* Download to delegate and sync files when download_run_once
* Fail on error after saving container image
* Do not set changed status when downloaded container was up to date
* Only sync containers when they are actually required
Previously, non-required images (pull_required=false as
image existed on target host) were synced to the target
hosts. This failed as the image was not downloaded to
the download_delegate and hence was not available for
syncing.
* Sync containers when only missing on some hosts
* Consider images with multiple repo tags
* Enable kubeadm images pull/syncing with download_delegate
* Use kubeadm images list to pull/sync
'kubeadm config images pull' is replaced by collecting the images
list with 'kubeadm config images list' and using the commonly
used method of pull/syncing the images.
* Ensure containers are downloaded and synced for all hosts
* Fix download/syncing when download_delegate is a kubernetes host
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
* Add ansible-lint as gitlab-ci step
* Fix jinja2 syntax in include_tasks that breaks ansible-lint
* Use a block scalar to get around gitlab quoting/escaping rules
* Run ansible-lint in verbose mode in CI
Both kubedns and dnsmasq modes are long not maintained.
We should run dns_late steps at the end because sshd
makes DNS lookups during Ansible run and has 2s timeouts
for each failed lookup trying to connect to coredns before
it is ready.
* feat(external-provisioner/local-path-provisioner): adds support for local path provisioner
Helpful for local development but also in production workloads (once the
permission model is worked out) where you have redundancy built into the
software uses the PVCs (e.g. database cluster with synchronous
replication)
* feat(local-path-provisioner): adds debug flag, image tag group var
* fix(local-path-provisioner): moves image repo/tag to download role
* test(gce_centos7-flannel): enables local-path-provisioner in test case
* fix(addons): add image repo/tag to commented default values
* fix(local-path-provisioner): typo in jinja template for local path provisioner
* style(local-path-provisioner): debug flag condition re-formatted
* fix(local-path-provisioner): adds missing default value for debug flag
* fix(local-path-provisioner): syntax fix for debug if condition end
* fix(local-path-provisioner): jinja template syntax: if condition white space
Currently, the task `container_download | download images for kubeadm config images` fetches etcd image even though it's not required (etcd is bootstrapped by kubespray, not kubeadm).
`kubeadm-images.yaml` is only a subset of `kubeadm-config.yaml`, therefore ``kubeadm config images pull` will try to get all this list (including etcd)
```
# kubeadm config images list --config /etc/kubernetes/kubeadm-images.yaml
k8s.gcr.io/kube-apiserver:v1.13.2
k8s.gcr.io/kube-controller-manager:v1.13.2
k8s.gcr.io/kube-scheduler:v1.13.2
k8s.gcr.io/kube-proxy:v1.13.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.2.24
k8s.gcr.io/coredns:1.2.6
```
When using the `kubeadm-config.yaml` though, it doesn't list etcd image:
```
# kubeadm config images list --config /etc/kubernetes/kubeadm-config.yaml
k8s.gcr.io/kube-apiserver:v1.13.2
k8s.gcr.io/kube-controller-manager:v1.13.2
k8s.gcr.io/kube-scheduler:v1.13.2
k8s.gcr.io/kube-proxy:v1.13.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/coredns:1.2.6
```
This change just adds the etcd endpoints in the `kubeadm-images.yaml` to give a hint to kubeadm it doesn't need etcd image for its boostrapping as etcd is "external".
I confess it is a ugly hack, a better way would be to use a single `kubeadm-config.yaml` for both tasks, but they are triggered by different roles (`kubeadm-images.yaml` is used by download, `kubeadm-config.yaml` by kubernetes/master) at different steps and I didn't want to refactor too many things to prevent breakage.
This is specially useful for offline installation where a whitelist of container images is mirrored on a local private container registry. `k8s.gcr.io/etcd` and `quay.io/coreos/etcd` are two different repositories hosting the same images but using *different tags*!
* coreos/etcd:v3.2.24
* k8s.gcr.io/etcd:3.2.24 (note the missing 'v' in the tag name)
Addressing the discussion started in #4064, this PR moves kubeadm and
hyperkube binaries to /usr/local/bin before running them on the master
nodes.
It is to address the case where local_release_dir points to /tmp
(kubespray default) and /tmp is mounted with noexec mode, preventing
any binaries to be run in that partition.
In role "node", we still move kubeadm to bin_dir only on the worker
nodes.
* Add support for running a nodelocal dns cache
After encountering dns issues in a cluster I was recently working on I
noticed Kubernetes 1.13 introduced support for running a nodelocal dns
cache.
