type, xlen, cut) {
mirror([0,0,type==1?1:0])
copy_mirror([0,0,-(abs(type)-1)])
translate([0,0,-(xlen)/2])
translate([0,0,r_f2])
linear_extrude((xlen-d_tabw-abs(cut))/(1-(abs(type)-1))-2*r_f2)
children();
}
module fillet_cutter(t = 0, c = "goldenrod") {
color(c)
minkowski() {
children();
sphere(r = r_f2-t/1000);
}
}
module profile_cutter(h, length, s) {
scoop = s ? r_scoop : 0;
translate([r_f2,r_f2])
hull() {
if (length-scoop-2*r_f2 > 0)
square(0.1);
if (scoop < h) {
translate([length-2*r_f2,h-r_f2/2])
mirror([1,1])
square(0.1);
translate([0,h-r_f2/2])
mirror([0,1])
square(0.1);
}
difference() {
translate([length-scoop-2*r_f2, scoop])
if (scoop != 0) {
intersection() {
circle(scoop);
mirror([0,1]) square(2*scoop);
}
} else mirror([1,0]) square(0.1);
translate([length-scoop-2*r_f2,-1])
square([-(length-scoop-2*r_f2),2*h]);
translate([0,h])
square([2*length,scoop]);
}
}
}
module profile_cutter_tab(h, tab, ang) {
if (tab > 0)
color("blue")
offset(delta = r_f2)
polygon([[0,h],[tab,h],[0,h-tab*tan(ang)]]);
}
// ==== Utilities =====
function clp(x,a,b) = min(max(x,a),b);
module rounded_rectangle(length, width, height, rad) {
linear_extrude(height)
offset(rad)
offset(-rad)
square([length,width], center = true);
}
module rounded_square(length, height, rad) {
rounded_rectangle(length, length, height, rad);
}
module copy_mirror(vec=[0,1,0]) {
children();
if (vec != [0,0,0])
mirror(vec)
children();
}
module pattern_linear(x = 1, y = 1, spacing = 0) {
translate([-(x-1)*spacing/2,-(y-1)*spacing/2,0])
for (i = [1:x])
for (j = [1:y])
translate([(i-1)*spacing,(j-1)*spacing,0])
children();
}
module pattern_circular(n=2) {
for (i = [1:n])
rotate(i*360/n)
children();
}
module sweep_rounded(w=10, h=10) {
union() pattern_circular(2) {
copy_mirror([1,0,0])
translate([w/2,h/2,0])
rotate_extrude(angle = 90, convexity = 4)
children();
translate([w/2,0,0])
rotate([90,0,0])
linear_extrude(height = h, center = true)
children();
rotate([0,0,90])
translate([h/2,0,0])
rotate([90,0,0])
linear_extrude(height = w, center = true)
children();
}
}
// ===== Examples =====
// All examples assume gridx == 3, gridy == 3, and gridz == 6, but some may work with other settings
// 3x3 even spaced grid
//gridfinityEqual(3, 3, 0, true);
// Compartments can be placed anywhere (this includes non-integer positions like 1/2 or 1/3). The grid is defined as (0,0) being the bottom left corner of the bin, with each unit being 1 base long. Each cut() module is a compartment, with the first four values defining the area that should be made into a compartment (X coord, Y coord, width, and height). These values should all be positive. t is the tab style of the compartment (0:full, 1:auto, 2:left, 3:center, 4:right, 5:none). s is a toggle for the bottom scoop.
/*
gridfinityCustom() {
cut(x=0, y=0, w=1.5, h=0.5, t=5, s=false);
cut(0, 0.5, 1.5, 0.5, 5, false);
cut(0, 1, 1.5, 0.5, 5, false);
cut(0,1.5,0.5,1.5,5,false);
cut(0.5,1.5,0.5,1.5,5,false);
cut(1,1.5,0.5,1.5,5,false);
cut(1.5, 0, 1.5, 5/3, 2);
cut(1.5, 5/3, 1.5, 4/3, 4);
}*/
// Compartments can overlap! This allows for weirdly shaped compartments, such as this "2" bin.
/*
gridfinityCustom() {
cut(0,2,2,1,5,false);
cut(1,0,1,3,5);
cut(1,0,2,1,5);
cut(0,0,1,2);
cut(2,1,1,2);
}*/
// Areas without a compartment are solid material, where you can put your own cutout shapes. using the cut_move() function, you can select an area, and any child shapes will be moved from the origin to the center of that area, and subtracted from the block. For example, a pattern of three cylinderical holes.
/*
gridfinityCustom() {
cut(x=0, y=0, w=2, h=3);
cut(x=0, y=0, w=3, h=1, t=5);
cut_move(x=2, y=1, w=1, h=2)
pattern_linear(x=1, y=3, spacing=length/2)
cylinder(r=5, h=10*d_height, center=true);
}*/
// You can use loops as well as the bin dimensions to make different parametric functions, such as this one, which divides the box into columns, with a small 1x1 top compartment and a long vertical compartment below
/*gridfinityCustom() {
for(i=[0:gridx-1]) {
cut(i,0,1,gridx-1);
cut(i,gridx-1,1,1);
}
}*/
// Pyramid scheme bin
/*
gridfinityCustom() {
for (i = [0:gridx-1])
for (j = [0:i])
cut(j*gridx/(i+1),gridy-i-1,gridx/(i+1),1,0);
}*/