For consistancy with kubernetes services we should use the same
hostname for nodes, which is 'ansible_hostname'.
Also fixing missed 'kube-node' in templates, Calico is installed
on 'k8s-cluster' roles, not only 'kube-node'.
Calico-rr is broken for deployments with separate k8s-master and
k8s-node roles. In order to fix it we should peer k8s-cluster
nodes with calico-rr, not just k8s-node. The same for peering
with routers.
Closes#925
* Drop linux capabilities for unprivileged containerized
worlkoads Kargo configures for deployments.
* Configure required securityContext/user/group/groups for kube
components' static manifests, etcd, calico-rr and k8s apps,
like dnsmasq daemonset.
* Rework cloud-init (etcd) users creation for CoreOS.
* Fix nologin paths, adjust defaults for addusers role and ensure
supplementary groups membership added for users.
* Add netplug user for network plugins (yet unused by privileged
networking containers though).
* Grant the kube and netplug users read access for etcd certs via
the etcd certs group.
* Grant group read access to kube certs via the kube cert group.
* Remove priveleged mode for calico-rr and run it under its uid/gid
and supplementary etcd_cert group.
* Adjust docs.
* Align cpu/memory limits and dropped caps with added rkt support
for control plane.
Signed-off-by: Bogdan Dobrelya <bogdando@mail.ru>
"etcd_node_cert_data" variable is undefinded for "calico-rr" role.
This patch adds "calico-rr" nodes to task where "etcd_node_cert_data"
variable is registered.
* Add restart for weave service unit
* Reuse docker_bin_dir everythere
* Limit systemd managed docker containers by CPU/RAM. Do not configure native
systemd limits due to the lack of consensus in the kernel community
requires out-of-tree kernel patches.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Add BGP route reflectors support in order to optimize BGP topology
for deployments with Calico network plugin.
Also bump version of calico/ctl for some bug fixes.
Also place in global vars and do not repeat the kube_*_config_dir
and kube_namespace vars for better code maintainability and UX.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
skip_dnsmasq_k8s var as not needed anymore.
* Preconfigure DNS stack early, which may be the case when downloading
artifacts from intranet repositories. Do not configure
K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
not existing).
* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
was set up and before K8s apps to be created.
* Move docker install task to early stage as well and unbind it from the
etcd role's specific install path. Fix external flannel dependency on
docker role handlers. Also fix the docker restart handlers' steps
ordering to match the expected sequence (the socket then the service).
* Add default resolver fact, which is
the cloud provider specific and remove hardcoded GCE resolver.
* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
domains combined with high ndots values lead to poor performance of
DNS stack and make ansible workers to fail very often with the
"Timeout (12s) waiting for privilege escalation prompt:" error.
* Update docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
When running legacy calicoctl we do not specify calico hostname in
calico-node container thus we should not specify it in CNI config.
Also move 'legacy_calicoctl' set_fact task to the top.
In new `calicoctl` version nodes peering with routers is broken.
We need to use predictable node names for calico-node and the
same names in calico `bgpPeer` resources and CNI.
According to http://kubernetes.io/docs/user-guide/images/ :
By default, the kubelet will try to pull each image from the
specified registry. However, if the imagePullPolicy property
of the container is set to IfNotPresent or Never, then a local\
image is used (preferentially or exclusively, respectively).
Use IfNotPresent value to allow images prepared by the download
role dependencies to be effectively used by kubelet without pull
errors resulting apps to stay blocked in PullBackOff/Error state
even when there are images on the localhost exist.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Pre download all required container images as roles' deps.
Drop unused flannel-server-helper images pre download.
Improve pods creation post-install test pre downloaded busybox.
Improve logs collection script with kubectl describe, fix sudo/etcd/weave
commands.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
- Move CNI configuration from `kubernetes/node` role to
`network_plugin/canal`
- Create SSL dir for Canal and symlink etcd SSL files
- Add needed options to `canal-config` configmap
- Run flannel and calico-node containers with proper configuration
Since version 'v1.0.0-beta' calicoctl is written
in Go and its API differs from old Python based
utility. Added support of both old and new version
of the utility.
test to change the machine type
Revert "test to change the machine type"
This reverts commit 7a91f1b5405a39bee6cb91940b09a0b0f9d3aee1.
use google dns server when no upstream dns are defined
comment upstream_dns_servers
update documentation
remove deprecated kubelet flags
Revert "remove deprecated kubelet flags"
This reverts commit 21e3b893c896d0291c36a07d0414f4cb88b8d8ac.
- Allow to overwrite calico cni binaries copied from hyperkube
by the custom ones.
- Fix calico-ipam deployment (it had wrong source in rsync)
- Make copy from hyperkube idempotent (use rsync instead of cp)
- Remove some orphaned comments
* Add the retry_stagger var to tweak push and retry time strategies.