I believe this can usefull for more people.
73b548db06https://github.com/kubernetes/enhancements/blob/master/keps/sig-network/0030-nodelocal-dns-cache.md
* Add requested changes
* Add additional requested changes + documentation
* Add requested changes after review
* Replace incorrect variable
* Upgrade kubernetes to v1.13.0
* Remove all precense of scheduler.alpha.kubernetes.io/critical-pod in templates
* Fix cert dir
* Use kubespray v2.8 as baseline for gitlab
* Remove non-kubeadm deployment
* More cleanup
* More cleanup
* More cleanup
* More cleanup
* Fix gitlab
* Try stop gce first before absent to make the delete process work
* More cleanup
* Fix bug with checking if kubeadm has already run
* Fix bug with checking if kubeadm has already run
* More fixes
* Fix test
* fix
* Fix gitlab checkout untill kubespray 2.8 is on quay
* Fixed
* Add upgrade path from non-kubeadm to kubeadm. Revert ssl path
* Readd secret checking
* Do gitlab checks from v2.7.0 test upgrade path to 2.8.0
* fix typo
* Fix CI jobs to kubeadm again. Fix broken hyperkube path
* Fix gitlab
* Fix rotate tokens
* More fixes
* More fixes
* Fix tokens
* Remove variables defined in download role. Fixes#3799
* Cleanup some more variables
* Fix bad templating
* Minor fix
* Add dashboard to download role. Fixes#3736
When `ansible_user` is not root, using `-b` option.
And with `download_run_once` and `download_localhost` set `true`.
Ansible will executes `container_download | upload container images to nodes` task.
It uses rsync to upload images to `/tmp/release/container/`, but the
`container` directory owned by `root`.
* Support Metrics Server as addon (#3560).
* Update metrics server v0.3.1.
* Add metrics server test.
* Replace metrics server manifests with kubernetes/cluster/addons's.
* Modify metrics server manifests for kubespray.
* Follow PR#3558 node label node-role.kubernetes.io/master change
* Fix metrics server parameters base_metrics_server_... to metrics_server_...
* Fix too hard corded metrics_server_memory_per_node
* Add configurable insecure tls for metrics-apiservice
* Downloadable addon-resizer and extract parameter as variables
* Remove metrics server version from deployment name
* Metrics Server work when all masters has node role
* Download metrics-server and add-resizer container only on master
* ServiceAccount and ConfigMap is separated and fix application name
* Remove old metrics server clusterrole template
* Fix addon-resizer image specify
* Make InternalIP default for metrics_server_kubelet_preferred_address_types
Make InternalIP default because multiple preferrred address types does not work.
* Enable AutoScaler for CoreDNS
* Only use one template for dns autoscaler
* Rename a few variables for replicas and minimum pods
* Rename a few variables for replicas and minimum pods
* Remove replicas to make autoscale work
* Cleanup kubedns-autoscaler as it has been renamed
* Adds support for Multus (multiple interfaces) CNI plugin
Multus is a latin word for "Multi". As the name suggests, it acts as a
Multi plugin in Kubernetes and provides multiple network interface
support in a pod. Multus uses the concept of invoking delegates by
grouping multiple plugins into delegates and invoking them in the
sequential order of the CNI configuration file provided in json format.
* Change CNI version (0.1.0->0.3.1) of Contiv to be compatible with Multus
kube-router v0.2.1 highlights from changelog:
- IPv6 WIP but pretty close to full working functionality
- fully support network policy semantics with addition of support for
ipblock and except
* failed
* version_compare
* succeeded
* skipped
* success
* version_compare becomes version since ansible 2.5
* ansible minimal version updated in doc and spec
* last version_compare
* [jjo] add kube-router support
Fixescloudnativelabs/kube-router#147.
