* Require minimum version of Kubernetes
* Remove checksums for kubernetes version 1.12
* Add kube_version to precheck output and add min required version to README
* Fix merge
* Fix defaults
* Fix typo in precheck
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Add support for arm images for hyperkube, kubeadm and cni_binary
* Add dummy etcd checksum for arm
This commit adds dummy etcd checksum for arm to avoid "no attribute" error
during setup.
* Add etcd host assert check
* Add 1.13.4 checksums of kubeadm and hyperkube for arm
* Update checksums of kubeadm and hyperkube for arm
* Add dummy checksums for calicoctl_binary_checksums dict
* disable gather_facts because it causes tests to fail
* Remove architecture check for etcd, due to unable to run tests
* Disable kube_api_anonymous_auth by default to secure the setup
* Disable metrics-server in addons. Health endpoint is slow and unstable
* Fix anonymous-auth missing in configuration
* Cleanup a bit
* Fix kube anon auth
* Download to delegate and sync files when download_run_once
* Fail on error after saving container image
* Do not set changed status when downloaded container was up to date
* Only sync containers when they are actually required
Previously, non-required images (pull_required=false as
image existed on target host) were synced to the target
hosts. This failed as the image was not downloaded to
the download_delegate and hence was not available for
syncing.
* Sync containers when only missing on some hosts
* Consider images with multiple repo tags
* Enable kubeadm images pull/syncing with download_delegate
* Use kubeadm images list to pull/sync
'kubeadm config images pull' is replaced by collecting the images
list with 'kubeadm config images list' and using the commonly
used method of pull/syncing the images.
* Ensure containers are downloaded and synced for all hosts
* Fix download/syncing when download_delegate is a kubernetes host
add the support of the folling property in azure-credential-check.yml
- azure_loadbalancer_sku: Sku of Load Balancer and Public IP. Candidate values are: basic and standard.
- azure_exclude_master_from_standard_lb: excludes master nodes from standard load balancer.
- azure_disable_outbound_snat: disables the outbound SNAT for public load balancer rules
- useInstanceMetadata: Use instance metadata service where possible
- azure_primary_availability_set: (Optional) The name of the availability set that should be used as the load balancer backend
We don't need to support upgrades from 2 year old installs,
just from the last major version.
Also changed most retried tasks to 1s delay instead of longer.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
The Stateless ClearLinux feature[1] requires the creation of folders
in /etc folder. This change ensure the existence of the
/etc/bash_completion.d/ folder for ClearLinux Distribution.
[1] https://clearlinux.org/features/stateless
This will fix error: error converting YAML to JSON: yaml: line 36: mapping values are not allowed in this context
Signed-off-by: Abdulaziz AlMalki <almalki.a@gmail.com>
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
This was already approved in #4106 but there are CI issues
with that PR due to references to kubernetes incubator.
After upgrading to Kubespray 2.8.1 with Kubeadm enabled Rook
Ceph volume provision failed due to the flexvolume plugin dir not
being correct. Adding the var fixed the issue
* Adding ability to maintain existing Encryption Secrets at Rest.
If secrets_encryption.yaml is present it will not be overriten with a new kube_encrypt_token.
This should allow for it to be set ahead of a playbook running or maintain it if cluster.yml is ran on the same cluster and the ansible host does not have access to the secrets.
* Setting existing kube_encrypt_token across all master nodes in case it was missing in one or more nodes.
Fix issue where `kubeadm join` could wait forever for joining.
Fix issue where `kubeadm join` were not reaching the user, making
impossible to find the cause of the failure.
New behaviour is to first attempt to join without bypassing the
verifications checks and to display them if needed.
If this fails it still attempts to join by ignoring the check in
order to make previous behavior.
A timeout of 60 seconds is allocated for a joining.
Related-bug: #3973
This PR ensures that the e2fsprogs and xfsprogs packages are
installed on all Kubernetes nodes and that the packages are
the latest versions. It also ensures that the nodes can
create XFS filesystems when necessary, since not all distros
install xfsprogs by default.
e2fsprogs - ext2/ext3/ext4 file system utilities
xfsprogs - Utilities for managing the XFS filesystem
* Set cluster DNS correctly in case of nodelocal dns cache
* Pass in cluster_ip based on dns mode
* Disable nodelocaldns by default
* Fix syntax error
* Fix syntax issue
* Add nodelocadns ip to vars of node installation
* Change location of nodelocaldns_ip
* Try to remove newlines from jinja template
* Add debug for config file
* Move parameter logic outside of template
* Adapt templates after feedback
* Remove debugging
Addressing the discussion started in #4064, this PR moves kubeadm and
hyperkube binaries to /usr/local/bin before running them on the master
nodes.