* Add large deployments related docs.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Move version/repo vars to download role.
Add container to download params, which overrides url/source_url,
if enabled.
Fix networking plugins download depending on kube_network_plugin.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Shorten deployment time with:
- Remove redundand roles if duplicated by a dependency and vice versa
- When a member of k8s-cluster, always install docker as a dependency
of the etcd role and drop the docker role from cluster.yaml.
- Drop etcd and node role dependencies from master role as they are
covered by the node role in k8s-cluster group as well. Copy defaults
for master from node role.
- Decouple master, node, secrets roles handlers and vars to be used w/o
cross references.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Hyperkube from CoreOS now ships with all binaries required for
calico and flannel (but not weave). It simplifies deployment for
some network plugin scenarios to not download CNI images.
TODO: Optionally disable downloading calico to /opt/cni/bin
Creating the unit using default settings early on
and then changing it during network_plugin section
leads to too many docker restarts and duplicated code.
Reversed Wants= dependence on docker.service so it does not
restart docker when reloading systemd
Consolidated all docker restart handlers.
* Add for docker system units:
ExecReload=/bin/kill -s HUP $MAINPID
Delegate=yes
KillMode=process.
* Add missed DOCKER_OPTIONS for calico/weave docker systemd unit.
* Change Requires= to a less strict and non-faily Wants=, add missing
Wants= for After=.
* Align wants/after in a wat if Wants=foo, After= has foo as well.
* Make wants/after docker.service to ask for the docker.socket as well.
* Move "docker rm -f" commands from ExecStartPre= to ExecStopPost=.
hooks to ensure non-destructive start attempts issued by Wants=.
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
* Add HA docs for API server.
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Use facts for kube_apiserver to not repeat code and enable LB endpoints use.
* Use /healthz check for the wait-for apiserver.
* Use the single endpoint for kubelet instead of the list of apiservers
* Specify kube_apiserver_count to for HA layout
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
kubelet via docker
kube-apiserver as a static pod
Fixed etcd service start to be more tolerant of slow start.
Workaround for kube_version to stay in download role, but not
download an files by creating a new "nothing" download entry.
Adds new boolean configuration variable for calico network plugin
`ipip`. When it's enabled calico pool is created with '--ipip'
option (IP-over-IP encapsulation across hosts).
Also refactor pool creation tasks to simplify logic and make tasks
more readable.
Improved docker reload command to wait for etcd to be
up before proceeding. Switched reload to run restart
because it can't reload if it is not guaranteed to be
in running state.
* Enforce a etcd-proxy role to a k8s-cluster group members. This
provides an HA layout for all of the k8s cluster internal clients.
* Proxies to be run on each node in the group as a separate etcd
instances with a readwrite proxy mode and listen the given endpoint,
which is either the access_ip:2379 or the localhost:2379.
* A notion for the 'kube_etcd_multiaccess' is: ignore endpoints and
loadbalancers and use the etcd members IPs as a comma-separated
list. Otherwise, clients shall use the local endpoint provided by a
etcd-proxy instances on each etcd node. A Netwroking plugins always
use that access mode.
* Fix apiserver's etcd servers args to use the etcd_access_endpoint.
* Fix networking plugins flannel/calico to use the etcd_endpoint.
* Fix name env var for non masters to be set as well.
* Fix etcd_client_url was not used anywhere and other etcd_* facts
evaluation was duplicated in a few places.
* Define proxy modes only in the env file, if not a master. Del
an automatic proxy mode decisions for etcd nodes in init/unit scripts.
* Use Wants= instead of Requires= as "This is the recommended way to
hook start-up of one unit to the start-up of another unit"
* Make apiserver/calico Wants= etcd-proxy to keep it always up
Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>
This should make things a little more composable,
by making these roles meta roles that perform no
actions by default we allow each role to own its own
resources.
variables.
1. AWS has issues with ext4 (use xfs instead for CentOS only)
2. Make sure all the centos config files are include in the systemd config
3. Make sure that network options are set in the correct file by os family
This allows downstream items like opencontrail and others change variables
in expected locations.
Each node can have 3 IPs.
1. ansible_default_ip4 - whatever ansible things is the first IPv4 address
usually with the default gw.
2. ip - An address to use on the local node to bind listeners and do local
communication. For example, Vagrant boxes have a first address that is the
NAT bridge and is common for all nodes. The second address/interface should
be used.
3. access_ip - An address to use for node-to-node access. This is assumed to
be used by other nodes to access the node and may not be actually assigned
on the node. For example, AWS public ip that is not assigned to node.
This updates the places addresses are used to use either ip or access_ip and walk
up the list to find an address.