* add kube-router as another network_plugin choice
* support most used kube-router flags via
`kube_router_foo` vars as other plugins
* implement replacing kube-proxy (--run-service-proxy=true) via
`kube_proxy_mode: none`, verified in a _non kubeadm_enabled_
install, should also work for recent kubeadm releases via
`skipKubeProxyInstall: true` config
* [jjo] address PR#3339 review from @woopstar
* add busybox image used by kube-router to downloads
* fix busybox download groups key
* rework kubeadm_enabled + kube_router_run_service_proxy
- verify it working ok w/the kubeadm_enabled and
kube_router_run_service_proxy true or false
- introduce `kube_proxy_remove` fact, to decouple logic
from kube_proxy_mode (which affects kubeadm configmap
settings, thus no-good to ab-use it to 'none')
* improve kube-router.md re: kubeadm_enabled and kube_router_run_service_proxy
* address @woopstar latest review
* add inventory/sample/group_vars/k8s-cluster/k8s-net-kube-router.yml
* fix kube_router_run_service_proxy conditional for kube-proxy removal
* fix kube_proxy_remove fact (w/ |bool), add some needed kube-proxy tags on my and existing changes
* update kube-router tolerations for 1.12 compatibility
* add PriorityClass to kube-router DaemonSet
According to the documentation, container images are described
by vars like `foo_image_repo` and `foo_image_tag`.
The variables netcheck_{agent,server}_{img_repo,tag} do not
follow that convention.
* calico upgrade to v3
* update calico_rr version
* add missing file
* change contents of main.yml as it was left old version
* enable network policy by default
* remove unneeded task
* Fix kubelet calico settings
* fix when statement
* switch back to node-kubeconfig.yaml
Upgrade Kubernetes to V1.11.2
The kubeadm configuration file version has been upgraded from v1alpha1 to v1alpha2
Add bootstrap kubeadm-config.yaml with external etcd
* Update local-volume-provisioner-ds.yml.j2
After v1.10.2 default mountPropagation is "None"
* local_volume_provisioner version bump
v2.1.0 uses the beta nodeAffinity API by default which is available starting 1.10
* Update local-volume-provisioner-ds.yml.j2
MY_NAMESPACE env
* Update README.md
Raw block devices docs.
ingress-nginx 0.16.2 (https://github.com/kubernetes/ingress-nginx/releases/tag/nginx-0.16.2)
This patch simplify ingress-nginx deployment by default deploy on
master, with customizable options; on the other hand, remove the
additional Ansible group "kube-ingress" and its k8s node label
injection.
Reference to https://kubernetes.io/docs/concepts/services-networking/ingress/#prerequisites:
GCE/Google Kubernetes Engine deploys an ingress controller on the master.
By changing `ingress_nginx_nodeselector` plus custom k8s node
label, user could customize the DaemonSet deployment target.
If `ingress_nginx_nodeselector` is empty, will deploy DaemonSet on
every k8s node.
- cephfs-provisioner 06fddbe2 (https://github.com/kubernetes-incubator/external-storage/tree/06fddbe2/ceph/cephfs)
Noteable changes from upstream:
- Added storage class parameters to specify a root path within the backing cephfs and, optionally, use deterministic directory and user names (https://github.com/kubernetes-incubator/external-storage/pull/696)
- Support capacity (https://github.com/kubernetes-incubator/external-storage/pull/770)
- Enable metrics server (https://github.com/kubernetes-incubator/external-storage/pull/797)
Other noteable changes:
- Clean up legacy manifests file naming
- Remove legacy manifests, namespace and storageclass before upgrade
- `cephfs_provisioner_monitors` simplified as string
- Default to new deterministic naming
- Add `reclaimPolicy` support in StorageClass
With legacy non-deterministic naming style (where $UUID are generated ramdonly):
- cephfs_provisioner_claim_root: /volumes/kubernetes
- cephfs_provisioner_deterministic_names: false
- Generated CephFS volume: /volumes/kubernetes/kubernetes-dynamic-pvc-$UUID
- Generated CephFS user: kubernetes-dynamic-user-$UUID
With new default deterministic naming style (where $NAMESPACE and $PVC are predictable):
- cephfs_provisioner_claim_root: /volumes
- cephfs_provisioner_deterministic_names: true
- Generated CephFS volume: /volumes/$NAMESPACE/$PVC
- Generated CephFS user: k8s.$NAMESPACE.$PVC
Currently all the gcr.io images used in kubespray can only run on x86.
Also gcr.io has not fully support multi-arch docker images.
Add extra var "image_arch" (default is amd64) to support running other
platforms, like arm64.
Change-Id: I8e1c9af533c021cb96ade291a1ce58773b40e271
* Move front-proxy-client certs back to kube mount
We want the same CA for all k8s certs
* Refactor vault to use a third party module
The module adds idempotency and reduces some of the repetitive
logic in the vault role
Requires ansible-modules-hashivault on ansible node and hvac
on the vault hosts themselves
Add upgrade test scenario
Remove bootstrap-os tags from tasks
* fix upgrade issues
* improve unseal logic
* specify ca and fix etcd check
* Fix initialization check
bump machine size