It is to address the case where local_release_dir points to /tmp
(kubespray default) and /tmp is mounted with noexec mode, preventing
any binaries to be run in that partition.
In role "node", we still move kubeadm to bin_dir only on the worker
nodes.
I know this is a bit hack.
If you use cloud LB, you can use kubeadm's controlPlaneEndpoint to configure kube-proxy's server field.
But for nginx-proxy, it didn't start when kubeadm init.
* Use external LB IP for external api endpoint
Use loadbalancer_apiserver.address instead of apiserver_loadbalancer_domain_name for kudadm init --apiserver-advertise-address argument
https://kubernetes.io/docs/reference/setup-tools/kubeadm/kubeadm-init/#options states apiserver-advertise-address needs to be a IPv4 or IPv6 address
* only use loadbalancer IP if it is defined
I found a potential use case where `writable` could be null and therfore
not treated like a boolean, so this adds an extra default statement to
avoid negating a non-boolean as boolean which would lead to undefined. refs #4020
In v1beta1 of `ClusterConfiguration` the extraVolumes `writable` field was changed to `readOnly` and its boolean value must be negated.
Also, the json field for `useHyperKubeImage` was incorrectly capitalized.
Right now we're consistently getting warnings about kubelet not found in
path during `kubeadm init`. We fixed this for `kubeadm join` in #3342, and this brings the change to init
as well.
- Fixed an issue where storage class host directories were looped
through excessive target hosts
- Fixes examples in the LVP `README.md` to use nested dicts instead of a
list of dicts
* Makes local volume provisioner more dynamic
* Correct variable name in local storage provisioner defaults
* Updates external-provisioner readme
* Updates variable naming to be more clear, more documentation, fixes sample inventory
* Variable refactor, untangled some jinja2 loops
* Corrects variable name
* No variable substitution in dict keys, replaced with anchor
* Fixes default storage_classes dict, inline docs
* Fixes spelling in inline docs
* Addresses comments in review
* Updates all the defaults
* Fix failing CI task
* Fixes external provisioner daemonset
* allows to override the bind addresses for controller-manager and scheduler
Useful for Prometheus metrics monitoring
* Add bind addr override support in kubeadm/v1beta1
Adds support for override of bind addresses for controller-manager
and scheduler in kubeadm/v1beta1
* Move location of bind address vars
* Remove double declaration of schedulerExtraArgs
The change implemented in #3908 remove line breaks for supplementary
addresses in kubeadm SANs, causing errors in the config file and
failure to bring cluster up. This commit reimplement line breaks in
between supplementary addresses.
- Creates and defaults an ansible variable for every configuration option in the `kubeproxy.config.k8s.io/v1alpha1` type spec
- Fixes vars that were orphaned by removing non-kubeadm
- Fixes previously harcoded kubeadm values
- Introduces a `main` directory for role default files per component (requires ansible 2.6.0+)
- Split out just `kube-proxy.yml` in this first effort
- Removes the kube-proxy server field patch task
We should continue to pull out other components from `main.yml` into their own defaults files as I did here for `defaults/main/kube-proxy.yml`. I hope for and will need others to join me in this refactoring across the project until each component config template has a matching role defaults file, with shared defaults in `kubespray-defaults` or `downloads`
* controlPlaneEndpoint set up through load balancer should be possible even in single master setups
Enable load balancer for single-master setups
Fixes an issue where single-master setups are not reachable using the usual admin.conf from outside the cluster.
controlPlaneEndpoint set up through load balancer should be possible even in single master setups
* add fix to other api versions
* remove obsolete check completely
* remove check, pass 2
* removes checks in client configuration
* delete 'and'
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
* Remove non-kubeadm deployment
* More cleanup
* More cleanup
* More cleanup
* More cleanup
* Fix gitlab
* Try stop gce first before absent to make the delete process work
* More cleanup
* Fix bug with checking if kubeadm has already run
* Fix bug with checking if kubeadm has already run
* More fixes
* Fix test
* fix
* Fix gitlab checkout untill kubespray 2.8 is on quay
* Fixed
* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path
* Readd secret checking
* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0
* fix typo
* Fix CI jobs to kubeadm again. Fix broken hyperkube path
* Fix gitlab
* Fix rotate tokens
* More fixes
* More fixes
* Fix tokens
* Set configure-cloud-routes=false as default if no network plugin is used
As configure-cloud-routes default value is `true`, so it need to be set to `false` when not required to avoid error messages like:
"Couldn't reconcile node routes: error listing routes: unable to find route table for AWS cluster"
on, for example, AWS installations that don't use cloud native routing.
* Update kube-controller-manager.manifest.j2
remove extra spaces
Introduced variable node_taints which can be set in inventory for
specific hosts or in group_vars, which generates --register-with-taints
command line argument for kubelet.
* Update defaults to match k8s 1.12 suggestions
* Test if Netchecker works with node ip instead of localhost
* Update defaults to ipvs and coredns
* Update defaults for kube_apiserver_insecure_port
* Update main.yaml
Now the `kubespray-aws-inventory.py` script always set a node_labels key
to ansible_host.
When AWS instance did not set property labels, it would be an empty
string.
The TASK `Write kubelet config file (kubeadm or non-kubeadm)` will
failed with a msg:
`AnsibleUndefinedVariable: 'unicode object' has no attribute 'items'`.
When using resolvconf_mode host_resolvconf, there is an early DNS
config stage where Kubernetes cluster DNS is not injected for host
DNS intially. Later, the cluster DNS is enabled, but we do not
need to run every task from the kubernetes/preinstall role.
* warning on meta flush_handlers
* avoid rm
* avoid "Module remote_tmp /root/.ansible/tmp did not exist and was created with a mode of 0700, this may cause issues when running as another user. To avoid this, create the remote_tmp dir with the correct permissions manually" warning on subsequent tasks using blockinfile
* is match
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
The hosts(5) manpage clearly states that the first entry is the
"canonical name", or FQDN (Fully-Qualified Domain Name):
IP_address canonical_hostname [aliases...]
By using the alias as a first entry, `hostname -f` does not return the
correct domain which breaks all sorts of unrelated functionality (it
has impact over email server configuration, for example).
* [jjo] add DIND support to contrib/
- add contrib/dind with ansible playbook to
create "node" containers, and setup them to mimic
host nodes as much as possible (using Ubuntu images),
see contrib/dind/README.md
- nodes' /etc/hosts editing via `blockinfile` and
`lineinfile` need `unsafe_writes: yes` because /etc/hosts
are mounted by docker, and thus can't be handled atomically
(modify copy + rename)
* dind-host role: set node container hostname on creation
* add "Resulting deployment" section with some CLI outputs
* typo
* selectable node_distro: debian, ubuntu
* some fixes for node_distro: ubuntu
* cpu optimization: add early `pkill -STOP agetty`
* typo
* add centos dind support ;)
* add kubespray-dind.yaml, support fedora
- add kubespray-dind.yaml (former custom.yaml at README.md)
- rework README.md as per above
- use some YAML power to share distros' commonality
- add fedora support
* create unique /etc/machine-id and other updates
- create unique /etc/machine-id in each docker node,
used as seed for e.g. weave mac addresses
- with above, now netchecker 100% passes WoHooOO!
🎉🎉🎉
- updated README.md output from (1.12.1, verified
netcheck)
* minor typos
* fix centos node creation, needs earlier udevadm removal to avoid flaky facts, also verified netcheck Ok \o/
* add Q&D test-distros.sh, back to manual /etc/machine-id hack
* run-test-distros.sh cosmetics and minor fixes
* run-test-distros.sh: $rc fix and minor formatting changes
* run-test-distros.sh output cosmetics
- Local Volume StorageClass configuration is now manged by `local_volume_provisioner_storage_classes`, a list of maps that specifies local storage classes with `name` `host_dir` and `mount_dir` keys per entry
- Tasks and templates updated to loop through local volume storage classes
- Previous defaults for path/class names were not changed
- Fixed an issue where a `kubernetes/preinstall` was creating directories inconsistently with the `kubernetes-apps/external_provisioner/local_volume_provisioner` task
* Fix the jinja expression for openstack_tenant_id
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
* Fix the dic iteration method in the kubelet template
Kubelet template rendering errors when additional Node lables are
added and using Python3. Update the method to be compatible to both
python2/3
Node lables doesn't work
* Changes to assign pod priority to kube components.
* Removed the boolean flag pod_priority_assignment
* Created new priorityclass k8s-cluster-critical
* Created new priorityclass k8s-cluster-critical
* Fixed the trailing spaces
* Fixed the trailing spaces
* Added kube version check while creating Priority Class k8s-cluster-critical
* Moved k8s-cluster-critical.yml
* Moved k8s-cluster-critical.yml to kube_config_dir
OS_PROJECT_ID is obsolete in keystone v3 and jinja expression
doesn't set openstack_tenant_id as expected because of
undefined env var. Fixed the expression.
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
remove empty when line
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
force kubeadm upgrade due to failure without --force flag
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
added nodeSelector to have compatibility with hybrid cluster with win nodes, also fix for download with missing container type
fixes in syntax and LF for newline in files
fix on yamllint check
ensure there is pin priority for docker package to avoid upgrade of docker to incompatible version
some cleanup for innecesary lines
remove conditions for nodeselector
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
